Crystallization of 2‐methyl‐1,3‐propanediol substituted poly(ethylene terephthalate). I. Thermal behavior and isothermal crystallization

Differential scanning calorimetry (DSC) was used to evaluate the thermal behavior and isothermal crystallization kinetics of poly(ethylene terephthalate) (PET) copolymers containing 2‐methyl‐1,3‐propanediol as a comonomer unit. The addition of comonomer reduces the melting temperature and decreases the range between the glass transition and melting point. The rate of crystallization is also decreased with the addition of this comonomer. In this case it appears that the more flexible glycol group does not significantly increase crystallization rates by promoting chain folding during crystallization, as has been suggested for some other glycol‐modified PET copolyesters. The melting behavior following isothermal crystallization was examined using a Hoffman–Weeks approach, showing very good linearity for all copolymers tested, and predicted an equilibrium melting temperature (T_m⁰) of 280.0°C for PET homopolymer, in agreement with literature values. The remaining copolymers showed a marked decrease in T_m⁰ with increasing copolymer composition. The results of this study support the claim that these comonomers are excluded from the polymer crystal during growth. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2592–2603, 2006     

Oxygen barrier properties of PET copolymers containing bis(2‐hydroxyethyl)hydroquinones

A series of poly[ethylene‐co‐bis(2‐ethoxy)hydroquinone terephthalate], PET‐co‐BEHQ copolymers were prepared by polymerization of various substituted bis(2‐hydroxyethyl)hydroquinones (BEHQs), dimethyl terephthalate (DMT), and ethylene glycol (EG). In addition to copolymers containing 6–16.5 mol % BEHQ, the homopolymer of BEHQ with dimethyl terephthalate, p(BEHQ‐T), was also prepared. The thermal and barrier properties of amorphous materials were studied. As the amount of comonomer was increased, the T_g and T_m of the materials decreased relative to those of PET. Oxygen permeability also decreased with increasing comonomer content. This improvement in barrier‐to‐oxygen permeability was primarily due to a decrease in solubility of oxygen in the polymer. All of the copolymers tested displayed similar oxygen diffusion coefficients. The decrease in solubility correlates with the decrease in T_g. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 934–942, 2003     

Biodegradability of poly(ethylene terephthalate) copolymers with poly(ethylene glycol)s and poly(tetramethylene glycol)

Poly(ethylene terephthalate) copolymers were prepared by melt polycondensation of dimethyl terephthalate and excess ethylene glycol with 10–40mol% (in feed) of poly(ethylene glycol) (E) and poly(tetramethylene glycol) (B), with molecular weight (MW) of E and B 200–7500 and 1000, respectively. The reduced specific viscosity of copolymers increased with increasing MW and content of polyglycol comonomer. The temperature of melting (T_m), cold crystallization and glass transition (T_g) decreased with the copolymerization. T_m depression of copolymers suggested that the E series copolymers are the block type at higher content of the comonomer. T_g was decreased below room temperature by the copolymerization, which affected the crystallinity and the density of copolymer films. Water absorption increased with increasing content of comonomer, and the increase was much higher for E1000 series films than B1000 series films. The biodegradability was estimated by weight loss of copolymer films in buffer solution with and without a lipase at 37°C. The weight loss was enhanced a little by the presence of a lipase, and increased abruptly at higher comonomer content, which was correlated to the water absorption and the concentration of ester linkages between PET and PEG segments. The weight loss of B series films was much lower than that of E series films. The abrupt increase of the weight loss by alkaline hydrolysis is almost consistent with that by biodegradation.     

Non‐catalyst synthesis and in vitro drug release property of poly(5,5‐dimethyl‐1,3‐dioxan‐2‐one)‐block‐methoxy poly(ethylene glycol) copolymers

A series of poly(5,5‐dimethyl‐1,3‐dioxan‐2‐one)‐block‐methoxy poly(ethylene glycol) (PDTC‐b‐mPEG) copolymers were synthesized by the ring‐opening polymerization of 5,5‐dimethyl‐1,3‐dioxan‐2‐one (DTC) in bulk, using methoxy poly(ethylene glycol) (mPEG) as initiator without adding any catalysts. The resulting copolymers were characterized by Fourier transform infrared spectra, ¹H NMR and gel permeation chromatography. The influences of some factors such as the DTC/mPEG molar feed ratio, reaction time and reaction temperature on the copolymerization were investigated. The experimental results showed that mPEG could effectively initiate the ring‐opening polymerization of DTC in the absence of catalyst, and that the copolymerization conditions had a significant effect on the molecular weight of PDTC‐b‐mPEG copolymer. In vitro drug release study demonstrated that the amount of indomethacin released from PDTC‐b‐mPEG copolymer decreased with increase in the DTC content in the copolymer. © 2013 Society of Chemical Industry     

Synthesis and hydrophilicity of poly(butylene 2,6‐naphthalate)/poly(ethylene glycol) copolymers

Poly(butylene 2,6‐naphthalate) (PBN)/poly(ethylene glycol) (PEG) copolymers were synthesized by the two‐step melt copolymerization process of dimethyl‐2,6‐naphthalenedicarboxylate (2,6‐NDC) with 1,4‐butanediol (BD) and PEG. The copolymers produced had different PEG molecular weights and contents. The structures, thermal properties, and hydrophilicities of these copolymers were studied by ¹H NMR, DSC, TGA, and by contact angle and moisture content measurements. In particular, the intrinsic viscosities of PBN/PEG copolymers increased with increasing PEG molecular weights, but the melting temperatures (T_m)_, the cold crystallization temperatures (T_cc)_, and the heat of fusion (ΔH_f) values of PBN/PEG copolymers decreased on increasing PEG contents or molecular weights. The thermal stabilities of the copolymers were unaffected by PEG content or molecular weight. Hydrophilicities as determined by contact angle and moisture content measurements were found to be significantly increased on increasing PEG contents and molecular weights. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2677–2683, 2006     

Isothermal crystallization of metallocene‐based propylene/α‐olefin copolymers

Isothermal crystallization and subsequent melting behavior of two propylene/hexene‐1 copolymers and two propylene/octene‐1 copolymers prepared with metallocene catalyst were investigated. It is found that γ‐modification is predominant in all copolymers. The Avrami exponent shows a weak dependency on comonomer content and comonomer type. At higher crystallization temperatures (T_c) the crystallization rate constant changes more rapidly with T_c and the crystallization half‐time substantially increases. Double melting peaks were also observed at high T_c, which is attributed to the inhomogeneous distribution of comonomer units along the polymer chains and the existence of crystals with different lamellar thicknesses. The equilibrium melting temperatures (T) of the copolymers were obtained by Hoffman–Weeks extrapolation. It was found that the T decreases with increasing comonomer content, but are independent of comonomer type, implying that comonomer units are excluded from the crystal lattice. Dilation of the crystal lattice was also observed, which depends on crystallization, comonomer content, and comonomer type. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 240–247, 2005     

Different behaviors of metallocene and Ziegler–Natta catalysts in ethylene/1,5‐hexadiene copolymerization

The behaviors of three different catalyst systems, TiCl₄/MgCl₂, Cp₂ZrCl₂ and Cp₂HfCl₂, were investigated in ethylene/1,5‐hexadiene copolymerization. In the Fourier transform infrared spectra of the copolymers, cyclization and branching were detected for 1,5‐hexadiene insertion in the metallocene and Ziegler–Natta systems, respectively. DSC and viscometry analyses results revealed that copolymers with lower T_m and crystallinity and higher molecular weight were obtained with metallocene catalysts. The sequence length distribution of the copolymers was investigated by using the successive self‐nucleation and annealing thermal fractionation technique. The continuous melting endotherms obtained from successive self‐nucleation and annealing analysis were employed to get information about short‐chain branching, the branching dispersity index, comonomer content and lamella thickness in the synthesized copolymers. The results established that metallocene catalysts were much more effective than Ziegler–Natta catalysts in the incorporation of 1,5‐hexadiene in the polyethylene structure. Metallocene‐based copolymers had higher short‐chain branching and comonomer content, narrower branching dispersity index and thinner lamellae. Finally, the tendency of the employed catalysts in the 1,5‐hexadiene incorporation and cyclization reaction was explored via molecular simulation. The energy results demonstrated that, in comparison to Ziegler–Natta, metallocene catalysts have a much higher tendency to 1,5‐hexadiene incorporation and cyclization. © 2018 Society of Chemical Industry     

Glass‐transition and melting behavior of poly(ethylene terephthalate)/poly(ethylene 2,6‐naphthalate) blends

The glass‐transition temperatures and melting behaviors of poly(ethylene terephthalate)/poly(ethylene 2,6‐naphthalate) (PET/PEN) blends were studied. Two blend systems were used for this work, with PET and PEN of different grades. It was found that T_g increases almost linearly with blend composition. Both the Gibbs–DiMarzio equation and the Fox equation fit experimental data very well, indicating copolymer‐like behavior of the blend systems. Multiple melting peaks were observed for all blend samples as well as for PET and PEN. The equilibrium melting point was obtained using the Hoffman–Weeks method. The melting points of PET and PEN were depressed as a result of the formation of miscible blends and copolymers. The Flory–Huggins theory was used to study the melting‐point depression for the blend system, and the Nishi–Wang equation was used to calculate the interaction parameter (χ₁₂). The calculated χ₁₂ is a small negative number, indicating the formation of thermodynamically stable, miscible blends. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 11–22, 2001     

Ethylene/1‐octadecene copolymerization using [η5:η1‐C5Me4‐4‐R1‐6‐R‐C6H2O]TiCl2 catalysts

Copolymerization of ethylene with 1‐octadecene was studied using [η⁵:η¹‐C₅Me₄‐4‐R₁‐6‐R‐C₆H₂O]TiCl₂ [R₁ = ^tBu (1), H (2, 3, 4); R = ^tBu (1, 2), Me (3), Ph (4)] as catalysts in the presence of Al(i‐Bu)₃ and [Ph₃C][B(C₆F₅)₄]. The effect of the concentration of comonomer in the feed and Al/Ti molar ratio on the catalytic activity and molecular weight of the resultant copolymer were investigated. The substituents on the phenyl ring of the ligand affect considerably both the catalytic activity and comonomer incorporation. The 1 /Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄] catalyst system exhibits the highest catalytic activity and produces copolymers with the highest molecular weight, while the 2 /Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄] catalyst system gives copolymers with the highest comonomer incorporation under similar conditions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Blends of poly(vinyl butyral‐co‐vinyl alcohol) and poly(ethylene terephthalate‐co‐ethylene naphthalate): thermal,mechanical, and morphological properties

The miscibility behavior and morphology of a series of poly(vinyl butyral‐co‐vinyl alcohol) (PVBA) copolymers containing 29, 52, 76, and 88 mol % of vinyl alcohol units with poly(ethylene terephthalate‐co‐ethylene naphthalate) (PETN) was investigated by DSC and SEM. Blends of the PETN with PVBA were prepared by coprecipitation from a chloroform/o‐chlorophenol (20/80 wt %) mixture solvent. It was found that PVBAs with different vinyl alcohol content will form an immiscible phase with the amorphous PETN in the solution‐cast films. Also, PETN and PVBA with 29 mol % vinyl alcohol (PVBA‐29) are not miscible within the whole composition range. The glass‐transition temperatures of the blends were higher than those of the two‐component polymers. The values of the tensile properties of the blend films were also better than those of the original copolymer films. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2746–2751, 2001     

Thermal behavior and tensile properties of poly(ethylene terephthalate‐co‐ethylene isophthalate)

Poly(ethylene terephthalate) (PET) and poly(ethylene isophthalate) (PEI) homopolymers were synthesized by the two‐step melt polycondensation process of ethylene glycol (EG) with dimethyl terephthalate (DMT) and/or dimethyl isophthalate (DMI), respectively. Nine copolymers of the above three monomers were also synthesized by varying the mole percent of DMI with respect to DMT in the initial monomer feed. The thermal behavior was investigated over the entire range of copolymer composition by differential scanning calorimetry (DSC). The glass transition (T_g), cold crystallization (T_cc), melting (T_m), and crystallization (T_c) temperatures have been determined. Also, the gradually increasing proportion of ethyleno‐isophthalate units in the virgin PET drastically differentiated the tensile mechanical properties, which were determined, and the results are discussed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 200–207, 2000     

The preparation of α‐bis and α,ω‐tetrakis aromatic oxazolyl‐ and carboxyl‐functionalized polymers using 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene in atom transfer radical polymerization reactions

The preparation of new compounds, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethanol and a new symmetrically disubstituted 1,1‐diphenylethylene derivative, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene, is described. 1,1‐Bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene was utilized as a dioxazolyl initiator precursor for the polymerization of styrene by atom transfer radical polymerization (ATRP) methods to produce α‐bis(oxazolyl) polystyrene. The kinetic study of the polymerization process indicated that the free radical polymerization reaction for the preparation of α‐bis(oxazolyl) polystyrene follows first‐order rate kinetics with respect to monomer consumption. α,ω‐Tetrakis(oxazolyl) polystyrene was prepared by a new, in situ, controlled/living, post‐ATRP chain‐end‐functionalization reaction which involves the direct addition of 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene to the ω‐terminus of the α‐bis(oxazolyl) polystyrene derivative, without the isolation and purification of the polymeric precursor. α‐Bis(carboxyl) and α,ω‐tetrakis(carboxyl) polystyrene derivatives were obtained by the quantitative chemical transformation of the oxazoline groups of the respective aromatic oxazolyl chain‐end‐functionalized polystyrene derivatives to the aromatic carboxyl groups. The organic precursor compounds, the dioxazolyl‐functionalized 1,1‐diphenylethylene derivative and the functionalized polymers were characterized using ¹H NMR and ¹³C NMR spectrometry and Fourier transform infrared spectroscopy, size‐exclusion and thin‐layer chromatography and non‐aqueous titration measurements. © 2014 Society of Chemical Industry     

Toluene‐vapor sorption of chemically modified methyl methacrylate‐co‐chloromethyl styrene copolymers with N,N,‐dimethyl‐1,3‐propanediamine measured with a quartz crystal microbalance

The sorption properties of toluene vapor were measured for methyl methacrylate (MMA)‐co‐chloromethyl styrene (CMSt) copolymers chemically modified with N,N‐dimethyl‐1,3‐propanediamine (DMPDA) to develop a novel quartz crystal microbalance toluene‐vapor sensor coating. The influence of the structure of the comonomer, the composition of the copolymer, and the film thickness on the toluene sorption properties were investigated. The modified MMA–CMSt copolymers were capable of large, fast, and reversible sorption versus the modified styrene–CMSt copolymers. The largest sorption capacity was obtained for MMA–CMSt–DMPDA with a 96 mol % CMSt concentration. These behaviors were explained by a combination of the plasticization of the copolymers by the introduction of bulky DMPDA at lower CMSt concentrations and the formation of a loosely crosslinked structure at higher CMSt concentrations. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of thermosensitive and superabsorbent polymer hydrogels from trialkyl‐4‐vinylbenzyl phosphonium chloride‐N‐isopropylacrylamide‐N,N′‐methylenebisacrylamide copolymers and their properties

Thermosensitive and superabsorbent polymer hydrogels were synthesized by copolymerization of three kinds of tri‐n‐alkyl vinylbenzyl phosphonium chlorides (TRVB) with different lengths of alkyl chains, N‐isopropylacrylamide (NIPAAm), and N,N′‐methylenebisacrylamide (MBAAm). The water‐absorption ability and antibacterial activity of the hydrogels against Staphylococcus aureus (S. aureus) were investigated. The water content of TRVB–NIPAAm–MBAAm copolymers decreased with increasing temperature and increased with increasing phosphonium groups in the copolymers, while it decreased with increasing chain length of the alkyl groups in the phosphonium groups as well as with an increasing degree of crosslinking in the copolymers. The TRVB–NIPAAm–MBAAm copolymers with a higher TRVB content in the copolymers exhibited higher antibacterial activity against S. aureus, but decreased with increasing chain length of alkyl groups in phosphonium groups. The TRVB–NIPAAm–MBAAm copolymers exhibited the highest antibacterial activity at 30°C against S. aureus in deionized water. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 115–124, 2001     

Synthesis and characterization of novel block copolymer from trans‐4‐hydroxy‐L‐proline and poly(ethylene glycol)

A series of novel ABA‐type block copolymers were synthesized by polymerization of trans‐4‐hydroxy‐L ‐proline (HyP) in the presence of various molecular weight poly(ethylene glycol)s (PEGs), a bifunctional OH‐terminated PEG using stannous octoate as catalyst. The optimal reaction conditions for the synthesis of the copolymers were obtained with 5 wt % stannous octoate at 140°C under vacuum (20 mmHg) for 24 h. The synthesized copolymers were characterized by IR spectroohotometry, proton nuclear magnetic resonance, differential scanning calorimetry, and Ubbelohde viscometer. The glass transition temperature (T_g) of the copolymers shifted to significantly higher temperature with increasing the number average degree of polymerization and HyP/PEO molar ratio. In contrast, the melting temperature (T_m) decreased with increasing the HyP/PEO molar ratio. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1581–1587, 2001     

Stimuli sensitive copolymer poly(N‐tert‐butylacrylamide‐ran‐acrylamide): Synthesis and characterization

Temperature sensitive random linear and crosslinked copolymers of N‐tert‐butylacrylamide (NTBA) and acrylamide (Am) were synthesized by the solution polymerization method, using regulated dosing of comonomer Am having a higher reactivity ratio (r_Am = 1.5) than NTBA (r_NTBA = 0.5). Copolymers with varying feed ratios of NTBA and Am (80 : 20 to 20 : 80 mol %) were synthesized and characterized. For the synthesis of copolymer hydrogels, N′, N‐methylene bisacrylamide (MBA) (1.13 mol %) was used along with monomers. The effect of composition on transition properties was evaluated for the linear copolymers and their hydrogels. A definite trend was observed. The incorporation of a higher percentage of the hydrophilic comonomer Am in the structure resulted in the shifting of the transition temperature towards a higher value. The transition temperatures of the copolymers synthesized with feed compositions of 80 : 20, 70 : 30, 60 : 40, 50 : 50, 40 : 60, 30 : 70, and 20 : 80 mol % were found to be 2, 10, 19, 27, 37, 45, and 58°C, respectively. Differential scanning calorimetry (DSC) studies confirmed the formation of random copolymers. The copolymers synthesized with a monomer feed ratio of 50 : 50 with regulated dosing showed a single glass transition temperature (T_g) at 168°C, while the copolymer synthesized with full dosing of Am at the beginning of the reaction showed two T_gs, at 134 and 189°C. The copolymer samples were analyzed by Fourier transform infrared spectroscopy (FTIR) for ascertaining the composition. The composition of the copolymers followed the trend of the feed ratio, but the incorporation of NTBA in the copolymers was found to be lower than the feed ratio because of lower than quantitative yields of the reactions. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 672–680, 2005     

Copolymerization of ethylene/α‐olefins over (2‐MeInd)2ZrCl2/MAO and (2‐BzInd)2ZrCl2/MAO systems

Ethylene homopolymerization and ethylene/α‐olefin copolymerization were carried out using unbridged and 2‐alkyl substituted bis(indenyl)zirconium dichloride complexes such as (2‐MeInd)₂ZrCl₂ and (2‐BzInd)₂ZrCl₂. Various concentrations of 1‐hexene, 1‐dodecene, and 1‐octadecene were used in order to find the effect of chain length of α‐olefins on the copolymerization behavior. In ethylene homopolymerization, catalytic activity increased at higher polymerization temperature, and (2‐MeInd)₂ZrCl₂ showed higher activity than (2‐BzInd)₂ZrCl₂. The increase of catalytic activity with addition of comonomer (the synergistic effect) was not observed except in the case of ethylene/1‐hexene copolymerization at 40°C. The monomer reactivity ratios of ethylene increased with the decrease of polymerization temperature, while those of α‐olefin showed the reverse trend. The two catalysts showed similar copolymerization reactivity ratios. (2‐MeInd)₂ZrCl₂ produced the copolymer with higher M_w than (2‐BzInd)₂ZrCl₂. The melting temperature and the crystallinity decreased drastically with the increase of the α‐olefin content but T_m as a function of weight fraction of the α‐olefins showed similar decreasing behavior. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 928–937, 2000     

Synthesis of ethylene/1‐octene copolymers with controlled block structures by semibatch living copolymerization

A kinetic model was developed for the living copolymerization of ethylene/1‐octene using the fluorinated FI‐Ti catalyst system, bis[N‐(3‐methylsalicylidene)‐2,3,4,5,6‐pentafluoroanilinato] TiCl₂/dried methylaluminoxane is presented. The model was first validated by batch polymerization experiments. Kinetic parameters were estimated from the model correlations with online ethylene consumption rates and end‐of‐batch copolymer molecular weight. The model was then used to calculate the microstructural properties of ethylene/1‐octene copolymers with controlled composition profiles (uniform, diblock, and step triblock), which were synthesized using sequential comonomer feeding policies in semibatch copolymerization. The synthesized block copolymers had the exact composition distributions and molecular weights as the model simulated. It was demonstrated that the polymer chain microstructure in the living copolymerization of olefins could be precisely regulated by using semibatch comonomer feeding policies. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4686–4695, 2013     

Synthesis and characterization of homo‐ and copolymers of 3‐(2‐cyano ethoxy)methyl‐ and 3‐[methoxy(triethylenoxy)]methyl‐3′‐methyl‐oxetane

Two oxetane‐derived monomers 3‐(2‐cyanoethoxy)methyl‐ and 3‐(methoxy(triethylenoxy)) methyl‐3′‐methyloxetane were prepared from the reaction of 3‐methyl‐3′‐hydroxymethyloxetane with acrylonitrile and triethylene glycol monomethyl ether, respectively. Their homo‐ and copolyethers were synthesized with BF₃· Et₂O/1,4‐butanediol and trifluoromethane sulfonic acid as initiator through cationic ring‐opening polymerization. The structure of the polymers was characterized by FTIR and¹H NMR. The ratio of two repeating units incorporated into the copolymers is well consistent with the feed ratio. Regarding glass transition temperature (T_g), the DSC data imply that the resulting copolymers have a lower T_g than pure poly(ethylene oxide). Moreover, the TGA measurements reveal that they possess in general a high heat decomposition temperature. The ion conductivity of a sample (P‐AN 20) is 1.07 × 10^?5 S cm^?1 at room temperature and 2.79 × 10^?4 S cm^?1 at 80 °C, thus presenting the potential to meet the practical requirement of lithium ion batteries for polymer electrolytes. Copyright © 2005 Society of Chemical Industry     

Thermoresponsive poly(γ‐propyl‐l‐glutamate)‐graft‐(oligo ethylene glycol)s: Synthesis,characterization, and properties

A series of thermoresponsive poly(γ‐propyl‐_L‐glutamate)‐graft‐(oligo ethylene glycol)s (PPLG‐g‐OEGs) with different main‐chain and side‐chain lengths have been synthesized via copper‐mediated alkyne‐azide 1,3‐dipolar cycloaddition between poly(γ‐azidopropyl‐_L‐glutamate)s (PAPLG) and propargyl terminated oligo ethylene glycols (Pr‐OEGs). Fourier transform infrared spectrometer analysis revealed that PAPLG₁₀ adopted 39.4% β‐sheet, 47.4% α‐helix, and 13.2% random coil while PAPLG with longer main‐chain length (DP = 37 and 88) and PPLG‐g‐OEGs adopted exclusive α‐helix in the solid state. Circular dichroism analysis revealed that PPLG‐g‐OEGs adopted α‐helical conformations with helicities in the range of 50～100%. The thermoresponsive behaviors of PPLG‐g‐OEGs in water have been studied by dynamic light scattering. The polymer concentration, main‐/side‐chain length, and helicity collectively affected their cloud point temperatures. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41022.