Three in one: β‐cyclodextrin,nanohydroxyapatite, and a nitrogen‐rich polymer integrated into a new flame retardant for poly (lactic acid)

A new halogen‐free flame retardant was developed by integrating β‐cyclodextrin, triazin ring, and nanohydroxyapatite (BSDH) into a hybrid system. A β‐cyclodextrin was grafted to a commercially available SABO®STAB UV94 via an aromatic deanhydrate. The BSDH was prepared in situ in the presence of β‐cyclodextrin‐grafted nitrogen‐rich precursor. The resulting hybrid was applied as a flame retardant for poly(lactic acid) (PLA) and compared for performance with ammonium polyphosphate (APP). PLA composites containing BSDH and APP, individually or simultaneously, were examined for thermal degradation and flammability by TGA, cone calorimeter, and pyrolysis‐combustion flow calorimetry. TGA results confirmed enhancement of thermal stability of PLA with assistance of BSDH compared to APP. The gases evolved during thermal degradation were assessed by a thermogravimetric analysis and Fourier infrared spectroscopy device. APP revealed catalytic effect to initiate PLA degradation, while BSDH continued to release some gases at elevated temperatures. The flame retardancy of PLA/APP/BSDH blend containing only 10 wt.% of additives was significantly improved. In cone calorimetric tests, a significant fall in peak of heat release rate was observed for this sample, 49% more than that of neat PLA, which was indicative of more gas and condensed phase reflected in more char residue. The corresponding PLA/APP sample, however, showed 17% improvement, as compared to neat PLA. Also, total heat release rate of PLA/APP/BSDH was 45 MJ.m^?2, whereas those of PLA and PLA/APP were 89 and 65 MJ.m^?2, respectively. BSDH and APP showed a synergistic effect on improving the flame retardancy of PLA composites.     

Behaviour of poly(β-hydroxybutyric acid) in dilute solution

The refractive indices of poly(β-hydroxybutyric acid) (PHB) at four wavelengths have been determined via different procedures. Viscometric and light scattering measurements have been made on solutions of eight samples of PHB (M_w = 20·9 × 10³?929 × 10³ g mol^?1) in 2,2,2-trifluoroethanol. From the dependences of intrinsic viscosity and of radius of gyration on molar mass, the conformation of PHB in dilute solution is shown to be that of a random coil. The findings are discussed in relation to existing conflicting evidence on the conformation of this polymer.     

Control strategy of pH,dissolved oxygen concentration and stirring speed for enhancing β‐poly (malic acid) production by Aureobasidium pullulans ipe‐1

BACKGROUND: β‐poly(malic acid) (PMLA) can be used as a pro‐drug or for a drug‐delivery system. Effects of pH, dissolved oxygen concentration (DO) and stirring speed were investigated to improve PMLA production by A. pullulans ipe‐1. RESULTS: The strain produced a high PMLA concentration when pH and DO remained at about 6.0 and above 70%, respectively, and the yeast‐like cells were the main PMLA producers. To further promote PMLA production, the cultivation could be divided into three phases. In phase I, cell growth was accelerated by maintaining high DO (>70%) with a constant stirring speed of 800 rpm. In phase II, PMLA production was increased by controlling DO at 70% using the automatically controlled stirring speed. In phase III, PMLA production on per gram of glucose (Y_p/s) was enhanced by keeping DO at 70%, and using a low stirring speed to decrease cell growth. Compared with batch cultures, a higher PMLA yield was obtained with this strategy, i.e. PMLA production and Y_p/s increased by 15% and 18%, respectively. CONCLUSION: Control strategies for pH, DO and stirring speed provide a good reference for process development and optimization of PMLA production. © 2012 Society of Chemical Industry     

Synthesis of a novel linear water‐soluble β‐cyclodextrin polymer

A novel linear water‐soluble β‐cyclodextrin polymer has been prepared by grafting β‐cyclodextrin on poly[(methyl vinyl ether)‐alt‐(maleic anhydride)]. First, lithium hydride was used to obtain the mono‐alkoxide β‐CD. Grafting of β‐CD derivatives to the polymer backbone was then carried out by an esterification method. Using this method, polymers containing various amounts of β‐CD were synthesized. The resulting grafted polymers were characterized by two complementary methods, ¹H NMR and IR spectroscopy. The first was used to calculate the degree of substitution for the low amounts of β‐CD. The second method was very useful to evaluate the degree of substitution and the molar ratio of CD especially for high amounts of grafting. Our results indicate good agreement between both methods for intermediate rates. Copyright © 2004 Society of Chemical Industry     

Addition of α‐tocopherol on poly(lactic acid): Thermal,mechanical, and sorption properties

This work investigates the effect of the addition of a well‐known antioxidant, α‐tocopherol in poly (lactic acid) flexural and barrier properties. For that purpose, films of poly(lactic acid) enriched with 0, 2.2, and 4.4% of α‐tocopherol were prepared. Differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis were used to characterize the changes in the mechanical and thermal properties. The sorption of oxygen and carbon dioxide in the prepared enriched films of poly(lactic acid) was measured at different temperatures between 283 and 313 K and pressures up to atmospheric pressure using a Quartz Crystal Microbalance. Although no significant changes were found in the mechanical and thermal properties, the addition of α‐tocopherol promotes an increasing in the oxygen sorption and the convex shape of the isotherms indicate a strong interaction gas‐polymer. Regarding the sorption of carbon dioxide, no pronounced effect was found. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

β‐cyclodextrin/poly(vinyl alcohol) hydrogels containing phenylpropionic acid and naphthylamine: dual pH‐sensitive release

Hydrogel composed of β‐cyclodextrin (β‐CD) and poly(vinyl alcohol) was prepared in a strong alkaline condition using epichlorohydrin as a crosslinker. Phenylpropionic acid (PPA) and naphthylamine (NA) were loaded in the cavities of β‐CD residues to endow the hydrogel with a dual pH‐sensitive characteristic. In release experiments using fluorescein isothiocyanate‐dextran (FITC‐dextran) as a dye, PPA/NA‐loaded hydrogel exhibited an extensive release not only in acidic conditions (e.g. pH 3.0) but also in alkaline conditions (e.g. pH 9.0). PPA and NA will be highly ionized at the alkaline and the acidic pH and they could promote swelling of the hydrogel, causing an extensive release at those pH values. However, the release was suppressed at mid pH values (e.g. pH 5.0 and pH 7.4), possibly due to the formation of salt bridges between PPA^? and NA⁺. In fact, the degree of swelling at mid pH was lower than that observed at strong acidic pH and alkaline pH. According to SEM images, the pore size and the texture compactness of hydrogels which had been subjected to swelling at different pH values could also account for the dual pH‐sensitive releases. The hydrogels exhibited dual pH sensitivities in terms of FITC‐dextran release and swelling. These hydrogels might be used as a pH‐sensitive vehicle for water‐soluble drugs. © 2013 Society of Chemical Industry     

Synthesis and properties of hydrogels of poly(acrylic‐co‐acroloyl β‐cyclodextrin)

Novel acrylic monomers (β‐CD‐A and β‐CD‐6‐EA) containing β‐cyclodextrin (β‐CD) with different extent of substitution were prepared by using dicyclohexylcarbodiimide (DCC) as a condensation agent at room temperature. Two kinds of functional hydrogels were also synthesized by copolymerization of β‐CD‐A and β‐CD‐6‐EA with acrylic acid (AAc) using a redox initiator system in aqueous solution. The nuclear magnetic resonance (¹H NMR), infrared spectroscopy (IR), thermogravimetric analysis (TGA) were employed to character the molecular structures of β‐CD modified monomers and their copolymers. The swelling experiments indicate that the hydrogels with different equilibrium swelling ratio (ESR) possess obvious pH‐sensitivity and distinct dynamic swelling behavior. Using an anti‐cancer drug, chlorambucil (CHL), able to form complexes with β‐CD in water, as a model compound, the controlled drug release behaviors of these hydrogels were investigated. The release behavior of CHL from two kinds of hydrogels synthesized reveals that the release rate of CHL can be effectively controlled by pH values, cross‐linking density, and β‐CD content. In addition, it is found that the β‐CD with the proper frame and concentration can increase release efficiency of CHL from the hydrogels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Swelling behaviour of poly(α‐hydroxyacrylic acid) gel

Poly(α‐hydroxy acrylic acid) (PHA) and poly(acrylicacid) (PAA) gels were prepared by irradiating the respective 15 wt% aqueous solutions with γ‐rays. Swelling ratios for PHA gel were measured as a function of pH and divalent cation (Mg²⁺, Ca²⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺) concentration C₂ in the external solution to provide a comparison with the results for PAA gels. It was found that the swelling ratio of PHA gel steeply increases between pH 2 and 4, followed by a gradual swelling in the higher pH region. The corresponding steep swelling of PAA gel was observed at pH 3–6. Cation specificity in the equilibrium swelling ratio at a lower C₂ value (1.0 × 10⁻³ M) was approximately consistent with the binding selectivity in the solution system. Typically, the swelling ratio of PHA gel in the presence of Ca²⁺ was significantly lower than in the Mg²⁺ system, while the difference was slight for PAA gel. The response of the swelling ratio to changes in pH and C₂ was analysed as a first order relaxation to estimate the time constants. The (de)swelling kinetics measured by both the pH and C₂ jump were qualitatively interpreted in terms of main‐chain stiffness and intermolecular hydrogen bonding in the respective polymers. © 2000 Society of Chemical Industry     

Reorganization of the chain packing between poly(ethylene isophthalate) chains via coalescence from their inclusion compound formed with γ‐cyclodextrin

Amorphous poly(ethylene isophthalate) (PEI) was synthesized, and was used for preparing an inclusion compound (IC) with γ‐cyclodextrin (γ‐CD). Coalesced polymer was produced by washing the PEI‐γ‐CD‐IC with hot water. Wide angle X‐ray diffraction, Fourier transform infrared, and differential scanning calorimetry analyses were employed to verify formation of PEI‐γ‐CD‐IC and to compare the as‐synthesized and coalesced PEI samples. These observations suggested that the conformations and morphology/chain‐packing of PEI were changed via coalescence from its γ‐CD inclusion compound. The glass‐transition temperature of the amorphous coalesced PEI is 15–20°C higher than the T_g observed for the as‐synthesized sample, even when observed in the second heat after cooling from well above T_g at 260°C. The amorphous as‐synthesized PEI retains its randomly‐coiling structure, while coalesced PEI has at least partially retained, the highly extended and parallel chains from the narrow channels of the inclusion compound, resulting in better/tighter packing among the PEI chains manifested by a higher T_g. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6049–6053, 2006     

Synthesis and characterization of polyrotaxanes comprising α‐cyclodextrins and poly(ε‐caprolactone) end‐capped with poly(butyl methacrylate)s

Biodegradable polyrotaxane‐based triblock copolymers were synthesized via the bulk atom transfer radical polymerization (ATRP) of n‐butyl methacrylate (BMA) initiated with polypseudo‐rotaxanes (PPRs) built from a distal 2‐bromoisobutyryl end‐capped poly(ε‐caprolactone) (Br‐PCL‐Br) with α‐cyclodextrins (α‐CDs) in the presence of Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 45 ºC. The structure was characterized in detail by means of ¹H NMR, gel permeation chromatography, wide‐angle X‐ray diffraction, DSC and TGA. When the feed molar ratio of BMA to Br‐PCL‐Br was changed from 128 to 300, the degree of polymerization of PBMA blocks attached to two ends of the PPRs was in the range 382 ? 803. Although about a tenth of the added α‐CDs were still threaded onto the PCL chain after the ATRP process, the movable α‐CDs made a marked contribution to the mechanical strength enhancement, blood anticoagulation activity and protein adsorption repellency of the resulting copolymers. Meanwhile, they could also protect the copolymers from the attack of H₂O and Lipase AK Amano molecules, exhibiting a lower mass loss as evidenced in hydrolytic and enzymatic degradation experiments. © 2013 Society of Chemical Industry     

A facile and practical approach to randomly methylated β‐cyclodextrin

BACKGROUND: Because of its high demand for use in pharmaceutical products, cosmetics, soil remediation technologies, etc., randomly methylated β‐cyclodextrin (RM‐β‐CD) is one of the most important cyclodextrin (CD) derivatives. The aim of this present work is to use a green and commercially available approach to obtain RM‐β‐CD. Compared with other methylated CDs, RM‐β‐CD with an asymmetric molecular structure has higher water solubility. When the degree of substitution (DS) is about 1.8, the solubility tends to increase with increasing temperature and is suitable for pharmaceutical applications. RESULTS: RM‐β‐CD was synthesized using a green approach with ideal DS equal to 1.79. The one step process of β‐cyclodextrin methylation by CH₃Cl instead of (CH₃)₂SO₄ at mild temperature (80 °C) and pressure (1.60 MPa) with a good yield (78%), is convenient and environmentally friendly. The mixture of RM‐β‐CD obtained contained five compounds with various DS, from which the main compound with a DS equal to 1.8 was separated by column chromatography. The compounds were carefully characterized by infra‐red, NMR and mass spectrometry. CONCLUSIONS: The one‐step process to RM‐β‐CDs with CH₃Cl is more economical, more efficient and less noxious than the usual method using (CH₃)₂SO₄. Moreover, this approach avoids some poisonous residual materials and meets the demand for protecting the environment. Copyright © 2009 Society of Chemical Industry     

Miscibility of block copolymers of poly(ε‐caprolactone) and poly(ethylene glycol) with poly(3‐hydroxybutyrate) as well as the compatibilizing effect of these copolymers in blends of poly(ε‐caprolactone) and poly(3‐hydroxybutyrate)

Atactic poly(3‐hydroxybutyrate) (a‐PHB) and block copolymers of poly(ethylene glycol) (PEG) with poly(ε‐caprolactone) (PCL‐b‐PEG) were synthesized through anionic polymerization and coordination polymerization, respectively. As demonstrated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) measurements, both chemosynthesized a‐PHB and biosynthesized isotactic PHB (i‐PHB) are miscible with the PEG segment phase of PCL‐b‐PEGs. However, there is no evidence showing miscibility between both PHBs and the PCL segment phase of the copolymer even though PCL has been block‐copolymerized with PEG. Based on these results, PCL‐b‐PEG was added, as a compatibilizer, to both the PCL/a‐PHB blends and the PCL i‐PHB blends. The blend films were obtained through the evaporation of chloroform solutions of mixed components. Excitingly, the improvement in mechanical properties of PCL/PHB blends was achieved as anticipated initially upon the addition of PCL‐b‐PEG. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2600–2608, 2001     

Pyromellitic dianhydride‐modified β‐cyclodextrin microspheres for Pb(II) and Cd(II) adsorption

In this work, the pyromellitic dianhydride (PMDA)‐grafted β‐cyclodextrin (β‐CD) microspheres have been prepared for the removal of lead and cadmium metal ions in aqueous solution by a batch‐equilibration technique. The effects of the pH of the solution, contact time, and initial metal concentration were studied. The adsorption capacities for the two metal ions increase significantly as a large number of carboxyl groups are present on the microspheres surface. The equilibrium process is better described by the Langmuir isotherm than the Freundlich isotherm. The maximum adsorption capacities are 135.69 and 92.85 mg g^?1 for Pb(II) and Cd(II), respectively. Kinetic studies show good correlation coefficients for a pseudosecond‐order kinetic model, confirming that the sorption rate is controlled by chemical adsorption. The regeneration of the adsorbent can be carried out by treating the loaded microspheres with 0.2 (mol L^?1) HCl obtaining high desorption rate for the two metal ions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Cationic copolymers of α,β‐poly‐(N‐2‐hydroxyethyl)‐DL‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy): synthesis and characterization

In the present study the derivatization of two water‐soluble synthetic polymers, α,β‐poly(N‐2‐hydroxyethyl)‐DL ‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy), with glycidyltrimethylammonium chloride (GTA) is described. This reaction permits the introduction of positive charges in the macromolecular chains of PHEA and PAHy in order to make easier the electrostatic interaction with DNA. Different parameters affect the reaction of derivatization, such as GTA concentration and reaction time. PHEA reacts partially and slowly with GTA; on the contrary the reaction of PAHy with GTA is more rapid and extensive. The derivatization of PHEA and PAHy with GTA is a convenient method to introduce positive groups in their chains and it permits the preparation of interpolyelectrolyte complexes with DNA. © 2000 Society of Chemical Industry     

Synthesis and characterization of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers with dibutylmagnesium as catalyst

Two series of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers were prepared by the ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) and dibutylmagnesium in 1,4‐dioxane solution at 70°C. The triblock structure and molecular weight of the copolymers were analyzed and confirmed by ¹H NMR, ¹³C NMR, FTIR, and gel permeation chromatography. The crystallization and thermal properties of the copolymers were investigated by wide‐angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). The results illustrated that the crystallization and melting behaviors of the copolymers were depended on the copolymer composition and the relative length of each block in copolymers. Crystallization exothermal peaks (T_c) and melting endothermic peaks (T_m) of PEG block were significantly influenced by the relative length of PCL blocks, due to the hindrance of the lateral PCL blocks. With increasing of the length of PCL blocks, the diffraction and the melting peak of PEG block disappeared gradually in the WAXD patterns and DSC curves, respectively. In contrast, the crystallization of PCL blocks was not suppressed by the middle PEG block. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Largely improved tensile extensibility of poly(L‐lactic acid) by adding poly(ε‐caprolactone)

Poly(L ‐lactic acid) (PLLA) has good biocompatibility, biodegradability and physical properties. However, one of the drawbacks of PLLA is its brittleness due to the stiff backbone chain. In this work, a largely improved tensile toughness (extensibility) of PLLA was achieved by blending it with poly(ε‐caprolactone) (PCL). To obtain a good dispersion of PCL in the PLLA matrix, blends were prepared via a solution‐coagulation method. An increase in extensibility of PLLA of more than 20 times was observed on adding only 10 wt% of PCL, accompanied by a slight decrease in tensile strength. However, annealing of the samples led to a sharp decrease of extensibility due to phase separation and a change of crystalline structure. To conserve the good mechanical properties of PLLA/PCL blends, the blends were crosslinked via addition of dicumyl peroxide during the preparation process. For the crosslinked blend films, the extensibility was maintained nearly at the original high value even after annealing. Morphological analysis of cryo‐fractured and etched‐smoothed surfaces of the PLLA/PCL blends was carried out using scanning electron microscopy. Differential scanning calorimetry and polarized light microscopy experiments were used to check the possible change of crystallinity, melting point and crystal morphology for both PLLA and PCL after annealing. The results indicated that the combination of solution‐coagulation and crosslinking resulted in a good and stable dispersion of PCL in the PLLA matrix, which is considered as the main reason for the observed improvement of tensile toughness. Copyright © 2010 Society of Chemical Industry     

Preparation of poly(ε‐caprolactone)/poly(ε‐caprolactone‐co‐lactide) (PCL/PLCL) blend filament by melt spinning

Poly(ε‐caprolactone)/poly(ε‐caprolactone‐co‐lactide) (PCL/PLCL) blend filaments with various ratios of PCL and PLCL were prepared by melt spinning. The effect of PLCL content on the physical properties of the blended filament was investigated. The melt spinning of the blend was carried out and the as spun filament was subsequently subjected to drawing and heat setting process. The addition of PLCL caused significant changes in the mechanical properties of the filaments. Crystallinity of blend decreased with the addition of PLCL as observed by X‐ray diffraction (XRD) and differential scanning calorimetry (DSC). Scanning electron microscopy (SEM) revealed that the fracture surface becomes rougher at higher PLCL content. It may be proposed that PCL and PLCL show limited interaction within the blend matrix. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effect of macromer synthesis time on the properties of the resulting poly(β‐amino ester) degradable hydrogel

Poly(β‐amino ester) biodegradable hydrogels are common in biomedical applications because of their tunable properties and similarities to natural soft tissue. Previous work has shown property adjustments through the choice of monomers, the ratio between monomers and the addition of a crosslinking component. Here, we show that the reaction time for the creation of the macromer can affect the resulting hydrogel properties, and thus provides another method of tuning properties. Macromer was created through the reaction of isobutylamine with poly(ethylene glycol) diacrylate (n = 400). The reaction progress was analyzed using IR and GPC analysis. Hydrogels were created through UV photopolymerization from macromers synthesized for 24, 36, and 48 h. The degradation, compressive moduli, and swelling were measured in an aqueous solution. All showed significant differences between hydrogels of different macromer synthesis times. These differences likely stem from the incomplete macromer synthesis reaction and resulting PEG‐rich regions in hydrogels from shorter synthesis times. These regions will not readily degrade, but do increase the mechanical properties and extent of swelling. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011