相分离-溶胀法制备生物可降解PELA多孔纳米微球

采用相分离-溶剂去除法制备纳米尺度的单甲氧基聚乙二醇-聚乳酸共聚物(PELA)微球,分析了纳米微球在溶液中的形成机理;用有机溶剂对纳米微球进行溶胀制孔,制备出具有不同孔道特征的纳米微球. 结果表明,以乙醇+丙酮为油相、去离子水为水相,油相中PELA含量6.5 g/L、水相中SDS含量1%、油与水相体积比1:6、油相中乙醇含量50%(j)条件下,所制微球粒径为78.48 nm. 溶胀时间为0.5 h时,以甲苯为溶胀剂所制PELA微球具有中空单孔结构,以二氯甲烷为溶胀剂所制PELA微球具有多孔结构. 用相同方法制备了具有孔结构的聚乳酸、聚(乳酸-羟基乙酸)共聚物纳米微球,其与PELA的成孔趋势相同. 以模拟体液考察多孔PELA纳米微球的降解性能,30 d可充分降解.     

溶剂萃取与电泳技术的耦合——电泳萃取技术

本文对溶剂萃取与电泳技术耦合产生的新分离技术——电泳萃取技术的发展、研究现状进行了综述,并展望了该技术的应用和前景。     

运用手性固定相研究外消旋布洛芬的光学分离

Ibprofen is widely used as a non-steroidal anti-inflammatory drug and poduced as racemic mixture.Its pharmacological activity resides only is S-( )-enantiomer,and R-(-)-enantiomer is not only inactive but also has many side effects.Thus it is necessary to separate Renantiomer from racemic ibuprofen.We studied optical separation of racemic Ibuprofen with chiral high performance liquid chromatography(HPLC).,Out of three different chiral stationary phases,which were selected on the basis of structure and availability,two were found to be effective.There was optimum eluent composition for each stationary phase for good resolution in optical separation.Resolution decreased with increase of eluent flow rate,but effect of injection volume on resolution was insignificant at high eluent flow rate.     

关于均相溶剂萃取在分离分析应用中的讨论

提出了"均相溶剂萃取"的概念,比较了均相溶剂萃取与传统溶剂萃取的异同点,简要讨论均相溶剂萃取在分析化学中的部分应用.均相溶剂萃取法作为一种新的溶剂萃取分离法应当在分析化学教学中引起关注,以此拓展学生的知识面和培养学生的创新思维和创新意识.     

双溶剂液-液逆流分离模拟试验

研究了用离心萃取器进行双溶剂液 液逆流萃取工艺萃取分离β 甲基吡啶馏分的可行性模拟试验,并与小试进行了对比试验,得到较好试验结果。     

部分相容聚合物共混体系相分离的流变学表征方法

针对具有不同动态非对称性的部分相容聚合物共混体系,阐述了用于表征和探测其相分离特征的流变学方法,包括小振幅振荡剪切考察时温叠加原理的有效性和温度扫描,以及稳态剪切温度扫描;并且分析了共混体系的复杂结构对温度依赖性形成差异的深层原因,总结比较了各方法应用时的优缺点及其针对不同强弱动态非对称体系的适用性。     

Cloud‐point measurements for salt + poly(ethylene glycol) + water systems by viscometry and laser beam scattering methods

The phase separation of salt + poly(ethylene glycol) + water systems was studied by cloud‐point measurements using viscometry and laser beam scattering methods. The Flory–Huggins model was applied to determinate the condition for salt‐induced liquid–liquid phase separation in the system. A temperature‐ and concentration‐dependent interaction parameter was employed to fit the phase diagrams for the systems. The temperature and concentration functionality of the interaction parameter was determined and used to predict cloud‐point curves for the systems. The cloud‐point curves were found to be in quantitative agreement with experimental data. Also, the effect of various salts on the measured cloud points was studied. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1983–1990, 2003     

聚烯烃微孔膜相分离法成型技术

介绍了聚烯烃微孔膜相分离法成型加工原理、工艺过程、影响因素、性能参数及其应用。其影响因素包括聚合物相对分子质量、成核剂、化合物含量、冷却速率和拉伸条件等。聚合物相对分子质量高可提高薄膜的拉伸强度和化合物含量及孔隙率；成核剂可提高化合物的含量、拉伸成型性能、微晶数量，降低微晶大小，提高孔隙率；采用适宜的冷却速率和拉伸条件才能获得性能良好的微孔膜。     

Separation of Cadmium from Cobalt Electrolyte Solution by Solvent Extraction Method Using Modified D2EHPA

Cadmium from high tenor cobalt electrolyte solution was selectively removed using modified di-(2-ethylhexyl) phosphoric acid (D2EHPA). In this study, D2EHPA was converted to Co-D2EHPA after replacing its functional group with Co²⁺ ions. The process parameters, such as pH, organic concentration, O/A ratio, kinetics, etc., were investigated. A significant amount of cadmium was extracted using Co-D2EHPA at equilibrium pH ～ 3.5 and the McCabe-Thiele diagram showed that 100% cadmium can be extracted through three stages using O/A ratio of 1. Stripping tests revealed that 100% cadmium can be stripped from the loaded organic using 0.4 M H₂SO₄ in a single contact.     

综合相分离法制备聚酰胺6粒子的研究

首先采用滴加非溶剂法和冷却降温法分别制备了聚酰胺6（PA6粒子）,结果表明,前者制备的PA6粒子表面结构疏松,但粒子之间分散性好,而后者制备的PA6粒子表面结构致密,但粒子之间分散性差。然后将滴加非溶剂法和冷却降温法相结合,提出了综合相分离法,采用此方法制备的PA6粒子粒径分布较均匀,粒子与粒子之间分散性好,表面仍有孔洞但结构比较致密。     

溶剂油液相加氢脱芳新型大分子催化剂的研究

通过合成中孔分子筛、金属配合物、负载金属配合物,制得溶剂油液相加氢催化剂,并通过对催化剂的性能、反应参数、活性及稳定性进行评价,成功得到高活性溶剂油液相加氢催化剂,得出的液相加氢最佳反应条件为60 ℃、3.0 MPa.     

Solvent effect in phase separation for fabrication of micropatterned porous scaffold sheets

Cellular orientation control is important for tissue regeneration. Design of oriented structures for cells with suitable features can be used in tissue engineering. One of the methods of cellular orientation with the aim of regenerating which damaged tissues is utilizing oriented biocompatible substrates. This paper reports a one-step method with different solvents to fabricate porous micropatterned polyhydroxybutyrate scaffold sheets. The results indicated that the porosity and pore morphology of the scaffolds are viable with respect to proliferation rate, and a micropattern for cell alignment. Stem cells culturing proved that the scaffold sheets are suitable for cell culturing. Preliminary experiments indicate that the 2-D scaffold sheets are very promising as basis for building 3-D scaffolds.     

Simulations of Membrane Gas Separation: Chemical Solvent Absorption Hybrid Plants for Pre- and Post-Combustion Carbon Capture

Solvent absorption and membrane gas separation are two carbon capture technologies that show great potential for reducing emissions from stationary sources such as power plants. Here, plants combining chemical solvent absorption and membrane gas separation are considered for post-combustion capture as well as pre-combustion capture. In all ASPEN HYSYS simulations the membrane stage initially concentrates CO₂ into either the permeate or the retentate stream, which is then passed to a monoethanolamine (MEA) based solvent absorption process. In particular, post-combustion capture scenarios examined a membrane that is selective for CO₂ against N₂, while for the pre-combustion scenario a H₂-selective membrane was studied. It was found the energy demand of the combined hybrid plant was always more than that of a stand alone MEA solvent process. This was mainly due to the need to generate a pressure driving force upstream of the membrane in the post-combustion scenario or to recompress downstream gas streams in the pre-combustion scenarios. For both scenarios concentrating the CO₂ in the feed to the solvent system reduced the absorber column height and diameter, which could represent a CAPEX saving for the hybrid plant, dependent upon the membrane price. The use of a hydrogen selective membrane downstream of an oxygen fired gasifier was identified as the most prospective scenario, as it led to significant reductions in absorber size, for a relatively small membrane area and energy penalty.     

Biophysical Characterization of Adeno-Associated Virus Vectors Using Ion-Exchange Chromatography Coupled to Light Scattering Detectors

Ion-exchange chromatography coupled to light scattering detectors represents a fast and simple analytical method for the assessment of multiple critical quality attributes (CQA) in one single measurement. The determination of CQAs play a crucial role in Adeno-Associated Virus (AAV)-based gene therapies and their applications in humans. Today, several different analytical techniques, including size-exclusion chromatography (SEC), analytical ultracentrifugation (AUC), qPCR or ELISA, are commonly used to characterize the gene therapy product regarding capsid titer, packaging efficiency, vector genome integrity, aggregation content and other process-related impurities. However, no universal method for the simultaneous determination of multiple CQAs is currently available. Here, we present a novel robust ion-exchange chromatography method coupled to multi-angle light scattering detectors (IEC-MALS) for the comprehensive characterization of empty and filled AAVs concerning capsid titer, full-to-total ratio, absolute molar mass of the protein and nucleic acid, and the size and polydispersity without baseline-separation of both species prior to data analysis. We demonstrate that the developed IEC-MALS assay is applicable to different serotypes and can be used as an orthogonal method to other established analytical techniques.     

Real‐time temperature and photon transmission measurements for monitoring phase separation during the formation of poly(N‐isopropylacrylamide) gels

Phase separation during the formation of poly(N‐isopropylacrylamide) (PNIPA) hydrogels was investigated using real‐time photon transmission and temperature measurements. The hydrogels were prepared by free‐radical crosslinking polymerization of N‐isopropylacrylamide (NIPA) in the presence of N,N′‐methylenebisacrylamide (BAAm) as a crosslinker in an aqueous solution. The onset reaction temperature T₀ was varied between 20 and 28°C. Following an induction period, all the gelation experiments resulted in exothermic reaction profiles. A temperature increase of 6.5 ± 0.6°C was observed in the experiments. It was shown that the temperature increase during the formation and growth process of PNIPA gels is accompanied by a simultaneous decrease in the transmitted light intensities I_tr. The decrease in I_tr at temperatures below the lower critical solution temperature of PNIPA was explained by the concentration fluctuations due to the inhomogeneity in the gel network. At higher temperatures, it was shown that the gel system undergoes a phase transition via a spinodal decomposition process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3589–3595, 2002     

Experimental Study of a New Hydrocyclone for Multi-Density Particles Separation

Abstract

A new structure of hydrocyclone is designed to meet the demand of separating particles heavier or lighter than water simultaneously. Based on the conventional hydrocyclone, the structural modifications with a section in the middle and a volute chamber on the top of the hydrocyclone to accumulate the separated low density particles. Some factors that influence the separation efficiency of hydrocyclone were investigated in this paper. For the heavy phase, those influencing factors included the inlet flow rate and underflow split ratio. For the light one, different outlets for discharging the light phase were taken into account. The results show that there exists an optimum inlet flow rate for a series of underflow split ratios. The top outlet for separating light phase particles is better than the side outlet's.     

Phase separation mechanism during membrane formation by dry‐cast process

Phase separation mechanisms during the membrane formation by dry‐cast process were investigated by light scattering in the cellulose acetate/dimethylformamide (DMF)/2‐methyl‐2,4‐pentanediol system. Phase separation occurred by spinodal decomposition (SD) when paths of the composition changes due to the evaporation of DMF were close to the critical point in the phase diagram. Characteristic properties of the early stage of SD such as an apparent diffusion coefficient and an interface periodic distance were obtained from the Cahn theory. Phase separation occurred by nucleation and growth (NG) when paths of the composition changes were far from the critical point. SEM observation confirmed that the membrane formed by the SD mechanism had interconnected structure, whereas that by the NG mechanism had the closed cell porous structure. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 776–782, 2000     

Flow Characterization of a Three‐Phase Circulating Fluidized Bed Using an Ultrasonic Technique

The axial and radial distributions of solid and gas holdups were investigated in an air‐water‐glass bead circulating fluidized bed (GLSCFB) using a new ultrasonic technique, with a new method based on signal fluctuations. The cross‐sectional averaged gas and solid holdups measured at two axial positions appear to be similar at all studied operating conditions. The radial non‐uniformity decreases with increasing liquid velocity but does not change with an increasing solid circulating rate. The radial distribution of gas holdup was more uniform for 1.3 mm beads than for 433 µm glass beads.     

动态法辅助筛选萃取精馏分离环己烷-苯混合物的溶剂

采用基于UNIFAC模型(改进UNIFAC模型)的较严谨的"动态法"替代传统的"静态法",以FORTRAN语言开发了萃取精馏法分离沸点接近液体混合物(含共沸物)的萃取剂筛选和多元气液平衡预测程序. 经文献中的乙醇-水体系气液平衡实验数据验证,UNIFAC模型和改进UNIFAC模型的平衡气相组成预测结果平均相对误差分别为3.26%和1.74%,表明所开发的程序具有良好的可靠性和适用性. 采用基于改进UNIFAC模型的"动态法"对萃取精馏法分离环己烷-苯混合物的萃取剂进行了计算机高通量筛选,根据适宜萃取剂选取原则和计算结果,经综合考虑选出较好的萃取剂为二氯甲烷和1,2,3-三氯丙烷. 选取二氯甲烷做实验验证,测定了环己烷-苯-二氯甲烷分离体系的部分气液平衡实验数据,结果表明实验值与计算值吻合良好. 以二氯甲烷作为萃取剂具有能耗低、待分离体系热稳定性好和有效能损失小的优点.     

热致相分离法制备明胶多孔支架及其性能研究

本文对热致相分离法制备明胶多孔支架及其性能进行了系统的研究。采用冷冻致孔真空干燥法制备了明胶基组织工程多孔支架,并对影响其结构与性能的因素(如明胶溶液浓度、交联剂用量、体系pH值等)进行了考察。实验结果表明:真空冷冻干燥法制备的明胶基多孔组织工程支架都具有三维孔洞结构;所制备的支架平均孔径可达100μm。