The Influence of Alkyl Chain Length and Steric Effect on Extraction of Zinc(II) Complexes with 1‐Alkyl‐2‐Methylimidazoles

Abstract

The extraction of Zn(II) complexes with six 1‐alkyl‐2‐methylimidazoles (alkyl is from C₅H₁₁ up to C₁₂H₂₅) from nitric solution was studied as a function of pH of the aqueous phase. As the organic solvents toluene, p‐xylene and 1,2,3,4‐tetrahydronaphthalene were used. The stability constants of the complexes in the aqueous phase as well as partition constants of the extractable species were determined. It was demonstrated that both the stability constants (β_c) and the partition constants (P_c) of the complexes increased with increasing alkyl chain length. Pseudo‐tetrahedral complexes were found to dominate at the second and third complexation steps, thus increasing the stability constants and facilitating extraction of the Zn(II) complexes with 1‐alkyl‐2‐methylimidazoles.     

The Influence of the Alkyl Chain Length and Steric Effect on Stability Constants and Extractability of Co(II) Complexes with 1‐Alkyl‐4(5)‐methylimidazoles

Abstract

Extraction of Co(II) complexes has been studied with nine derivatives of 1‐alkyl‐4(5)‐methylimidazoles (with R=C₂H₃ to C₁₀H₂₁) from aqueous solution [I=0.5(KNO₃) at 25°C] with toluene, trichloromethane, and 2‐ethyl‐1‐hexanol. Stability constants of the complexes formed in the aqueous phase (β _c ) as well as partition constants (P _c ) of the extracted species were determined. It was demonstrated that both the stability constants and partition constants of the complexes increase with an increasing of the 1‐alkyl chain length. The tetrahedral together with octahedral complexes were formed beginning from the second step of complexation. Furthermore, the influence of the bulkiness of the 1‐alkyl group on separation process of Co(II) from Zn(II) for extractions with toluene and 2‐ethyl‐1‐hexanol were determined.     

The Influence of the Alkyl Chain Length on Extraction Equilibrium of Cu(II) Complexes with 1‐Alkylimidazoles in Aqueous Solution/Organic Solvent Systems

Abstract

The partition of Cu(II) complexes with 1‐alkylimidazoles (with alkyl ranging from 1‐n‐butyl through 1‐n‐hexadecyl) between the aqueous ((0.5HL, K)NO₃) and organic phase has been studied at 25°C. The organic solvents used were toluene, p‐xylene, tetrahydronaphthalene, dichloromethane, 2‐ethyl‐1‐hexanol, and others. Extraction curves have been shown to be displaced towards lower pH values with increasing alkyl chain length of the alkyl substituent. Stability constants of the Cu(II) complexes with the 1‐alkylimidazoles have been determined in the aqueous phase as well as the number of compounds extractable into the organic solvent, and their partition ratios. Stability constants of the complexes did not depend on the alkyl chain length. One or two complexes were transferred to the organic phase. Partition ratios of these complexes, P ₁ and P ₂, increased rapidly with increasing alkyl chain length. They were higher in magnitude than those of their Co(II), Ni(II), and Zn(II) counterparts.     

Effect of the Alkyl Chain Length in N,N‐Dialkylpyridine‐3‐carboxamides upon their Extraction of Copper(II) from Aqueous Chloride Solutions

Abstract

Three nicotinamide derivatives with two butyl, hexyl, or octyl alkyl chains at amide nitrogen were synthesized. These model individual compounds were used for copper(II) extraction from acidic chloride solutions at constant ionic strength I = 1.0. It was found that during the extraction N,N‐dialkylpyridine‐3‐carboxamides form two complexes with copper(II) and chloride ions; these can transfer into the organic phase. In these complexes the molar ratio of copper:chlorine:extractant = 1:2:2 or 1:2:3. The obtained stability constants of N,N‐dihexyl‐ and N,N‐dioctylpyridine‐3‐carboxamides complexes with copper(II) chloride in water are comparable, but N,N‐dibutylpyridine‐3‐carboxamide complexes stability constants are significantly lower. The partition constants of these complexes in toluene–water system depend on amide hydrophobicity, increasing with increasing carbon chain length in N,N‐dialkylpyridine‐3‐carboxamides.     

Influence of the Steric Hindrance,Ligand Hydrophobicity,and DN of solvents on Structure and Extraction of Cu(II) Complexes of 1‐Alkyl‐2‐Ethylimidazoles

Abstract

Formation of Cu(II) complexes of 1‐alkyl‐2‐ethylimidazoles (where alkyl=propyl, butyl, pentyl, hexyl, and octyl) has been studied by using the liquid‐liquid partition method, at 25°C and a fixed ionic strength of the aqueous phase (I=0.5; (HL)NO₃, KNO₃). The complexes were extracted with 2‐pentanone, 2‐butanol, isoamyl alcohol, 2‐ethyl‐1‐hexanol, dichloromethane, trichloromethane, and toluene. The length of the 1‐alkyl group and the nature of solvent have been shown to influence the extraction process. Extraction curves (log D_M vs. pH) are displaced towards lower pH's with increasing chain length of the 1‐alkyl substituent and donor number of the solvents. Stability constants of the complexes in aqueous solution were determined as well as their partition ratios between the aqueous and organic phase. The stability of the Cu(II) complexes increased with increasing 1‐alkyl chain length. The stability constants are comparable with β_n ones for the Cu(II) complexes of 1‐alkyl‐2‐methylimidazoles, but smaller than those of the Cu(II)–1‐alkylimidazole counterparts. The P_c‐partition ratios of the 1‐alkyl‐2‐ethylimidazole complexes with Cu(II) are high, and increased with increasing 1‐alkyl chain length and the donor number of the solvents. Both the strong steric effect of the ethyl substituent at position 2 and the bulkiness of the 1‐alkyl‐2‐ethylimidazole molecules as well as the strong electron‐donating properties of the solvent molecules have an effect on the change of the coordination number of Cu(II) from 6 to 4. The 4‐coordinate Cu(II) complexes (distorted tetrahedron) are more readily extractable by organic solvent than are the 6‐coordinate ones and for this reason their partition constants, P_c, are high. This finding offers the possibility of extraction of the Cu(II) ions from a mixture cations.     

Extraction of Copper(II) with N′,N′-Dialkylhydrazides of Benzoic and Phenylacetic Acids

This article is concerned with the study of the extraction of Cu(II), Co(II), Ni(II), and Zn(II) with N′,N′-dialkylhydrazides of benzoic and phenylacetic acids. The applied reagents are able to extract Cu(II) from ammoniac media efficiently. The influence of the length and structure of alkyl chains on the extraction of Cu(II) has been analyzed. It is shown that N′,N′-dibytil- and N′,N′-dihexylhydrazides of benzoic acid exhibit the most promise for extracting Cu(II) from ammoniac media, and N′,N′-dihexylhydrazide of phenylacetic acid as an extractant is worse than the analogous benzoic acid derivative. Copper stripping has been studied for various concentrations of H₂SO₄, and the copper extraction constants have been calculated. The data obtained indicate that the degree of Cu(II) extraction decreases with increasing concentration of ammonium salts.     

Extraction Behavior of Nickel(II) using some of the BTBP‐Class Ligands

Abstract

Recently the BTBP‐family of solvating ligands have been studied for their ability to separate trivalent actinides from lanthanides. Five of the BTBPs were evaluated for their ability to extract nickel(II) from aqueous nitrate media into cyclohexanone. It was shown by both solvent extraction and X‐ray diffraction experiments that the BTBPs are capable of forming both 1:1 and 1:2 complexes with nickel(II). When the BTBP concentration is low the nickel distribution ratio is governed by the formation of the nickel/BTBP complex while at higher BTBP concentrations the partitioning of the nickel complex between the two phases dictates the nickel distribution ratio.     

Copper(II) Extraction from Phosphoric Acid Media by 5‐Dodecylsalicylaldoxime (LIX 622)

Abstract

The extraction of Cu(II) from phosphoric acid media (0.4–7.3 M) by the commercial reagent LIX 622 in toluene has been studied. Experimental results have been treated numerically and the formation in the organic phase of the complex CuR₂, HR being 5‐dodecylsalicylaldoxime, has been proposed. Values of the conditional extraction constants, which increase with the phosphoric acid concentration, are given. Organic extracts have been analyzed by EPR spectroscopy. The presence of a square planar complex of Cu(II) has been deduced confirming the stoichiometry CuR₂.     

Metal-Ion Type Effect on the Crystal Structure and Optical Properties of 2,2′-bipyridine Complexes of Pb(II) and Cd(II)

To investigate the effect of metal ion type on the crystal structure and optical and thermal behaviors of coordination compounds, two homometal and one heterometal 2,2′-bipyridine complexes of Pb(II) and Cd(II) have been synthesized and characterized by elemental analysis, PXRD, FT-IR and single crystal X-ray diffraction. Crystal structure analysis of heterometal coordination polymer, [Pb₂Cd(2,2′-bipy)₄(NO₃)₆]_n, displays the attendance of a centrosymmetric 1D coordination polymer that crystallizes in the triclinic system with the space group of \({\text{p}}_{1}^{ - }\). Thermal behavior of prepared coordination compounds was examined under air atmosphere by thermogravimetric analysis. The study of optical properties of compounds showed that metal ion type of coordination compounds is influential on their photophysical properties. Moreover, heterometal coordination polymer was doped into a PVK:PBD blend in two different concentrations as a light emitting material in the fabrication of two organic light-emitting diodes.     

Equilibrium Studies on the Synergic Liquid‐Liquid Extraction Process of Copper(II) from Sulphate Media with Mixtures of some Bidentate Mono‐Schiff Bases and Acyclic Polyether Non‐ionic Surfactant in Chloroform

The liquid‐liquid extraction of copper(II) with bidentate mono‐Schiff base extractants(HL), namely, N‐salicylideneaniline (SA), N‐(2‐hydroxy‐1‐naphthalidene)aniline (HNA), N‐salicylidene‐1‐naphthylamine (SN), and N‐(2‐hydroxy‐1‐naphthalidene)‐1‐naphthylamine (HNN), from a weakly acidic sulphate media into chloroform was studied in both the absence and the presence of acyclic polyether non‐ionic surfactant (S). In the absence of the non‐ionic surfactant, the extractability of copper(II) was 92.6% with SA, 89% with HNA, 81% with SN, and 80% with HNN. The estimated extraction constants, (log K_ex) of the four extractants revealed that the extraction efficiency increased in the order HNN< SN< HNA<SA. Besides, it was found that copper(II) was extracted as CuL₂ (HL) with SA and HNA, and as CuL₂ with SN and HNN. The extraction of copper(II) was significantly enhanced with HL into chloroform upon the addition of a non‐ionic surfactant. An extractability of 100% was reached. The stoichiometry of the extracted complexes was CuL₂S. The synergic extraction ability of extractants changed in the order SA>HNA>SN～HNN, whereas, the synergic effect fell in the order HNN>SN>HNA～SA.     

Extraction of Palladium(II) from Nitric Acid Solutions with 1‐Benzoyl‐3‐[6‐(3‐benzoyl‐thioureido)‐hexyl]‐thiourea

The extraction of palladium (II) from HNO₃ solutions with 1‐Benzoyl‐3‐[6‐(3‐benzoyl‐thioureido)‐hexyl]‐thiourea (Ia) and several monodentate thiourea derivatives in 1,2‐dichloroethane has been studied. The effect of HNO₃ concentration in the aqueous phase and that of the extractant in the organic phase on the Pd(II) extraction is considered. The stoichiometry of the extracted complexes has been determined. The increasing number of thioamide groups in the molecule of Ia increases its extraction efficiency towards Pd(II). The potentialities of a polymeric resin impregnated with compound Ia for selective extraction of Pd(II) from nitric acid solutions are demonstrated.     

Effect of Anions on the Extraction of Lanthanides (III) by N,N′‐Dimethyl‐N,N′‐Diphenyl‐3‐Oxapentanediamide

Abstract

The extraction of microquantities of La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y by N,N′‐dimethyl‐N,N′‐diphenyl‐3‐oxapentanediamide (DMDPhOPDA) in 1,2‐dichloroethane from aqueous media containing ClO₄ ^?, PF₆ ^?, (CF₃SO₂)₂N^? anions or by DMDPhOPDA in 1,2‐dichloroethane in the presence of 1‐butyl‐3‐methylimidazolium bis[(trifluoremethyl)sulfonyl]imide ([C₄mim][Tf₂N]) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim][PF₆]) from HNO₃ solutions has been studied. The effect of HNO₃ concentration in the aqueous phase and that of the extractant concentration in the organic phase on the extraction of metal ions is considered. The stoichiometry of the extracted complexes has been determined. The addition of HPF₆ and (CF₃SO₂)₂NH or their salts to the aqueous HNO₃ or HCl solutions leads to an enchancement of lanthanides (III) extraction by DMDPhOPDA. A considerable synergistic effect was observed in the presence of ionic liquids (IL) in the organic phase containing DMDPhOPDA. This effect is connected with the hydrophobic nature of the IL anion. The distribution of ILs between the equilibrium organic and aqueous phases can govern the extractability of lanthanides (III) in DMDPhOPDA‐IL systems.     

Effect of γ-Irradiation on the Electrical Properties of Poly (Methyl Methacrylate) Doped with Some Transition Metal Complexes

Abstract

The electrical resistivity (p) of pure and doped poly(methyl methacrylate), PMMA, with dithizone (HDZ) and its metal complexes, Zn(HDZ)₂, Cd(HDZ)₂ and Hg(HDZ)₂ has been investigated before and after γ-irradiation. The results show a phase transition at nearly 323°K. The activation energy of the conduction process has been calculated below and above the transition temperature. Further information concerning the electrical behaviour is obtained by considering the type and mechanism of the conduction process. This has been achieved by studying the effect of temperature and γ-irradiation on the mobility and the number of charge carriers which take part in the conduction process.     

Selective Extraction of Mercury(II) by 1‐Naphthylthiourea–Methyl Isobutyl Ketone System

Abstract

Selective extraction of Mercury(II) using 1‐naphthylthiourea–methyl isobutyl ketone (ANTU‐MIBK) system from hydrochloric acid solutions (0.1–10 M) has been studied. Influence of foreign ions, acid and ligand concentrations has been investigated. Addition of ANTU in MIBK enhanced, extraction capacity of MIBK to several times. Low effect of foreign ions and high separation factors for a number of metal ions determined at 0.5 M hydrochloric acid concentration evaluated the proposed method efficient and selective. The experimental data obtained from application of the method for extraction of mercury from a synthetic aqueous solution reveal that more than 99% mercury can be separated from cadmium, zinc and selenium in a single step with five minutes equilibration.     

Structural Effect of Pincer Pd(II)–ONO Complexes Modified with Acylthiourea on Sizes of the In Situ Generated Pd Nanoparticles During Heck Coupling Reaction

Catalysis Letters - The Pd nanoparticles generated in situ from Pd–pincer complexes catalyzed Heck coupling reaction. For this purpose, new Pd(II)–ONO pincer complexes (1–4)...     

Characterization of Extraction of Chromatographic Materials Containing Bis(2‐ethyl‐1‐hexyl)Phosphoric Acid, 2‐Ethyl‐1‐Hexyl (2‐Ethyl‐1‐Hexyl) Phosphonic Acid,and Bis(2,4,4‐Trimethyl‐1‐Pentyl)Phosphinic Acid

Abstract

This work describes the uptake of a wide range of metal ions, including alkaline earths, transition metals, post‐transition metals, lanthanides and actinides, from acidic nitrate and chloride media on extraction chromatographic resins prepared from three different acidic organophosphorus compounds: bis(2‐ethyl‐1‐hexyl) phosphoric acid (HDEHP), 2‐ethyl‐1‐hexyl(2‐ethyl‐1‐hexyl)phosphonic acid, (HEH[EHP]) and bis(2,4,4‐trimethyl‐1‐pentyl)phosphinic acid (H[DTMPP]). The data is plotted in a format allowing for the easy comparison of the uptake of all metal ions under a given condition. Additionally, examples of several novel separations using the three extraction chromatographic materials are discussed.     

Removal of Copper (II) Ions from Aqueous Solutions using Na‐mordenite

Abstract

The potential to remove copper (II) ions from aqueous solutions using Na‐mordenite, a common zeolite mineral, was thoroughly investigated. The effects of relevant parameters solution pH, adsorbent dose, ionic strength, and temperature on copper (II) adsorption capacity were examined. The sorption data followed the Langmuir, Freundlich, and Dubinin‐Radushkevich (D‐R) isotherms. The maximum sorption capacity was found to be 10.69 mg/g at pH 6, initial concentration of 40 mg/dm³, and temperature of 40°C. Different thermodynamic parameters viz., changes in standard free energy (ΔG⁰), enthalpy (ΔH⁰), and entropy (ΔS⁰) have also been evaluated and the results show that the sorption process was spontaneous and endothermic in nature. The dynamics of the sorption process were studied and the values of rate constant of adsorption, rate constant of intraparticle diffusion were calculated. The activation energy (E_a) was found to be 11.25 kJ/mol in the present study, indicating a chemical sorption process involving weak interactions between sorbent and sorbate. The interaction between copper (II) ions and Na‐mordenite is mainly attributable to ion exchange. The sorption capacity increased with the increase of solution pH and the decrease of ionic strength and adsorbent dose. The Na‐mordenite can be used to separate copper (II) ions from aqueous solutions.     

Reaction of Aryl Iodides with (PCP)Pd(II)—Alkyl and Aryl Complexes: Mechanistic Aspects of Carbon—Carbon Bond Formation

The reaction of the PCP-type complex Pd(Me){2,6-(ⁱPr₂PCH₂)₂C₆H₃}( 3 ) with phenyl iodide results in the formation of Pd(I){2,6-(ⁱPr₂PCH₂)₂C₆H₃} ( 5 ), methyl iodide, toluene, and biphenyl. Formation of Pd(Ph){2,6-(ⁱPr₂PCH₂)₂C₆H₃}( 4 ) is observed during the reaction by ³¹P NMR. Reaction of 4 with aryl iodides results in the formation of 5 and Ph–Ph, Ph–Ar, and Ar–Ar, products indicative of a radical reaction. Under pseudo-first-order conditions, the rates of the reactions follow the order p-OMe > p-Me > H > p-NO₂ > m-Cl. The reaction is likely to involve electron transfer from 4 to the aryl iodide followed by fast decomposition of a postulated radical cation [Pd(Ph){2,6-(ⁱPr₂PCH₂)₂C₆H₃}]^+. ( 4 ^+.) to give a phenyl radical and [Pd{2,6-(ⁱPr₂PCH₂)₂C₆H₃}]⁺ ( 6 ⁺). Facile decomposition of the aryl iodide radical anion generates an aryl radical and I⁻. Recombination of aryl radicals gives rise to mixed biaryls, and 6 ⁺ combines with I⁻ to give 5 .     

Salt Effects on the Recovery of Phenol by Liquid‐Liquid Extraction with Cyanex 923

Abstract

In this work, the effect of salt addition on the recovery of phenol from a 46 g/L aqueous solution simulating a phenolic resin plant effluent by liquid‐liquid extraction at 298 K has been studied by using an organic phase containing 0.6 M Cyanex 923 extractant in ShellSol T. Addition of sodium sulfate, potassium nitrate, and sodium chloride to the aqueous phase was tested and sodium chloride was selected. Based on the obtained results, a study of phenol recovery process was undergone by taking advantage of the salting‐out effect. Equilibrium curves are presented for liquid‐liquid extraction with and without salt addition to the aqueous phase. An integrated process involving salting‐out and liquid‐liquid extraction was proposed. The stripping concentrates can be reused for phenolic resin production.