STUDIES ON THE ADSORPTION OF FURFURAL FROM AQUEOUS SOLUTION ONTO LOW-COST BAGASSE FLY ASH

The present study deals with the sorptive removal of furfural from aqueous solution by carbon-rich bagasse fly ash (BFA). Batch studies were performed to evaluate the influence of various experimental parameters, namely, initial pH (p H ₀), adsorbent dose, contact time, initial concentration, and temperature on the removal of furfural. Optimum conditions for furfural removal were found to be p H ₀ ≈ 5.5, adsorbent dose ≈4 g/L of solution, and equilibrium time ≈4 h. The adsorption followed pseudo-second-order kinetics. The effective diffusion coefficient of furfural is of the order of 10^?13 m²/s. Equilibrium adsorption data on BFA was analyzed by Freundlich, Langmuir, Dubnin-Radushkevich, Redlich-Peterson, and Temkin isotherm equations using regression and error analysis. The Redlich-Peterson isotherm was found to best represent the data for furfural adsorption onto BFA. Adsorption of furfural on BFA is favorably influenced by a decrease in the temperature of the operation. Values of the change in entropy (ΔS ⁰) and heat of adsorption (ΔH ⁰) for furfural adsorption on BFA were negative. The high negative value of change in Gibbs free energy (ΔG ⁰) indicates the feasible and spontaneous adsorption of furfural on BFA.     

Removal of Basic Blue 3 by sorption onto a weak acid acrylic resin

A weak acid acrylic resin was used as an adsorbent for the investigation of Basic Blue 3 (BB3) adsorption kinetics, isotherms, and thermodynamic parameters. Batch adsorption studies were carried out to evaluate the effect of pH, contact time, initial concentration (28–100 mg/g), adsorbent dose (0.05–0.3 g), and temperature (290–323 K) on the removal of BB3. The adsorption equilibrium data were analyzed by the Langmuir, Temkin, and Freundlich isotherm models, with the best fitting being the first one. The adsorption capacity (Q_o) increased with increasing initial dye concentration, adsorbent dose, and temperature; the highest maximum Q_o (59.53 mg/g) was obtained at 323 K. Pseudo‐first‐order and pseudo‐second‐order kinetic models and intraparticle diffusion models were used to analyze the kinetic data; good agreement between the experimental and calculated amounts of dye adsorbed at equilibrium were obtained for the pseudo‐second‐order kinetic models for the entire investigated concentrations domain. Various thermodynamic parameters, such as standard enthalpy of adsorption (ΔH^o = 88.817 kJ/mol), standard entropy of adsorption (ΔS^o = 0.307 kJ mol^?1 K^?1), and Gibbs free energy (ΔG^o < 0, for all temperatures investigated), were evaluated and revealed that the adsorption process was endothermic and favorable. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Modelling Individual and Competitive Adsorption of Cadmium(II) and Zinc(II) Metal Ions from Aqueous Solution onto Bagasse Fly Ash

Abstract

The present study deals with the competitive adsorption of cadmium (Cd(II)) and zinc (Zn(II)) ions onto bagasse fly ash (BFA) from binary systems. BFA is a waste obtained from the bagasse‐fired boilers of sugar mills. The initial pH≈6.0 is found to be the optimum for the individual removal of Cd(II) and Zn(II) ions by BFA. The equilibrium adsorption data were obtained at different initial concentrations (C ₀ = 10–100 mg/l), 5 h contact time, 30°C temperature, BFA dosage of 10 mg/l at pH ₀ = 6. The Redlich–Peterson (R–P) and the Freundlich models represent the single ion equilibrium adsorption data better than the Langmuir model. The adsorption capacities in the binary‐metal mixtures are in the order Zn(II)>Cd(II) and is in agreement with the single‐component adsorption data. The equilibrium metal removal decreases with increasing concentrations of the other metal ion and the combined action of Cd(II) and Zn(II) ions on BFA is found to be antagonistic. Equilibrium isotherms for the binary adsorption of Cd(II) and Zn(II) ions on BFA have been analyzed by non‐modified Langmuir, modified Langmuir, extended‐Langmuir, Sheindorf–Rebuhn–Sheintuch (SRS), non‐modified R–P and modified R–P adsorption models. The isotherm model fitting has been done by minimizing the Marquardt's percent standard deviation (MPSD) error function using MS Excel. The SRS model satisfactory fits for most of the adsorption equilibrium data of Cd(II) and Zn(II) ions onto BFA.     

Optimization and analysis of nickel adsorption on microwave irradiated rice husk using response surface methodology (RSM)

BACKGROUND: The removal of heavy metals using adsorption techniques with low cost biosorbents is being extensively investigated. The improved adsorption is essentially due to the pores present in the adsorbent. One way of improving the porosity of the material is by irradiation of the precursor using microwaves. In the present study, the adsorption characteristics of nickel onto microwave‐irradiated rice husks were studied and the process variables were optimized through response surface methodology (RSM). RESULT: The adsorption of nickel onto microwave‐irradiated rice husk (MIRH) was found to be better than that of the raw rice husk (RRH). The kinetics of the adsorption of Ni(II) from aqueous solution onto MIRH was found to follow a pseudo‐second‐order model. Thermodynamic parameters such as standard Gibbs free energy (ΔG°), standard enthalpy (ΔH°), and standard entropy (ΔS°) were also evaluated. The thermodynamics of Ni(II) adsorption onto MIRH indicates that it is spontaneous and endothermic in nature. The response surface methodology (RSM) was employed to optimize the design parameters for the present process. CONCLUSION: Microwave‐irradiated rice husk was found to be a suitable adsorbent for the removal of nickel(II) ions from aqueous solutions. The adsorption capacity of the rice husk was found to be 1.17 mg g^?1. The optimized parameters for the current process were found as follows: adsorbent loading 2.8 g (100 mL)^?1; Initial adsorbate concentration 6 mg L^?1; adsorption time 210 min.; and adsorption temperature 35 °C. Copyright © 2008 Society of Chemical Industry     

Removal of Cu(II), Fe(III), and Cr(III) from Aqueous Solution by Aniline Grafted Silica Gel

Abstract

The aniline moiety was covalently grafted onto silica gel surface. The modified silica gel with aniline groups (SiAn) was used for removal of Cu(II), Fe(III), and Cr(III) ions from aqueous solution and industrial effluents using a batch adsorption procedure. The maximum adsorption of the transition metal ions took place at pH 4.5. The adsorption kinetics for all the adsorbates fitted better the pseudo second‐order kinetic model, obtaining the following adsorption rate constants (k₂): 1.233 · 10^?2, 1.902 · 10^?2, and 8.320 · 10^?3 g · mg^?1 min^?1 for Cr(III), Cu(II), and Fe(III), respectively. The adsorption of these transition metal ions were fitted to Langmuir, Freundlich, Sips, and Redlich‐Peterson isotherm models; however, the best isotherm model fitting which presented a lower difference of the q (amount adsorbed per gram of adsorbent) calculated by the model from the experimentally measured, was achieved by using the Sips model for all adsorbates chosen. The SiAn adsorbent was also employed for the removal of the transition metal ions Cr(III) (95%), Cu(II) (95%), and Fe(III) (94%) from industrial effluents, using the batch adsorption procedure.     

EFFECT OF TEMPERATURE ON THE ADSORPTION OF METHYLENE BLUE DYE ONTO SULFURIC ACID–TREATED ORANGE PEEL

The present study explains the preparation and application of sulfuric acid–treated orange peel (STOP) as a new low-cost adsorbent in the removal of methylene blue (MB) dye from its aqueous solution. The effects of temperature on the operating parameters such as solution pH, adsorbent dose, initial MB dye concentration, and contact time were investigated for the removal of MB dye using STOP. The maximum adsorption of MB dye onto STOP took place in the following experimental conditions: pH of 8.0, adsorbent dose of 0.4 g, contact time of 45 min, and temperature of 30°C. The adsorption equilibrium data were tested by applying both the Langmuir and Freundlich isotherm models. It is observed that the Freundlich isotherm model fitted better than the Langmuir isotherm model, indicating multilayer adsorption, at all studied temperatures. The adsorption kinetic results showed that the pseudo-second-order model was more suitable to explain the adsorption of MB dye onto STOP. The adsorption mechanism results showed that the adsorption process was controlled by both the internal and external diffusion of MB dye molecules. The values of free energy change (ΔG ^o) and enthalpy change (ΔH ^o) indicated the spontaneous, feasible, and exothermic nature of the adsorption process. The maximum monolayer adsorption capacity of STOP was also compared with other low-cost adsorbents, and it was found that STOP was a better adsorbent for MB dye removal.     

Synthesis and application of nanocomposite Fe3O4@SiO2@CTAB–SiO2 as a novel adsorbent for removal of cyclophosphamide from water samples

ABSTRACT

We present a way of synthesizing nanocomposite Fe₃O₄@SiO₂@CTAB–SiO₂ by employing simple sol–gel technique with selective etching for extreme selectivity adsorption of cyclophosphamide (CP). The transmission electron microscopy (TEM); scanning electron microscopy (SEM); X-ray diffraction (XRD); Fourier transform infrared (FT-IR); vibrating sample magnetometer (VSM); pH_PZC; and Brunauer, Emmett and Teller (BET) techniques were used for nanocomposite characterization. These nanoparticles have an S_BET of 157.8 m² g^?1 and a high saturation magnetization of 67.5 emu g^?1. First, the adsorption system was examined as a function of contact time under various initial CP contents, ionic strength, initial solution pH, adsorbent dose and temperature in batch test. The optimum dose, pH and contact time were obtained to be 0.01 g, 7.0 and 30 min, respectively. Ultimately, experimental isotherm and kinetics data of adsorption of CP onto nanocomposite Fe₃O₄@SiO₂@CTAB–SiO₂ were fitted to classical models. Additionally, it was found that the maximum adsorption process capacity of CP on adsorbent was 342.8 mg g^?1.     

Phosphate Removal from Aqueous Solution Using Coir-Pith Activated Carbon

The present study deals with the removal of phosphates from aqueous solution using activated carbon developed from coir pith. Batch adsorption experiments were performed to delineate the effect of initial pH, contact time, adsorbent dose and temperature on the removal of phosphates by coir-pith activated carbon (CAC) (activated by H₂SO₄). The removal was found to be maximum in the pH range of 6–10. The kinetics of adsorption showed that the phosphate adsorption onto CAC was a gradual process with a quasi-equilibrium being attained in 3 h. The adsorption equilibrium data followed the Temkin isotherm. Thermodynamic parameters such as ΔG ^o , ΔH ^o , and ΔS ^o were evaluated by applying the Arrhenius and van't Hoff equations, and it was found that the adsorption of phosphate on CAC was spontaneous and endothermic.     

Removal of Copper (II) Ions from Aqueous Solutions using Na‐mordenite

Abstract

The potential to remove copper (II) ions from aqueous solutions using Na‐mordenite, a common zeolite mineral, was thoroughly investigated. The effects of relevant parameters solution pH, adsorbent dose, ionic strength, and temperature on copper (II) adsorption capacity were examined. The sorption data followed the Langmuir, Freundlich, and Dubinin‐Radushkevich (D‐R) isotherms. The maximum sorption capacity was found to be 10.69 mg/g at pH 6, initial concentration of 40 mg/dm³, and temperature of 40°C. Different thermodynamic parameters viz., changes in standard free energy (ΔG⁰), enthalpy (ΔH⁰), and entropy (ΔS⁰) have also been evaluated and the results show that the sorption process was spontaneous and endothermic in nature. The dynamics of the sorption process were studied and the values of rate constant of adsorption, rate constant of intraparticle diffusion were calculated. The activation energy (E_a) was found to be 11.25 kJ/mol in the present study, indicating a chemical sorption process involving weak interactions between sorbent and sorbate. The interaction between copper (II) ions and Na‐mordenite is mainly attributable to ion exchange. The sorption capacity increased with the increase of solution pH and the decrease of ionic strength and adsorbent dose. The Na‐mordenite can be used to separate copper (II) ions from aqueous solutions.     

p-Sulphonatocalix[8]arene functionalized silica resin for the enhanced removal of methylene blue from wastewater: equilibrium and kinetic study

ABSTRACT

The present investigation represents the synthesis of new p-sulphonatocalix[8]arene-based silica resin, p-SC8SR (5) and its application for the enhanced removal of methylene blue (MB) dye from contaminated water. The new p-SC8SR (5) resin was characterized by FT-IR, SEM, and EDX spectroscopy. The adsorption of MB on p-SC8SR (5) was investigated systematically by evaluating the effects of adsorbent dosage, initial pH, contact time, dye concentration, and ionic strength. Excellent adsorption (94%) of MB on p-SC8SR (5) was achieved at pH 9.5, contact time 10 min by using 0.2 mol L^?1 ionic strength and 2 × 10^?5 M initial MB dye concentration. Kinetic behavior of MB dye adsorption process on the newly synthesized p-SC8SR (5) adsorbent follows the pseudo-second-order rate model (R² = 0.998 and 0.999 for 2 × 10^?5 M and 1 × 10^?4 M, respectively). Adsorption isotherms were fitted well by the Freundlich model with excellent value of coefficient of determination (R²) = 0.995 which demonstrated that the adsorption of MB follows multilayer mechanism. Wastewater samples contaminated with MB were used to assess efficiency of the p-SC8SR (5) adsorbent. Results indicated that newly synthesized p-SC8SR (5) was found to be efficient adsorbent. During the removal process, the role of different functional groups’ cyclic structure was scrutinized and found that the ionic property as well as π–π interaction of host molecules played imperative role in the extent of adsorption.     

Synthesis of graphene oxide decorated with strontium oxide (SrO/GO) as an efficient nanocomposite for removal of hazardous ammonia from wastewater

ABSTRACT

In this research, graphene oxide decorated with strontium oxide (SrO/GO) is introduced as a new adsorbent material for the efficient removal of ammonia from industrial wastewater. The new adsorbent was thoroughly studied in terms of morphology, crystallography and chemical composition using characterization techniques such as Fourier transform infrared (FTIR), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and zeta potential analysis. Several parameters such as pH, adsorbent dosage, contact time, and ammonia initial concentration were investigated and optimized. Ammonia adsorption onto SrO/GO was validated with kinetics and adsorption isotherms by adopting different models. The results revealed that ammonia adsorption kinetic was of pseudo-second order (R² = 0.999) implying that chemisorption behavior and the equilibrium isotherm follows Langmuir model. This behavior shows a high maximum monolayer sorption capacity of 90.1 mg g^?1 at pH equal to 7 and contact time of 120 min pointing out the synergism advantageous effect. The abundant oxygen functional groups on the graphene oxide surface and the integrated Sr-O nanoparticles could efficiently interact with ammonia species creating a surface for more favorable and efficient removal of ammonia.     

Utilization of paper mill sludge for removal of cationic textile dyes from aqueous solutions

ABSTRACT

The present study is concerned usage of paper mill sludge (PMS) as an effective adsorbent to remove the two cationic character dyes (Basic Blue 3 [BB3] and Basic Yellow 28 [BY28]) from aqueous solutions. The surface morphology and some characteristics of PMS were determined by Fouirer Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM) and Brunauer Emmett Teller (BET). The parameters affecting the process – temperature (10–55°C), adsorbent dose (0.5–10 g/l), initial pH (2–10 pH), initial concentration (50–250 mg/l) and contact time (0–24 h) – were examined in the batch adsorption experiments. Maximum adsorption capacities (q_max) of two dyes at 1 g/l dose and pH value of 7 were also calculated as 89.35 and 79.81, respectively. Adsorption phenomena of BB3 and BY28 cationic dyes onto PMS is controlled by pseudo-second-order model. Thereafter, equilibrium experimental data were applied to Langmuir, Freundlich and Dubinin–Redushkevich (D-R) isotherms, and Langmuir isotherm is the best represent the equilibrium adsorption process for both dyes. The processes occurred by physical adsorption because of calculated activation values (E_a) of BB3 and BY28 dyes were 19.43 and 9.35 kJ/mol, respectively. In addition, based on thermodynamic calculations such as free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°), the results clearly demonstrated that the adsorption process were of exothermic and spontaneous nature for both dyes. At the light of obtained findings, it can be stated that PMS can be used effectively in removal of cationic dyes from textile wastewaters and is an alternative to commercial adsorbents due to its low-cost and abundance in the paper industries.     

Effect of Temperature on Kinetics and Adsorption Profile of Endothermic Chemisorption Process: –Tm(III)–PAN Loaded PUF System

Abstract

The sorption behavior of 3.18×10^?6 mol l^?1 solution of Tm(III) metal ions onto 7.25 mg l^?1 of 1‐(2‐pyridylazo)‐2‐naphthol (PAN) loaded polyurethane foam (PUF) has been investigated at different temperatures i.e. 303 K, 313 K, and 323 K. The maximum equilibration time of sorption was 30 minutes from pH 7.5 buffer solution at all temperatures. The various rate parameters of adsorption process have been investigated. The diffusional activation energy (ΔE_ads) and activation entropy (ΔS_ads) of the system were found to be 22.1±2.6 kJ mol^?1 and 52.7±6.2 J mol^?1 K^?1, respectively. The thermodynamic parameters such as enthalpy (ΔH), entropy (ΔS), and Gibbs free energy (ΔG) were calculated and interpreted. The positive value of ΔH and negative value of ΔG indicate that sorption is endothermic and spontaneous in nature, respectively. The adsorption isotherms such as Freundlich, Langmuir, and Dubinin–Radushkevich isotherm were tested experimentally at different temperatures. The changes in adsorption isotherm constants were discussed. The binding energy constant (b) of Langmuir isotherm increases with temperature. The differential heat of adsorption (ΔH_diff), entropy of adsorption (ΔS_diff) and adsorption free energy (ΔG_ads) at 313 K were determined and found to be 38±2 kJ mol^?1, 249±3 J mol^?1 K^?1 and –40.1±1.1 kJ mol^?1, respectively. The stability of sorbed complex and mechanism involved in adsorption process has been discussed using different thermodynamic parameters and sorption free energy.     

An economically viable removal of methylene blue by adsorption on activated carbon prepared from rice husk

Application of an agricultural waste material, rice husk, has been investigated for preparation of activated carbon. The rice husk‐activated carbon (RHAC) was successfully utilised for the removal of a cationic dye, methylene blue (MB) from aqueous solutions. The activated carbon was prepared in presence of ZnCl₂ as an activating agent under inert nitrogen atmosphere. RHAC was characterised for surface area, pore structural parameters, and point zero charge (pH_ZPC). The activated carbon was further characterised by Fourier transformation infrared (FT‐IR) spectrometer, X‐ray diffractometer (XRD), and scanning electron microscope (SEM). The effect of different parameters such as contact time and initial concentration, adsorbent dose, and temperature on removal of the dye from aqueous solutions was investigated. The experimental data fitted well in both the Freundlich and Langmuir isotherm models. The maximum adsorption capacity for MB was found to be 9.73 mg g⁻¹ at 303 K. During the study of effect of adsorbent dose, almost a 100% removal was achieved at a higher dose of RHAC. Most of the experiments were carried out at an initial concentration of MB of 60 mg/L and at 303 K. Different thermodynamic parameters, viz., changes in free energy (G°), enthalpy (H°), and entropy (S°) have also been determined to explain feasibility of the process of removal. The sorption of MB on RHAC was found to be feasible, spontaneous, and endothermic in nature.     

Effect of Cationic Surfactant on the Adsorption of Arsenites onto Akaganeite Nanocrystals

Abstract

The current research focuses on removal of arsenite ions from aqueous solutions by a new adsorbent, surfactant modified akaganeite (Ak_m), prepared after the adsorption of the cationic surfactant, hexadecyl trimethyl ammonium bromide (N‐Cetyl‐N,N,N‐Trimethylammonium Bromide) onto akaganeite. The new adsorbent was investigated with Fourier transform infrared spectra and X‐ray photoelectron spectroscopy methods for a better understanding of the effects of surface properties on arsenite adsorption. Surfactant modified akaganeite was found to be an effective adsorbent for the removal of arsenite ions from aqueous systems. It presented a significantly higher arsenite adsorption capacity than the pure nanocrystalline akaganeite. Kinetics of adsorption obeys a second‐order rate equation. The maximum adsorption capacity was found to 328.3 mg g^?1 over a wide pH range significantly higher than those of other adsorbents reported.     

Adsorption Characteristics of Chromium(VI) Ions onto Fe(III)-Coordinated Amino-Functionalized Poly(glycidylmethacrylate)-Grafted TiO2-Densified Cellulose

An investigation was conducted with a newly developed adsorbent, iron(III)- coordinated amino-functionalized poly(glycidylmethacrylate)-grafted TiO₂-densified cellulose (Fe(III)-AM-PGDC) on the removal of chromium(VI) from aqueous solution. Batch experiments were performed under various conditions of time, pH, concentration, dose, ionic strength, and temperature. Adsorption of Cr(VI) on Fe(III)-AM-PGDC was dominated by ion exchange or outer-sphere complexation. The maximum adsorption capacity was found to be 109.76 mg g^?1. Thermodynamic study showed that adsorption of Cr(VI) onto Fe(III)-AM-PGDC is more favored. The complete removal of Cr(VI) from electroplating wastewater was achieved by the adsorbent. The adsorbent did not lose its adsorption capacity even after the fourth regeneration.     

Electron Beam Grafted Polymer Adsorbent for Removal of Heavy Metal Ion from Aqueous Solution

Abstract

An electron beam grafted adsorbent was synthesized by post irradiation grafting of acrylonitrile (AN) on to a non‐woven thermally bonded polypropylene (PP) sheet using 2 MeV electron beam accelerator. The grafted poly(acrylonitrile) chains were chemically modified to convert a nitrile group to an amidoxime (AMO) group, a chelating group responsible for metal ion uptake from an aqueous solution. The effect of various experimental variables viz. dose, dose rate, temperature, and solvent composition on the grafting extent was investigated. PP grafted with the amidoxime group (AMO‐g‐PP) was tested for its suitability as an adsorbent for removal of heavy metal ions such as Co²⁺, Ni²⁺, Mn²⁺, and Cd²⁺ from aqueous solution. Langmuir and Freundlich adsorption models were used to investigate the type of adsorption of these ions. The adsorption capacities of the adsorbent for the metal ions were found to follow the order Cd²⁺>Co²⁺>Ni²⁺>Mn²⁺. The kinetics of adsorption of these ions indicated that the rate of adsorption of Cd²⁺ was faster than that of other ions studied.     

Fly ash as a sorbent for boron removal from aqueous solutions: Equilibrium and thermodynamic studies

ABSTRACT

This study presents the application of fly ash from brown coal and biomass burning power plant as a sorbent for the removal of boron ions from an aqueous solution. The adsorption process efficiency depended on the parameters, such as adsorbent dosage, pH, temperature, agitation time and initial boron concentration. The experimental data fitted well with the Freundlich isotherm model and the maximum capacity was found to be 16.14 mg g^?1. The adsorption kinetics followed the pseudo-second-order model. Also, the intra-particle diffusion model parameters were calculated. Thermodynamic parameters such as change in free energy (ΔG°), enthalpy (ΔH°), entropy (ΔS°) revealed on exothermic nature of boron adsorption onto the fly ash.     

Preparation and characterization of selective phenyl thiosemicarbazide modified Au(III) ion‐imprinted cellulosic cotton fibers

In this study, a novel selective Au(III) chelating surface ion imprinted fibers based on phenyl thiosemicarbazide modified natural cotton (Au‐C‐PTS) has been synthesized, and applied for selective removal of Au(III) from aqueous solutions. Batch adsorption experiments were performed with various parameters, such as contact time, pH, initial Au(III) concentration, and temperature. The kinetic studies revealed that the adsorption process could be described by pseudo‐second‐order kinetic model, while the adsorption data correlated well with the Langmuir and Freundlich models. The maximum adsorption capacities calculated from the Langmuir equation are 140 ± 1 mg g^?1 and 72 ± 1 mg g^?1 at pH 5 for both Au‐C‐PTS and NI‐C‐PTS, respectively. The estimated thermodynamic parameters (Gibbs free energy (ΔG°), enthalpy (ΔH°), and entropy change (ΔS°)) indicated the spontaneity and exothermic nature of the adsorption process. Furthermore, the selectivity study revealed that the ion imprinted fibers was highly selective to Au(III) compared with Cu(II), Cd(II), Hg(II), and Fe(III). The adsorbent was successfully regenerated with a 0.1M HNO₃ solution. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40769.     

Removal of Cr(VI) From Aqueous Solution by Turkish Vermiculite: Equilibrium,Thermodynamic and Kinetic Studies

Abstract

The adsorption of Cr(VI) from aqueous solution by Turkish vermiculite were investigated in terms of equilibrium, kinetics, and thermodynamics. Experimental parameters affecting the removal process such as pH of solution, adsorbent dosage, contact time, and temperature were studied. Equilibrium adsorption data were evaluated by Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherm models. Langmuir model fitted the equilibrium data better than the Freundlich model. The monolayer adsorption capacity of Turkish vermiculite for Cr(VI) was found to be 87.7 mg/g at pH 1.5, 10 g/L adsorbent dosage and 20°C. The mean free energy of adsorption (5.9 kJ/mol) obtained from the D–R isotherm indicated that the type of sorption was essentially physical. The calculated thermodynamic parameters (ΔG ^o , ΔH ^o and ΔS ^o ) showed that the removal of Cr(VI) ions from aqueous solution by the vermiculite was feasible, spontaneous and exothermic at 20–50°C. Equilibrium data were also tested using the adsorption kinetic models and the results showed that the adsorption processes of Cr(VI) onto Turkish vermiculite followed well pseudo-second order kinetics.