Poly(methacrylic acid)‐modified chitosan for enhancement adsorption of water‐soluble cationic dyes

The preparation of poly(methacrylic acid)‐modified chitosan microspheres and its application for the removal of cationic dyes, methylene blue (MB) and malachite green (MG), in aqueous solution in a batch system were described. The modified chitosan was characterized using SEM, FTIR, and XPS analyses. The effects of the pH of the solution, contact time, and initial dye concentration were studied. The adsorption capacities of the microspheres for the two cationic dyes increased significantly after the modification because a large number of carboxyl groups were introduced. The equilibrium process was better described by the Langmuir than the Freundlich isotherm. According to the Langmuir equation, the maximum adsorption capacities were 1000.0 and 523.6 mg g^?1 for MB and MG, respectively. Kinetic studies showed better correlation coefficients for a pseudo‐second‐order kinetic model, confirming that the sorption rate was controlled by a chemisorption process. POLYM. ENG. SCI., 2009. © 2008 Society of Plastics Engineers     

EFFECT OF TEMPERATURE ON THE ADSORPTION OF METHYLENE BLUE DYE ONTO SULFURIC ACID–TREATED ORANGE PEEL

The present study explains the preparation and application of sulfuric acid–treated orange peel (STOP) as a new low-cost adsorbent in the removal of methylene blue (MB) dye from its aqueous solution. The effects of temperature on the operating parameters such as solution pH, adsorbent dose, initial MB dye concentration, and contact time were investigated for the removal of MB dye using STOP. The maximum adsorption of MB dye onto STOP took place in the following experimental conditions: pH of 8.0, adsorbent dose of 0.4 g, contact time of 45 min, and temperature of 30°C. The adsorption equilibrium data were tested by applying both the Langmuir and Freundlich isotherm models. It is observed that the Freundlich isotherm model fitted better than the Langmuir isotherm model, indicating multilayer adsorption, at all studied temperatures. The adsorption kinetic results showed that the pseudo-second-order model was more suitable to explain the adsorption of MB dye onto STOP. The adsorption mechanism results showed that the adsorption process was controlled by both the internal and external diffusion of MB dye molecules. The values of free energy change (ΔG ^o) and enthalpy change (ΔH ^o) indicated the spontaneous, feasible, and exothermic nature of the adsorption process. The maximum monolayer adsorption capacity of STOP was also compared with other low-cost adsorbents, and it was found that STOP was a better adsorbent for MB dye removal.     

Low-cost,green synthesis and adsorption properties for dyes of novel porous gangue/palygorskite composite microspheres

In this work, gangue/palygorskite composite microspheres were fabricated through spray drying process and activated by calcination treatment. Its microstructure and adsorption capacity for the removal of dye (MB) were also studied, systematically. Results showed that kaolinite, α-quartz and palygorskite were the major phases in microspheres after proper calcination (lower than 900°C). BET-specific surface area of the microspheres reached the maximum value of 62.23 m²/g at 700°C, and then decreased with further increasing the heating temperature. In general, composite microspheres showed the largest adsorption capacity of MB after heat-treated at 700°C. The q_max of MB onto microspheres was 29.9-51.9 mg/g. The adsorption process of MB onto microspheres was well described by both the pseudo-second-order kinetic and Langmuir isotherm model. The composite microspheres also had extraordinary recyclability. This novel microsphere could be employed as a candidate for novel absorbent and filter medium in the practical application for dye treatment in industrial applications.     

Adsorption Behavior of Cationic and Anionic Dyes onto Acid Treated Coconut Coir

The adsorption of Methylene Blue (MB) and Acid Orange 7 (AO7) from aqueous solutions by acid treated coconut coir was investigated under laboratory conditions to assess its potential in removing cationic and anionic dyes. The acid treated coconut coir exhibited better adsorption capacity in cationic dye MB than anionic dye AO7 and the data obtained can be well described by both Langmuir and Freundlich isotherm models. According to the Langmuir isotherm model, the maximum adsorption capacities of MB and AO7 onto acid treated coconut coir were 121 mg/g and 10 mg/g, respectively. The adsorption behavior of MB and AO7 onto acid treated coconut coir was analyzed with first-order Lagergren model and pseudo-second order model.     

Adsorption characteristics of methylene blue onto the N-succinyl-chitosan-<Emphasis Type="Italic">g</Emphasis>-polyacrylamide/attapulgite composite

N-succinyl-chitosan-g-polyacrylamide/attapulgite (NSC-g-PAM/APT) composite was applied as adsorbent for the removal of methylene blue (MB) from aqueous solution. The initial pH value of the dye solutions, the contact temperature, the contact time and the concentration of the dye solutions on adsorption capacity of the composite for MB dye were investigated. The adsorption kinetics and isotherms were also studied. It was shown that all the sorption processes were better fitted by pseudo-second-order equation and the Langmuir equation. The results indicated that the adsorption capacity of the composite was higher than those of chitosan (CTS) and attapulgite (APT). The desorption studies revealed that the composite provided the potential for regeneration and reuse after MB dye adsorption, which implied that the composite could be used as quite effective adsorbent for the removal of MB from aqueous solution.     

Preparation,characterization, and adsorption properties of chitosan microspheres crosslinked by formaldehyde for copper (II) from aqueous solution

The chitosan microspheres crosslinked by formaldehyde were prepared by spray drying method and used as an adsorbent for copper (II) from aqueous solution. A batch adsorption system was applied to study the adsorption of copper (II) from aqueous solution by chitosan microspheres. The maximum adsorption capacity of the chitosan microspheres for copper (II) was 144.928 mg/g at pH 6.0. Langmuir adsorption model was found to be applicable in interpreting the adsorption process. To elucidate the adsorption mechanism, the chitosan microspheres before and after copper (II) adsorption were further characterized by Fourier transform infrared spectra, zeta potential analysis, and scanning electron microscope. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Adsorptive removal of methylene blue from aqueous solution on activated carbon prepared from Malawian baobab fruit shell wastes: Equilibrium,kinetics and thermodynamic studies

Baobab fruit shell (BFS), a renewable bio-waste from Malawian baobab tree was used as a precursor for the production of a low-cost activated carbon to remove methylene blue (MB) from aqueous solution. Parameters such as contact time, initial methylene blue concentration, adsorbent dose and temperature were studied. The adsorption process can be well described by both Langmuir isotherm and the pseudo-second-order kinetics. The maximum monolayer adsorption capacity of MB dye was ca. 334.45 mg/g. The negative value of the Gibb’s free energy and positive value of adsorption enthalpy showed the spontaneous nature and endothermic nature of the adsorption process, respectively.     

Adsorption Characteristics of Congo Red from Aqueous Solution onto Tea Waste

The feasibility of using tea waste (TW) as a low-cost adsorbent for the adsorption of an anionic dye (Congo red) from aqueous solution has been investigated. Adsorption in a batch process was conducted to study the effect of adsorbent dosage, initial dye concentration, contact time, pH, and temperature. The experimental data were analyzed by the Langmuir, Freundlich, and Temkin models. The adsorption system was best described by the Langmuir isotherm (R ² > 0.99). Adsorption kinetics followed a pseudo-second-order model (R ² > 0.99). The effect of mechanical treatment (vibratory mill) was also studied. The experimental results showed that using this physical treatment leads to an increase in the adsorption capacity of TW from 32.26 to 43.48 mg/g. Thermodynamic analyses revealed that the adsorption of Congo red on TW was endothermic and spontaneous in nature. The results indicated that TW can be employed as a potential low-cost adsorbent for the removal of Congo red from aqueous solution.     

Application of Nano Surfactant Modified Biosorbent as an Efficient Adsorbent for Dye Removal

In the current study, sorption of methylene blue dye (MB) from aqueous solutions, using sawdust modified with sodium dodecyl sulfate (SDS/SD) has been investigated. Sorption experiments were performed using batch and fixed-bed column systems. The effects of important parameters, such as pH, initial dye concentration, flow rate, and bed depth on the sorption of MB dye have been studied. Thomas and the bed-depth service time model (BDST) were applied for analysis of sorption data and estimating of sorption capacity. In order to drive adsorption isotherms, sorption experiments were conducted in batch mode and the treatment of the obtained data were carried out using the Langmuir and Freundlich equations. Based on the breakthrough analysis obtained from continuous sorption experiments, the highest column capacity of 129.68 mg g^?1 was obtained for the SDS/SD adsorbent. The results of this study indicated that surfactant-modified sawdust is much more effective for basic MB dye removal compared to untreated sawdust (SD) and the exhausted SDS/SD column can be easily regenerated using dilute HCl solution with high performance (>95%). The results of this study also indicated the successful applicability of the introduced adsorbent as a very efficient and cost effective adsorbent for the removal of cationic dye molecules from aqueous wastes.     

Effect of heparin coating on epichlorohydrin cross-linked chitosan microspheres on the adsorption of copper (II) ions

Epichlorohydrin cross-linked chitosan microspheres (CS) and chitosan–heparin polyelectrolyte complex microspheres (CSH) were used in the adsorption of copper (II) ions in aqueous solution. The chitosan microspheres were prepared by the phase inversion method. The use of a cross-linking agent improved the resistance to acidic medium. Polyelectrolyte complex microspheres were prepared by impregnating heparin in cross-linked chitosan microspheres. The microspheres were characterized by IR, TGA and DSC. A study on the effect of the pH on the adsorption of copper (II) ions showed that the optimum pH for both CS and CSH microspheres was 6.0. From a kinetic evaluation, it could be established that the adsorption equilibrium was achieved after 8 h for CS and 25 h for CSH microspheres. The adsorption isotherms were interpreted using Langmuir and Freundlich mathematical models. The results revealed that experimental data of CS was best adjusted by Langmuir model, with maximum capacity of surface saturation equal to 39.31 mg g⁻¹. On the other hand, Langmuir and Freundlich models provided a good fit for adsorption by CSH and the adsorption capacity was 81.04 mg g⁻¹. The interactions between copper (II) ions and both CS and CSH were confirmed by electron paramagnetic resonance spectroscopy, which revealed the formation of a square-planar complex with tetrahedral distortion on the surface of the adsorbents.     

Mechanistic,Kinetic, and Thermodynamic Evaluation of Adsorption of Hazardous Malachite Green onto Conch Shell Powder

The present study explores the ability of a new adsorbent—conch shell powder (CSP) in removing Malachite Green from aqueous solutions. The effect of various process parameters, namely initial solution pH, temperature, initial dye concentration, adsorbent dose, and contact time was investigated. Adsorption equilibrium data were well described by the Langmuir isotherm with maximum adsorption capacity of 92.25 mg g^?1 at 303 K. The kinetic data conformed to the pseudo-second-order kinetic model. A thermodynamic study showed the spontaneous nature and feasibility of the adsorption process. The results provide strong evidence to support the hypothesis of adsorption mechanism.     

Adsorption characteristics of tannic acid onto the novel protonated palygorskite/chitosan resin microspheres

Novel protonated palygorskite/chitosan resin microspheres (p‐PCRM) were prepared and applied as adsorbents for the removal of tannic acid (TA) from aqueous solution. The effects of palygorskite (PAL) content, the initial pH value of the TA solution, and contact time and temperature on adsorption capacity of the microspheres were investigated. The adsorption process was found to be pH dependant with an optimum activity at pH 8.0. In comparison with protonated chitosan microspheres (224 mg g^?1), the p‐PCRM with 20 wt % PAL content exhibited higher adsorption capacity (455 mg g^?1) for TA at the same adsorption conditions. This may be attributed to the hydrogen bonding between adsorbents and adsorbates, and the porous structure formed by the introduction of PAL, which were confirmed by Fourier transform infrared and the pore parameters analysis. The study of adsorption kinetics and isotherms showed that the sorption processes were better fitted by pseudo‐second‐order equation and the Langmuir equation, respectively. Furthermore, the desorption study implied that the p‐PCRM were recyclable when 0.1M HCl was used as eluents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Adsorption of Rhodamine B onto O-Carboxymethylchitosan-N-Lauryl

The adsorption of a cationic dye (rhodamine B; RB) on O-carboximethyl-N-acetylated (L-CMCh) in aqueous solution was investigated. The effect of the process parameters such as the contact time, pH, and temperature are reported. Both temperature and pH influence dye adsorption. To determine the adsorption capacity, the equilibrium adsorption data were analyzed by the Langmuir, Langmuir-Freundlich, and Redlich-Peterson isotherm models. The results showed better agreement with the Langmuir-Freundlich model than the other models. The maximum adsorption capacity of RB for L-CMCh was determined as 38.5 mg g^?1 at pH 8.5 and 25°C. The kinetic results follow a pseudo-second-order rate equation. The activation energy value for adsorption of RB on L-CMCh was found to be 52.0 kJ mol^?1. The negative values of Gibbs free energy and enthalpy show the adsorption to be spontaneous and exothermic. The negative value of the enthalpy for adsorption of RB onto L-CMCh shows the adsorption to be exothermic.     

Investigation of Cationic Dye Adsorption from Water onto Acetic Acid Lignin

An adsorbent was prepared from acetic acid lignin (AAL) to investigate the adsorption mechanism of methylene blue (MB) from water. AAL was first deacetylated in NaOH aqueous solution and then fractionated by methanol to prepare adsorbents with various acidic hydroxy groups. The adsorption capacities of MB increased with the increase in initial pH and with the decrease in adsorbent dosage. The results of adsorption kinetics indicated the dye uptake process is a chemisorption. The adsorption capacity of lignin for MB adsorption increased from 18.2 to 63.3 mg g^?1 as AAL was deacetylated and fractionated.     

Adsorption of Cu2+ Cations from Aqueous Solution by S-doped TiO2

S-doped TiO₂ as a novel adsorbent for Cu²⁺ cations removal from aqueous solutions was synthesized by simple sol-gel process. Removal of Cu²⁺ cations from aqueous solutions was investigated with particular reference to the effects of initial Cu²⁺ cations concentration, pH-value, adsorbent dosage, and temperature on adsorption. It was found that the maximum adsorption capacity was 96.35 mg g^?1 at 328 K. The adsorption equilibrium isotherms and the kinetic data were well described by the Langmuir and pseudo-second-order kinetic models, respectively. The high uptake capability of S-doped TiO₂ makes it a potentially attractive adsorbent for the removal of heavy metal pollutants from aqueous solution.     

Removal of methylene blue from aqueous solution by sorption on lignocellulose-g-poly(acrylic acid)/montmorillonite three-dimensional cross-linked polymeric network hydrogels

Batch lignocellulose-g-poly(acrylic acid)/montmorillonite (LNC-g-PAA/MMT) hydrogel nanocomposites were applied as adsorbents. The nanocomposites were characterized by FTIR, XRD, SEM, and TEM. The results showed that montmorillonite (MMT) could react with the monomers and change the structure of polymeric network of the traditional superabsorbent materials, an exfoliated structure was formed in the nanocomposites. The effect of process parameters such as MMT content (wt%), contact time (t), initial concentration of dye solution (C ₀), adsorption temperature (T), and pH value (pH) of the dye solution for the removal of methylene blue (MB) from aqueous solution were also studied. The results showed that the adsorption capacity for MB increased with increasing contact time, initial dye concentration, and pH value, but decreased with increasing MMT content and temperature. The adsorption kinetics were better described by the pseudo-second-order equation, and their adsorption isotherms were better fitted for the langmuir equation. By introducing 20 wt% MMT into LNC-g-PAA polymeric network, the obtaining hydrogel composite showed the high adsorption capacity 1994.38 mg/g and economic advantage for MB. The desorption studies revealed that the composite provided the potential for regeneration and reuse after MB dye adsorption, which implied that the composite could be regarded as a potential adsorbent for cationic dye MB removal in a wastewater treatment process.     

Preparation and Evaluation of Fullers Earth Beads for Removal of Cesium from Waste Streams

Abstract

Fullers earth beads and cylinders were prepared using chitosan and sodium silicate as binders, respectively, for removal of cesium ion from aqueous solutions. The cost of the adsorbent is expected to be significantly lower as the raw materials are low cost materials and readily available. The adsorbents were characterized by SEM, EDS, and x‐ray microanalysis. Adsorption capacity of the beads was evaluated under both batch and dynamic conditions. The adsorption capacity for Fullers earth beads was found to be 26.3 mg/g of adsorbent at 293 K when the liquid phase concentration of cesium was 1000 mg/L. The adsorption capacity of Fullers earth cylinder was found to be higher than that of beads, however, it was concluded that the alkaline nature of the cylinder precipitated out cesium increasing its capacity. The capacity of Fullers earth beads decreased by almost 62% when 1 mol/L NaCl and 2.25 mmol/L of strontium were present in the solution. The Freundlich, the Langmuir isotherm equations, and a modified Polanyi's equation were used to correlate the data. The isosteric heats of adsorption suggested the heterogeneity of the surface and multilayer coverage. The first order reversible kinetic model adequately described the dynamic system during the adsorption process. The adsorption (k₁) and desorption (k₂) rate constants were evaluated from the dynamic model.     

A Novel Pinus Tabulaeformis Based Adsorbent for the Removal of Malachite Green

Pyrolytic char treated with muffle furnace (TPC), a novel adsorbent, were investigated to enhance its adsorption capacity of malachite green (MG) dye. In addition, the dye adsorption behavior of the TPC in aqueous solution was investigated. The treatment temperature, treatment time, and the particle size of PC had a positive effect on the dye adsorption capacity of TPC. Equilibrium data was fitted well with Langmuir and Redlich-Peterson models with maximum adsorption capacity of 91.24, 111.27, and 119.01 mg g^?1 at 293, 303, and 313 K, respectively. The kinetic of adsorption was found to confirm to the Elovich equation with good correlation and the overall rate of MG uptake was found to be controlled by film diffusion, pore diffusion and particle diffusion. The Boyd plot confirmed that the external mass transfer was the rate-limiting step in the adsorption process. Different thermodynamic parameters have also been evaluated and it was found that the adsorption was spontaneous, feasible, and endothermic in nature. Adsorbents could be regenerated using 0.1 mol L^?1 NaOH solution at least three cycles, with up to 90% recovery. The TPC used in this work proved to be an effective material for the treatment of MG bearing aqueous solutions.     

Removal of methylene blue from aqueous solution by adsorption onto zeolite synthesized from coal fly ash and its thermal regeneration

BACKGROUND: The removal of cationic dyes from wastewater is of great importance. Three zeolites synthesized from coal fly ashes (ZFAs) were investigated as adsorbents to remove methylene blue (MB), a cationic dye, from aqueous solutions. Experiments were conducted using the batch adsorption technique under different conditions of initial dye concentration, adsorbent dose, solution pH, and salt concentration. RESULTS: The adsorption isotherm data of MB on ZFAs were fitted well to the Langmuir model. The maximum adsorption capacities of MB by the three ZFAs, calculated using the Langmuir equation, ranged from 23.70 to 50.51 mg g^?1. The adsorption of MB by ZFA was essentially due to electrostatic forces. The measurement of zeta potential indicated that ZFA had a lower surface charge at alkaline pH, resulting in enhanced removal of MB with increasing pH. MB was highly competitive compared with Na⁺, leading to only a < 6% reduction in adsorption in the presence of NaCl up to 1.0 mol L^?1. Regeneration of used ZFA was achieved by thermal treatment. In this study, 90–105% adsorption capacity of fresh ZFA was recovered by heating at 450 °C for 2 h. CONCLUSION: The experimental results suggest that ZFA could be employed as an adsorbent in the removal of cationic dyes from wastewater, and the adsorptive ability of used ZFA can be recovered by thermal treatment. Copyright © 2010 Society of Chemical Industry