Removal of Orange II by Phosphonium-modified Algerian Bentonites

An Algerian montmorillonite was modified with two organic surfactants, methyltriphenyl phosphonium bromide and n-hexyltriphenyl phosphonium bromide. The solids obtained were used as adsorbents to remove Orange II, an anionic dye from aqueous solutions. Batch experiments were conducted to study the effects of temperature (20–60°C), initial concentration of adsorbate (50–150 mg L^?1) and pH of solution 6.5 on dye adsorption. Due to their organophilic nature, exchanged montmorillonites were able to adsorb Orange II at a very high level. Adsorption of Orange II for B-NHTPB and B-MTPB at different pH show that the adsorption capacity clearly decreases with an increase in pH of the initial solution from 2 to 8, this decrease being dramatic for pH > 8. This may be due to hydrophobic interactions of the organic dye with both phosphonium molecules and the remaining non-covered portion of siloxane surface. The kinetics of the adsorption was discussed on the basis of three kinetic models, i.e., the pseudo-first-order, the pseudo-second-order, and the intraparticle diffusion models. Equilibrium is reached after 30 min and 60 min for B-MTPB and B-NHTPB, respectively; the pseudo-second-order kinetic model described very well the adsorption of Orange II on modified bentonites. The non-linear Langmuir model provided the best correlation of experimental data, maximum adsorption of Orange II is 53.78 mg g^?1 for B-NHTPB and 33.79 mg g^?1 for B-MTPB. The thermodynamic parameters, such as free energy of adsorption (ΔG°), enthalpy change (ΔH°), and entropy change (ΔS°) were also determined and evaluated. From thermodynamic studies, it was deduced that the adsorption was spontaneous and exothermic.     

Removal of Boron from Aqueous Solutions by Adsorption Using Fly Ash,Zeolite, and Demineralized Lignite

In the present study for the purpose of removal of boron from water by adsorption using adsorbents like fly ash, natural zeolite, and demineralized lignite was investigated. Boron in water was removed with fly ash, zeolite, and demineralized lignite with different capacities. Ninety-four percent boron was removed using fly ash. Batch experiments were conducted to test the removal capacity, to obtain adsorption isotherms, thermodynamic and kinetic parameters. Boron removal by all adsorbents was affected by pH of solution; maximum adsorption was achieved at pH 10. Adsorption of boron on fly ash was investigated by the Langmuir, Freundlich, and the Dubinin-Radushkevich models. Standard entropy and enthalpy changes of adsorption of boron on fly ash were, ΔS ⁰  = ?0.69 kJ/mol K and ΔH ⁰  = ?215.34 kJ/mol, respectively. The negative value of ΔS ⁰ indicated decreased randomness at the solid/solution interface during the adsorption boron on the fly ash sample. Negative values of ΔH ⁰ showed the exothermic nature of the process. The negative values of ΔG ⁰ implied that the adsorption of boron on fly ash samples was spontaneous. Adsorption of boron on fly ash occurred with a pseudo-second order kinetic model, and intraparticle diffusion of boron species had also some effect in adsorption kinetics.     

EFFECT OF TEMPERATURE ON THE ADSORPTION OF METHYLENE BLUE DYE ONTO SULFURIC ACID–TREATED ORANGE PEEL

The present study explains the preparation and application of sulfuric acid–treated orange peel (STOP) as a new low-cost adsorbent in the removal of methylene blue (MB) dye from its aqueous solution. The effects of temperature on the operating parameters such as solution pH, adsorbent dose, initial MB dye concentration, and contact time were investigated for the removal of MB dye using STOP. The maximum adsorption of MB dye onto STOP took place in the following experimental conditions: pH of 8.0, adsorbent dose of 0.4 g, contact time of 45 min, and temperature of 30°C. The adsorption equilibrium data were tested by applying both the Langmuir and Freundlich isotherm models. It is observed that the Freundlich isotherm model fitted better than the Langmuir isotherm model, indicating multilayer adsorption, at all studied temperatures. The adsorption kinetic results showed that the pseudo-second-order model was more suitable to explain the adsorption of MB dye onto STOP. The adsorption mechanism results showed that the adsorption process was controlled by both the internal and external diffusion of MB dye molecules. The values of free energy change (ΔG ^o) and enthalpy change (ΔH ^o) indicated the spontaneous, feasible, and exothermic nature of the adsorption process. The maximum monolayer adsorption capacity of STOP was also compared with other low-cost adsorbents, and it was found that STOP was a better adsorbent for MB dye removal.     

ADSORPTION OF A LEATHER DYE ON MESOPOROUS STRUVITE OBTAINED FROM SWINE WASTEWATER

Struvite powder obtained from swine wastewater was used as adsorbent to remove an azo leather dye from aqueous solution. The material was characterized by X-ray diffraction, surface area, and atomic force microscopy. The sample presented a single phase having a mesoporous structure and surface area of 35.63 m² g^?1. Langmuir and Freundlich isotherm models were fitted to the adsorption data and both satisfactorily represented the process. The maximum adsorption capacity was 38.14 mg g^?1. From the analysis of thermodynamic parameters such as free energy of adsorption (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) it was verified that the adsorption process is very fast, spontaneous, and exothermic in nature, with weak forces acting.     

Biosorption of lac dye by the red marine alga Gracilaria tenuistipitata: biosorption kinetics,isotherms, and thermodynamic parameters

The hypothesis that the dried, ground biomass of the red marine alga Gracilaria tenuistipitata could be used for the efficient removal of lac dye from aqueous solution was assessed in this work. The effects of parameters such as initial pH, biosorbent dosage, contact time, initial dye concentration, and temperature on the biosorption capacity of the dye were investigated. Equilibrium data were analysed using Langmuir, Freundlich, and Temkin isotherm models, and the Freundlich model provided the highest coefficient of determination values. Biosorption kinetic data were successfully described with a pseudo‐second‐order model at initial dye concentrations of 50, 80, 100, and 120 mg l^?1. The thermodynamic parameters of biosorption – enthalpy change (?H° = ?30.64 kJ mol^?1), free energy change (?G° = 4.32 kJ mol^?1 at 303 K to 7.78 kJ mol^?1 at 333 K), and entropy change (?S° = ?115.38 J mol^?1 K^?1) – were determined. The negative value of the enthalpy change and positive values of the free energy change indicate that the biosorption process is exothermic and non‐spontaneous. The negative value of the entropy change is consistent with decreased randomness at the solid–liquid interface with dye biosorption. Attenuated total reflectance–Fourier transform infrared spectroscopic analysis confirmed the presence of lac dye on the G. tenuistipitata material. The efficiency of lac dye removal by this biomass material at 20 g l^?1 and with an initial dye concentration of 50 mg l^?1 in acidic solution was 71%, which indicated its potential usefulness as a new dye biosorbent.     

Effect of Temperature on Kinetics and Adsorption Profile of Endothermic Chemisorption Process: –Tm(III)–PAN Loaded PUF System

Abstract

The sorption behavior of 3.18×10^?6 mol l^?1 solution of Tm(III) metal ions onto 7.25 mg l^?1 of 1‐(2‐pyridylazo)‐2‐naphthol (PAN) loaded polyurethane foam (PUF) has been investigated at different temperatures i.e. 303 K, 313 K, and 323 K. The maximum equilibration time of sorption was 30 minutes from pH 7.5 buffer solution at all temperatures. The various rate parameters of adsorption process have been investigated. The diffusional activation energy (ΔE_ads) and activation entropy (ΔS_ads) of the system were found to be 22.1±2.6 kJ mol^?1 and 52.7±6.2 J mol^?1 K^?1, respectively. The thermodynamic parameters such as enthalpy (ΔH), entropy (ΔS), and Gibbs free energy (ΔG) were calculated and interpreted. The positive value of ΔH and negative value of ΔG indicate that sorption is endothermic and spontaneous in nature, respectively. The adsorption isotherms such as Freundlich, Langmuir, and Dubinin–Radushkevich isotherm were tested experimentally at different temperatures. The changes in adsorption isotherm constants were discussed. The binding energy constant (b) of Langmuir isotherm increases with temperature. The differential heat of adsorption (ΔH_diff), entropy of adsorption (ΔS_diff) and adsorption free energy (ΔG_ads) at 313 K were determined and found to be 38±2 kJ mol^?1, 249±3 J mol^?1 K^?1 and –40.1±1.1 kJ mol^?1, respectively. The stability of sorbed complex and mechanism involved in adsorption process has been discussed using different thermodynamic parameters and sorption free energy.     

Methylene Blue Adsorption on Natural and Modified Clays

Toxic methylene blue dye is removed from water by accumulating it on the surface of clay minerals. Clay adsorbents are obtained from kaolinite, montmorillonite, and their acid activated forms. The adsorption experiments are carried out in a batch process in environments of different pH, initial dye concentration, amount of clay, interaction time, and temperature. Adsorption of dye is best described by second order kinetics. In the temperature range of 303 to 333 K, the Langmuir monolayer capacity for three kaolinite species increased from 45.5 to 56.5 mg g^?1, 45.9 to 57.8 mg g^?1, 46.3 to 58.8 mg g^?1, and for three montmorillonites species from 163.9 to 181.8 mg g^?1, 166.7 to 188.8 mg g^?1, and 172.4 to 192.3 mg g^?1. The interaction is an endothermic process driven by entropy increase and spontaneous adsorptive accumulation is ensured by favorable Gibbs energy decrease. It is found that acid activation enhances the adsorption capacity of kaolinite and montmorillonite.     

Sorptive removal of methylene blue from aqueous solutions by polymer/activated charcoal composites

In this study, a new sorbent, a poly(acrylamide‐co‐itaconic acid) [P(AAm‐co‐IA)]/activated charcoal (AC) composite, was prepared by the aqueous polymerization of acrylamide and itaconic acid in the presence of AC with N,N′‐methylene bisacrylamide as a crosslinker and potassium persulfate as an initiator. The P(AAm‐co‐IA)/AC composite sorbent showed a fair capacity to adsorb the cationic dye methylene blue. The maximum sorption capacity, as studied at 23, 37, and 50°C and determined with the Langmuir isotherm model, was found to be 909.0, 312.5, and 192.3 mg/g, respectively. For an initial concentration of 5 mg/L, the kinetic uptake data were studied with various kinetic models. The pseudo‐second‐order equation was found to fairly fit the uptake data with a regression value of 0.999. The dye uptake increased with the pH of the sorbate solution, and the optimum pH was found to be in the range of 7–10. Intraparticle diffusion was also observed to take place, and the coefficient of intraparticle diffusion was evaluated to be 26.51 × 10^?2 mg g^?1 min^?1/2. The various thermodynamic parameters were also determined to predict the nature of the uptake process. The sorption process was found to be spontaneous, as indicated by a negative standard free energy change. The negative standard enthalpy change suggested an exothermic nature for the uptake. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Removal of Rhodamine B Dye Using Activated Carbon Prepared from Palm Kernel Shell and Coated with Iron Oxide Nanoparticles

The efficacy of activated carbon prepared from Palm Kernel Shell (PKSAC) from agriculture biomass and coated with magnetic nanoparticle (Fe₃O₄) in the removal of Rhodamine B dye was investigated. Adsorption experiments were carried out at various initial pH, adsorbent dosage, initial dye concentration, particle size, and temperature. Kinetic analyses were conducted using pseudo first order, pseudo second order and intra particle diffusion models. However, the regression results showed that the adsorption kinetics was represented more accurately by the pseudo second order model. The pseudo second order kinetic constant obtained was 1.7 × 10^?4 min^?1 at 323 K when 200 mg L^?1 dye concentration was used. The equilibrium data were well described by both Langmuir and Freundlich isotherm models. The Langmuir adsorption capacity was 625 mgg^?1. The rate of adsorption improved with increasing temperature and the process was endothermic with ΔH value assessed at 80 kJmol^?1. Results obtained reveal that activated carbon prepared from Palm Kernel Shell coated with magnetic nanoparticle from agriculture biomass can be an attractive option for dye removal from industrial effluent.     

Application of Full Factorial Design for Removal of Polycyclic Aromatic Dye from Aqueous Solution Using 4A Zeolite: Adsorption Isotherms,Thermodynamic and Kinetic Studies

In this study, removal of the cationic dye acridine orange (AO) from aqueous solution using 4A zeolite was studied. The adsorption experiments were performed using batch system, and full factorial design was employed for investigating the condition of removal efficiency of dye. The four most important operating variables were the initial pH of the solution, the concentration of dye, the contact time, and the temperature. The 18 experiments were required to investigate the effect of variables on removal of the dye. The results were statistically analyzed to define important experimental variables and their levels using the analysis of variance (ANOVA). A regression model that considers the significant main and interaction effects was suggested and fitted the experimental data very well. Model predictions were found to be in good agreement (R² = 99.99%, adjusted R² = 99.86%) with experimental data. The optimized conditions for dye removal were at initial pH 3.0, 20.0 mg L^?1 dye, temperature 298.0 K and 80.0 min adsorption time. The experimental data were analyzed by the Langmuir, Freundlich, Temkin and Sips adsorption models. The maximum predicted adsorption capacities for AO was obtained as 29.851 mg g^?1. The adsorption thermodynamic parameters, namely ΔH°_ads, ΔG°_ads and ΔS°_ads, were determined. Furthermore, the kinetic of AO adsorption on the 4A zeolite was analyzed using pseudo-first- and second-order kinetic models and the results showed that the removal was mainly a pseudo-second-order process.     

Adsorption of Furfural from Aqueous Solution onto Activated Carbon: Kinetic,Equilibrium and Thermodynamic Study

Abstract

The present study aims to evaluate the influence of various experimental parameters viz. initial pH (pH ₀), adsorbent dose, contact time, initial concentration and temperature on the adsorptive removal of furfural from aqueous solution by commercial grade activated carbon (ACC). Optimum conditions for furfural removal were found to be pH ₀ ≈ 5.9, adsorbent dose ≈ 10 g/l of solution and equilibrium time ≈ 6.0 h. The adsorption followed pseudo‐second‐order kinetics. The effective diffusion coefficient of furfural was of the order of 10^?13 m²/s. Furfural adsorption onto ACC was found to be best represented by the Redlich‐Peterson isotherm. A decrease in the temperature of the operation favorably influenced the adsorption of furfural onto ACC. The positive values of the change in entropy (ΔS ⁰); and the negatived value of heat of adsorption (ΔH ⁰) and change in Gibbs free energy (ΔG ⁰) indicated feasible, exothermic, and spontaneous nature of furfural adsorption onto ACC.     

Adsorption of Anionic and Cationic Dyes from Aqueous Solution on Non-Calcined Mg-Al Layered Double Hydroxide: Experimental and Theoretical Study

Non-calcined Mg-Al layered double hydroxide (LDH) with Mg/Al molar ratio of 3:1 was synthesized using the co-precipitation method. Sorption of anionic (acid blue 25 - AB25, reactive blue 4 - RB4), and cationic (methylene blue - MB) dyes by Mg-Al LDH form aqueous solution was investigated. The effect of solution pH, initial concentration, and contact time were investigated by batch adsorption experiments. The adsorbed amount increases with decrease in pH solution for AB25 and RB4. The cationic dye (MB) solution was insensitive to pH variation and also exhibited a low performance in the kinetic equilibrium studies. While anionic dyes were almost completely extracted from the solution, 90% of the methylene blue remained in solution. The equilibrium data were well described using the Langmuir-Freundlich model for RB4, AB25, and MB dyes with maximum adsorption capacity of 328.90, 246.10, and 43.48 mg/g, respectively. Finally, the mechanism of adsorption involving the dyes and LDH was evaluated using the Monte Carlo approach in the NVT ensemble. The results suggest that molecular simulation can be used to preview quantitatively the dye uptake. Supplemental materials are available for this article. Go to the publisher's online edition of Separation Science & Technology to view the supplemental file.     

Kinetic and Equilibrium Studies on the Adsorption of Crystal Violet Dye using Kaolin as an Adsorbent

Abstract

Experimental investigations are carried out to adsorb toxic crystal violet dye from aqueous medium using kaolin as an adsorbent. Characterization of kaolin is done by measuring

1. particle size distribution using particle size analyzer,

2. BET surface area using BET surface analyzer,

3. structural analysis using X ray diffractometer, and

4. microscopic analysis using scanning electron microscope.

The effects of initial dye concentration, contact time, kaolin dose, stirring speed, pH, and temperature are studied for the adsorption of crystal violet in batch mode. Adsorption experiments indicate that the extent of adsorption is strongly dependent on the pH of the solution. Free energy of adsorption (ΔG ^o ), enthalpy (ΔH ^o ), and entropy (ΔS ^o ) changes are calculated to know the nature of adsorption. The calculated values of ΔG ^o are ?4.11 and ?4.48 kJ/mol at 295 K and 323 K, respectively, for 20 mg/L of dye concentration, which indicates that the adsorption process is spontaneous. The estimated values of ΔH ^o and ΔS ^o show the negative and positive sign, respectively, which indicate that the adsorption process is exothermic and the dye molecules are organized on the kaolin surface in more random fashion than in solution. The adsorption kinetic has been described by pseudo first order, pseudo second order and intra‐particle diffusion models. It is observed that the rate of dye adsorption follows pseudo second order model for the dye concentration range studied in the present case. Standard adsorption isotherms are used to fit the experimental equilibrium data. It is found that the adsorption of crystal violet on kaolin follows the Langmuir adsorption isotherm.     

Coconut (Cocos nucifera) Shell Based Activated Carbon for the Removal of Malachite Green Dye from Aqueous Solutions

The adsorption of malachite green (MG) dye using coconut shell based activated carbon (CSAC) was investigated. Operational factors such as the effect of pH, initial dye concentration, adsorbent dosage, contact time, and solution temperature on the adsorption process were studied. Solution pH strongly affected the chemistry of both the dye molecule and CSAC in solution. Optimum dye removal was obtained at pH ≥ 8.0. Equilibrium was reached in 120 minutes contact time. The Langmuir, Freundlich, and Dubinin–Radushkevich (D-R) isotherm models were used to evaluate the adsorption data. The adsorption data fitted the Langmuir model most with maximum adsorption monolayer coverage of 214.63 mg/g. Pseudo-first-order, pseudo second-order, and intraparticle diffusion models were also used to fit the experimental data. Kinetic parameters, rate constants, equilibrium sorption capacities, and related correlation coefficients, for each model were calculated and discussed. Thermodynamic parameters such as ΔG⁰, ΔH⁰, and ΔS⁰ were evaluated and it was found that the sorption process was feasible, spontaneous, and exothermic in nature. The mean free energy obtained from D-R isotherm suggests that the adsorption process follows physiosorption mechanism. The results showed that coconut shells could be employed as a low-cost precursor in activated carbon preparation for the removal of MG dye from wastewaters.     

Removal of Copper(II) and Zinc(II) from Aqueous Solutions Using a Lignocellulosic-Based Polymeric Adsorbent Containing Amidoxime Chelating Functional Groups

In this study, the adsorption of Cu(II) and Zn(II) ions from aqueous solutions onto amidoximated polymerized banana stem (APBS) has been investigated. Infrared spectroscopy was used to confirm graft copolymer formation and amidoxime functionalization. The different variables affecting the sorption capacity such as pH of the solution, adsorption time, initial metal ion concentration, and temperature have been investigated. The optimum pH for maximum adsorption was 10.5 (99.99%) for Zn²⁺ and 6.0 (99.0%) for Cu²⁺ at an initial concentration of 10 mg L^?1. Equilibrium was achieved approximately within 3 h. The experimental kinetic data were analyzed using pseudo-first-order and pseudo-second-order kinetic models and are well fitted with pseudo- second-order kinetics. The thermodynamic activation parameters such as ΔG^o, ΔH^o, and ΔS^o were determined to predict the nature of adsorption. The temperature dependence indicates an exothermic process. The experimental isotherm data were well fitted to the Langmuir model with maximum adsorption capacities of 42.32 and 85.89 mg g^?1 for Cu(II) and Zn(II), respectively, at 20°C. The adsorption efficiency was tested using industrial effluents. Repeated adsorption/regeneration cycles show the feasibility of the APBS for the removal of Cu(II) and Zn(II) ions from water and industrial effluents.     

Study on adsorption performance of 2-amino-4-methylbenzothiazole onto chemical modification adsorption resins

A series of functional hyper-cross-linked resins were successfully synthesized by incorporating anhydride, sulfoacid and menthanone groups into post-cross-linked polymer. They were evaluated for adsorption of 2-amino-4-methylbenzothiazole (2A4MBT) from aqueous solution. The five resins were efficient for adsorption of 2A4MBT from aqueous solution. The adsorption process includes both physical adsorption and irreversible chemical adsorption. The absolute value of adsorption enthalpy had an order of PRLMR (3.24 kJ mol^?1) < IDLMR (7.96 kJ mol^?1) < TMAMR (9.72 kJ mol^?1) < PAMR (?13.1 kJ mol^?1) < SAMR (21.8 kJ mol^?1). Phthalic anhydride-modified resin could be regenerated by 10% HCl/methanol solution after adsorption equilibrium.     

Recycling of reactive dye using semi‐interpenetrating polymer network from sodium alginate and isopropyl acrylamide

A sequence of semi‐interpenetrating polymer network (semi‐IPN) were synthesized by free radical photo copolymerizing acrylic acid and isopropyl acrylamide (NIPAAm) in aqueous sodium alginate (NaAlg). Their structures (FT‐IR), thermal stability (TG/DTG), morphology (SEM), mechanical properties, reactive blue 4 (RB 4) dye adsorption (624 mg/g) and its dying characteristics, reusability of dye and adsorbent were evaluated. TG thermograms of semi‐IPN in air revealed zero order kinetics for initial step thermal degradation with an activation energy of 68.68 kJ/mol. Dye adsorption showed best fit for Langmuir adsorption isotherm and the kinetics followed pseudo‐second‐order model. The water and dye diffusion kinetics followed non‐Fickian mechanism. The changes in thermodynamic parameters namely Gibbs free energy (ΔG°), entropy (ΔS°) and enthalpy (ΔH°) indicated that the adsorption was spontaneous and exothermic process for RB 4/semi‐IPN system. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40968.     

Preparation and characterization of selective phenyl thiosemicarbazide modified Au(III) ion‐imprinted cellulosic cotton fibers

In this study, a novel selective Au(III) chelating surface ion imprinted fibers based on phenyl thiosemicarbazide modified natural cotton (Au‐C‐PTS) has been synthesized, and applied for selective removal of Au(III) from aqueous solutions. Batch adsorption experiments were performed with various parameters, such as contact time, pH, initial Au(III) concentration, and temperature. The kinetic studies revealed that the adsorption process could be described by pseudo‐second‐order kinetic model, while the adsorption data correlated well with the Langmuir and Freundlich models. The maximum adsorption capacities calculated from the Langmuir equation are 140 ± 1 mg g^?1 and 72 ± 1 mg g^?1 at pH 5 for both Au‐C‐PTS and NI‐C‐PTS, respectively. The estimated thermodynamic parameters (Gibbs free energy (ΔG°), enthalpy (ΔH°), and entropy change (ΔS°)) indicated the spontaneity and exothermic nature of the adsorption process. Furthermore, the selectivity study revealed that the ion imprinted fibers was highly selective to Au(III) compared with Cu(II), Cd(II), Hg(II), and Fe(III). The adsorbent was successfully regenerated with a 0.1M HNO₃ solution. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40769.     

p-Sulphonatocalix[8]arene functionalized silica resin for the enhanced removal of methylene blue from wastewater: equilibrium and kinetic study

ABSTRACT

The present investigation represents the synthesis of new p-sulphonatocalix[8]arene-based silica resin, p-SC8SR (5) and its application for the enhanced removal of methylene blue (MB) dye from contaminated water. The new p-SC8SR (5) resin was characterized by FT-IR, SEM, and EDX spectroscopy. The adsorption of MB on p-SC8SR (5) was investigated systematically by evaluating the effects of adsorbent dosage, initial pH, contact time, dye concentration, and ionic strength. Excellent adsorption (94%) of MB on p-SC8SR (5) was achieved at pH 9.5, contact time 10 min by using 0.2 mol L^?1 ionic strength and 2 × 10^?5 M initial MB dye concentration. Kinetic behavior of MB dye adsorption process on the newly synthesized p-SC8SR (5) adsorbent follows the pseudo-second-order rate model (R² = 0.998 and 0.999 for 2 × 10^?5 M and 1 × 10^?4 M, respectively). Adsorption isotherms were fitted well by the Freundlich model with excellent value of coefficient of determination (R²) = 0.995 which demonstrated that the adsorption of MB follows multilayer mechanism. Wastewater samples contaminated with MB were used to assess efficiency of the p-SC8SR (5) adsorbent. Results indicated that newly synthesized p-SC8SR (5) was found to be efficient adsorbent. During the removal process, the role of different functional groups’ cyclic structure was scrutinized and found that the ionic property as well as π–π interaction of host molecules played imperative role in the extent of adsorption.     

Equilibrium Isotherms,Thermodynamics, and Kinetic Studies for the Adsorption of Food Azo Dyes onto Chitosan Films

The adsorption of FD&C red 2 and FD&C yellow 5 onto chitosan films (CFs) was evaluated by equilibrium isotherms, thermodynamics, and kinetic studies. The effects of temperature (298–328 K), initial dye concentration (50–300 mg L^?1), stirring rate (50–350 rpm), and contact time (0–120 min) were investigated at pH of 2.0 and 100 mg L^?1 of CFs. The dye concentration was determined by spectrophotometry. Freundlich and Langmuir models were used to represent the equilibrium data. The Langmuir model was the more adequate to represent the equilibrium data (R² > 0.99 and average relative error <2.50%) and the maximum adsorption capacities were 494.13 and 480.00 mg g^?1 for FD&C red 2 and FD&C yellow 5, respectively, obtained at 298 K. The R_L values ranged from 0.044 to 0.145. The adsorption was exothermic, spontaneous, and favorable. For the FD&C red 2, 90% of saturation was attained at 120 min and the Elovich model was the more appropriate. For the FD&C yellow 5, 95% of saturation was attained at 20 min and the pseudo first-order model was the more adequate to fit the kinetic data. CFs were easily separated from the liquid phase after the adsorption process, providing benefits for industrial applications, and its application range can be extended for azo dyes.