Chelation ion‐exchange properties of copolymer resin derived from 4‐hydroxyacetophenone,oxamide, and formaldehyde

A copolymer (4‐HAOF) prepared by condensation of 4‐hydroxyacetophenone and oxamide with formaldehyde in the presence of an acid catalyst proved to be a selective chelating ion‐exchange copolymer for certain metals. Chelating ion‐exchange properties of this copolymer were studied for Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁺ ions. A batch equilibrium method was employed in the study of the selectivity of metal‐ion uptake involving the measurements of the distribution of a given metal ion between the copolymer sample and a solution containing the metal ion. The study was carried out over a wide pH range and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe³⁺ ions than for Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Cu²⁺, Ni²⁺, and Hg²⁺ ions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 787–790, 2003     

Synthesis of resin IV: Salicylic acid,diaminonaphthalein, and formaldehyde terpolymer and its ion exchange

This article reports the synthesis, characterization, and ion exchange properties of a terpolymer. The terpolymer resin salicylic acid‐diaminonaphthalein‐formaldehyde (SDNF) was synthesized by the condensation of salicylic acid and diaminonaphthalein with formaldehyde in the presence of a hydrochloric acid catalyst. Terpolymer resin was characterized by elemental analysis, infrared (IR) spectroscopy, nuclear magnetic resonance spectroscopy, and UV–Visible spectral studies. The number average molecular weight of the resin was determined by nonaqueous conductometric titration. Chelation ion exchange properties have also been studied for Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺ ions employing a batch equilibrium method. It was employed to study the selectivity of metal ion uptake involving the measurements of distribution of a given metal ion between the polymer sample and a solution containing the metal ion. The study was carried out over wide pH range and in a media of various ionic strengths. The terpolymer showed higher selectivity for Fe³⁺, Cu²⁺, and Ni²⁺ions than for Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ ions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Characterization of Adsorptive Capacity and Investigation of Mechanism of Cu2+, Ni2+ and Zn2+ Adsorption on Mango Peel Waste from Constituted Metal Solution and Genuine Electroplating Effluent

Abstract

The present study reports the potential of mango peel waste (MPW) as an adsorbent material to remove Cu²⁺, Ni²⁺, and Zn²⁺ from constituted metal solutions and genuine electroplating industry wastewater. Heavy metal ions were noted to be efficiently removed from the constituted solution with the selectivity order of Cu²⁺ > Ni²⁺ > Zn²⁺. The adsorption process was pH-dependent, while the maximum adsorption was observed to occur at pH 5 to 6. Adsorption was fast as the equilibrium was established within 60 min. Maximum adsorption of the heavy metal ions at equilibrium was 46.09, 39.75, and 28.21 mg g for Cu²⁺, Ni²⁺, and Zn²⁺, respectively. Adsorption data of all the three metals fit well the Langmuir adsorption isotherm model with 0.99 regression coefficient. Release of alkali and alkaline earth metal cations (Na⁺, K⁺, Ca²⁺, Mg²⁺) and protons H⁺ from MPW, during the uptake of Cu²⁺, Ni²⁺, and Zn²⁺, and EDX analysis of MPW, before and after the metal sorption process, revealed that ion exchange was the main mechanism of sorption. FTIR analysis showed that carboxyl and hydroxyl functional groups were involved in the sorption of Cu²⁺, Ni²⁺, and Zn²⁺. MPW was also shown to be highly effective in removing metal ions from the genuine electroplating industry effluent samples as it removed all the three metal ions to the permissible levels of discharge legislated by environment protection agencies. This study indicates that MPW has the potential to effectively remove metal ions from industrial effluents.     

Sorption properties of the iminodiacetate ion exchange resin,amberlite IRC‐718, toward divalent metal ions

The sorption properties of the commercially available cationic exchange resin, Amberlite IRC‐718, that has the iminodiacetic acid functionality, toward the divalent metal‐ions, Fe²⁺, Cu²⁺, Zn²⁺, and Ni²⁺ were investigated by a batch equilibration technique at 25°C as a function of contact time, metal ion concentration, mass of resin used, and pH. Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Fe²⁺ and that the metal‐ion uptake follows the order: Fe²⁺ > Cu²⁺> Zn²⁺ >Ni²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,Characterization and Ion Exchange Behavior of Polyaniline Stannic Silicomolybdate,an Organic–Inorganic Composite Material: Quantitative Separation of Pb<Superscript>2+</Superscript> Ions from Industrial Effluents

Polyaniline stannic silicomolybdate, an organic–inorganic composite material was synthesized by mixing polyaniline, an electrically conducting organic polymer into the matrices of inorganic precipitate of stannic silicomolybdate. The experimental parameters such as mixing volume ratio and pH were established for the synthesis of the material. The material was found granular, thus suitable for column operations. Polyaniline stannic silicomolybdate shows better ion exchange capacity and thermal stability. The exchanger was characterized on the basis of instrumental techniques such as FTIR, TGA, DTA XRD and SEM. The X-ray diffraction study showed semi-crystalline nature. The elution behavior of the material was also examined. The SEM micrographs show the difference in surface morphology of inorganic component and the composite material. Distribution coefficient studies were performed for different metal ions in varied solvent systems such as Triton X-100, trichloroacetic acid and acetic acid. The effect of temperature on the distribution coefficient was also studied. It was found that 40 °C appeared to be the most suitable temperature. The material was found to be selective for Pb²⁺ ion. On the basis of distribution coefficient values, some analytically important binary separations of metal ions viz. Mg²⁺–Pb²⁺, Zn²⁺–Pb²⁺, Cd²⁺–Pb²⁺ and Mg²⁺–Cu²⁺ were achieved on polyaniline stannic silicomolybdate columns. The practical utility of polyaniline stannic silicomolybdate was explored by achieving quantitative separation of Pb²⁺ in industrial waste effluents from battery manufacturing units.     

Competitive Metal Ion Binding to a Silicate-Immobilized Datura innoxia Biomaterial

Abstract

Metal ion binding with a flowing system to a biosorbent comprised of cultured cell-wall fragment within a polysilicate matrix has been investigated. Solutions containing 0.10 mM Pb²⁺, Cu²⁺, Ni²⁺, Cd²⁺, and Zn²⁺ were exposed to the material in combinations of two, three, and five metals while simultaneously monitoring the concentration of all metals in the effluent stream. A relative affinity order of Pb²⁺ > Cu²⁺ >> Zn²⁺ ≈ Cd²⁺ > Ni²⁺ was determined when all five metal ions were exposed to the material. Lower-affinity metal ions were exposed to the material sequentially. Both metal-specific and common binding sites were observed for each metal ion. The presence of both binding sites that are common to all metal ions investigated and sites that appear to be unique for each metal ion could significantly impact the utility of single-metal ion studies on the application of such biosorbents for the selective removal of metal ions from natural water.     

Synthesis and adsorption properties,toward some heavy metal ions,of a new polystyrene‐based terpyridine polymer

A novel polymeric ligand having 2,2′:6′,2″‐terpyridine as pendant group was prepared through a Williamson type etherification approach for the reaction between 4′‐hydroxy‐2,2′: 6′,2″‐terpyridine and the commercially available 4‐chloromethyl polystyrene. The chelating properties of the new polymer toward the divalent metal ions (Cu²⁺, Zn²⁺, Ni²⁺, and Pb²⁺) in aqueous solutions was studied by a batch equilibration technique as a function of contact time, pH, mass of resin, and concentration of metal ions. The amount of metal‐ion uptake of the polymer was determined by using atomic absorption spectrometry. Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Pb²⁺ and that the metal‐ion uptake follows the order: Pb²⁺ > Cu²⁺ > Zn²⁺ > Ni²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Chelation ion‐exchange study of copolymer resin derived from 8‐hydroxyquinoline 5‐sulphonic acid,oxamide, and formaldehyde

Copolymers (8‐HQ5‐SAOF) were synthesized by the condensation of 8‐hydroxyquinoline 5‐sulphonic acid (8‐HQ5‐SA) and oxamide (O) with formaldehyde (F) in the presence of acid catalyst. Four different copolymers were synthesized by using varied molar proportion of the reacting monomers. Copolymer resin composition has been determined on the basis of their elemental analysis and average molecular weights of these resins were determined by conductometric titration in nonaqueous medium. Viscometric measurement in dimethyl sulphoxide (DMSO) has been carried out with a view to ascertain the characteristic functions and constants. Electronic spectra, FTIR, and proton nuclear magnetic resonance spectra were studied to elucidate the structures. The newly synthesized copolymer proved to be a selective chelating ion‐exchange copolymer for certain metals. The chelating ion‐exchange properties of this synthesized copolymer was studied for different metal ions such as Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺. A batch equilibrium method was used in the study of the selectivity of metal ion uptake involving the measurements of the distribution of a given metal ion between the copolymer sample and a solution containing the metal ion only for representative copolymer 8‐HQ5‐SAOF‐I due to economy of space. The study was carried out over a wide pH range, shaking time, and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe³⁺, Cu²⁺, and Ni²⁺ ions than for Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ ions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Application of a Novel Hybrid Cation Exchange Material in Metal Ion Separations

A novel hybrid cation exchange material of the class of tetravalent metal acid (TMA) salt, titanium diethylene triamine pentamethylene phosphonate (TiDETPMP) has been synthesized by the sol gel method. The material has been analyzed by spectroscopy and thermal methods. Physico-chemical and ion exchange characteristics have also been studied. The distribution coefficient (K _d ) has been determined in aqueous as well as various electrolyte media/concentrations for Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ (transition metal ions) and Cd²⁺, Hg²⁺, Pb²⁺, Bi³⁺ (heavy metal ions) using TiDETPMP. Based on the differential affinity/selectivity, the breakthrough capacity (BTC) and elution behavior of various metal ions towards TiDETPMP, a few binary and ternary metal ions separations have been carried out.     

Characterization and adsorption behavior of newly synthesized sodium bis(2-ethylhexyl) sulfosuccinate–cerium (IV) phosphate (AOT–CeP) cation exchanger

A new cationic exchange material, sodium bis(2-ethylhexyl) sulfosuccinate (AOT) with cerium (IV) phosphate (AOT–CeP) has been synthesized. The characterization of the ion exchanger was performed by using infra red spectroscopy (IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermo gravimetric analysis/differential thermo gravimetric analysis (TGA/DTA/DTG) and elemental analysis. The ion exchange properties like ion exchange capacity, elution and concentration behavior of AOT–CeP were determined by taking the material into a column and elution of H⁺ was done by NaNO₃. The thermal stability of the ion exchanger was studied by determining ion exchange capacity after heating to different temperatures for one hour. The adsorption studies on AOT–CeP demonstrated that the material is selective for Cu²⁺, Pb²⁺, Cd²⁺, Zn²⁺ and Hg²⁺ ions. AOT–CeP was found to be effective for the separation of Cu²⁺, Pb²⁺, Cd²⁺, Zn²⁺ and Hg²⁺ ions in the presence of alkali metals/alkaline earth metals. This cationic exchanger was also effective for the removal of Cu²⁺, Pb²⁺, Cd²⁺, Zn²⁺ and Hg²⁺ ions in the presence of acid and other transition metal ions. Thus, AOT–CeP can be used for the removal of these ions from the waste water during its treatment.     

Fluorescence of alizarin complexone and its metal complexes

Alizarin complexone (AC) in ethanol shows two fluorescence bands which originate from the lowest excited singlet before and after proton transfer. Upon addition of various metal ions (Ni²⁺, Zn²⁺, Gd³⁺, Th⁴⁺) to AC in ethanol the formation of well known AC complexes takes place. They are characterized by intense colours which are caused by IL (or ILCT) transitions. If low-energy LF states (Ni²⁺) are absent (Zn²⁺, Gd³⁺, Th⁴⁺) these complexes show a weak fluorescence. Even in the case of Gd and Th a heavy-atom effect is not apparent and fluorescence quenching is not observed. Moreover, AC complexes are not phosphorescent under any conditions.     

Uptake of hazardous heavy metal ions by aqueous solution of poly(acrylamide) prepared through atom transfer radical polymerization process

Poly(acrylamide) (PACM) used in this study was prepared through an effective atom transfer radical polymerization process and characterized by NMR, FTIR, and thermo gravimetric analysis. Resulting polymer was used for the uptake of heavy metal ions from aqueous solution. Partition coefficient, retention capacity, and metal ion uptake behavior in aqueous solution of PACM at different monomer percent conversions and effect of parameters for optimization of polymerization reaction gives thermally stable PACM. Efficiency of metal ion uptake of different molecular weights of PACM were tested in batches for Ni²⁺, Pb²⁺, Cu²⁺, Zn²⁺, and Hg²⁺ ions in single metal solution. Metal ion sorption capacities increase with increase in polymer concentration. Metal ion sorption capacities in single metal system were 6.3 mg g^?1 Ni²⁺, 6.0 mg g^?1 Pb²⁺, 6.9 mg g^?1 Cu²⁺, 6.2 mg g^?1 Zn²⁺, 22.4 mg g^?1 Hg²⁺ for PACM of 88% conversion (Mn = 19,850). Uptake by the PACM indicates that they are effective in removing metal ions from single metal ion solutions. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Sorption behavior of ion-exchange terpolymer resin with environmental impact: synthesis,characterization and isotherm models

A novel terpolymer acts as an effective chelating ion exchanger which was synthesized using 2-amino-6-nitro-benzothiazole and semicarbazide with formaldehyde (BSF) by solution condensation technique. Its ion exchange properties was determined against certain metal ions viz. Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Pb²⁺ using batch equilibrium technique with different electrolyte concentrations, pH ranges and time intervals. The results of batch studies revealed that the separation of the selected metal ions from the aqueous solution by the terpolymer is found to be excellent compared to the available commercial resins and earlier reported resins. The order of metal ion uptake at higher concentrations by the BSF terpolymer at lower pH is Cu²⁺ > Ni²⁺ > Fe³⁺ and at lower concentration at higher pH is Zn²⁺ > Co²⁺ > Pb²⁺. The reusability of the resin was also reported for its effective ion-exchange behaviour for several cycles. The adsorption isotherm model was evaluated and the results are in good agreement with each other. The order of kinetics was also determined and the resin follows pseudo-second-order kinetics. Moreover, the physico-chemical analysis gives strong evidence for the effective metal ion removal compared with the earlier reported and commercial resins. Earlier, the structure and the properties of the synthesized novel chelating resin were clearly elucidated by elemental, FTIR, UV–Vis, ¹H & ¹³C NMR spectra, GPC, SEM and XRD.     

Synthetic resins. XX. Chelation ion exchange properties of resins derived from semicarbazone of 2-hydroxy acetophenone-substituted benzoic acid–formaldehyde

A number of resins have been synthesized by reacting orthohydroxy acetophenone-semicarbazone with substituted benzoic acid and formaldehyde in the presence of some acid and basic catalyst. The physicochemical properties of the resins have been reported. The ion exchange properties of the resins have been investigated. Influence of electrolytes on the metal uptake of Cu²⁺, Ni²⁺, Zn²⁺, Mg²⁺, and Mn²⁺ has been studied. The distribution of metal ions at different pH has also been reported. © 1992 John Wiley & Sons, Inc.     

Chelation properties of poly(β‐diketone) polymer and its oxime toward heavy metal ions

The chelation behavior of poly(β‐diketone), polymer I, and poly(β‐diketone) oxime, polymer II, toward the divalent metal ions, Cu²⁺, Zn²⁺, Ni²⁺, and Cd²⁺, and the trivalent lanthanide metal ions, La³⁺, Nd³⁺, Sm³⁺, Gd³⁺, and Tb³⁺ was investigated by a batch equilibration technique as a function of contact time, pH, and counter ion. Polymer II exhibited improved chelation characteristics toward lanthanide metal ions in comparison with polymer I and the metal‐ion uptake follows the order Tb³⁺ ≈ Gd³⁺ ≈ Sm³⁺ > Nd³⁺ ≈ La³⁺. On the other hand, polymer I showed relatively higher capacity than polymer II, toward the investigated divalent metal ions, where the metal‐ion uptake follows the order Cu²⁺ > Cd²⁺ ≈ Zn²⁺ > Ni²⁺. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Removal of Heavy Metal Ions from Water by Cross-Linked Potato Di-Starch Phosphate Polymer

Potato di-starch phosphate polymer was synthesized by cross-linking potato starch with phosphorus oxy-chloride in basic medium and was then dispersed (0.2-1%) in aqueous solutions of divalent heavy metal ions (Cu²⁺, Ni²⁺, Zn²⁺, and Pb²⁺), to investigate their removal efficiency by the starch and was found to increase with increase in the polymeric starch content and increase in the heavy metal ion concentration. The removal order was found to be Pb²⁺ (78.1%) > Cu²⁺ (58.5%) > Zn²⁺ (20.5%) > Ni²⁺ (17.3%) against the constant polymeric starch content. UV-Visible, Fluorescence, FT-IR, SEM, and CHN techniques were used for characterization of different complexes formed.     

Mechanistic elucidation and evaluation of biosorption of metal ions by grapefruit peel using FTIR spectroscopy,kinetics and isotherms modeling,cations displacement and EDX analysis

BACKGROUND: The performance and mechanism of the biosorptive removal of Ni²⁺ and Zn²⁺ from aqueous solution using grapefruit peel (GFP) as a new biosorbent was investigated by using different experimental approaches, such as potentiometric titration, Fourier transform infrared (FTIR) and energy‐dispersive X‐ray spectroscopy (EDX) analysis, chemical blocking of functional groups and concomitant release of cations (Ca²⁺, Mg²⁺, Na⁺, K⁺) from GFP with metal (Ni²⁺, Zn²⁺) uptake. RESULTS: GFP removed Ni²⁺ and Zn²⁺ rapidly, with 84.73% and 92.46% of the equilibrium sorption being reached in 30 min for Ni²⁺ and Zn²⁺, respectively. The equilibrium process was described well by the Langmuir isotherm model, with maximum sorption capacity of 1.33 and 1.51 meq g^?1 for Ni²⁺ and Zn²⁺, respectively. Release of cations (Ca²⁺, Mg²⁺, Na⁺, K⁺) and protons H⁺ from GFP during uptake of Ni²⁺ and Zn²⁺ and EDX analysis of GFP before and after metal sorption revealed that the main mechanism of sorption was ion exchange. FTIR spectroscopy showed that carboxyl and hydroxyl groups were involved in the sorption of Ni²⁺ and Zn²⁺. Blocking of these groups revealed that carboxylic group was responsible for 78.57% and 73.31% of Ni²⁺ and Zn²⁺ removal, respectively whereas 22.63% and 28.54% was due to the hydroxyl group. The GFP could be regenerated using 0.1 mol L^?1 HCl, with more than 98% metal recovery and reused for five cycles without any significant loss in its initial sorption capacity. CONCLUSIONS: The study suggests that GFP has promising potential for use as an efficient and cost‐effective biosorbent for the removal and recovery of Ni²⁺ and Zn²⁺ from aqueous solution. Copyright © 2009 Society of Chemical Industry     

Sorption characteristics of heavy metal ions by a natural zeolite

Zeolites have been shown to be effective adsorbents for the removal of heavy metals from aqueous solutions. A natural material from Cuba, containing zeolite, has been used for the removal of several metal ions, namely Cu²⁺, Zn²⁺, and Ni²⁺, to evaluate its potential use as a low‐cost adsorbent. Batch experiments have been conducted to evaluate the process kinetics and the removal equilibrium at different pH values, metal and zeolite concentrations. Pseudo‐second order kinetics and Freundlich equilibrium parameters have been obtained. Results suggested that this natural zeolite has a high potential for heavy metal retention. The selectivity of the studied metals was determined as Cu²⁺ ? Zn²⁺ > Ni²⁺, related to the first hydrolysis equilibrium constant. The metal removal efficacy was strongly dependent on pH, and to a lesser extent on metal/zeolite ratio. Copyright © 2005 Society of Chemical Industry     

Equilibrium,kinetic and isotherm of some metal ion biosorption

Trichoderma reesei was used as a biosorbent for the removal of Co²⁺, Cu²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ ions. The influence of factors such as pH, mass of biomass, contact time and temperature on biosorption efficiency was optimized. To calculate the isotherm parameters for the biosorption of Co²⁺, Cu²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ ions at optimized conditions, the experimental equilibrium data were fitted to Langmuir and Freundlich models. The calculated thermodynamic parameters, ΔG°, ΔH° and ΔS° showed that the biosorption of Co²⁺, Cu²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ ions onto T. reesei biomass was feasible, spontaneous and endothermic at the optimized conditions. The results of kinetic analysis showed that the biosorption of the selected metal ions onto T. reesei biomass obeys pseudo second order kinetics.     

Preparation and characterization of cation exchangers from agricultural residues

Cation‐exchange systems were prepared by phosphorylation of some lignocellulosic materials, namely, rice straw, cotton stalks, and bagasse. The effect of the particle size of the lignocellulosic materials as well as their chemical constituents on the phosphorylation process was studied by the determination of the phosphorus content of the prepared ion‐exchange material. Phosphorus was determined using inductively coupled plasma atomic emission spectrometry. Optimization of the phosphorylation reaction was achieved by studying the effect of the different experimental parameters, namely, the reaction time, temperature, and amount of phosphorus oxychloride added, on the phosphate content of the reaction product. The treatment of the lignocellulosic material with sodium hydroxide was found to improve its phosphorylation. The cation‐exchange efficiency of the produced phosphated material toward Cd²⁺, Co²⁺, Cr³⁺, Cu²⁺, Fe³⁺, Ni²⁺, Pb²⁺, and Zn²⁺ was examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 792–800, 2002