High surface area and mesoporous activated carbon from KOH-activated dragon fruit peels for methylene blue dye adsorption:Optimization and mechanism study

In tnis study,an alternative precursor for production of activated carbon was introduced using dragon fruit(Hylocereus costaricensis) peel(DFP).Moreover,KOH was used as a chemical activator in the thermal carbonization process to convert DFP into activated carbon(DFPAC).In order to accomplish this research,several approaches were employed to examine the elemental composition,surface properties,amorphous and crystalline nature,essential active group,and surface morphology of the DFPAC.The Brunauer-Emmett-Teller test demonstrated a mesoporous structure of the DFPAC has a high surface area of 756.3 m~2·g~(-1).The cationic dye Methylene Blue(MB) was used as a probe to assess the efficiency of DFPAC towards the removal of MB dye from aqueous solution.The effects of adsorption input factors(e.g.DFPAC dose(A:0.04-0.12 g·L~(-1)), pH(B:3-10),and temperature(C:30-50℃)) were investigated and optimized using statistical analysis(i.e.Box-Behnken design(BBD)).The adsorption kinetic model can be best categorized as the pseudo-first order(PFO).Whereas,the adsorption isotherm model can be best described by Langmuir model,with maximum adsorption capacity of DFPAC for MB dye was 195.2 mg·g~(-1) at 50℃.The adsorption mechanism of MB by DFPAC surface was attributed to the electrostatic interaction,π-π interaction,and H-bonding.Finally,the results support the ability of DFP to be a promising precursor for production of highly porous activated carbon suitable for removal of cationic dyes(e.g.MB).     

Application of Aqai Stalks as Biosorbents for the Removal of the Dye Procion Blue MX-R from Aqueous Solution

The aqai palm stalk (Euterpe oleracea) is a food residue used in its natural form (AS) and also protonated (AAS) as biosorbents for the removal of the textile dye Procion Blue MX-R from aqueous solutions. This biosorbent was characterized by infrared spectroscopy, scanning electron microscopy, and nitrogen adsorption-desorption curves. The effects of pH, biosorbent dosages, and shaking time on the biosorption capacities were studied. In the acidic pH region (pH 2.0) the biosorption of the dye was favorable. The minimum contact time to obtain the equilibrium was 8 hours for AS and AAS biosorbents. The general order kinetic model provided the best fit to the experimental data compared with the pseudo-first order and pseudo-second order kinetic adsorption models. The equilibrium data were fitted to the Langmuir, Freundlich, and Sips isotherm models. For both dyes the equilibrium data were best fitted to the Sips isotherm model. The enthalpy and entropy of adsorption of PB were obtained from adsorption equilibrium experiments ranging from 298 to 323 K. Simulated dyehouse effluent was used to check the applicability of the proposed adsorbents for effluent treatment.     

Isotherm,Kinetic, and Thermodynamic of Cationic Dye Removal from Binary System by Feldspar

In this paper, the isotherm, kinetic, and thermodynamic of cationic dye removal onto inorganic adsorbent (Feldspar) were investigated in single and binary systems. Basic Red 18 (BR18) and Basic Blue 41 (BB41) were used as cationic dyes. The characterization of the Feldspar was carried out using X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) techniques. The effect of operational parameters such as adsorbent dosage, initial dye concentration, pH, ionic strength, and temperature on dye removal was studied. It was found that the adsorption of BR18 and BB41 onto Feldspar followed with Langmuir and extended Langmuir isotherms in single and binary systems, respectively. Adsorption kinetic of dyes was found to conform to pseudo-second order kinetic in single and binary system. The thermodynamic data showed that dye adsorption onto Feldspar was spontaneous, endothermic, and physisorption reaction. Based on the data of the present investigation, one could conclude that the Feldspar as an eco-friendly and low-cost adsorbent might be a suitable alternative to remove dyes from colored aqueous solutions containing cationic dyes.     

Poly(methacrylic acid)‐modified chitosan for enhancement adsorption of water‐soluble cationic dyes

The preparation of poly(methacrylic acid)‐modified chitosan microspheres and its application for the removal of cationic dyes, methylene blue (MB) and malachite green (MG), in aqueous solution in a batch system were described. The modified chitosan was characterized using SEM, FTIR, and XPS analyses. The effects of the pH of the solution, contact time, and initial dye concentration were studied. The adsorption capacities of the microspheres for the two cationic dyes increased significantly after the modification because a large number of carboxyl groups were introduced. The equilibrium process was better described by the Langmuir than the Freundlich isotherm. According to the Langmuir equation, the maximum adsorption capacities were 1000.0 and 523.6 mg g^?1 for MB and MG, respectively. Kinetic studies showed better correlation coefficients for a pseudo‐second‐order kinetic model, confirming that the sorption rate was controlled by a chemisorption process. POLYM. ENG. SCI., 2009. © 2008 Society of Plastics Engineers     

Adsorption Behavior of Cationic and Anionic Dyes onto Acid Treated Coconut Coir

The adsorption of Methylene Blue (MB) and Acid Orange 7 (AO7) from aqueous solutions by acid treated coconut coir was investigated under laboratory conditions to assess its potential in removing cationic and anionic dyes. The acid treated coconut coir exhibited better adsorption capacity in cationic dye MB than anionic dye AO7 and the data obtained can be well described by both Langmuir and Freundlich isotherm models. According to the Langmuir isotherm model, the maximum adsorption capacities of MB and AO7 onto acid treated coconut coir were 121 mg/g and 10 mg/g, respectively. The adsorption behavior of MB and AO7 onto acid treated coconut coir was analyzed with first-order Lagergren model and pseudo-second order model.     

Dye adsorption and desorption properties of Mentha pulegium in single and binary systems

This article deals with the dye adsorption and desorption properties of Mentha pulegium (MP) from single and binary (mixture of dyes) systems. Direct Red 80 (DR80) and Acid Black 26 (AB26) were used as model dyes. The Fourier transform infrared (FTIR) was used to investigate the biosorbent characteristics. The effects of biosorbent dosage, contact time, dye concentration, salt, and pH on dye removal were studied. The biosorption isotherms, kinetics, and thermodynamic were studied. In addition, dye desorption was carried out to study adsorbent recovery. The results showed that the isotherm data of single and binary systems of dyes followed the Langmuir isotherm. The adsorption kinetic of the dyes was found to conform to a pseudosecond order kinetic model. Desorption tests showed maximum dye releasing of 97% for DR80 and 95% for AB26 in single system and 92% for DR80 and 94% for AB26 in binary system of dyes at pH 12. The thermodynamic data showed that the biosorption process is spontaneous, endothermic, and a physisorption reaction. It can be concluded that MP is an ecofriendly biosorbent to remove dyes from single and binary systems. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

质子化剩余污泥吸附染料的性能及机理

以城市污水处理厂的剩余污泥为原料,经过质子化处理制备成生物吸附剂,进行了吸附水溶液中活性红4(RR4)和亚甲兰(MB)的研究。溶液的pH值是影响吸附效果的一个重要因素,阴离子型的RR4在酸性条件下吸附量大,而阳离子型的MB则在中性和碱性条件下吸附量大。吸附RR4和MB的数据对Langmuir等温吸附式拟合良好,在pH=2条件下,生物吸附剂对RR4的最大吸附量（qm）为(25.8±0.4)mg·g-1;在pH=7条件下,对MB的最大吸附量（qm）为(161.2±10.0)mg·g-1。电位滴定及FTIR分析表明,这种生物吸附剂主要含有磺酸基、磷酸基及氨基等功能团,其对染料的吸附以单分子层的化学吸附为主,功能团在不同的pH条件下呈现不同的电离性能并在吸附过程中发挥重要作用。     

Removal of methylene blue from aqueous solution by adsorption onto zeolite synthesized from coal fly ash and its thermal regeneration

BACKGROUND: The removal of cationic dyes from wastewater is of great importance. Three zeolites synthesized from coal fly ashes (ZFAs) were investigated as adsorbents to remove methylene blue (MB), a cationic dye, from aqueous solutions. Experiments were conducted using the batch adsorption technique under different conditions of initial dye concentration, adsorbent dose, solution pH, and salt concentration. RESULTS: The adsorption isotherm data of MB on ZFAs were fitted well to the Langmuir model. The maximum adsorption capacities of MB by the three ZFAs, calculated using the Langmuir equation, ranged from 23.70 to 50.51 mg g^?1. The adsorption of MB by ZFA was essentially due to electrostatic forces. The measurement of zeta potential indicated that ZFA had a lower surface charge at alkaline pH, resulting in enhanced removal of MB with increasing pH. MB was highly competitive compared with Na⁺, leading to only a < 6% reduction in adsorption in the presence of NaCl up to 1.0 mol L^?1. Regeneration of used ZFA was achieved by thermal treatment. In this study, 90–105% adsorption capacity of fresh ZFA was recovered by heating at 450 °C for 2 h. CONCLUSION: The experimental results suggest that ZFA could be employed as an adsorbent in the removal of cationic dyes from wastewater, and the adsorptive ability of used ZFA can be recovered by thermal treatment. Copyright © 2010 Society of Chemical Industry     

Adsorption behavior of cationic dyes on citric acid esterifying wheat straw: kinetic and thermodynamic profile

The kinetic and thermodynamic behaviors of cationic dye adsorption onto citric acid esterifying wheat straw (EWS) from aqueous solution were investigated. Two cationic dyes, methylene blue (MB) and crystal violet (CV) were selected as adsorbates. The kinetic and thermodynamic parameters of dye adsorption were examined with a batch system by changing various experimental factors (e.g. initial pH, EWS dosage, dye concentration, contact time, temperature). The MB and CV removal ratios came up to the maximum value beyond pH 4. The 2.0 g/L or up of EWS could almost completely remove MB and CV from 250 mg/L of dye solution. The adsorption percentages of MB and CV kept above 95% over a range from 50 to 350 mg/L of dye concentration when 2.0 g/L of EWS was used. The isothermal data followed the Langmuir model. The adsorption processes could be described by the pseudosecond-order kinetic model. The dual linear plots of intraparticle diffusion indicated that two intraparticle diffusion steps occurred in the dye adsorption processes. The thermodynamic study indicated that the adsorptions of dyes were spontaneous and endothermic. High temperatures favored the adsorption processes.     

Synthesis of cationic polymeric adsorbent and dye removal isotherm,kinetic and thermodynamic

Poly(quaternary ammonium salt) (PQAS) as a cationic polymeric adsorbent was synthesized and characterized by FTIR. Isotherm, kinetic and thermodynamic of dye removal from single and binary systems was investigated. Acid Blue 25 (AB25) and Acid Red 18 (AR18) were used. The effect of operational parameters (adsorbent dose, pH, dye concentration and salt) on dye removal was studied. The dye removal followed the Langmuir isotherm and pseudo-first order kinetics. The adsorbent maximum dye adsorption capacity (Q₀) was 2000 and 1667 mg/g for AB25 and AR18, respectively. The thermodynamic data showed that dye adsorption was spontaneous, endothermic, and a physisorption reaction.     

Multifunctional amphoteric resin to remove both anionic and cationic dyes from aqueous solution

This study reports the synthesis and characterization of a new amphoteric resin, which can be used for the removal of both cationic, methylene blue (MB) and anionic dyes, reactive red-120 (RR-120). The amphoteric resin was characterized by ATR-FTIR, SEM–EDX, TGA/DTA, DLS, BET analysis and also its surface pHpzc was determined. The prepared resin has micro porous structure and its particle size was at the nano level. The prepared amphoteric resin showed high removal affinity for MB in both acidic and basic medium, while for RR-120 high removal affinity in acidic medium. Moreover, it was observed that the amphoteric resin has exhibited almost 100% dye removal up to 600 ppm for MB and up to 300 ppm for RR-120, respectively. The adsorption behavior of both dyes on the amphoteric resin is in agreement with the Langmuir isotherm and the pseudo-second order kinetic model and also electrostatic interaction is dominant in adsorption. Its capacity was slightly low for the MB than that of the commercial activated carbon, but higher for the RR-120. Furthermore, it was observed that the amphoteric resin almost did not lose its high removal efficiency in the concentrated matrix environment for both dyes. After five repeated adsorption–desorption cycles, the high removal efficiency of the resin for the MB (almost 100%) unchanged, but for the RR-120 decreased to 83%.     

Equilibrium and kinetic studies of the cationic dye removal capability of a novel biosorbent Tamarindus indica from textile wastewater

In this paper, the use of tamarind hull biosorbent (Tamarindus indica) has been investigated to remove cationic dyes from textile eflluent. Basic Violet 6 and Basic Red 18 were used as cationic dye models. The surface characteristics of tamarind hull were investigated using Fourier Transform–infrared and scanning electron microscopy. The influence of process variables such as adsorbent dosage, initial dye concentration and pH were studied. The presence of fuctional groups such as hydroxy and amine groups onto the tamarind hull surface were proved by Fourier Transform–infrared analysis. Data were evaluated for compliance with the Langmuir and Freundlich isotherm models. The results indicated that the data for adsorption of Basic Violet 6 and Basic Red 18 onto tamarind hull fitted well with the Freundlich isotherm model. Also, the adsorption kinetics of Basic Violet 6 and Basic Red 18 on biosorbent was studied. The rates of sorption were found to conform to pseudo‐second‐order kinetics with good correlation. Results indicated that tamarind hull could be used as a biosorbent to remove cationic organics from contaminated watercourses.     

Adsorption Studies of Methylene Blue and Malachite Green From Aqueous Solutions by Pretreated Lignocellulosic Materials

Lignocellullosic materials have been used as low-cost adsorbents for the removal of methylene blue (MB) and malachite green (MG) dyes from aqueous solutions. The organic compounds in the adsorbents that contribute to chemical oxygen demand (COD) have been removed through pretreatment of the adsorbents. The percentage of color removal and COD reduction of both MB and MG dyes were found relatively close in values. The adsorption process followed the Langmuir isotherm as well as the Freundlich isotherm and pseudo-second order kinetic model. The process was found to be endothermic in nature.     

Studies on castor seed shell as a sorbent in basic dye contaminated wastewater remediation

The potentialities of castor seed shell (CSS), a waste agricultural by-product, in the remediation of water, contaminated with Methylene Blue (MB), a basic dye, were investigated in the present study. The CSS was ground and washed, thoroughly, to remove any water extractable constituents. The dried CSS was reground, sieved and used in series of agitated batch adsorption experiments. The experiments were conducted to assess the effect of two process variables i.e. initial MB concentration and CSS dosage on the sorption process. The equilibrium sorption isotherm was studied using the two widely used isotherm models (i.e. Freundlich and Langmuir isotherm models). The results from the isotherm studies showed that the process of sorption of MB occurred on a heterogeneous surface of the CSS. The sorption capacity of the CSS, as obtained from the Langmuir plot was 158 mg/g. The mass transfer property of the sorption process was studied using Lagergren pseudo-first-order and chemisorptions pseudo-secondorder kinetic models. The sorption process obeyed the pseudo-second-order kinetic model more than the pseudo-first order; hence the mechanism of the sorption process was analysed further using this kinetic model. The application of the intraparticle diffusion model to determine the rate limiting step showed that intraparticle diffusion is not the singular rate limiting step in the sorption of MB onto CSS. The role of chemisorptions in the mechanism of sorption was established by an empirical relationship between the pseudo-second-order rate constant, K, and the initial MB concentration. The results of this relationship showed that pseudo-second-order chemisorptions are important in the sorption process.     

Adsorption of anionic dyes on poly(epicholorohydrin dimethylamine) modified bentonite in single and mixed dye solutions

The performance of poly(epicholorohydrin dimethylamine) modified bentonite (EPIDMA/bentonite) as an adsorbent to remove anionic dyes, namely Direct Fast Scarlet, Eosin Y and Reactive Violet K-3R, was investigated in single, binary and ternary dye systems. In adsorption experiments in single dye solutions, the adsorption of the three dyes onto EPIDMA/bentonite was described by the Langmuir isotherm model and the pseudo-second-order kinetic model. At low dosage of EPIDMA/bentonite, preferential adsorption was observed for the dye with higher affinity to the adsorbent in mixed dye systems. The reduction in uptake of the dye with increasing equilibrium dye concentration in the isotherm and desorption in the kinetic curves were observed for the dye with lower affinity. The total amount of dyes adsorbed versus the total equilibrium dye concentrations were fitted well by the Langmuir isotherm model. The kinetics of the total adsorbed amount of dyes followed the pseudo-second-order kinetic model. The effect of the dosage of adsorbent on color removal efficiency, residual color distribution and adsorption kinetics was investigated.     

Comparative removal of two textile dyes from aqueous solution by adsorption onto marine-source waste shell: Kinetic and isotherm studies

Scallop shell was used as a low-cost adsorbent for removal of two anionic textile dyes, Reactive Blue 19 (RB19) and Acid Cyanine 5 R (AC5R), from aqueous solutions. The adsorbent was characterized using inductively coupled plasma optical emission spectrometry (ICP-OES), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The dye removal efficiency of scallop shell was determined as function of contact time, solution pH, initial dye concentration and adsorbent dosage. With increasing dye concentration, the adsorption of both dyes decreased, while it increased with increasing adsorbent dosage. Optimum removal of RB19 and AC5R was achieved at pH=6. Adsorption equilibrium data were well described by the Freundlich model. The maximum dye adsorption capacity of scallop shell as estimated from the Langmuir isotherm was 12.36 and 12.47 mg/g for RB19 and AC5R, respectively. The adsorption kinetic data showed excellent correlation with the pseudosecond-order model. It was concluded that scallop shell has a remarkable potential for the sorption of RB19 and AC5R and can be used for treatment of the dye contaminated wastewater.     

Preparation and application of glycidyl methacrylate and methacrylic acid monomer mixture‐grafted poly(ethylene terephthalate) fibers for removal of methylene blue from aqueous solution

A novel fibrous adsorbent that grafts glycidyl methacrylate (GMA) and methacrylic acid (MAA) monomer mixture onto poly(ethylene terephthalate) (PET) fibers was used for removal of methylene blue (MB) in aqueous solutions by a batch equilibration technique. The operation parameters investigated included, pH of solution, removal time, graft yield, dye concentration, and reaction temperature. The adsorption rate of MB is much higher on the MAA/GMA‐grafted PET fibers than on the ungrafted PET fibers. MB was removed 99% the initial dye concentration at 10 mg L⁻¹ and 93% at 200 mg L⁻¹ by monomers mixture‐grafted PET fibers. Pseudofirst order and pseudosecond order kinetic equations were used to examine the experimental data of different graft yield. It was found that the pseudosecond order kinetic equation described the data of dye adsorption on fibrous adsorbent very well. The experimental isotherms data were analyzed using Langmuir and Freundlich isotherm models. The data was that Freundlich isotherm model fits the data very well for the dyes on the fibers adsorbent. The dye adsorbed was easily desorbed by treating with acetic acid/methanol mixture (50% V/V) at room temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010