Calixarenes 30. Calixquinones

Chlorine dioxide and thallium trifluoroacetate are shown to be useful reagents for the preparation of calixquinones. p-H-Calix[4]arene( 1a ),p-H-calix[5]arene ( 1b ), and p-H-calix[6]arene ( 1c ) are oxidized in modest yields by ClO₂ to the fully quinonoid compounds calix[4]tetraquinone ( 2a ), calix[5]pentaquinone ( 2b ), and calix[6]hexaquinone ( 2c ), respectively. Although Tl(OCOF₃)₃ is less effective for the oxidation of 1a-c , it proves to be the reagent of choice for converting partially etherified or esterified calixarenes carrying p-tert-butyl groups directly to partially quinonoid calixarenes. Thus, monosubstituted calix[4]arenes yield triquinones; disubstituted calix[4]arenes yield diquinones; trisubstituted calix[4]arenes yield monquinones; and tetrasubstituted calix[6]arenes yield diquinones. The structures of the calixquinones have been established by elemental analysis, ¹H NMR spectroscopy, mass spectroscopy, and in the case of 2c by X-ray crystallography. Since the starting materials are readily accessible, the calixquinones become easily available compounds for further study.     

Synthesis of Calix[4]arene-Based Thiourea Derivatives for Extraction of Toxic Dichromate and Arsenate Ions

In the environment, the presence of toxic oxyanions such as Cr(VI) and As(V), especially in drinking water, creates serious hazards to human health. For efficient and selective detection of these species; novel calix[4]arene-based thiourea derivatives which obtained using p-tert-butylcalix[4]arene as starting material have been prepared from m-aniline or o-aniline or o-aminophenol in moderate yield. The structures of all new synthesized compounds obtained from these reactions were determined by using FTIR, ¹H, and ¹³C NMR spectroscopy. The complexing properties of calix[4]arene-based thiourea derivatives have been studied towards the As(V) and Cr(VI). It was found that calix[4]arene-based thiourea derivative 5,11,17,23-tetra-tert-butyl-25,27-bis(o-amino-phenylthioureido propoxy)-26,28-hydroxycalix[4]arene is an effective extractant for carrying HCr₂O₇^2? anions.     

Selective Complexation and Membrane Transport of Guanidinium Salts by Calix[6]arene Amides

The p-tert-butylcalix[6]arene hexamide 2 and syn-1,3,5–trimethoxy-2,4,6-triamide 4 were synthesized by reaction of α-chloro-N,N-diethylacetamide and the corresponding calix[6]arenes 1 and 3 , respectively. ¹H NMR spectroscopy shows that 2 is a mixture of different conformations whereas 4 is fixed in a cone conformation. Extraction experiments, (S-L) and (H₂O–CDCl₃) with picrate salts, indicate that 2 complexes both alkali metal (1:2 complex) and guanidinium salts (1:1 complex) but 4 complexes only guanidinium (1:1 complex). Incorporated in supported liquid membranes (Accurel^® / o-nitrophenyl n-octyl ether) the calixarenes 2 and 4 transport guanidinium salts. The hexamide 2 is a more efficient carrier of guanidinium but the syn-1,3,5-trimethoxy-2,4,6-triamide 4 is much more selective. Both 2 and 4 are sufficiently lipophilic to give membranes that are stable over longer periods (weeks).     

Electrochemical oxidation of <Emphasis Type="Italic">p</Emphasis>-sulfonated calix[8]arene

The water-soluble p-sulfonated sodium salt of calix[8]arene (III) was synthesized. The product was characterized by FT-IR, NMR and UV–Vis spectra.Then the electrochemical behaviors of p-sulfonated sodium salt of calix[8]arene in NaAc+HAc (pH = 4) buffer solution was studied. In aqueous solution, p-sulfonated calix[8]arene can be oxidized when the potential is more than 0.7 V vs SCE. It was confirmed that the reaction was a two-electron irreversible electrochemical reaction. The transfer coefficient, α, was measured as 0.7. At 25°, the diffusion coefficient of p-sulfonated calix[8]arene was determined as 8.6 × 10⁻⁷ cm² s⁻¹. The diffusion activation energy of p-sulfonated calix[8]arene was 18.9 kJ mol⁻¹ at pH = 4.     

Synthesis and characterization of calix[4]arene-based copolyethers and polyurethanes. Ionophoric properties and extraction abilities towards metal cations of polymeric calix[4]arene urethanes

Copolyethers and polyurethanes containing lower and upper rim calix[4]arene units in the fixed cone conformation were prepared in good yield by polycondensation reactions of distal calix[4]arene diols with bisphenol-A/dibromomethane and 2,4-tolylendiisocyanate (TDI), respectively. In a similar way were prepared calix[4]arene-crown-5 and -crown-6 polyurethanes in the fixed 1,3-alternate conformation by condensation of TDI with lower rim calixcrown-5 and calixcrown-6 diols. However, the poor solubility in common organic solvents of the copolyether derivatives (M_w=11,100-11,600 g/mol) hampered further studies on their ionophoric properties. Aiming to obtain model compounds for the investigation of both extraction abilities and ionophoric properties of the polyurethane materials, several bis-urethanes were also synthesized by reaction of the calix[4]arene diols with p-tolylisocyanate (TI). The extraction ability measurements of monomeric and polymeric calix[4]arene urethanes (M_w=12,300-83,500 g/mol) towards alkali metal cations (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺) and Ag⁺showed a remarkable efficiency and selectivity of calixcrown-6 polyurethane toward Rb⁺, Cs⁺and Ag⁺.     

Syntheses of inherently chiral monosulfinyltrithiacalix[4]arenes by the oxidation of one of the bridging sulfurs of a tetrathiacalix[4]arene fixed in the 1,3-alternate conformation

A new synthetic strategy for the construction of an inherently chiral, sulfur-bridged calix[4]arene molecular framework was presented by oxidation of one of the four epithio bonds of a tetrathiacalix[4]arene derivative of 1,3-alternate conformation: Tetra(carboxymethyl) ether of p-tert-butyltetrathiacalix[4]arene of 1,3-alternate conformation ( 7 ) was converted to the tetra(l-menthoxycarbonylmethyl) ether ( 8 ). Oxidation of the tetra l-menthyl ester 8 by treatment with NaBO₃ (1.1 molar equiv.) afforded a pair of diastereomers of the monosulfinyl derivatives ( 9 ) in 58% yield, which were readily separable by silica-gel column chromatography. Removal of the l-menthyl moieties followed by methyl esterification gave enantiomerically pure samples of inherently chiral (-)- and (+)-monosulfinyltrithiacalix[4]arene derivatives ((-) -10 and (+) -10 ) in 62 and 56% yield, respectively.     

Extraction of Pb2+ with p-tert-butylcalix [4]-, [5]-, [6]Arene Carboxylic Acid Ligands and their Monomeric Counterpart: A Thermodynamic Approach

Studies on extraction equilibrium constants at different temperatures and thermodynamic parameters of solvent extraction of Pb²⁺ ion with carboxylic acid derivatives of different ring size calixarenes and structure related monomeric compound have been carried out. The extraction equilibrium constants corresponding to calix[n]arene (n?=?4, 5, 6) derivatives decrease in the order [5]arene > [6]arene > [4]arene. In all cases, the complexation process is primarily enthalpy driven. The favorable enthalpic contribution for extraction of Pb²⁺ is in the order hexamer ≈ monomer > tetramer > pentamer. However, the unfavorable entropic loss follows the order: monomer > hexamer > tetramer > pentamer. Overall stability of the host-guest complex is the function of entropy-enthalpy compensation and the free energy of complexation is minimum for the pentamer, followed by tetramer ≈ hexamer and monomer. Although the carboxylic acid derivative of calix[4]arene is more preorganized than the calix[5]arene derivative, extraction of Pb²⁺ ion with the tetramer passes through greater entropic loss than that with the pentamer and the degree of preorganization of calix[4]arene derivative is far from perfect for the complexation and extraction of Pb²⁺ ion. As compared to tetrameric and hexameric counterparts, the structural features of the carboxylic acid derivative of calix[5]arene prior to complexation contribute much to interact with the Pb²⁺ ion and form a thermodynamically stable complex. Supplementary materials are available for this article. Go to the publisher's online edition of Solvent Extraction and Ion Exchange to view the supplemental file.     

Thermal Behaviors of Bisazocalix[4]arene Derivatives

In this article, calix[4]arene (4) was prepared by debutylation and hydrolyses reacting from 25,27-dibenzoyl-26,28-dihydroxy-5,11,17,23-tetra(tert-butyl)calix[4]arene (2). Azocalix[4]arenes (6a-c) were coupled by linking 4-methoxy, 4-ethyl, and 4-nitroaniline to calix[4]arene (4) through a diazo-coupling reaction. Thermal behavior characteristics and decomposition routes of 25,26,27,28-tetrahydroxy-11,23-di(tert-butyl)-5,17-(p-substitue phenyl)azocalix[4]arene (6a-c) were investigated in air atmosphere by means of thermogravimetry (TG), differential thermogravimetry (DTG), and differential thermal analysis (DTA) analyses. It was found that the decomposition of all compounds complete with two exothermic stages which corresponded to removal of substitute groups (methoxy-, ethyl-, nitro-) and second stage rest of structure decomposition.     

Synthesis,extraction, and adsorption properties of calix[4]arene‐poly(ethylene‐glycol) crosslinked polymer

Novel calix[4]arene‐poly(ethylene glycol) crosslinked polymer (CCP) has been synthesized by the polycondensation reaction between a p‐tert‐butylcalix[4]arene derivative and dihydroxyl capped poly(ethylene glycol) (DHPEG, M_n = 1000) catalyzed by neodymium tosylate. The hydrogel, consisted of 66.9% water and 33.1% CCP, can selectively extract aromatic organic molecules from aqueous solution according to the diameter of the guest molecules, which infers that the diameter of the calix[4]arene cavity is about 5.4 Å and the conformation of calix[4]arene units altered from cone conformation to 1,3‐alternate conformation during the polycondensation reaction. Furthermore, CCP can also adsorb naphthalene from gas phase, showing much higher capacity than active carbon does, which may have some potential applications in the field of separation and environment protection. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Feasibility Studies on Palladium Extraction from Leach Liquors of Automotive Catalysts Using p-Diethylphosphonomethylthiacalix[6]arene

Feasibility studies for the recovery of Pd(II) from leach liquors of automotive catalysts using p-diethylphosphonomethylthiacalix[6]arene (1) and p-tert-butylthiacalix[6]arene (2) were conducted. Compound 1 was found to be a more efficient extractant than 2 for Pd(II) ions, indicating selective extraction of Pd(II) ions [E% = 98.4%] from the leach liquors. The majority of other metal ions present in the leached solution were not extracted except Zr(IV) ions [E% = 22%]. Stripping of the Pd(II) ions from the extractants was performed using acidic thiourea, thereby enabling the recycling of the extractants.     

Mass transfer kinetics of neodymium(III) extraction by calix[4]arene carboxylic acid using a constant interfacial area cell with laminar flow

BACKGROUND: Thermodynamics and kinetics data are both important to explain the extraction property. In order to develop a novel separation technology superior to current extraction systems, many promising extractants have been developed including calixarene carboxylic acids. The extraction thermodynamics behavior of calix[4]arene carboxylic acids has been reported extensively. In this study, the mass transfer kinetics of neodymium(III) and the interfacial behavior of calix[4]arene carboxylic acid were investigated. RESULTS: The rate constant (K_ao) becomes constant when the stirring speed was controlled between 250 rpm and 400 rpm. The activation energy (E_a) was calculated to be 21·41 kJ mol^?1 or 88·17 kJ mol^?1 (dependent on temperature) from the slope of log K_ao against 1000/T. The linear relationship between the specific area and the extraction rate is the characteristic of an interfacial reaction control. The minimum bulk concentration of the extractant necessary to saturate the interface (C_min) is lower than 4·19 × 10^?4 mol L^?1. CONCLUSION: The effect of stirring speed, temperature, and species concentration on the extraction rate demonstrates that the extraction regime depends on the extraction conditions. The chemical reaction control governs the extraction regime at temperatures below 303 K and a mixed control regime occurs when the temperature is between 303 K and 318 K. The probable locale for the chemical reaction is at the liquid–liquid interface and the rate equation is deduced to be: ? d[Nd³⁺]_(a)/dt = k_f[Nd³⁺]_(a)[H₄A]_(o)^0·727[H⁺]_(a)^?0·978. The rate‐controlling step was suggested by the analysis of the experimental results. Copyright © 2008 Society of Chemical Industry     

Liquid–Liquid Extraction of Alkali Metal Cations by Calix[4]crowns with Pendant Groups

Abstract

The selective liquid–liquid extraction of alkali metal cations from the aqueous phase to the organic phase was carried out by using calix[4]crowns bearing two pendant groups with donor sites. It was found that calix[4]crown‐4 and calix[4]crown‐5 extractants with two pendant groups exhibit higher extraction efficiency than the parent compounds and possess obvious selectivity for Na⁺ and K⁺, respectively.     

New polyisobutylene stars XI. Synthesis and characterization of allyl-telechelic octa-arm polyisobutylene stars

The synthesis and characterization of a novel star comprising eight allyl-terminated polyisobutylene (PIB) arms radiating from a calix[8]arene core is described. The synthesis was accomplished by a core-first method, by inducing the living polymerization of isobutylene (IB) by a suitably functionalized calix[8]arene initiator (1) in conjunction with BCl₃-TiCl₄ coinitiators, and terminating the growth of the living PIB^⊕ arms by allyltrimethylsilane. The relative concentrations of BCl₃ and TiCl₄ are critical for the synthesis of well-defined 8-arm stars. Characterization of the products (which included triple detector GPC studies and ¹H NMR spectroscopy) indicated quantitative allylation. A mechanism which summarizes the experimental observations is proposed. Received: 17 July 1997/Revised version: 11 September 1997/Accepted: 19 September 1997     

Removal of Dichromate Anions with Nanofiltration‐Complexation by using Amino Calix[4]arene Derivative

Abstract

Herein the removal and recovery of chromium anions from aqueous solutions by using nanofiltration pilot‐scale equipment (Osmonics Sepa CF Membrane Cell) with a water‐soluble amino calix[4]arene derivative was studied. To understand the selectivity, the authors also examined the retention of chromium anions in the presence of Cl^?, NO₃ ^?, SO₄ ^2?, HSO₄ ^?, CO₃ ^2?, PO₄ ^3?, H₂PO₄ ^? anions in nanofiltration‐complexation. From the results water‐soluble amino calix[4]arene was effective and selective ligand for dichromate anions over nitrate anions, in a nanofiltration‐complexation system at pH 2.5. Moreover, the recovery and reusability studies of dichromate and nitrate anions and also ligand were performed.     

Molecular composites obtained by polyaniline synthesis in the presence of p‐octasulfonated calixarene macrocycle

Polyaniline (PANI) molecular composites were synthesized by chemical oxidative polymerization of the aniline and aniline dimer, N‐phenyl‐1,4‐phenylendiamine, in the presence of a macrocycle, calix[8]arene p‐octasulfonic acid (C8S), using ammonium peroxidisulfate as oxidant. The macrocycle has acted both as acid dopant and surfactant to obtain processable PANI‐ES. The PANI/calix[8]arene p‐octasulfonic acid composite was also obtained by a simple doping of PANI emeraldine base form with calix[8]arene sulfonic acid. The structure of materials was confirmed by Fourier transform infrared, UV–vis and nuclear magnetic resonance spectroscopy. All synthesized composite materials are amorphous and soluble in chloroform, dimethylsulfoxide, NMP, showing excellent solution‐processing properties combined with electrical conductivity. Cyclic voltammetry evidenced a good electroactivity for the composite films. Dielectric properties (dielectric constant and dielectric losses) were determined and are comparable with those of other PANI/ionic acid polymer composites. Preliminary studies have evidenced a high dielectric constant (10⁴ at 100 Hz) and electrical conductivity of 6 × 10^?3 S/cm for PANI composites. From sulfur elemental analysis of the PANI/calixarene, it results that the content in macrocycle is ～30% (weight). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

A useful approach toward the synthesis and metal extractions with polymer appended thioalkyl calix[4]arenes

This article describes a convenient method for the synthesis of two new polymeric resins via nucleophilic substitution reactions involving 5,11,17,23-tetrakis[(propylthio)methyl]-25,26,27,28-tetrahydroxycalix[4]arene 4, and 5,11,17,23-tetrakis[(methylthio)methyl]-25,26,27,28-tetrahydroxycalix[4]arene 6, as precursors with Merrifield's resin. The extraction studies were made using both liquid-liquid extraction and solid-liquid batchwise sorption procedures. The calix[4]arene based polymeric resins have high extraction ability toward metal cations and Na₂Cr₂O₇ as compared to their monomeric precursors.     

A MnII5 tetragonal pyramid stabilized by p-tert-butylcalix[8]arene: Synthesis,structure and magnetic property

A compound, [Mn₅(H₄C8A)(OH)₂(C₃H₆NO₂)(DMF)₅(CH₃O)_1.5(HCO₂) (C₂H₃O₂)_0.5]·2DMF·CH₃OH (1) (H₈C8A = p-tert-butylcalix[8]arene, DMF = N,N′-dimethylformamide), was synthesized by the solvothermal method in the mixed CH₃OH/DMF (1:1) solvent. Compound 1 is featured with a tetragonal pyramid-like Mn^II₅ cluster encircled within a calix[8]arene molecule with a ‘pleated loop’ conformation. Magnetic study indicates that the Mn^II centers exhibit antiferromagnetic interactions.     

Chiral Calix[4]arenes-Bearing Prolinamide Functionality as Organocatalyst for Asymmetric Direct Aldol Reactions in Water

The chiral calix[4]arene derivative (6) bearing an L-prolinamido group has been designed and proved to be a water compatible efficient organocatalysts for a direct enantioselective aldol reaction. Compound 6 catalyzes the aldol reaction of cyclohexanone and a variety of aromatic aldehydes yielding anti-aldol products in high yield with enantioselectivities of up to 93% and diastereoselectivity of up to 95:5.     

Co-polymerization of propylene oxide and CO2 using early transition metal (groups IV and V) metallocalix[n]arenes (n = 4, 6, 8)

A number of metallocalix[n]arenes, where n = 4, 6, or 8, of titanium and vanadium have been screened for their ability to act as catalysts for the co-polymerization of propylene oxide and CO₂ to form cyclic/polycarbonates. The vanadium-containing catalysts, namely [VO(L¹Me)] (1), [(VO₂)L²H₆] (2), [Na(NCMe)₆]₂[(Na[VO]₄L²)(Na(NCMe))₃]₂ (3), [VO(μ-OH)L^3/H₂]₂∙6CH₂Cl₂ (4), {[VO]₂(μ-O)L⁴[Na(NCMe)₂]₂} (5), {[V(Np-tolyl)]₂L⁴} (6) and [V(Np-RC₆H₄)Cl₃] (R = Cl (7), OMe (8), CF₃ (9)), where L¹H₃ = methylether-p-tert-butylcalix[4]areneH₃, L²H₈ = p-tert-butylcalix[8]areneH₈, L³H₄ = p-tert-butylthiacalix[4]areneH₄, L⁴H₆ = p-tert-butyltetrahomodioxacalix[6]areneH₆, performed poorly, affording, in the majority of cases, TONs less than 1 at 90°C over 6 h and low molecular weight oligomeric products (M_n ≤ 1665). In the case of the titanocalix[8]arenes, {(TiX)₂[TiX(NCMe)]₂(μ₃-O)₂(L²)} (X = Cl (10), Br (11), I (12)), which all adopt a similar, ladder-type structure, the activity under the same conditions is somewhat higher (TONs >6) and follows the trend Cl > Br > I; by comparison the non-calixarene species [TiCl₄(THF)₂] was virtually inactive. In the case of 10, it was observed that the use of PPNCl (bis[triphenylphosphine]iminium chloride) as co-catalyst significantly improved both the polymer yield and molecular weight (M_n 3515). The molecular structures of the complexes [HNEt₃]₂[VO(μ-O)L³H₂]₂∙3CH₂Cl₂ (4∙3CH₂Cl₂), [VO(μ-OH)L^3/H₂]₂∙6CH₂Cl₂ (4^/) (where L^3/H₂ is a partially oxidized form of L³H₄) and {(TiCl)₂[TiCl(NCMe)]₂(μ₃-O)₂(L²)}·6.5MeCN (10·6.5MeCN) are reported.     

Solvent Extraction of U(VI) by Calix[6]arenes

Abstract

This paper focuses on the solvent extraction of U(VI) traces by 1,3,5‐OMe‐2,4,6‐OCH₂CONHOH‐p‐tert‐butylcalix[6]arene (LH₃). The global extraction equation of U(VI) has been established. The complex formed in the organic phase is (UO₂)(LH) with an apparent extraction constant equal to 7.1×10^?5 M (I=0.04 M). Distribution data show that LH₃ efficiently extracts U(VI) from NaNO₃ media at pH 5 and that the stripping of U(VI) can be achieved in nitric acid solutions. Finally a comparison with previous results obtained with the 1,3,5‐OMe‐2,4,6‐OCH₂COOH‐p‐tert‐butylcalix[6]arene (L′H₃) shows that the hydroxamate groups are as efficient as the carboxylate ones for uranyl extraction.