Studies on syntheses and properties of chelating resins based on chitosan

Chelating resins have some good adsorption properties for some metal ions, especially for several noble metal ions. Thus to retrieve rare metals using chelating resins is always an interesting project for chemistry researchers. In this study we synthesized a series of chelating resins based on chitosan and investigated adsorbing capacities, adsorption rates, and adsorption selectivities for Ag(I), Au(III), Pd(II), Pt(IV), Cu(II), Hg(II), and Zn(II). The results indicate that the resins have remarkable adsorbing capacities and adsorption rates for four noble metal ions and Hg(II). For instance, one of the resins adsorbs Au(III) and the adsorbing capacity is up to 7.11 mmol/g. However, the adsorbing capacities of the resins for Cu(II) and Zn(II) are much less than for the noble metal ions. Finally, x-ray photoelectron spectroscopy studies of a chelating resin and its metal chelates were made. The result reveals that the basis of the chelations is a chemical process. © 1996 John Wiley & Sons, Inc.     

Copolymeric network crown ether resins with pendent functional group: Synthesis and adsorption for metal ions

Three network crown ether resins with a high content of pendent functional groups were prepared and characterized by IR, elemental analysis, and thermal analysis. The slight variance of the thermal stability of the resins was related to the kind and content of the pendent functional group. The adsorption capacity of the resins for Mg(II), Cu(II), Co(II), Pb(II), and Hg(II) was determined. Toward Hg(II), the adsorption capacity of the resins was high and the adsorption process was easy and spontaneously performed. The XPS study showed that the adsorption of the NCR–SN resin toward Cu(II), Pb(II), and Hg(II) was mainly the coordinate interactions between the ligand atom (S, N) of the pendent functional groups and the metal ions. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 1457–1465, 2000     

Preparation and coordination with Hg(II) of sulfur‐ and 2‐amino‐pyridine‐containing chelating resin

A novel chelating resin anchoring 2‐amino‐pyridine on macroporous crosslinked polystyrene beads via a sulfur‐containing spacer (PVBS‐AP) has been synthesized and its structures were characterized by FTIR, scanning electron microscopy, porous structure analysis, and elementary analysis. The results of scanning electron microscopy and pores analysis demonstrated that PVBS‐AP resin had meso‐macro porous structure. Its adsorption properties for Hg(II), Pd(II), Ni(II), Cu(II), Zn(II), Pb(II), and Cd(II) were investigated. Some factors affecting the adsorption of PVBS‐AP resin for Hg(II), such as temperature, contact time, ion concentration, and pH were also studied. The results showed that the increasing of temperature was beneficial to adsorption and Langmuir model was much better than Freundlich model to describe the isothermal process. PVBS‐AP resin had good adsorption selectivity for Hg(II). It could selective adsorb Hg(II) from such binary ions system as Hg(II)‐Ni(II), Hg(II)‐Zn(II), and Hg(II)‐Pb(II), their selective coefficients are α_Hg/Ni = ∞, α_Hg/Zn = 28.1, α_Hg/Pb = ∞, respectively. Five adsorption–desorption cycles demonstrate that this resin were suitable for reuse without considerable change in adsorption capacity. POLYM. ENG. SCI., 47:721–727, 2007. © 2007 Society of Plastics Engineers.     

Resins containing amino and carboxylic acid groups. Synthesis,characterization, and metal ion retention properties

The crosslinked poly[3‐(methacryloylamino)propyl]dimethyl(3‐sulfopropyl)ammonium hydroxide], P(MAPDSA), and poly[3‐(methacryloylamino)propyl]dimethyl(3‐sulfopropyl)ammonium hydroxide‐co‐acrylic acid], P(MAPDSA‐co‐AA), were synthesized by radical polymerization. The resins were completely insoluble in water. Due to the lower metal ion retention of P(MAPDSA), the metal ions investigated under competitive and noncompetitive conditions for Cu(II), Cd(II), Hg(II), Zn(II), Pb(II), and Cr(III) ions by batch and column equilibrium procedures were carried out only for P(MAPDA‐co‐AA), particularly for Hg(II). The resin–Hg(II) ion equilibrium was achieved before 15 min. The resin showed a maximum retention capacity value for Hg(II) at pH 2 of 1.89 meq/g. The resin showed a high selectivity to Hg(II) ions. The recovery of the resin was investigated at 25°C with different concentrations of HNO₃ and HClO₄. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 525–530, 2005     

Metal‐ion‐retention properties of the poly(2‐acrylamido‐2‐methyl‐1‐propanosulfonic acid‐co‐4‐vinyl pyridine) resin

The water‐insoluble resin poly(2‐acrylamido‐2‐methyl‐1‐propanosulfonic acid‐co‐4‐vinyl pyridine), through a radical polymerization solution, was synthesized with ammonium persulfate as an initiator and N,N‐methylene bisacrylamide as a crosslinking reagent. The metal‐ion‐retention properties were studied by batch and column equilibrium procedures for the following metal ions: Hg(II), Cu(II), Cd(II), Zn(II), Pb(II), and Cr(III). These properties were investigated under competitive and noncompetitive conditions. The effects of the pH, maximum retention capacity, and regeneration capacity were studied. The resin showed a high retention ability for Hg(II) ions at pH 2.0. The retention of Hg(II) ions from a mixture of ions was greater than 90%. The resin showed a high selectivity for Hg(II) with respect to other metal ions. The Hg(II)‐loaded resin was able to be recovered with 4M HClO₄. The retention capacity was kept after four cycles of adsorption and desorption. The retention properties for Hg(II) were very similar with the batch and column methods. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3556–3562, 2003     

Heavy metals adsorption on some iminodiacetate chelating resins as a function of the adsorption parameters

The adsorption properties of some novel chelating resins (CRs) bearing iminodiacetate groups for removal of heavy metal ions like: Cu(II), Co(II) and Ni(II) from aqueous solutions comparative with the commercial resin Amberlite IRC-748 have been studied in this work by a batch equilibrium technique. Quantitative analysis for adsorption was conducted using UV–vis spectroscopy to investigate the kinetics, adsorption isotherm and thermodynamics of the removal process considering equilibration time, pH, metal ion concentration and temperature as controlling parameters. The metal adsorption capacities, at pH 5, were in the order Cu(II) > Ni(II) > Co(II), for both the CR with 10 wt.% DVB (CR-10) and the commercial resin Amberlite IRC-748. The adsorption capacities on CR-10 were higher for Ni(II) and Co(II) ions, but lower for Cu(II) ions compared with Amberlite IRC-748. Both Freundlich and Langmuir isotherms well fitted on the adsorption results of Cu(II), Ni(II) and Co(II) ions on all iminodiacetate resins.     

Synthesis and application of ion‐imprinted resin based on modified melamine–thiourea for selective removal of Hg(II)

A novel Hg(II) ion‐imprinted resin based on thiourea‐modified melamine was manufactured for selective elimination of Hg²⁺ from aqueous solutions. The polymerizable thiourea–melamine ligand together with its Hg(II) complex were extensively investigated using elemental analysis, Fourier transform infrared (FTIR) and ¹H NMR spectroscopies. The Hg(II) complex was used in a condensation polymerization in the presence of formaldehyde crosslinker and then the Hg(II) ions were leached out from the crosslinked polymeric network to finally leave the ion‐imprinted Hg‐PMTF resin. Both ion‐imprinted Hg‐PMTF and non‐imprinted resins were examined utilizing scanning electron microscopy and FTIR spectroscopy. The potential of the prepared resin for selective separation of Hg(II) ions from aqueous solutions was then evaluated by performing a series of batch experiments. Hg‐PMTF displayed an obvious rapid removal of Hg(II) ions with a pseudo‐second‐order kinetic pattern. In addition, the Langmuir adsorption isotherm model exhibited the best fit with the experimental data with comparatively high maximum adsorption capacity (360.5 mg g^?1). © 2015 Society of Chemical Industry     

Chelating resins supporting dithiocarbamate and methylthiourea groups in adsorption of heavy metal ions

Two different sulfur atom containing functional groups were introduced into poly(styrene-g-ethylene glycols), PSR-ET (13) OH, consisting of a cross-linked polystyrene backbone grafted with linear poly(ethylene glycol) chains. Reaction of an amino derivative of the polymeric substrate with carbon disulfide and methylisothiocyanate produced new chelating resins of dithiocarbamate type, PSR-ET (13) CS₂Na, and methylthiourea type, PSR-ET (13) TU, respectively. The adsorption behavior of these resins was studied toward Hg(II), Cd(II), Cu(II), and Pb(II) ions in different experimental conditions. The order of metal adsorption for dithiocarbamate-supported resins was Hg(II) > Pb(II) ? Cd(II) > Cu(II) and for methylthiourea-supported resins was Hg(II) ? Cu(II) > Cd(II) ? Pb(II). Different regeneration methods were performed with the dithiocarbamate and methylthiourea resins; the former was regenerated by complete mineralization of the metal complexes, the latter by treatment with a solution of 6 N HCl and 10% of thiourea. © 1994 John Wiley & Sons, Inc.     

Investigation on selective adsorption of Hg(II) ions using 4‐vinyl pyridine grafted poly(ethylene terephthalate) fiber

In the work, poly(ethylene terephthalate) (PET) fibers were grafted with 4‐vinyl pyridine (4‐VP) monomer using benzoyl peroxide (Bz₂O₂) as initiator in aqueous media. The removal of Hg(II) ions from aqueous solution by the reactive fiber was examined by batch equilibration technique. Effects of various parameters such as pH, graft yield, adsorption time, initial ion concentration, and adsorption temperature on the adsorption amount of metal ions onto reactive fibers were investigated. The optimum pH of Hg(II) was found 3. The maximum adsorption capacity was found as 137.18 mg g^?1. Moreover such parameters as the adsorption kinetics, the adsorption isotherm, desorption time and the selectivity of the reactive fiber were studied. The adsorption kinetics is in better agreement with pseudo‐first order kinetics, and the adsorption data are good fit with Freundlich isotherms. The grafted fiber is more selective for Hg(II) ions in the mixed solution of Hg(II)‐Ni(II), Hg(II)‐Zn(II), and Hg(II)‐Ni(II)‐Zn(II) at pH 3. Adsorbed Hg(II) ions were easily desorbed by treating with 1M HNO₃ at room temperature. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis,characterization, and properties of a selective adsorbent to mercury(II) ions

A resin containing 3‐(dimethylamine)propyl acrylate and 4‐vinylpyridine was synthesized by radical polymerization (in 1:1 mole ratio). Ammonium persulfate (0.5 mol %) and N,N′‐methylene‐bis‐acrylamide (2 mol %) were used as initiator and crosslinking reagents, respectively. The resin was characterized by Fourier transform infrared (FTIR) and ultraviolet‐visible (UV‐Vis) spectroscopy. The ability to bind Hg(II), Cd(II), Zn(II), Pb(II), Cu(II), and Cr(III) as well as the maximum adsorption capacity and elution of Hg(II) ions from the loaded resin was studied. Sorption selectivity from ternary mixture Hg(II), Cd(II), and Zn(II) was studied at the optimum sorption pH value. At pH 2 the adsorbent retained 98% of Hg(II); the retention of the other metal ions was lower than 20%. The elution assay was made in HClO₄ solutions. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2559–2563, 2002     

The Removal of Hg (II) Ions from Laboratory Wastewater onto Phosphorylated Haloxylon ammodendron: Kinetic and Equilibrium Studies

Haloxylon ammodendron (HA), a desert plant residue, has been utilized as adsorbent material for the removal of Hg (II) ions from laboratory wastewater after treatment with phosphoric acid to form Haloxylon ammodendron cellulose phosphate (HACP). Three levels of HACP having different phosphorous content were prepared. The HACP samples were characterized by estimating the phosphorous content as well as FT-IR spectra. Using the batch experimental systems, the removal of Hg (II) on the HACP particles was investigated. The data of the adsorption isotherm was tested by the Langmuir, Freundlich and Temkin models. The removal processes of Hg (II) onto HACP particles could be well described by pseudo-second order model. The adsorption rate of mercury was affected by the initial heavy metal concentration, initial pH, adsorbent dose and agitation time and temperature as well as extent of modification. The adsorption experiments indicated that the HACP particles have great potential for the removal of Hg (II) from laboratory wastewater. The maximum adsorption capacity (Q_max) of the HACP towards Hg (II) ions was found to be 384.6 and 416.7 and 476.2 mg/g at 30, 40 and 50°C, respectively. Similarly, the Freundlich constant, n values were found to be 6.6, 4.4 and 3.8 at 30, 40 and 50°C, respectively. The thermodynamics constants of the adsorption process: ΔH°, ΔS° and ΔG° were evaluated.     

Heterogeneous synthesis of chelating resin organophosphonic acid‐functionalized silica gel and its adsorption property of heavy metal ions from fuel ethanol solutions

In this study, chelating resin silica gel chemically modified by poly(triethylenetetramine bis(methylenephosphonic acid)) (denoted as SG‐Cl‐T‐P) was successfully developed by heterogeneous synthesis method and used for adsorptive removal of heavy metal ions from fuel ethanol solutions, and the relevant modified organic group was calculated by DFT method at the B3LYP/6‐31 + G(d) level. SG‐Cl‐T‐P was characterized by Fourier transform infrared spectrometer, scanning electron microscope, energy dispersive X‐ray analysis system, porous analysis, etc. SG‐Cl‐T‐P has been used to investigate the adsorption of Hg(II),Cu(II), Mn(II), Co(II), Zn(II), Ni(II), Fe(III), and Cd(II) metal ions from ethanol solutions. The research results revealed that it has the better adsorption capacity for Hg(II) and Cd(II). © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

CHARACTERIZATION AND EVALUATION OF LEVEXTREL EXTRACTION CHROMATOGRAPHIC RESINS FOR TRACE METAL SEPARATION SCHEMES IN AUTOMATIC WATER QUALITY CONTROL SYSTEMS.

ABSTRACT

This paper presents the results of the selective removal of Zn(II) from Cu(II), Cd(II), Ni(II) and Pb(II) using ‘Extraction Chromatographic Resins’ Lewatit TP80T84, which contains dK2,4,4-trimethylpentyl)pbosphinic acid as active component. The extraction and selectivity patterns of the resin were obtained from the metal distribution coefficients as a fiinction of pH. Experimental data of Pb(II), Ni(II) and other natural water occurring metal ions, such as Ca(II), were analyzed graphically and numerically in order to describe the metal extraction reactions. Analysis of the results showed that the extraction of these metal ions can be explained assuming the formation of metal complexes in the resin phase with a general composition ML2(_{q 3}HL)q, where q takes different values depending on the metal studied. Finally the efficiency of the resin in the selective removal of Zn(II) from the toxic heavy metal group Cu(T±), Cd(II), Ni(II) and Pb(II) were evaluated.of divalent metal ions (Zn(II), Cu(II), Cd(n), Ni(II), Pb(n)). Concerning the extraction selectivity of Lewatit TP80784 resins versus Zn(II), Cu(II)( Cd(n), Ca(n), Pb(n) and Ni(II), no differences have been found in comparison with the selectivity of this extractant in organic solvents (36). The results of the numerical treatment indicate that the extraction of Pb(n) and Ni(II) can be explained by assuming the formation of PbL₂(HL₂ and NiL₂(HL)₂. However, the extraction of Ca(II) can be explained assuming the formation of two species CaL₂ and Ca(NO₃)L|The analysis of the separation factors indicates that Lewatit TP80784 allows a quantitative separation of Zn(II) from Cd(II), Ni(II) and Pb(II) with ApHso greater that 2 and quasi-quantitative separations (90-95%) from Cu(II)|The results obtained in the extraction of Zn(IT), Cu(H), Cd(II), Ni(II), and Pb(n) from water samples in column experiments are very satisfactory, and the sytem will be used on-line in a multicomponent spectrophotometric method for the monitoring of low levels of toxic metal ions in surface waters.     

Metal ion sorption properties of water-insoluble resins based on sodium styrene sulfonate and different comonomers

A set of water-insoluble resins based on sodium styrene sulfonate and different comonomers were synthesized. The resins poly(mono-2-(methacryloyloxy)ethyl succinate-co-sodium 4-styrene sulfonate) P(MOES-co-SSNa), poly(2-acrylamido glycolic acid-co-sodium 4-styrene sulfonate) P(AGA-co-SSNa), poly(acrylamide-co-sodium 4-styrene sulfonate) P(AAm-co-SSNa), and poly(2-(dimethylamine)ethyl acrylate-co-sodium 4-styrene sulfonate) P(DMAEA-co-SSNa) were synthesized by solution radical polymerization. The metal ion retention properties were studied by batch procedure for Cd(II), Zn(II), Pb(II), and Hg(II). Resins performance was compared with a poly(sodium 4-styrene sulfonate) (PSSNa) resin in order to evaluate the effect of comonomer on sorption properties. The effect of pH, time, temperature, and maximum retention capacity were studied. In addition, sorption experiments were carried out under competitive ion conditions to study the selectivity of resins. The resins P(AAm-co-SSNa) and P(AGA-co-SSNa), showed the most important differences compared with PSSNa resin, the former present higher sorption and the latter presented selectivity for Hg(II) at pH 2.     

Kinetics and Equilibrium Studies for the Removal of Cobalt,Manganese, and Silver in Ethanol using Dowex 50W-x8 Cation Exchange Resin

Organic solvents such as ethanol, find a wide range of applications in fuel, pharmaceutical industries, food industries, and paint formulations, among others. The removal of Ag(I), Co(II), and Mn(II) ions in ethanol by cation exchange resin, Dowex 50W-x8, was investigated. The adsorption characteristics of metal ions onto Dowex 50W-x8 resin were described by Langmuir isotherms. The maximum sorption exchange capacities at 298 K were obtained as 47.4 mg g^?1, 52.6 mg g^?1, and 58.5 mg g^?1 for Ag(I), Co(II), and Mn(II), respectively. The data was also fitted to Temkin and Dubinin-Radushkevich adsorption isotherm models to evaluate other adsorption properties. The ion exchange of silver, cobalt, and manganese on cation exchange resin followed pseudo-second-order kinetics, and the intraparticle diffusion was rate-determining step. The thermodynamic parameters indicated that the sorption of metal ions onto Dowex 50W-x8 resin was spontaneous (negative ΔG°) and endothermic in nature (positive ΔH°) implying that the adsorption capacity increased with increasing temperature. The resin can be regenerated by eluting metal ions with 3.0 mol L^?1 HNO₃ followed by washing it with 10 mL of Millipore water and 10 mL of 2.0 M NaOH, respectively. The proposed method was applied for metal ion removal in real ethanol samples.     

Modification of Malonamide Ion-Exchange/Chelating Resins Using the Fields–Kabatschnik Reaction and Their Application to Metal Ion Removal from Aqueous Solutions

A resin containing 2-aminoethyl-substituted amides of malonic acid was modified in the Fields–Kabatschnik reaction using diethyl phosphite. The resultant ion-exchange/chelating resins have aminomethylphosphonate groups. Modification proceeds almost quantitatively, giving a resin with P=1.97 mmol/g, N=4.20 mmol/g, and water regain of 0.44 g/g. It can be selectively hydrolyzed by treatment with trimethylchlorosilane/potassium bromide in dry acetonitrile. Both acidic and ester forms of the resin were used in the removal of Cu(II), Cd(II), Ni(II), and Zn(II) from their diluted 1×10^–4 N solutions in 0.2 M acetate buffer at pH 3.7 and 5.6. The affinity of the resin in an acid form toward divalent metal cations is high, and at pH 5.6 the log K _d is 7.54, 3.97, 3.41, and 3.98, respectively. The resins are selective and the presence of an excess of sodium ions does not influence the uptake of metal ions. The type of complexes formed between the resins and Cu(II) ions was studied using EPR spectroscopy. The ester form of the resin was used in the removal of tetrachloroaurate anions from hydrochloric acid solution. It has been found that the log K _d is in the range of 3.14–3.94 for the uptake of AuCl^– ₄ from 5.0–0.5 M HCl solutions.     

Synthesis and adsorption properties of magnetic resin microbeads with amine and mercaptan as chelating groups

Three magnetic chelating resins containing amino and mercapto groups were prepared by the suspended condensation polymerization of 2‐chloroethoxymethyl thiirane with diamines. The magnetic resins were microbeads whose diameter was in the range of 10 to 45 μm. The structure of the resins was characterized by XPS, IR, and elemental analysis. Their adsorption properties for Hg(II), Au(III), Pd(II), Pt(IV), Ag(I), Cu(II), Zn(II), and Pb(II) were investigated. The experimental results show the magnetic resins have high affinity for Hg(II) and noble metal ions. In the competitive adsorption, the resins predominantly adsorbed Hg(II) or Pd(II) in the coexistence of Cu(II), Zn(II), and Mg(II). Desorption of Pd(II) loaded on the resins was studied by using 2M hydrochloric acid solution containing 1% thiourea as desorbent. A high desorption ratio (up to 96.5%) was observed, and repeated adsorption/desorption operations showed the probability of repeated use of the magnetic resins. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1587–1592, 2001     

Network crown ether resin with pendent sulfur ether group: Preparation,thermodegradation, and adsorption behavior

Network crown ether resin with the pendent sulfur ether group was prepared by ring‐opening copolymerization of 3‐thiopentyl glycidyl ether and diethylene glycol bisglycidyl ether with Na, NaOCH₂CH₂OCH₂CH₂OH, or BuLi as catalyst, respectively. The yield of network polymer and the conversion of functional monoepoxy monomer are varied from catalyst to catalyst, and the thermostability of the resin is related to the content of the sulfur ether group. The resins show high adsorption capacity toward Cu(II), Pb(II), especially, Hg(II) ions, but poor adsorption capacity toward Mg(II) ions. Corresponding thermodynamic parameter of Hg(II) ion was deduced, and could be expressed approximately with the Freundlich equation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1445–1451, 2003     

Adsorption of Cr(III), Ni(II), Zn(II), Co(II) ions onto phenolated wood resin

In this study, phenolated wood resin was used an adsorbent for the removal of Cr(III), Ni(II), Zn(II), Co(II) ions by adsorption from aqueous solution. The adsorption of metal ions from solution was carried at different contact times, concentrations and pHs at room temperature (25°C). For individual metal ion, the amount of metal ions adsorbed per unit weight of phenolated wood resin at equilibrium time increased with increasing concentration and pH. Also, when the amounts of metal ions adsorbed are compared to each other, it was seen that this increase was order of Cr(III) > Ni(II) > Zn(II) > Co(II). This increase was order of Cr(III) > Ni(II) > Co(II) > Zn(II) for commercial phenol–formaldehyde resin. Kinetic studies showed that the adsorption process obeyed the intraparticle diffusion model. It was also determined that adsorption isotherm followed Langmuir and Freundlich models. Adsorption isotherm obtained for commercial phenol–formaldehyde resin was consistent with Freundlich model well. Adsorption capacities from Langmuir isotherm for commercial phenol–formaldehyde resin were higher than those of phenolated wood resin, in the case of individual metal ions. Original adsorption isotherm demonstrated the monolayer coverage of the surface of phenolated wood resin. Adsorption kinetic followed the intraparticle diffusion model. The positive values of ΔG° determined using the equilibrium constants showed that the adsorption was not of spontaneous nature. It was seen that values of distribution coefficient (K_D) decreasing with metal ion concentration in solution at equilibrium (C_e) indicated that the occupation of active surface sites of adsorbent increased with metal ions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2838–2846, 2006     

EVALUATION OF A DIETHANOLAMINE CHELATING RESIN USING TWO-PHASE POTENTIOMETRY

ABSTRACT

The synthesis of a polystyrene resin functionalised with diethanolamine is described. Protonation of the resin and complexation of Pb(II), Cd(II), Hg(II), UO₂ ²⁺, Fe(III), Ca(n) and Nd(III) were studied using two-phase potentiometry. From these experiments, apparent formation constants could be calculated and distribution curves obtained. Predictions as to metal ion separations were then possible. Batch experiments with Eu(III) and Pu(IV) were also performed as well as a column experiment for Pb(II) and Ca(II) to test selectivity. The resin shows selectivity towards metal ions that are large and/or have a good affinity for nitrogen donor ligands. Metal ions susceptible to hydrolysis are well complexed by the resin due to its ability to suppress hydrolysis.