Aqueous Hydrotropic Solution as an Efficient Solubilizing Agent for Andrographolide from Andrographis paniculata Leaves

Abstract

An aqueous solution based extraction process for andrographolide from Andrographis paniculata leaves has been developed using alkyl benzene sulfonates and carboxylates as hydrotropes. The plant cells are permeabilized by the hydrotrope solutions followed by solubilization of andrographolide into the solutions. The extraction and solubilization of andrographolide is affected by structure and concentration of hydrotrope, temperature and particle size. Sodium cumene sulfonate (Na‐CS) shows the most efficient solubilization of andrographolide amongst the hydrotropes studied. The solubility of andrographolide increased by two orders of magnitude in Na‐CS aqueous solutions and ～96% andrographolide extraction was achieved in just 20 min.     

Partitioning of o/p-Nitrophenols in the Presence of Hydrotropes in Aqueous Solutions

Abstract

Partitioning of o/p-nitrophenols between organic solvents and water in the presence of hydrotropes such as sodium toluene sulfonate, sodium xylene sulfonate, and sodium cumene sulfonate, has been experimentally investigated and modelled in terms of co-aggregation of the hydrotrope and nitrophenols in aqueous solutions. The phenol-hydrotrope and hydrotrope-hydrotrope interactions are characterized by an aggregation model. The experimental data for a series of hydrotropes are further used to predict the partitioning behavior of p-nitrophenol in the presence of sodium butyl benzene sulfonate (Na-NBBS). The aggregation number of NaNBBS, (～30) obtained from the partitioning data, matches well with that obtained by small angle neutron scattering.     

Effect of hydrotropes on solubility and mass transfer coefficient of lauric acid

A comprehensive investigation on the solubility and mass transfer coefficient enhancement of lauric acid through hydrotropy has been undertaken. The solubility and mass transfer studies were carried out using hydrotropes such as sodium cumene sulfonate, sodium p-xylene sulfonate and sodium p-toluene sulfonate under a wide range of hydrotrope concentrations (0 to 3.0 mol/L) and different system temperatures (303 to 333 K). The effectiveness of hydrotropes was measured in terms of Setschnew constant K _s and reported for all hydrotropes used in this study. The solubility data are also fitted in a polynomial equation as the function of hydrotrope concentration.     

Hydrotropic Extraction of Reserpine from Rauwolfia vomitoria Roots

Aqueous solutions of sodium cumene sulfonate give quantitative and faster extraction of reserpine from Rauwolfia vomitoria as compared to the extraction using methanol. The extraction rate is influenced by intraparticle diffusion and increases with increasing temperature and hydrotrope concentration. The dynamic extraction data were fitted in a mass transfer model to evaluate diffusion coefficient of reserpine in the solid plant matrix. Amongst all hydrotropes, sodium cumene sulfonate, gave the best extraction and extraction rates of reserpine. The reserpine crystals recovered from aqueous hydrotrope solutions were much smaller in size and showed different morphology than those from methanol.     

Effect of hydrotropes on the aqueous solution behavior of surfactants

Aqueous solutions of surfactants—cationic: tetradecyltrimethylammonium bromide (C₁₄TABr); anionic: sodium dodecyl sulfate (SDS); and nonionic: polyoxyethylene t-octylphenol (trade name Triton X-102, also called OPE-8)— in the presence of three hydrotropes, viz., sodium xylene sulfonate, sodium p-toluene sulfonate, and sodium chlorobenzene sulfonate, were examined by measuring surface tension, viscosity, and cloud points for the nonionic surfactant. The results show a marked decrease in the critical micelle concentration with increase in hydrotrope concentration for C₁₄TABr, a marginal decrease for SDS, and very little change for OPE-8 up to 0.1 M hydrotrope. The viscosity of cationic surfactant solutions showed a remarkable increase in the presence of trace amounts of hydrotropes (up to 15 mM). In contrast, the SDS solution showed only a slight increase in viscosity at high hydrotrope concentration (150 mM), and the viscosity of the OPE-8 solution remained constant. The cloud point of OPE-8 increased in the presence of hydrotropes, unlike its behavior with the simple salt NaCl. The strong dependence of the solution behavior of cationic surfactants on the presence of hydrotropes is discussed in terms of electrostatic interaction.     

Hydrotropic and surfactant properties of novel diisopropyl naphthalene sulfonates

A novel surfactant and hydrotrope, sodium diisopropylnaphthalene sulfonate (SDIPNS) has been developed. It contains about 92% diisopropylnaphthalene sulfonate, compared to other materials which are less than 50% diisopropylnaphthalene sulfonate. Aqueous solutions of 34–36% active SDIPNS have dual functionality. They have excellent surface properties and are compatible with conventional anionic, nonionic, and amphoteric surfactants. They demonstrate good laundering detergency in combination with sodium lauryl ethoxy sulfate, with or without builder. They maintain surface activity in 150 ppm hard water (Ca²⁺/Mg²⁺=2∶1), 5% NaCl, pH 2, and pH 12. They are effective hydrotropes. They enhance surfactant solubility, raise the cloud point of nonionic surfactants, and modify the viscosity of surfactant formulations. They are light in color and are low-foaming. Presented as a Poster Session at the American Oil Chemists' Society Annual Meeting, May 9–12, 1999, Orlando, Florida.     

Effective Separation of Petro Products through Hydrotropy

This paper presents a comprehensive study on the effect of hydrotropes such as sodium salicylate, sodium benzoate, and nicotinamide on the separation of a near boiling mixture, o‐/p‐xylene. The influence of a wide range of hydrotrope concentrations (0 to 3.0 mol/L) and different system temperatures (303 to 333 K) on the separation of o‐/p‐xylene were studied. All hydrotropes used in this work showed an enhancement in the percentage extraction of p‐xylene to different degrees. The percentage extraction of p‐xylene from the o‐/p‐xylene mixture increases with an increase in hydrotrope concentration and also with system temperature. A minimum hydrotrope concentration (MHC) was found essential to initiate significant extraction of p‐xylene from the o‐/p‐xylene mixture. The maximum enhancement factor, which is the ratio of the value in the presence and absence of a hydrotrope, was determined for both cases. The Setschenow constant, k_s, a measure of the effectiveness of a hydrotrope, was determined for each case.     

Synthesis and elastomer behavior of a novel polymer electrolyte of acrylic ester–salt copolymer

This paper studied the synthesis of a novel elastomeric copolymer electrolyte in an aqueous phase. The monomer, sodium allyl sulfonate (SAS), was dissolved in continuous aqueous phase and the second monomer, methyl acrylate (MA), was supplied from MA micelles as dispersed phase. The copolymerization of the two monomers took place in continuous aqueous phase. Confirmed by FTIR and ¹H‐NMR, a binary copolymer electrolyte of MA and SAS, poly(MA‐co‐SAS), was obtained. The glass transition temperature of the copolymer was indicated as 20.4°C by DSC thermogram, thus, it behaves an elastomer in normal ambient temperature. The mechanical properties of the composite films consisting of both poly(MA‐co‐SAS) and Cu²⁺ ions or reduced copper were affected by the content of ions and reduced copper. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2796–2802, 2006     

Hydrotrope-Induced Enhancement of Room Temperature Surface Activity for High Krafft Point Fluorinated Surfactants

Potassium perfluorooctane sulfonate (KPFOS) and sodium perfluorooctane sulfonate (NaPFOS) exhibit poor surface activities in aqueous solution at room temperature because of their high Krafft points. In this work, we attempted to increase the solubility of KPFOS and NaPFOS and consequently improve their surface activities at room temperature with sodium p‐methylbenzene sulfonate (BS) and urea, which are typical hydrotropes in industrial applications. The effects of BS and urea on the surface tension of the aqueous solutions of KPFOS and NaPFOS were investigated at 25 °C. When the hydrotropes were added, the effectiveness of KPFOS and NaPFOS in surface tension reduction was greatly enhanced and KPFOS showed higher efficiency in surface tension reduction than NaPFOS. On the other hand, BS had much stronger ability than urea to reduce the surface tension of KPFOS and NaPFOS in water. In particular, with the assistance of BS the minimum surface tension of KPFOS approached 19 mN/m at 25 °C. It was worth noting that in the presence of BS, the surface tension of an apparently “saturated” solution (i.e., with coexisting surfactant solid) continuously decreased with increasing surfactant concentration. This behavior was ascribed to enrichment of branched PFOS isomers in aqueous phase with the assistance of BS, as evidenced by high‐resolution ¹⁹F NMR. Hydrotropes were able to recover the inherent character of KPFOS and NaPFOS as highly surface‐active fluorinated surfactants by increasing the solubility of branched isomers. This is an easy way to enhance the effectiveness in surface tension reduction at room temperature for fluorinated surfactants with high Krafft points.     

Hydrotropic properties of some short-chain alkylbenzene- and alkylnaphthalene sulfonates

Alkylbenzene sulfonates based on toluene, xylene and cumene, and alkylnaphthalene sulfonates act as hydrotropes in surfactant systems. One measure of hydrotropicity is the amount of hydrotrope required to clear a cloudy detergent formulation; some hydrotropes are more effective than others, depending on the surfactant formulation. Another measure is the modification of the viscosity of surfactant formulations; the change in the viscosity depends on the amount and type of hydrotrope used and on the specific formulation involved. Additionally, alkylnaphthalene sulfonate hydrotropes change the solubility of nonionic surfactants in water, and both types of hydrotrope raise the cloud point of nonionic surfactant solutions; however, the naphthalene-based hydrotropes are more efficient. Ross-Miles foam test data are used to compare the foam characteristics of different alkylnaphthalene sulfonates. A critical micelle concentration (CMC) was determined for the alkylnaphthalene sulfonates, but although alkylbenzene sulfonates do show some surface activity, a CMC could not be found for these materials. Presented as a poster session at the AOCS Annual Meeting & Expo, May 1997, Seattle, Washington, and at Soaps, Detergents, and Oleochemicals: An AOCS International Conference, October 1997, Fort Lauderdale, Florida.     

Alcohophilic gels: Polymeric organogels composing carboxylic and sulfonic acid groups

Polymeric organogels based on acrylic acid (AA) and sodium allyl sulfonate (SAS) were prepared through solution polymerization using a persulfate initiator and a polyethylene glycol diacrylate (PEGDA) crosslinker. FTIR spectroscopy, elemental, and rheological analyses were used for a preliminary characterization. Thermo‐mechanical analysis was also carried out for characterizing samples. Glass transition temperature (T_g) of copolymer was decreased after acid treatment which could be attributed to detachment of ion pairs during the post‐treatment. Due to counterion binding of Na⁺ to form ionomer, the poly(AA‐SAS) gels showed no polyelectrolyte behavior to have high swelling capacity in conventional alcohols, i.e., ethanol and methanol. It was postulated that modification via removing Na⁺ could help breaking ion pair aggregates which leads to swelling enhancement. Thus, poly(AA‐SAS) was treated with hydrochloric acid to remove (Na⁺) counterions. This modification led to the gel transform from ionomer regime to a polyelectrolyte regime in which free mobile ions were existed in the network. The gel swelling capacity was increased due to raise of mobile ions after the treatment. It was found that both of the acid concentration and treatment time had constructive influence on the gel alcohophilicity. The acid‐treated samples could imbibe ethanol and methanol as high as 25.8 and 39.5 g/g, respectively. They may be superior candidates for applications such as pharmaceuticals gels and fire starters. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

A New Anionic Oxalamide Lauryl Succinate Sodium Sulfonate Gemini Surfactant: Microwave-Assisted Synthesis and Surface Activities

An anionic Gemini surfactant, oxalamide lauryl succinate sodium sulfonate, was synthesized successfully through amidation, esterification and sulfonation reactions under microwave irradiation conditions by using maleic anhydride, ethylenediamine, lauryl alcohol, sodium sulfite as the starting materials. The best reaction conditions for synthesize the target product were obtained by single factor and orthogonal optimization methods. FTIR, elemental analysis and ¹H‐NMR analysis were used to confirm the chemical structure of the surfactant. The critical micelle concentration (CMC) in aqueous solution, surface tension, emulsification capacity and foaming power were determined. The critical micelle concentration and γ_CMC are respectively equal to 3.5 × 10^?4 mol L^?1 and 21.5 mN m^?1. It was found that microwave‐assisted synthesis is an efficient means of preparation of this anionic Gemini surfactant with shorter times and higher yields.     

Pseudohydroxide Extraction from Aqueous Sodium Hydroxide Solutions with 3,5‐di‐tert‐Butylphenol in Isopar® L Modified with 1‐Octanol

Abstract

Pseudohydroxide extraction (PHE) was investigated for recovering sodium hydroxide (NaOH) from alkaline process solutions. PHE relies on the deprotonation of a lipophilic weak acid by hydroxide ion with concomitant transfer of sodium ion into an organic phase. Contact of the sodium‐loaded organic phase with water results in the reconstitution of the extractant in the organic phase and NaOH in the aqueous phase, thus leading to a process in which NaOH equivalents are transferred from an alkaline feed solution to an aqueous stripping solution. In this work, we investigated PHE using a process‐friendly diluent—Isopar^® L. The lipophilic cation exchanger 3,5‐di‐tert‐butylphenol (35‐DTBP) was used as the extractant. The Isopar^® L diluent was modified with 1‐octanol to improve its solvation properties and the solubility of 35‐DTBP so that practical Na⁺ concentrations could be achieved in the process solvent. The PHE mechanism at process‐relevant conditions was explored by Raman and Fourier transform infrared spectroscopic measurements. Complementary electrospray ionization mass spectrometry studies were also performed. Equilibrium computer modeling suggested that the Na⁺ extraction behavior can be largely explained by the formation of 1∶1 and 1∶2 Na/35‐DTBP species in the organic phase. Extraction isotherms obtained using simulated caustic leaching solutions indicate the potential utility of this approach for recycling NaOH from complex alkaline mixtures.     

Influences of co‐monomers and electrolyte acidity on morphological structure of copper‐in‐copolymer gradient film

In this paper, the influences of composition of copolymers and acidity of electrolyte in an electrochemical reactor on morphological structure of copper‐in‐polymer gradient composite film were investigated. For binary copolymers, poly(acrylonitrile‐co‐methyl acrylate) [P(AN‐co‐MA)] and poly(acrylonitrile‐co‐sodium allyl sulfonate) [P(AN‐co‐SAS)], the charged group ? SO in P(AN‐co‐SAS) improves the swelling of the copolymer phase and copper reduction to form gradient morphology; the carboxylic ester group in P(AN‐co‐MA) is not effective because of its poor hydrophilicity, but it is a cooperating component with P(AN‐co‐SAS) to avoid excess of counterion (i.e., Na⁺) in SCF, which might severely interrupt Cu²⁺ coexistence. The swelling of the polymer phase is helpful to decrease the energy of the transfer ions in SCF and to enhance copper deposition and gradient formation. The increase of surface energy because of cluster growth raises the surface energy level of deposited Cu⁰ clusters. The conteraction between these two energy factors allows the size of clusters to be 50–100 nm. The appropriate H⁺ concentration improves active Cu²⁺ reduction and thus deposited gradient copper phase in the copolymer matrix. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 373–380, 2004     

Synthesis and aqueous solution behaviors of sodium sulfonate‐terminated dendritic poly(ester‐amine)

Sodium sulfonate‐terminated dendritic poly(ester‐amine) (SPEA) was synthesized by sulfonation of acrylic double bond‐terminated dendritic poly(ester‐amine) (APEA) with sodium hydrogen sulfite (NaHSO₃) in mixture of diglycol and 2‐butanone under normal pressure. The structure of SPEA was characterized by IR, ¹H‐NMR, and elemental analysis. SPEA was water‐soluble. 1.0–40.0% (mass) SPEA aqueous solutions appeared as dilatant fluid. When pH value varied from 1.5 to 12.0, the viscosity of 1–5% (mass) SPEA aqueous solutions changed very small, and the electric conductivity almost kept stable within pH 3.0–10.0. The relationship between the viscosity and the concentration of SPEA water solutions was similar to that of NaCl water solutions. The surface tension of SPEA water solutions was lower than that of polyethylene glycol 2000 water solutions with the same concentration. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Properties of high‐temperature drilling fluids incorporating disodium itaconate/acrylamide/sodium 2‐acrylamido‐2‐methylpropanesulfonate terpolymers as fluid‐loss reducers

The terpolymer of disodium itaconate (DIA), acrylamide (AM) and sodium 2‐acrylamido‐2‐methyl‐1‐propane sulfonate (SAMPS) was synthesized through free‐radical polymerization, and characterized using FTIR and TGA methods. The IR spectra of DIA‐AM‐SAMPS terpolymer confirmed that there was no olefinic band at 1635–1620 cm^?1, while the TGA results revealed that the terpolymer was of higher thermal stability than the SAMPS homopolymer. The filtrate volume reduced with increase of the terpolymer concentration before or after the aging test. The rheology properties of both fresh‐water mud and salt‐water mud were improved by DIA‐AM‐SAMPS terpolymer, and apparent viscosity (η_a); plastic viscosity (η_b) and yield point (τ₀) of salt‐water mud reached the smallest values at 1.2% of the terpolymer concentration after the aging test. The particle size data demonstrated that only a small change of the clay particle size occurred before and after the aging test at 220°C. This further confirmed the thermal stability of the terpolymer–clay dispersion from another point of view. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3068–3075, 2002; DOI 10.1002/app.2335     

The Solvent Extraction of Boron with Synthesized Aliphatic 1,3‐Diols: Stripping and Extraction Behavior of Boron by 2,2,5‐Trimethyl‐1,3‐hexanediol

Abstract

A variety of aliphatic 1,3‐diols (4a–c, 5a–c, 6a–c) was synthesized from β‐hydroxy carbonyl compounds (1–3) for potential use in the solvent extraction of boron. Primary‐secondary and primary‐tertiary alcohol structures of 1,3‐diols substituted with isopropyl, isobutyl, and isopentyl groups have been demonstrated to be very efficient for the solvent extraction of boric acid from aqueous solutions. The extraction ability of 2,2,5‐trimethyl‐1,3‐hexanediol (5b) was investigated as a function of 5b concentration, solution pH, solvent properties, and stripping conditions. Extraction efficiency increased with increasing concentration of 5b, and the best extraction of boron (96.8%) was found to be at an equilibrium pH of 2 with 0.5 M of 5b. Chloroform, toluene, chlorobenzene, 2‐octanol, and n‐amyl alcohol were found to be suitable solvents for the solvent extraction of boron. The boron complex can be recovered from the organic phase by treatment with an aqueous solution of sodium hydroxide. The highest ratio (96.7%) of boron was recovered by 0.1 M of sodium hydroxide solution.     

EXTRACTIVE DISTILLATION WITH AQUEOUS SOLUTIONS OF HYDROTROPES

The effect of hydrotropes on vapor-liquid equilibrium of a mixture provides a potential technique of extractive distillation for systems which are difficult or impossible to separate by normal rectification. Various hydrotropes, such as sodium toluate, sodium toluence sulfonate, sodium cymcnc sulfonate, sodium mesitylene sulfonate and sodium salicylate, in aqueous solutions have been tested for the separation of close-boiling point mixtures, such as p-cresol/2,6-xylenol, isopropanol/ fm-butanol, and wc-butanol/rert-butanol. The changes in the relative volatility increase with the concentration of hydrotrope and with the hydrotrope to solute ratio.     

丙烯腈-苯乙烯磺酸共聚物/层状双金属氢氧化物纳米复合质子传导聚合物电解质的制备与表征

Acrylonitrile-sodium styrene sulfonate copolymer/layered double hydroxides nanocomposites were prepared by in situ aqueous precipitation copolymerization of acrylonitrile （AN） and sodium styrene sulfonate （SSS） in the presence of 4-vinylbenzene sulfonate intercalated layered double hydroxides （MgA1-VBS LDHs） and transferred to acrylonitrile-styrene sulfonic acid （AN-SSA） copolymer/LDHs nanocomposites as a proton-conducting polymer electrolyte. MgA1-VBS LDHs were prepared by a coprecipitation method, and the structure and composition of MgAl-VBS LDHs were determined by X-ray diffraction （XRD）, infrared spectroscopy, and elemental analysis. X-ray diffraction result of AN-SSS copolymer/LDHs nanocomposites indicated that the LDHs layers were well dispersed in the AN-SSS copolymer matrix. All the AN-SSS copolymer/LDHs nanocomposites showed significant enhancement of the decomposition temperatures compared with the pristine AN-SSS copolymer, as identified by the thermogravimetric analysis. The methanol crossover was decreased and the proton conductivity was highly enhanced for the AN-SSA copolymer/LDHs nanocomposite electrolyte systems. In the case of the nanocomposite electrolyte containing 2% （by mass） LDHs, the proton conductivity of 2.60×10^- 3 S·m^-1 was achieved for the polymer electrolyte.     

A molecular‐thermodynamic approach to predict the micellization of binary surfactant mixtures containing amino sulfonate amphoteric surfactant and nonionic surfactant

A molecular‐thermodynamic approach was adopted to predict the value of mixed critical micelle concentration (cmc) for the binary surfactant mixtures constituted by an amino sulfonate amphoteric surfactant, sodium 3‐(N‐dodecyl ethylenediamino)‐2‐hydropropyl sulfonate (abbr. C12AS), and a nonionic surfactant, octylphenol polyethylene ether (OP‐n, where n denotes the average number of oxyethylene glycol ether). In this investigation, considering two positive charges on the hydrophilic group of C12AS, which is unlike to conventional zwitterionic surfactants having one positive charge (such as, alkylbetaine, etc.), three schemes were designed to obtain the geometric parameter describing the dipole structure of C12AS. According to the selected optimum scheme, four cases corresponding to the different conformations of both the headgroup and the hydrocarbon chain of surfactant were discussed. The results show that the predicted value of mixed cmc for the C12AS/OP‐n mixtures agrees well with the experiment value. The deviation of the predicted value from the experimental value can be explained by the effect of the hydrophilicity of OP‐n on the process of micellization. © 2017 American Institute of Chemical Engineers AIChE J, 2017