Competitive Adsorption of Ag+, Pb2+, Ni2+, and Cd2+ Ions on Vermiculite

Competitive adsorption of Ag⁺, Pb²⁺, Ni²⁺, and Cd² ions on vermiuculite in a binary, ternary, and quaternary mixture was investigated in batch experiments. The effects of the presence of Ag⁺, Ni²⁺, and Cd²⁺ ions on the adsorption of Pb²⁺ ions were investigated in terms of the equilibrium isotherm. Experimental results indicated that Pb²⁺ ions always favorably adsorbed on vermiculite over Ag⁺, Ni²⁺, and Cd²⁺ ions. The adsorption equilibrium data of Pb²⁺ ions better fitted the Langmuir model than the Freundlich model. The results showed that the pseudo-second-order kinetics model was in good agreement with the experimental results for all metal ions, and the adsorption rate among the metal ions followed Ag⁺ > Pb²⁺ > Ni²⁺ > Cd²⁺. The desorption and regenration study indicated that vermiculite can be used repeatedly and be suitable for the design of a continuous process.     

SORPTION PROCESSES OF NATURAL IRANIAN BENTONITE EXCHANGED WITH CD2+, CU2+, NI2+, AND PB2+ CATIONS

Experimental studies on the retention of cadmium (Cd²⁺), copper (Cu²⁺), nickel (Ni²⁺), and lead (Pb²⁺) by bentonite samples from Iran were conducted using single- and multiple-component solutions. Based on the sorption capacity of bentonite the following order was obtained for single- and multiple-component solutions: Pb²⁺ > Cd²⁺ > Ni²⁺ > Cu²⁺. The maximum adsorption capacities of bentonite with metals in single- and multiple-component solutions were 29.5%, 22.5%, 19.2%, and 17.1% and 13.5%, 13.4%, 12.1%, and 9.1% for Pb²⁺, Cd²⁺, Ni²⁺, and Cu²⁺, respectively. Desorption isotherms of Cd²⁺, Cu²⁺, Ni²⁺, and Pb²⁺ deviated significantly from the sorption isotherms, thereby indicating irreversible or very slowly reversible sorption. Finally, soil solution saturation indices and metal speciation were assessed using the Visual MINTEQ 2.6 program and the probability of mineral precipitation was supported by scanning electron microscopy.     

Conversion of coal fly ash into zeolite and heavy metal removal characteristics of the products

Fly ash obtained from a power generation plant was used for synthesizing zeolite. Zeolites could be readily synthesized from the glassy combustion residues and showed potential for the removal of heavy metal ions. By the use of different temperatures and NaOH concentration, five different zeolites were obtained: Na-P1, faujasite, hydroxy sodalite, analcime, and cancrinite. The synthesized zeolites had greater adsorption capabilities for heavy metals than the original fly ash and natural zeolites. Na-P1 exhibited the highest adsorption capacity with a maximum value of about 1.29 mmole Pb g^-1 and had a strong affinity for Pb²⁺ ion. The metal ion selectivity of Na-P1 was determined as: Pb²⁺> Cu²⁺> Cd²⁺> Zn²⁺, consistent with the decreasing order of the radius of hydrated metal ion. The adsorption isotherm for lead by Na-P1 fitted the Freundlich rather than the Langmuir isotherm.     

Competitive adsorption of Pb, Cu and Cd ions from aqueous solutions by multiwalled carbon nanotubes

The individual and competitive adsorption capacities of Pb²⁺, Cu²⁺ and Cd²⁺ by nitric acid treated multiwalled carbon nanotubes (CNTs) were studied. The maximum sorption capacities calculated by applying the Langmuir equation to single ion adsorption isotherms were 97.08 mg/g for Pb²⁺, 24.49 mg/g for Cu²⁺ and 10.86 mg/g for Cd²⁺ at an equilibrium concentration of 10 mg/l. The competitive adsorption studies showed that the affinity order of three metal ions adsorbed by CNTs is Pb²⁺>Cu²⁺>Cd²⁺. The Langmuir adsorption model can represent experimental data of Pb²⁺ and Cu²⁺ well, but does not provide a good fit for Cd²⁺ adsorption data. The effects of solution pH, ionic strength and CNT dosage on the competitive adsorption of Pb²⁺, Cu²⁺ and Cd²⁺ ions were investigated. The comparison of CNTs with other adsorbents suggests that CNTs have great potential applications in environmental protection regardless of their higher cost at present.     

Characterization of Adsorptive Capacity and Investigation of Mechanism of Cu2+, Ni2+ and Zn2+ Adsorption on Mango Peel Waste from Constituted Metal Solution and Genuine Electroplating Effluent

Abstract

The present study reports the potential of mango peel waste (MPW) as an adsorbent material to remove Cu²⁺, Ni²⁺, and Zn²⁺ from constituted metal solutions and genuine electroplating industry wastewater. Heavy metal ions were noted to be efficiently removed from the constituted solution with the selectivity order of Cu²⁺ > Ni²⁺ > Zn²⁺. The adsorption process was pH-dependent, while the maximum adsorption was observed to occur at pH 5 to 6. Adsorption was fast as the equilibrium was established within 60 min. Maximum adsorption of the heavy metal ions at equilibrium was 46.09, 39.75, and 28.21 mg g for Cu²⁺, Ni²⁺, and Zn²⁺, respectively. Adsorption data of all the three metals fit well the Langmuir adsorption isotherm model with 0.99 regression coefficient. Release of alkali and alkaline earth metal cations (Na⁺, K⁺, Ca²⁺, Mg²⁺) and protons H⁺ from MPW, during the uptake of Cu²⁺, Ni²⁺, and Zn²⁺, and EDX analysis of MPW, before and after the metal sorption process, revealed that ion exchange was the main mechanism of sorption. FTIR analysis showed that carboxyl and hydroxyl functional groups were involved in the sorption of Cu²⁺, Ni²⁺, and Zn²⁺. MPW was also shown to be highly effective in removing metal ions from the genuine electroplating industry effluent samples as it removed all the three metal ions to the permissible levels of discharge legislated by environment protection agencies. This study indicates that MPW has the potential to effectively remove metal ions from industrial effluents.     

Synthesis of magnetic Fe3O4@SiO2-(-NH2/-COOH) nanoparticles and their application for the removal of heavy metals from wastewater

In this work, Fe₃O₄@SiO₂-(-NH₂/-COOH) nanoparticles were synthesized for the removal of Cd²⁺, Pb²⁺ and Zn²⁺ ions from wastewater. The results of characterization showed that Fe₃O₄@SiO₂-(-NH₂/-COOH) was superparamagnetic with a core–shell structure. The surface of Fe3O4 was successfully coated with silica and modified with amino groups and carboxyl groups through the use of a silane coupling agent, polyacrylamide and polyacrylic acid. The dispersion of the particles was improved, and the surface area of the Fe3O4@SiO2-(-NH2/-COOH) nanoparticles was 67.8 m²/g. The capacity of Fe₃O₄@SiO₂-(-NH₂/-COOH) to adsorb the three heavy metals was in the order Pb²⁺ > Cd²⁺ > Zn²⁺, and the optimal adsorption conditions were an adsorption dose of 0.8 g/L, a temperature of 30°C and concentrations of Pb²⁺, Cd²⁺ and Zn²⁺ below 120, 80 and 20 mg/L, respectively. The maximum adsorption capacities for Pb²⁺, Cd²⁺ and Zn²⁺ were 166.67, 84.03 and 80.43 mg/g. The adsorption kinetics followed a pseudo-second-order model and Langmuir isotherm model adequately depicted the isotherm adsorption process. Thermodynamic analysis showed that the adsorption of the three metal ions was an endothermic process and that increasing the temperature was conducive to this adsorption.     

Adsorption of Cu2+, Cd2+ and Pb2+ ions by layered double hydroxides intercalated with the chelating agents diethylenetriaminepentaacetate and meso-2,3-dimercaptosuccinate

The hydrotalcite-like compound [Zn₂Al(OH)₆]NO₃·nH₂O (ZnAl-NO₃) was intercalated with the chelating agents diethylenetriaminepentaacetic acid (dtpa) and meso-2,3-dimercaptosuccinic acid (dmsa) by anion-exchange to uptake Cu²⁺, Cd²⁺ and Pb²⁺ from aqueous solutions. The amounts of heavy metals adsorbed at variable contact times and metal concentration were determined by atomic absorption spectrometry. The amounts removed of the three metal cations by both adsorbents were high. The shape of the adsorption isotherms obtained indicated specific interactions and a high host–guest affinity. However, the metal ions were removed from solution not only by chelation, but also by precipitation or even by isomorphic substitution of Zn²⁺ by another metal ions in the brucite-like layer.     

Adsorption characteristics of metal ions by CO2-fixing Chlorella sp. HA-1

Single and binary metal systems were employed to investigate the removal characteristics of Pb²⁺, Cu²⁺, Cd²⁺, and Zn²⁺ by Chlorella sp. HA-1 that were isolated from a CO₂ fixation process. Adsorption test of single metal systems showed that the maximum metal uptakes were 0.767 mmol Pb²⁺, 0.450 mmol Cd²⁺, 0.334 mmol Cu²⁺ and 0.389 mmol Zn²⁺ per gram of dry cell. In the binary metal systems, the metal ions on Chlorella sp. HA-1 were adsorbed selectively according to their adsorption characteristics. Pb²⁺ ions significantly inhibited the adsorption of Cu²⁺, Zn²⁺, and Cd²⁺ ions, while Cu²⁺ ions decreased remarkably the metal uptake of Cd²⁺ and Zn²⁺ ions. The relative adsorption between Cd²⁺ and Zn²⁺ ions was reduced similarly by the presence of the other metal ions.     

Removal of Cd2+, Cu2+, Ni2+, and Pb2+ ions from aqueous solutions using tururi fibers as an adsorbent

This work investigates the removal of Cd²⁺, Cu²⁺, Ni²⁺, and Pb²⁺ ions from aqueous solutions using tururi fibers as an adsorbent under both batchwise and fixed‐bed conditions. It was found that modification of the tururi fibers with sodium hydroxide increased the adsorption efficiencies of all metal ions studied. The fractional factorial design showed that pH, adsorbent mass, agitation rate, and initial metal concentration influenced each metal adsorption differently. The kinetics showed that multi‐element adsorption equilibria were reached after 15 min following pseudo‐second‐order kinetics. The Langmuir, Freundlich, and Redlich–Peterson models were used to evaluate the adsorption capacities by tururi fibers. The Langmuir model was found to be suitable for all metal ions. Breakthrough curves revealed that saturation of the bed was reached in 160.0 mL with Cd²⁺ and Cu²⁺, and 52.0 mL with Ni²⁺ and Pb²⁺. The Thomas model was applied to the experimental data of breakthrough curves and represented the data well. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40883.     

Interaction of metal ions with montmorillonite and vermiculite

The behaviour of montmorillonite and vermiculite toward adsorption of Cd²⁺, Pb²⁺, Zn²⁺, Mn²⁺, Cu²⁺ and Zn²⁺ was compared. In general, the uptake of metal ions on both clay minerals decreased with decreasing of pH and in the presence of ligands forming stable complexes. Metal ion retention on montmorillonite was less affected by the competition of sodium ions at high ionic strengths with respect to vermiculite. On the other hand, the total capacity of vermiculite with respect to the investigated metal ions was found to be much higher than that of montmorillonite, whereas the order of affinity of the metal ions for the two clay minerals was similar, i.e.: Pb²⁺ = Cd²⁺ < Cu²⁺ < Zn²⁺ < Mn²⁺ < Ni²⁺ for montmorillonite and Pb²⁺ < Cu²⁺ < Cd²⁺ < Zn²⁺ < Ni²⁺ < Mn²⁺ for vermiculite.The similarities and differences between the two clay minerals were also investigated by principal component analysis and hierarchical cluster analysis.The results of this study may be used to predict the uptake efficiency of these adsorbents in view of their application for the removal of metal ions from contaminated effluents. The choice of vermiculite or montmorillonite for the uptake of metal ions or other elements will depend on the composition of the effluent to be treated.     

Adsorption of Pb2+ and Cd2+ onto a Novel Activated Carbon‐Chitosan Complex

A novel activated carbon‐chitosan complex adsorbent (ACCA) was prepared via the crosslinking of glutaraldehyde and activated carbon‐(NH₂‐protected) chitosan complex under microwave irradiation. The surface morphology of this adsorbent was characterized. The adsorption of ACCA for Pb²⁺ and Cd²⁺ was investigated. The results demonstrate that ACCA has higher adsorption capacity than chitosan. The adsorption follows pseudo first‐order kinetics. The isotherm adsorption equilibria are better described by Freundlich and Dubinin‐Radushkevich isotherms than by the Langmuir isotherm. The adsorbent can be recycled. These results have important implications for the design of low‐cost and effective adsorbents in the removal of heavy metal ions from wastewaters.     

Studies on Hg(II) ion retention properties of cross-linked graft copolymer of acrylic acid and its analytical application

The effects of different parameters such as time, concentration, pH and temperature, on metal ion retention properties of the polymer have been investigated. Metal ion adsorption kinetics, isotherms and thermodynamics have been studied. A plausible mechanism for mercury ion retention has been suggested. Mercuric ion has been isolated quantitatively from various synthetic mixture containing metal ions (Ni²⁺, Cd²⁺, Pb²⁺ and Zn²⁺).     

Reusability and selective adsorption of Pb<Superscript>2+</Superscript> on chitosan/P(2-acrylamido-2-methyl-1-propanesulfonic acid-<Emphasis Type="Italic">co</Emphasis>-acrylic acid) hydrogel

Reusability and selective adsorption toward Pb²⁺ with the coexistence of Cd²⁺, Co²⁺, Cu²⁺ and Ni²⁺ ions on chitosan/P(2-acrylamido-2-methyl-1-propanesulfonic acid-co-acrylic acid) [CS/P(AMPS-co-AA)] hydrogel, a multi-functionalized adsorbent containing –NH₂, –OH, –COOH and –SO₃H groups was studied. The CS/P(AMPS-co-AA) was prepared in aqueous solution by a simple one-step procedure using glow discharge electrolysis plasma technique. The reusability of adsorbent in HNO₃, EDTA-2Na and EDTA-4Na was investigated in detail. The competitive adsorption of the metal ions at the initial stage was compared between their equal mass concentration and equal molar concentration. In addition, the adsorption mechanism of the adsorbent for adsorption of Pb²⁺ was also analyzed by XPS. The results showed that the optimum pH of adsorption was 4.8, and time of adsorption equilibrium was about 180 min. Adsorption kinetics fitted well in the pseudo second-order model. The equilibrium adsorption capacities of Pb²⁺, Cd²⁺, Co²⁺, Cu²⁺, and Ni²⁺ at pH 4.8 were obtained as 673.3, 358.3, 176.7, 235.0 and 171.7 mg g^?1, in their given order. The adsorbent displayed an excellent reusability using 0.015 mol L^?1 EDTA-4Na solution as the eluent, and the desorption ratio could not correctly reflect the true characteristics of adsorption/desorption process. Moreover, the adsorbent showed good adsorption selectivity for Pb²⁺. The molar adsorption capacity at the initial stage with equal molar concentration was more reliable than the mass adsorption capacity during the study of selective adsorption. According to the XPS results, the adsorption of Pb²⁺ ions by the CS/P(AMPS-co-AA) absorbent could be attributed to the coordination between N atom and Pb²⁺ and ion-exchange between Na⁺ and Pb²⁺.     

Adsorption and Separation of Mercury: Sorption-Desorption of Hg2+ with Cross-Linked Graft Copolymer of Acrylic Acid and its Application in the Metal Ion Separation Process

A selective and reliable method has been developed for the extraction and separation of mercuric ion with cross-linked graft copolymer of acrylic acid based on sorption-desorption studies. The graft copolymer acts as an ion exchanger. The physico-chemical properties of the exchanger, and optimum pH, time, and temperature for Hg²⁺ adsorption were determined. Metal ion adsorption kinetics, isotherms, and thermodynamics have been studied. A plausible mechanism for mercury ion extraction has been suggested. Mercuric ion has been separated quantitatively from various synthetic mixtures containing metal ions (Ni²⁺, Cd²⁺, Pb²⁺, and Zn²⁺).     

Competitive Metal Ion Binding to a Silicate-Immobilized Datura innoxia Biomaterial

Abstract

Metal ion binding with a flowing system to a biosorbent comprised of cultured cell-wall fragment within a polysilicate matrix has been investigated. Solutions containing 0.10 mM Pb²⁺, Cu²⁺, Ni²⁺, Cd²⁺, and Zn²⁺ were exposed to the material in combinations of two, three, and five metals while simultaneously monitoring the concentration of all metals in the effluent stream. A relative affinity order of Pb²⁺ > Cu²⁺ >> Zn²⁺ ≈ Cd²⁺ > Ni²⁺ was determined when all five metal ions were exposed to the material. Lower-affinity metal ions were exposed to the material sequentially. Both metal-specific and common binding sites were observed for each metal ion. The presence of both binding sites that are common to all metal ions investigated and sites that appear to be unique for each metal ion could significantly impact the utility of single-metal ion studies on the application of such biosorbents for the selective removal of metal ions from natural water.     

Synthesis and characterization of a new guar gum 4‐hydroxybenzoic acid resin and its use for the separation of heavy metal ions in industrial effluents

Hydroxybenzoic acid group has been incorporated onto guar gum by modified Porath's method of functionalization of polysaccharides. The newly synthesized guar gum 4‐hydroxybenzoic acid (GHBA) resin was characterized by Fourier‐transform infrared spectroscopy, elemental analysis, ion‐exchange capacity, column reusability, and physicochemical properties. The distribution coefficient (K_d) values and effect of pH on chelation of these metal ions using batch method were studied. The separations of mixture of Fe²⁺, Zn²⁺, Cu²⁺, Cd²⁺, and Pb²⁺ metal ions on GHBA resin on the basis of their distribution coefficient at various pH were also achieved using column chromatography. The effect of experimental parameters such as pH, treatment time, agitation speed, temperature, adsorbent dose, initial metal ion concentration, and flow rate on the removal of metal ions has been also studied. GHBA resin is effective adsorbents for the removal of different toxic metal ions from aqueous solutions and follows the order: Fe²⁺ > Zn²⁺ > Cu²⁺ > Cd²⁺ > Pb²⁺. POLYM. ENG. SCI. 2013. © 2012 Society of Plastics Engineers     

Sorption behavior of ion-exchange terpolymer resin with environmental impact: synthesis,characterization and isotherm models

A novel terpolymer acts as an effective chelating ion exchanger which was synthesized using 2-amino-6-nitro-benzothiazole and semicarbazide with formaldehyde (BSF) by solution condensation technique. Its ion exchange properties was determined against certain metal ions viz. Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Pb²⁺ using batch equilibrium technique with different electrolyte concentrations, pH ranges and time intervals. The results of batch studies revealed that the separation of the selected metal ions from the aqueous solution by the terpolymer is found to be excellent compared to the available commercial resins and earlier reported resins. The order of metal ion uptake at higher concentrations by the BSF terpolymer at lower pH is Cu²⁺ > Ni²⁺ > Fe³⁺ and at lower concentration at higher pH is Zn²⁺ > Co²⁺ > Pb²⁺. The reusability of the resin was also reported for its effective ion-exchange behaviour for several cycles. The adsorption isotherm model was evaluated and the results are in good agreement with each other. The order of kinetics was also determined and the resin follows pseudo-second-order kinetics. Moreover, the physico-chemical analysis gives strong evidence for the effective metal ion removal compared with the earlier reported and commercial resins. Earlier, the structure and the properties of the synthesized novel chelating resin were clearly elucidated by elemental, FTIR, UV–Vis, ¹H & ¹³C NMR spectra, GPC, SEM and XRD.     

L-cystein modified bentonite-cellulose nanocomposite (cellu/cys-bent) for adsorption of Cu2+, Pb2+, and Cd2+ ions from aqueous solution

In this study, L-cystein modified bentonite-cellulose (cellu/cys-bent) nanocomposite was synthesized and characterized by XRD, FTIR, SEM with EDS, TGA, and TEM techniques. In order to optimize the process the effect of various operational parameters such as pH, adsorbent dosage, contact time, and temperature were also investigated. The adsorption experiments were carried out in initial concentrations range of 20-100 mg L^?1and the adsorbent affinity for metal ions was found to be in order of Cu²⁺ > Pb²⁺ > Cd²⁺. The optimum pH for adsorption of Cu²⁺ and Cd²⁺ was observed at 5 while for Pb²⁺ it was pH 6. Based on the Langmuir model, the maximum adsorption capacity of Cu²⁺, Pb²⁺, and Cd²⁺ at 50^?C was found to be 32.36, 18.52, and 16.12 mg g^?1, respectively. The Langmuir isotherm and pseudo-second order model were found to be better fitted than the other isotherms and kinetic models. The results of thermodynamic parameters confirmed the process to be endothermic and spontaneous in nature.     

Uptake of Cu, Cd and Pb on Zn–Al layered double hydroxide intercalated with edta

Hydrotalcite-like compound [Zn₂Al(OH)₆]₂edta·nH₂O(ZnAl-edta) was obtained from the precursor [Zn₂Al(OH)₆]NO₃·nH₂O (ZnAl-NO₃), by the anion exchange method, with the aim of uptake Cu²⁺, Cd²⁺ and Pb²⁺ from the aqueous solutions by chelating process between edta and metal cations. The amount of Cu²⁺, Cd²⁺ and Pb²⁺ adsorbed was monitorized by atomic absorption technique at different contact time, pH and metal concentrations. The results indicate the very fast adsorption of the metal cations by ZnAl-edta reaching the equilibrium of the uptake reaction in two hours for Cu and Pb and 24 h for Cd. The shape of the adsorption isotherms suggests specific interaction and high host–guest affinity. At pH 5.5 and initial concentration C_i = 10 mM, the amount adsorbed was C_s = 1117, 375 and 871 μmol/g for Cu²⁺, Cd²⁺ and Pb²⁺, respectively.     

Evaluation of Mononuclear Ni(II) Complex of a Tetra-cryptanded Vic-dioxime and its Model Compound 14-Membered N2O2S2-Macrobicyclic Ligand as Pb2+, Cd2+, and Hg2+ Extractants

Abstract

A macrobicyclic ligand and its mononuclear Ni(II) complex were studied as extractants for Pb²⁺, Cd²⁺, and Hg²⁺. The metal picrates were used for extraction experiments. The solutions of the ligands in chloroform and dichloromethane were used as organic phases. The most effective transport was observed for Cd²⁺ picrate among the tested metal picrates with dichloromethane. The effect of pH on the extraction efficiency was evaluated for both organic solvents. The cations were stripped from the organic phase with 0.75 M nitric acid and the ligands were determined spectrophotometrically in the proper wavelength. The recovery% values of the ligands were calculated at pH 3.5.