Equilibrium,Thermodynamic, and Kinetic Studies on Trichoderma viride Biomass as Biosorbent for the Removal of Cu(II) from Water

Equilibrium, thermodynamic, and kinetic studies on the biosorption of Cu(II) using biomass, Trichoderma viride were carried out. The biosorbent was characterized by Fourier transform infrared spectroscopy and Scanning Electron Microscopy. The Langmuir and Freundlich isotherm models were applied to describe the biosorption process. The influence of pH, the biomass dosage, the contact time, the initial metal ion concentration, and the temperature of the solution on the biosorption was studied. The maximum Cu(II) biosorption was attained at pH 5. The equilibrium data were better fit by the Langmuir isotherm model than by the Freundlich isotherm. The maximum biosorption capacity of T. viride biomass was found to be 19.6 mg/g for Cu(II). The kinetic studies indicated that the biosorption of Cu(II) followed the pseudo-second-order model. The calculated thermodynamic parameters, Gibbs-free energy (ΔG^o), enthalpy (ΔH^o), and entropy (ΔS^o) showed that the biosorption of Cu(II) onto T. viride biomass was spontaneous and endothermic. It can be concluded that the T. viride biomass has the potential as an effective and low-cost biosorbent for Cu(II) removal from aqueous solutions.     

Biosorption of Zinc from Aqueous Solutions by Rice Bran: Kinetics and Equilibrium Studies

Abstract

Rice bran, an agricultural by‐product, was used for the removal of zinc ions from aqueous solution. The work considered the determination of zinc‐biomass equilibrium data in batch system. These studies were carried out in order to determine some operational parameters of zinc sorption such as the time required for the Zinc‐biosorbent equilibrium, the effects of biomass particle size, pH, and temperature. The results showed that pH has an importance effect on zinc biosorption capacity. The biosorbent size also affects the zinc biosorption capacity. The sorption process follows pseudo‐second‐order kinetics. The intraparticle diffusion may be the rate‐controlling step involved in the adsorption zinc ions onto the rice bran up to 30 min. The equilibrium data could be best fitted by the Langmuir sorption isotherm equation over the entire concentration range (40–160 mg/dm³). Thermodynamic parameters, such as ΔG°, ΔH°, ΔS°, have been calculated. The thermodynamics of zinc ion/rice bran system indicate spontaneous and endothermic nature of the process.     

Biosorption of a Basic Dye from Aqueous Solutions by Euphorbia rigida

Abstract

In this study, the biosorption of Basic Blue 9 (BB9) dye from aqueous solutions onto a biomass of Euphorbia rigida was examined by means of the initial biosorbate concentration, biosorbent amount, particle size, and pH. Biosorption of BB9 onto E. rigida increases with both the initial biosorbate concentration and biosorbent amount, whereas decreases with the increasing particle size. The experimental data indicated that the biosorption isotherms are well‐described by the Langmuir equilibrium isotherm equation at 20, 30, and 40°C. Maximum biosorption capacity was 3.28×10^?4 mol g^?1 at 40°C. The biosorption kinetics of BB9 obeys the pseudo‐second‐order kinetic model. The thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated to estimate the nature of biosorption. These experimental results have indicated that E. rigida has the potential to act as a biosorbent for the removal of Basic Blue 9 from aqueous solutions.     

Removal of nickel from aqueous solutions by citric acid modified Ceiba pentandra hulls: Equilibrium and kinetic studies

The removal of Ni(II) from aqueous solutions using biomass prepared from Ceiba pentandra hulls powder modified with citric acid treatment (CAMCPH) has been studied by batch method. The biosorbent was characterised before and after citric acid modification using SEM, FT‐IR and XRD. Experimental parameters that influence the biosorption of Ni(II), such as pH, biosorbent dose, contact time and initial concentration of metal ion have been investigated. The adsorption of Ni(II) increased with increase in contact time and reached equilibrium within 50 min. The maximum removal of Ni(II) was observed at pH 5.0. The kinetic data were analysed using three adsorption kinetic models: the pseudo‐first, second‐order kinetics and intra‐particle diffusion. The results showed that the pseudo‐second‐order model fits the experimental data very well. The equilibrium data were analysed using Langmuir, Freundlich and Dubinin–Radushkevich isotherm models. Langmuir model provided the best correlation for the adsorption of Ni(II) by CAMCPH and the monolayer biosorption capacity for Ni(II) removal was 34.34 mg/g. Desorption experiments were carried out using HCl solution and the recovery of the metal ion from CAMCPH was found 98%. Desorption experiments showed the feasibility of regeneration of the biosorbent for further use after treating with dilute HCl. © 2011 Canadian Society for Chemical Engineering     

Biosorption potential of the mediterranean plant (Posidonia oceanica) for the removal of Cu2+ ions from aqueous media : Equilibrium,kinetic, thermodynamic and mechanism analysis

The biosorption characteristics of copper(II) ions using Posidonia oceanica biomass were investigated. Experimental parameters affecting the biosorption process such as pH level, contact time, biosorbent dosage and temperature were studied. The equilibrium data were applied to the Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherm models. The Langmuir model fitted very well the equilibrium data, and the maximum uptake of Cu(II) by Posidonia oceanica was found to be 76.92 mg/g. The mean free energy E (10.78 kJ/mol) from the D-R isotherm indicated a chemical ion-exchange mechanism. Kinetic results showed that the pseudo-second-order kinetic model was well fitted to the experimental data. Thermodynamic parameters depicted the exothermic nature of biosorption and the process was feasible and spontaneous. The results of FTIR (Fourier-transform infrared spectroscopy) revealed that carboxyl, amine, and hydroxyl groups on the biomass surface were involved in the biosorption of Cu(II) ions.     

Biosorption of chromium onto Erythrina Variegata Orientalis leaf powder

The biosorption of chromium from an aqueous solution onto Erythrina Variegata Orientalis leaf powder was investigated in batch operations. The equilibrium agitation time was 180 min. The extent of chromium biosorption increased from 74.2% to 86.4% with decrease in biosorbent size from 150 to 45 μm for a dosage of 30 g/L. The biosorption decreased from 99.1 (0.45 mg/g) to 45.5% (1.64 mg/g) with an increase in chromium initial concentration (C _o ) from 22.5 to 180 mg/L. The extent of biosorption was maximum at pH=3. The experimental data were well explained by Langmuir and Redlich-Peterson isotherm models. The biosorption data followed second-order kinetics with a rate constant of 0.078 g/mg-min for 50 g/L of 45 μm size biosorbent. The biosorption was exothermic and feasible. The biosorption was tending towards irreversibility with increasing temperature.     

Biosorption of methylene blue from aqueous solution by softstem bulrush (Scirpus tabernaemontani Gmel.)

BACKGROUND: The removal of methylene blue from aqueous solution was studied using softstem bulrush (Scirpus tabernaemontani Gmel.) as the biosorbent. The effects of various parameters including contact time, biosorbent dosage, ionic strength and solution pH on the biosorption were investigated. RESULTS: The sorption capacity increased with an increase in biosorbent dosage and a decrease in ionic strength. The equilibrium time was found to be 240 min for full equilibration. Pseudo‐first‐order, pseudo‐second‐order, Bangham equation and intraparticle diffusion models were applied to fit the kinetic data, and the results showed that the sorption process followed the pseudo‐second‐order model. Equilibrium data conformed to Langmuir and Redlich–Peterson isotherm models, with a maximum monolayer biosorption capacity of 53.8 mg g^?1 for the Langmuir isotherm at 18 °C. The value of ΔG was estimated to be ? 29.24 kJ mol^?1, indicating the spontaneous nature of the biosorption. The biosorption process was strongly pH‐dependent and favourable at alkaline pH. CONCLUSION: Softstem bulrush, which is readily available and inexpensive, could be employed as a promising biosorbent for the removal of dye. Copyright © 2008 Society of Chemical Industry     

Pecan Nutshell as Biosorbent to Remove Toxic Metals from Aqueous Solution

Abstract

In the present study we reported for the first time, the feasibility of pecan nutshell (PNS-Carya illinoensis) as an alternative biosorbent to remove Cr(III), Fe(III) and Zn(II) metallic ions from aqueous solutions. The ability of PNS to remove these metallic ions was investigated by using batch biosorption procedure. The effects, such as pH and the biosorbent dosage on the adsorption capacities of PNS were studied. Five kinetic models were tested, the adsorption kinetics being the better fitted one to the fractionary-order kinetic model.

The equilibrium data were fitted to Langmuir, Freundlich, Sips, and Redlich-Peterson isotherm models. Taking into account a statistical error function, the data were best fitted to Sips isotherm models. The maximum biosorption capacity of PNS were 93.01, 76.59, and 107.9 mg g^?1 for Cr(III), Fe(III), and Zn(II), respectively.     

Biosorption of Direct Red 28 (Congo Red) from Aqueous Solutions by Eggshells: Batch and Column Studies

The feasibility of using eggshells as a low-cost biosorbent for the removal of Direct Red 28 (DR 28) from aqueous solutions was studied in batch and dynamic flow modes of operation. The effect of biosorption process variables such as particle size, solution pH, initial dye concentration, contact time, temperature, feed flow rate, and bed height were investigated. Both the Langmuir and Freundlich isotherm models exhibited excellent fit to the equilibrium biosorption data. Optimum pH (6.0), particle size (<250 µm), initial dye concentration (50 mg g^?1), temperature (313 K), and contact time (240 min) gave maximum monolayer biosorption capacity of 69.45 mg g^?1 which was higher than those of many sorbent materials. Pseudo-second-order kinetic model depicted the biosorption kinetics accurately. Thermodynamic study confirmed the spontaneous and endothermic nature of the biosorption process. Breakthrough time increased with increase in the bed height but decreased with increase in flow rate. Overall, batch and continuous mode data suggest the applicability of eggshells as an environment friendly and efficient biosorbent for removal of DR 28 from aqueous media.     

Removal of Cu(II) and Fe(III) from aqueous solutions by dead sulfate reducing bacteria

The biosorption properties of dead sulfate reducing bacteria (SRB) for the removal of Cu(II) and Fe(III) from aqueous solutions was studied. The effects of the biosorbent concentration, the initial pH value and the temperature on the biosorption of Cu(II) and Fe(III) by the SRB were investigated. FTIR analysis verified that the hydroxyl, carbonyl and amine functional groups of the SRB biosorbent were involved in the biosorption process. For both Cu(II) and Fe(III), an increase in the SRB biosorbent concentration resulted in an increase in the removal percentage but a decrease in the amount of specific metal biosorption. The maximum specific metal biosorption was 93.25 mg?g^–1 at pH 4.5 for Cu(II) and 88.29 mg?g^–1 at pH 3.5 for Fe(III). The temperature did not have a significant effect on biosorption. In a binary metal system, the specific biosorption capacity for the target metal decreased when another metal ion was added. For both the single metal and binary metal systems, the biosorption of Cu(II) and Fe(III) onto a SRB biosorbent was better represented by a Langmuir model than by a Freundlich model.     

Removal of Copper(II) and Zinc(II) from Aqueous Solutions Using a Lignocellulosic-Based Polymeric Adsorbent Containing Amidoxime Chelating Functional Groups

In this study, the adsorption of Cu(II) and Zn(II) ions from aqueous solutions onto amidoximated polymerized banana stem (APBS) has been investigated. Infrared spectroscopy was used to confirm graft copolymer formation and amidoxime functionalization. The different variables affecting the sorption capacity such as pH of the solution, adsorption time, initial metal ion concentration, and temperature have been investigated. The optimum pH for maximum adsorption was 10.5 (99.99%) for Zn²⁺ and 6.0 (99.0%) for Cu²⁺ at an initial concentration of 10 mg L^?1. Equilibrium was achieved approximately within 3 h. The experimental kinetic data were analyzed using pseudo-first-order and pseudo-second-order kinetic models and are well fitted with pseudo- second-order kinetics. The thermodynamic activation parameters such as ΔG^o, ΔH^o, and ΔS^o were determined to predict the nature of adsorption. The temperature dependence indicates an exothermic process. The experimental isotherm data were well fitted to the Langmuir model with maximum adsorption capacities of 42.32 and 85.89 mg g^?1 for Cu(II) and Zn(II), respectively, at 20°C. The adsorption efficiency was tested using industrial effluents. Repeated adsorption/regeneration cycles show the feasibility of the APBS for the removal of Cu(II) and Zn(II) ions from water and industrial effluents.     

Removal of Cu(II) and Zn(II) Using Lignocellulosic Fiber Derived from Citrus reticulata (Kinnow) Waste Biomass

Abstract

The biosorption of Cu(II) and Zn(II) using dried untreated and pretreated Citrus reticulata waste biomass were evaluated. The Cu(II) and Zn(II) sorption were found to be dependent on the solution pH, the biosorbent dose, the biosorbent particle size, the shaking speed, the temperature, the initial metal ions (800 mg/L), and the contact time. Twenty-eight physical and chemical pretreatments of Citrus reticulata waste biomass were evaluated for the sorption of Cu(II) and Zn(II) from aqueous solutions. The results indicated that biomass pretreated with sulphuric acid and EDTA had maximum Cu(II) and Zn(II) uptake capacity of 87.14 mg/g and 86.4 mg/g respectively. Moreover, the Langmuir isotherm model fitted well than the Freundlich model with R ² > 0.95 for both metal ions. The sorption of Cu(II) and Zn(II) occurred rapidly in the first 120 min and the equilibrium was reached in 240 min. FTIR and SEM studies were also carried out to investigate functional groups present in the biomass and the surface morphological changes of biomass.     

Equilibrium,Thermodynamic and Kinetic Studies on Biosorption of Mercury from Aqueous Solution by Macrofungus (Lycoperdon perlatum) Biomass

The present research is to investigate the possibility of macrofungus Lycoperdon perlatum biomass, which is an easily available, renewable plant, low-cost, as a new biomass for the removal of mercury (Hg(II)) ions from aqueous solutions. The effects of various parameters like pH of solution, biomass concentration, contact time, and temperature were studied by the using the batch method. The Langmuir model adequately described the equilibrium data. The biosorption capacity of the biomass was found to be 107.4 mg · g^?1 at pH 6. The mean free energy value (10.9 kJ · mol^?1) obtained from the D–R model indicated that the biosorption of Hg(II) onto fungal biomass was taken place via chemical ion-exchange. Thermodynamic parameters showed that the biosorption of Hg(II) onto L. perlatum biomass was feasible, spontaneous, and exothermic in nature. The kinetic results showed that the biosorption of Hg(II) onto fungal biomass followed second-order kinetics. This work also shows that L. perlatum biomass can be an alternative to the expensive materials like ion exchange resins and activated carbon for the treatment of water and wastewater containing mercury ions due to its ability of selectivity and higher biosorption capacity and also being low cost material.     

Adsorption behaviors of crystal violet from aqueous solution using Anatolian black pine (Pinus nigra Arnold.): kinetic and equilibrium studies

ABSTRACT

In this study, Anatolian black pine (ABP, Pinus nigra Arnold.) was evaluated as biosorbent for removal of crystal violet (CV) from aqueous solution. The influence of operational parameters including solution pH, initial CV concentration, biosorbent dosage, contact time, and temperature were studied in batch systems. The adsorption data followed well Langmuir isotherm with a maximum biosorption capacity of 12.36 mg/g. The equilibrium data were better fitted with pseudo-second-order kinetic model (R² ? 0.99). Moreover, the thermodynamic parameters indicated that the CV biosorption was feasible, spontaneous, and endothermic process. This study showed that ABP (Pinus nigra Arnold.) can be used to remove CV from aqueous solutions.     

BIOSORPTION STUDIES ON NACL-MODIFIED CERATOPHYLLUM DEMERSUM: REMOVAL OF TOXIC CHROMIUM FROM AQUEOUS SOLUTION

The present research provides information on the Cr(VI) removal potential of NaCl-modified Ceratophyllum demersum, an aquatic plant biomass. The effects of various parameters including pH, biomass dosage, contact time, and initial concentration on Cr(VI) biosorption were investigated. The best conditions for Cr(VI) biosorption in the present study were: pH of 2, biosorbent dose of 8 g/L, and contact time of 60 min. Under these conditions, maximum adsorption capacity of modified C. demersum for Cr(VI) was 10.20 mg/g. The experimental biosorption data were modeled by Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherms. The biosorption process followed the Langmuir isotherm model with a high coefficient of determination (R² > 0.99). The biosorption process followed pseudo-second-order kinetics. Further, the biosorbent was characterized by Fourier transform-infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). The results showed that biosorption of Cr(VI) on NaCl-modified C. demersum occurred through chemical sorption.     

Equilibrium,kinetic and isotherm of some metal ion biosorption

Trichoderma reesei was used as a biosorbent for the removal of Co²⁺, Cu²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ ions. The influence of factors such as pH, mass of biomass, contact time and temperature on biosorption efficiency was optimized. To calculate the isotherm parameters for the biosorption of Co²⁺, Cu²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ ions at optimized conditions, the experimental equilibrium data were fitted to Langmuir and Freundlich models. The calculated thermodynamic parameters, ΔG°, ΔH° and ΔS° showed that the biosorption of Co²⁺, Cu²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ ions onto T. reesei biomass was feasible, spontaneous and endothermic at the optimized conditions. The results of kinetic analysis showed that the biosorption of the selected metal ions onto T. reesei biomass obeys pseudo second order kinetics.     

Efficient biosorption of a reactive dye from contaminated media by Neurospora sitophila cells—Zea mays silk tissue biomass system

BACKGROUND: A filamentous fungus Neurospora sitophila was immobilized in Zea mays silk tissue and the prepared system was employed as a new biosorbent for the treatment of reactive dye contaminated solutions. RESULTS: Decolorization potential of the biosorbent system was investigated in batch and continuous mode operations. Design parameters such as pH, biomass dosage, contact time, temperature, dye concentration and flow rate were investigated. Batch mode equilibrium data were analyzed kinetically to determine the rate constants. The process followed the pseudo‐second‐order kinetic model. The thermodynamics of the biosorption indicated the spontaneous and endothermic nature of the process. Biosorption was well described by the Langmuir isotherm model, with a maximum monolayer biosorption capacity of 105.33 mg g^?1. Relatively good dynamic flow decolorization potential was observed for the biosorbent system in synthetic and real wastewater conditions. Flow mode regeneration studies over ten consecutive cycles indicated that the suggested biosorbent maintained consistently high biosorption yield, above 70%. The possible dye‐biosorbent interaction mechanism was also confirmed by zeta potential, FTIR, SEM and EDX analysis. CONCLUSION: High biosorption capacity and regeneration potential suggest that the new biosorbent system can be used as an alternative and low‐cost biomaterial for the treatment of reactive dye contaminated solutions. Copyright © 2011 Society of Chemical Industry     

Biosorption of Zinc on Palm Tree Leaves: Equilibrium,Kinetics, and Thermodynamics Studies

Abstract

The efficiency of using palm tree leaves to remove zinc ions from aqueous solution was studied. Adsorption isotherms, kinetics, and thermodynamics studies were conducted. The influence of different experimental parameters, such as equilibrium pH, shaking rate, temperature, and the presence of other pollutants such as chelating agents on the biosorption of zinc on palm tree leaves was investigated.

Batch biosorption experiments showed that palm tree leaves used in this study proved to be suitable for the removal of zinc from dilute solutions where a maximum uptake capacity of 14.7 mg/g was obtained at 25°C. Zinc biosorption on palm tree leaves was found to be highly pH dependent. The biosorption process was found to be rapid with 90% of the adsorption completed in about 10 min. Dynamics studies of the biosorption of zinc on palm tree leaves showed that the biosorption process followed the pseudo second‐order kinetics with little intraparticle diffusion mechanism contribution. The equilibrium results indicated that zinc biosorption on palm tree leaves could be described by the Langmuir, Freundlich, Gin et al., and Sips models. Using the Langmuir equilibrium constants obtained at different temperatures, the thermodynamics properties of the biosorption (ΔG⁰, ΔH⁰, and ΔS⁰) were also determined. The values of these parameters indicated the spontaneous and endothermic nature of zinc biosorption on palm tree leaves.