Tracking the effect of microspheres size on the drug release from a microsphere/sucrose acetate isobutyrate (SAIB) hybrid depot in vitro and in vivo

The effects of particle size of microspheres on the drug release from a microsphere/sucrose acetate isobutyrate (SAIB) hybrid depot (m-SAIB) was investigated to develop a long-term sustained release drug delivery system with low burst release both in vitro and in vivo. A model drug, risperidone, was first encapsulated into PLGA microspheres with different particle sizes using conventional emulsification and membrane emulsification methods. The m-SAIB was prepared by dispersing the risperidone-microspheres in the SAIB depot. The drug release from m-SAIB was double controlled by the drug diffusion from the microspheres into SAIB matrix and the drug diffusion from the SAIB matrix into the medium. Large microspheres (18.95?±?18.88?µm) prepared by the conventional homogenization method exhibited porous interior structure, which contributed to the increased drug diffusion rate from microspheres into SAIB matrix. Consequently, m-SAIB containing such microspheres showed rapid initial drug release (C_max?=_?110.1?±54.2?ng/ml) and subsequent slow drug release (C_s(4–54d)=?2.7?±?0.8?ng/ml) in vivo. Small microspheres (5.91?±?2.24?µm) showed dense interior structure with a decreased drug diffusion rate from microspheres into SAIB matrix. The initial drug release from the corresponding m-SAIB was significantly decreased (C_max?=_?40.9?±?13.7?ng/ml), whereas the drug release rate from 4 to 54 d was increased (C_s(4–54d)=4.1?±?1.0?ng/ml). By further decreasing the size of microspheres to 3.38?±?0.70?µm, the drug diffusion surface area was increased, which subsequently increased the drug release from the m-SAIB. These results demonstrate that drug release from the m-SAIB can be tailored by varying the size of microspheres to reduce the in vivo burst release of SAIB system alone.     

Study of physicochemical properties of flutamide-loaded Ocimum basilicum microspheres with ex vivo mucoadhesion and in vitro drug release

Drug which shows extensive first pass effect is difficult task that, needs to be solved by formulators in the pharmaceutical science. The low oral bioavailability (49%) of flutamide may be due to poor wettability, low aqueous solubility and extensive first pass effect. The aim of present investigation was to prepare flutamide loaded microspheres and incorporate it into suppositories for rectal delivery to avoid first pass effect and enhance residence time. Flutamide loaded mucoadhesive microspheres of Ocimum Basilicum mucilage (OBM) were prepared using spray drying and characterized by percent production yield, encapsulation efficiency, particle size, zeta potential, polydispersity index, DSC, SEM, XRPD, in vitro drug release and stability studies. Moreover, ex vivo mucoadhesion was investigated using falling liquid film technique to determine the adhesion of microspheres to sheep rectal mucosa. The microspheres had nearly spherical shape and size about 2.53?μm. The encapsulation efficiency and mucoadhesion of optimized formulation MBF10 were found to be 69.6?±?2.3% and 89.01?±?2.18%, respectively. Percent CDR of optimized flutamide loaded mucoadhesive microspheres was found to be 88.7?±?1.3 at 7?h. In conclusion, OBM microparticles based suppository could be used to deliver drug through rectal delivery.     

Self-emulsifying drug delivery system for enhanced solubility of asenapine maleate: design,characterization, in vitro,ex vivo and in vivo appraisal

Self-emulsifying drug delivery systems (SES) were developed to improve oral bioavailability of asenapine maleate (ASM), an antipsychotic drug with challenging amphiphobic nature and extensive pre-systemic metabolism. ASM-SES was prepared by choosing the proportion of oil, surfactant, co-surfactant from constructed phase diagram. The in vitro and ex vivo evaluation was done. In vivo evaluation was done through pharmacokinetic and pharmacodynamic studies. Role of lymphatic absorption was studied by lymphatic absorption inhibition study. A formulation consisting of 9.9%, 59.4%, 29.7% and 1% of oil, surfactant, co-surfactant, and drug respectively was considered as optimized formulation. After various evaluation test, the globule size and zeta potential for optimized formulation (SES₄) were found to be 137.9?nm and ?28.8?mV respectively. A maximum of 99.64?±?0.16% of ASM was released from SES₄ in 60?minutes of time. The flux (ex vivo study) increased by 2.33 folds, which prove the enhanced release and permeation of ASM when loaded into SES. The animals administered with SES₄ showed higher activity and good pharmacodynamic response than the control and ASM-Suspension, which may be due to the greater availability of the drug. The maximum pharmacodynamic response was observed at the t_max determined by Pharmacokinetic studies. The bioavailability increased by 1.64 folds with 16.55?±?3.11% as extend of lymphatic absorption (r?=?0.9732). Good in vitro in vivo correlation was observed. ASM-SES is a novel approach to effectively deliver ASM and improve the oral bioavailability.     

Chlorogenic acid stabilized nanostructured lipid carriers (NLC) of atorvastatin: formulation,design and in vivo evaluation

The present work was aimed at developing an optimized oral nanostructured lipid carrier (NLC) formulation of poorly soluble atorvastatin Ca (AT Ca) and assessing its in vitro release, oral bioavailability and pharmacodynamic activity. In this study, chlorogenic acid, a novel excipient having synergistic cholesterol lowering activity was utilized and explored in NLC formulation development. The drug-loaded NLC formulations were prepared using a high pressure homogenization technique and optimized by the Box-Behnken statistical design using the Design-Expert software. The optimized NLC formulation was composed of oleic acid and stearic acid as lipid phase (0.9% w/v), poloxamer 188 as surfactant (1% w/v) and chlorogenic acid (0.05% w/v). The mean particle size, polydispersity index (PDI) and % drug entrapment efficiency of optimized NLC were 203.56?±?8.57?nm, 0.27?±?0.028 and 83.66?±?5.69, respectively. In vitro release studies showed that the release of drug from optimized NLC formulations were markedly enhanced as compared to solid lipid nanoparticles (SLN) and drug suspension. The plasma concentration time profile of AT Ca in rats showed 3.08- and 4.89-fold increase in relative bioavailability of developed NLC with respect to marketed preparation (ATORVA® tablet) and drug suspension, respectively. Pharmacodynamic study suggested highly significant (**p?0.01) reduction in the cholesterol and triglyceride values by NLC in comparison with ATORVA® tablet. Therefore, the results of in vivo studies demonstrated promising prospects for successful oral delivery of AT Ca by means of its chlorogenic acid integrated NLC.     

Cuboidal lipid polymer nanoparticles of rosuvastatin for oral delivery

The present work aimed to develop and characterize sustained release cuboidal lipid polymeric nanoparticles (LPN) of rosuvastatin calcium (ROS) by solvent emulsification-evaporation process. A three factor, two level (2³) full-factorial design was applied to study the effect of independent variables, i.e. amount of lipid, surfactant and polymer on dependent variables, i.e. percent entrapment efficiency and particle size. Optimized formulations were further studied for zeta potential, TEM, in vitro drug release and ex vivo intestinal permeability. Cuboidal nanoparticles exhibited average particle size 61.37?±?3.95?nm, entrapment efficiency 86.77?±?1.27% and zeta potential ?6.72?±?3.25?mV. Nanoparticles were lyophilized to improve physical stability and obtain free-flowing powder. Effect of type and concentration of cryoprotectant required to lyophilize nanoparticles was optimized using freeze-thaw cycles. Mannitol as cryoprotectant in concentration of 5-8% w/v was found to be optimal providing zeta potential ?20.4?±?4.63?mV. Lyophilized nanoparticles were characterized using FTIR, DSC, XRD and SEM. Absence of C=C and C–F aromatic stretch at 1548 and 1197?cm^?1, respectively, in LPN indicated coating of drug by lipid and polymer. In vitro diffusion of ROS using dialysis bag showed pH-independent sustained release of ROS from LPN in comparison to drug suspension. Intestinal permeability by non-everted gut sac model showed prolonged release of ROS from LPN owing to adhesion of polymer to mucus layer. In vivo absorption of ROS from LPN resulted in 3.95-fold increase in AUC_0–last and 7.87-fold increase in mean residence time compared to drug suspension. Furthermore modified tyloxapol-induced rat model demonstrated the potential of ROS-loaded LPN in reducing elevated lipid profile.     

Design and optimization of gastric floating sustained-release mini-tablets of alfuzosin hydrochloride based on a factorial design: in vitro/in vivo evaluation

Abstract

The purpose of this research was to develop multiple-unit gastric floating mini-tablets and to evaluate the possibility of using these mini-tablets as a delivery system to improve the drug absorption for drugs with a narrow absorption window. Mini-tablets were prepared using hydroxypropyl methylcellulose (HPMC K100M) and carbopol 971P as release retarding agents and sodium bicarbonate (NaHCO₃) as gas-forming agent. The properties of the prepared mini-tablets in terms of floating characteristic parameters and in vitro release were evaluated. Furthermore, in vivo gastric retention study in rats and in vivo pharmacokinetic study in rabbits of the optimized formulation were performed. The optimized mini-tablets containing 45% HPMC K100M, 15% stearyl alcohol, 13% carbopol 971P, and 12% NaHCO₃ were found to float immediately within 1?min and duration more than 9?h. The in vivo gastric retention study results indicated that the mini-tablets could retain in the stomach for more than 6.67?h. Furthermore, the AUC_0?t of the floating mini-tablets (6849.83?±?753.80?h ng·mL^?1) was significantly higher than that of marketed sustained-release tablets XATRAL®XL (4970.16?±?924.60?h ng·mL^?1). All these results illustrated that the gastric floating mini-tablets might be a promising drug delivery system for drugs with a narrow absorption window.     

Fabrication of solid lipid nanoparticles of lurasidone HCl for oral delivery: optimization,in vitro characterization,cell line studies and in vivo efficacy in schizophrenia

Objective: The aim of the present investigation was to investigate the efficacy of solid lipid nanoparticles (SLNs) to enhance the absorption and bioavailability of lurasidone hydrochloride (LH) following oral administration.

Methods: The LH loaded SLNs (LH-SLNs) were prepared by high pressure homogenization (HPH) method, optimized using box Behnken design and evaluated for particle size (PS), entrapment efficiency (EE), morphology, FTIR, DSC, XRD, in vitro release, ex vivo permeation, transport studies across Caco-2 cell line and in vivo pharmacokinetic and pharmacodynamic studies.

Results: The LH-SLNs had PS of 139.8?±?5.5?nm, EE of 79.10?±?2.50% and zeta potential of ?30.8?±?3.5?mV. TEM images showed that LH-SLNs had a uniform size distribution and spherical shape. The in vitro release from LH-SLNs followed the Higuchi model. The ex vivo permeability study demonstrated enhanced drug permeation from LH-SLNs (>90%) through rat intestine as compared to LH-suspension. The SLNs were found to be taken up by energy dependent, endocytic mechanism which was mediated by clathrin/caveolae-mediated endocytosis across Caco-2 cell line. The pharmacokinetic results showed that oral bioavailability of LH was improved over 5.16-fold after incorporation into SLNs as compared to LH-suspension. The pharmacodynamic study proved the antipsychotic potential of LH-SLNs in the treatment of schizophrenia.

Conclusion: It was concluded that oral administration of LH-SLNs in rats improved the bioavailability of LH via lymphatic uptake along with improved therapeutic effect in MK-801 induced schizophrenia model in rats.     

Vitamin B12 buccoadhesive tablets: auspicious non-invasive substitute for intra muscular injection: formulation,in vitro and in vivo appraisal

Attempting to prepare a convenient bioavailable formulation of vitamin B₁₂ (cyanocobalamin), 17 tablet formulations were prepared by direct compression. Different concentrations of hydroxypropyl methyl cellulose (HPMC), carbopol 971p (CP971p), and chitosan (Cs) were used. The tablets were characterized for thickness, weight, drug content, hardness, friability, surface pH, in vitro drug release, and mucoadhesion. Kinetic analysis of the release data was conducted. Vitamin B₁₂ bioavailability from the optimized formulations was studied on rabbits by the aid of enzyme-linked immunosorbent assay. Neurotone^® I.M. injection was used for comparison. HPMC (F1-F4), CP971p (F5-F8), and HPMC/CP971p (F12-F15)-based formulations showed acceptable mechanical properties. The formulated tablets showed maximum swelling indices of 232?±?0.13. The surface pH values ranged from 5.3?±?0.03 to 6.6?±?0.02. Bioadhesive force ranged from 66?±?0.6 to 150?±?0.5?mN. Results showed that CP971p-based tablets had superior in vitro drug release, mechanical, and mucoadhesive properties. In vitro release date of selected formulations were fitted well to Peppas model. HPMC/CP971p-based formulations showed bioavailability up to 2.7-folds that of Neurotone^® I.M. injection.     

Nanosized nasal emulgel of resveratrol: preparation,optimization, in vitro evaluation and in vivo pharmacokinetic study

Abstract

Nano-emulgel has become one of the most significant controlled release systems, which has the advantages of both gels and nano-emulsions. This work aims at the formulation of nasal nano-emulgel for resveratrol, employing carbopol 934 and poloxamer 407 as the gelling agents. The optimum nano-emulsion was determined through further characterization of the selected system. The nasal nano-emulgel was prepared and tested for the in vitro release, the release kinetics, FTIR, ex vivo permeation, nasal mucosa toxicity, and in vivo pharmacokinetic study. The optimum nano-emulsion consisted of Tween 20, Capryol 90, and Transcutol at a ratio of (54.26: 23.81: 21.93%v/v), and it exhibited transmittance of 100%, resveratrol solubility of 159.9?±?6.4?mg/mL, globule size of 30.65?nm. The in vitro resveratrol released from nano-emulsion and nasal nano-emulgel was 96.17?±?4.43% and 78.53?±?4.7%, respectively. Ex vivo permeation was sustained during 12?h up to 63.95?±?4.7%. The histopathological study demonstrated that the formula is safe and tolerable to the nasal mucosa. C_max and AUC _(0–∞) of resveratrol obtained after nasal administration of nasal nano-emulgel was 2.23 and 8.05 times, respectively. Similarly, T_max was increased up to 3.67?±?0.82?h. The optimized nasal nano-emulgel established intranasal safety and bioavailability enhancement so it is considered as a well-designed system to target the brain.     

Development and evaluation of nanosized niosomal dispersion for oral delivery of Ganciclovir

Encapsulation of Ganciclovir in lipophilic vesicular structure may be expected to enhance the oral absorption and prolong the existence of the drug in the systemic circulation. So the purpose of the present study was to improve the oral bioavailability of Ganciclovir by preparing nanosized niosomal dispersion. Niosomes were prepared from Span40, Span60, and Cholesterol in the molar ratio of 1:1, 2:1, 3:1, and 3:2 using reverse evaporation method. The developed niosomal dispersions were characterized for entrapment efficiency, size, shape, in vitro drug release, release kinetic study, and in vivo performance. Optimized formulation (NG8; Span60:Cholesterol 3:2 molar ratio) has shown a significantly high encapsulation of Ganciclovir (89?±?2.13%) with vesicle size of 144?±?3.47?nm (polydispersity index [PDI]?=?0.08). The in vitro release study signifies sustained release profile of niosomal dispersions. Release profile of prepared formulations have shown that more than 85.2?±?0.015% drug was released in 24?h with zero-order release kinetics. The results obtained also revealed that the types of surfactant and Cholesterol content ratio altered the entrapment efficiency, size, and drug release rate from niosomes. In vivo study on rats reveals five-time increment in bioavailability of Ganciclovir after oral administration of optimized formulation (NG8) as compared with tablet. The effective drug concentration (>0.69 µg/mL in plasma) was also maintained for at least 8?h on administration of the niosomal formulation. In conclusion, niosomes can be proposed as a potential oral delivery system for the effective delivery of Ganciclovir.     

Preparation and in vivo safety evaluations of antileukemic homoharringtonine-loaded PEGylated liposomes

In order to improve the in vivo safety and specific delivery efficiency of the antileukemic homoharringtonine (HHT) at the targets, the long-circulating PEGylated liposomes loaded with HHT (LCLipo-HHT) were prepared. Their physical characteristics, in vitro drug release, in vivo pharmacokinetic properties and elementary toxicity were evaluated. The mean diameter of the prepared LCLipo-HHT is 75.6?±?3.2?nm and the zeta potential is ?16.9?±?2.5?mV. The entrapment efficiency of HHT in the liposomes is 69.5?±?1.7%. In pharmacokinetic experiments, an increased plasma concentration as well as blood circulation time was obtained when distearoyl phosphoethanolamine-PEG 2000 lipid was added in the formulation, which results in enhancing drug delivery efficiency. Hemolysis test, vascular irritation test and acute toxicity test were used to demonstrate toxicity of LCLipo-HHT. Compared with clinical HHT injection dosage, LCLipo-HHT indicated no vascular irritation, good hemocompatibility, as well as much better safety. Therefore, the prepared LCLipo-HHT can be used as a promising anticancer formulation for antileukemic therapy in the future.     

Formulation design and optimization of novel soft glycerosomes for enhanced topical delivery of celecoxib and cupferron by Box–Behnken statistical design

Background: The present study describes glycerosomes (vesicles composed of phospholipids, glycerol and water) as a novel drug delivery system for topical application of celecoxib (CLX) and cupferron (CUP) compound.

Aim: The goal of this research was to design topical soft innovative vesicles loaded with CLX or CUP for enhancing the efficacy and avoiding systemic toxicity of CLX and CUP.

Methods: CLX and CUP loaded glycerosomes were prepared by hydrating phospholipid-cholesterol films with glycerol aqueous solutions (20–40%, v/v). Box–Behnken design, using Design-Expert® software, was the optimum choice to statistically optimize formulation variables. Three independent variables were evaluated: phospholipid concentration (X₁), glycerol percent (X₂) and tween 80 concentration (X₃). The glycerosomes particle size (Y₁), encapsulation efficiency percent (Y₂: EE %) and drug release (Y₃) were selected as dependent variables. The anti-inflammatory effect of CLX and CUP glycerosomal gel was evaluated by carrageenan-induced rat paw edema method followed by histopathological studies.

Results: The optimized formulations (CLX2* and CUP1*) showed spherical morphology under transmission electron microscopy, optimum particle size of 195.4?±?3.67?nm, 301.2?±?1.75?nm, high EE of 89.66?±?1.73%, 93.56?±?2.87%, high drug release of 47.08?±?3.37%, 37.60?±?1.89% and high cumulative amount of drug permeated in 8?h of 900.18?±?50.24, 527.99?±?34.90?µg.cm^?2 through hairless rat skin, respectively. They also achieved significant remarkable paw edema inhibition in comparison with the control group (p? Conclusion: Finally, the administration of CLX2* and CUP1* loaded glycerosomal gel onto the skin resulted in marked reduction of edema, congestive capillary and inflammatory cells and this approach may be of value in the treatment of different inflammatory disorders.     

Development and uniform evaluation of ropinirole osmotic pump tablets with REQUIP XL both in vitro and in beagle dogs

REQUIP XL, prolonged release formulation of ropinirole hydrochloride (RH) in market, could release ropinirole constantly and showed satisfactory therapeutic effect and good compliance. REQUIP XL was composed of more than 10 kinds of excipients and prepared by Geomatrix technology, which was complex and laborious. The purpose of this study was to obtain a dosage form of RH with similar in vitro release profile and bioequivalence in vivo compared to REQUIP XL. Osmotic pump tablet combined with fast release phase was selected as the delivery system of RH and similar release curves were obtained in different media. The tablets were also administered to beagle dogs and the pharmacokinetic parameters were calculated using a non-compartmental model. C_max, t_max, mean residence time (MRT), and area under the curve from 0 to 24?h (AUC_0–24) were 3.97?±?0.53?ng/mL, 3.58?±?0.49?h, 8.29?±?0.93?h, and 35.20?±?8.11?ng/mL???h for ropinirole osmotic pump tablets (ROPT) and 4.15?±?1.07?ng/mL, 2.92?±?0.49?h, 7.84?±?1.09?h, and 34.34?±?10.06?ng/mL???h for REQUIP XL. The log-transformed mean C_max and AUC_0–24 of ROPT were about 92.15% and 102.49% relative to that of REQUIP XL, respectively. The 90% confidence intervals of C_max and AUC_0–24 for ROPT were 75.69–115.31% and 88.89–122.30%, respectively. So it could be concluded that ROPT was uniform with REQUIP XL both in vitro and in beagles and the release profiles of Geomatrix technology may be obtained by osmotic pump combined with fast release technology.     

Development,optimization, and in vitro characterization of dasatinib-loaded PEG functionalized chitosan capped gold nanoparticles using Box–Behnken experimental design

Objective: The purpose of this research study was to develop, optimize, and characterize dasatinib loaded polyethylene glycol (PEG) stabilized chitosan capped gold nanoparticles (DSB-PEG-Ch-GNPs).

Methods: Gold (III) chloride hydrate was reduced with chitosan and the resulting nanoparticles were coated with thiol-terminated PEG and loaded with dasatinib (DSB). Plackett–Burman design (PBD) followed by Box–Behnken experimental design (BBD) were employed to optimize the process parameters. Polynomial equations, contour, and 3D response surface plots were generated to relate the factors and responses. The optimized DSB-PEG-Ch-GNPs were characterized by FTIR, XRD, HR-SEM, EDX, TEM, SAED, AFM, DLS, and ZP.

Results: The results of the optimized DSB-PEG-Ch-GNPs showed particle size (PS) of 24.39?±?1.82?nm, apparent drug content (ADC) of 72.06?±?0.86%, and zeta potential (ZP) of ?13.91?±?1.21?mV. The responses observed and the predicted values of the optimized process were found to be close. The shape and surface morphology studies showed that the resulting DSB-PEG-Ch-GNPs were spherical and smooth. The stability and in vitro drug release studies confirmed that the optimized formulation was stable at different conditions of storage and exhibited a sustained drug release of the drug of up to 76% in 48?h and followed Korsmeyer–Peppas release kinetic model.

Conclusions: A process for preparing gold nanoparticles using chitosan, anchoring PEG to the particle surface, and entrapping dasatinib in the chitosan-PEG surface corona was optimized.     

Modulated release of 5-fluorouracil from pH-sensitive and colon targeted pellets: An industrially feasible approach

Pellets, reliant on pH-sensitivity and time-dependency for drug delivery, provide one of the most versatile opportunities for targeting colon. 5-Fluorouracil (5-FU) loaded pellets were prepared by extrusion-spheronization using Avicel^® PH101 as a spheronization aid and hydroxypropylmethylcellulose K4M (HPMC K4M) solution as a binder. A 3² full factorial design was employed to optimize spheronization speed and time. Obtained pellets were evaluated for flow properties, pellet size, roundness and aspect ratio. Optimized batch was coated in a bottom-spray fluidized bed processor (FBP) with an inner coat of sustained release polymer Eudragit NE30D and an outer coat of pH-sensitive polymer Eudragit FS30D. The coating levels were statistically optimized and in vitro drug release was monitored by changing pH media method. Optimized system with 15% inner and outer coating levels revealed t_50% (time required for 50% drug release) to be about 9?h while almost complete drug was released in 24?h (98.71?±?1.33%) with highest dissolution efficiency (DE_24h) of 58.71%. The optimization model was validated; the predicted and experimental/actual values for validation batch (M1) were in close tolerance and the standard error (SE) was also small. Drug release was also studied at pH 7.4. Scanning electron microscopy (SEM) demonstrated average coating thickness to be 32.50?±?3.0 µm. Hence, the present study provides constructive results for colon targeting of 5-FU pellets with industrially feasible processes.     

Improved hepatoprotective activity of silymarin via encapsulation in the novel vesicular nanosystem bilosomes

The main objective of the present work was to formulate, characterize, and evaluate silymarin (SM)-loaded bilosomes, compared to conventional liposomes, aiming at increasing the hepatoprotective activity of the drug. SM-loaded bilosomes were prepared by thin film hydration technique employing soybean phosphatidyl choline (SPC) and different bile salts. After being subjected to different methods of characterization, SM-loaded bilosomes were investigated for their hepatoprotective activity, in CCl₄ hepatointoxicated rat model. The developed SM dispersions exhibited an entrapment efficiency ranging from 21.80?±?2.01 to 84.54?±?2.51% and a particle size diameter in the nanometric dimensions (413?±?96.9 to 686.9?±?62.38?nm), with a negative zeta potential values (<–45?mV). In vitro release study revealed a lower cumulative amount of drug released from the developed formulae, compared to free drug. Ex vivo intestinal uptake study, performed using confocal laser scanning calorimetry, revealed the superiority of bilosomal uptake compared to that of liposomes. In vivo studies revealed an enhanced hepatoprotective effect of SM-loaded bilosomes/liposomes compared to free drug. These results were in good correlation with histopathological examination. These findings support the potential use of bilosomes for improving the hepatoprotective activity of SM via oral administration.     

Formulation and evaluation of thymoquinone niosomes: application of developed and validated RP-HPLC method in delivery system

Abstract

A rapid, accurate, and sensitive reverse phase high-performance liquid chromatographic (RP-HPLC) method was developed and validated for the estimation of Thymoquinone (TMQ) in API as well as in noisome. The chromatograms were developed with the mobile phase – water: 2-propanol: methanol (50:45:5 v/v/v) as a solvent system at 254?nm. The method was validated as per ICH guidelines for different parameters and the recovery of TMQ was calculated in developed niosomes. Further, TMQ loaded niosomes (TMQNIOS) were prepared and evaluated for different parameters. The optimized TMQNIOS (F3) was further evaluated for surface morphology, in vitro drug release, permeation study, and confocal laser scanning microscopic (CLSM) study. The method showed linearity range between 6.25 and 100?µg/ml with low detection limit and quantitation limit with a value of 2.08 and 6.25?µg/ml. The developed formulations showed the vesicle size and encapsulation efficiency in the range of 157.32?±?3.15 to 211.44?±?5.23?nm and 59.32?±?4.87 to 83.21?±?3.55%, respectively. The drug release result showed the significant higher release from TMQNIOS in compared to TMQDIS, and the release kinetics data showed Higuchi's equation with highest regression coefficient values. The permeation study and the confocal laser microscopy study further confirmed the enhancement in permeation of TMQ in the intestinal mucosa.     

Preparation and evaluation of self-assembly Soluplus®-sodium cholate-phospholipid ternary mixed micelles of docetaxel

Abstract

Ternary mixed micelles constituted of Soluplus^®, sodium cholate, and phospholipid were prepared as nano-delivery system of the anticancer drug, docetaxel. The formulation of docetaxel-loaded ternary mixed micelles (DTX-TMMs) with an optimized composition (Soluplus^®/sodium cholate/phospholipid= 3:2:1 by weight) were obtained. The main particle size of DTX-TMMs was 76.36?±?2.45?nm, polydispersity index (PDI) was 0.138?±?0.039, and the zeta potential was ?8.46?±?0.55?mv. The encapsulation efficiency was 94.24?±?4.30% and the drug loading was 1.25%. The critical micelle concentration value was used to assess the ability of carrier materials to form micelles. The results indicated that the addition of Soluplus^® to sodium cholate-phospholipid mixed micelles could reduce the critical micelle concentration and improve the stability. In vitro release studies demonstrated that compared with DTX-Injection group, the DTX-TMMs presented a controlled release property of drugs. In vivo pharmacodynamics results suggested that DTX-TMMs had the most effective inhibitory effect on tumor proliferation and had good biosafety. In addition, the relative bioavailability of mixed micelles was increased by 1.36 times compared with the DTX-Injection in vivo pharmacokinetic study indicated that a better therapeutic effect could be achieved. In summary, the ternary mixed micelles prepared in this study are considered to be promising anticancer drug delivery systems.     

Sildenafil vaginal suppositories: preparation,characterization, in vitro and in vivo evaluation

Aim: The main objective was to investigate the in vitro release profile/kinetics, and in vivo plasma pharmacokinetics (PK) and organ biodistribution (BD) of the prepared sildenafil vaginal suppositories (SVS).

Methods: Suppositories containing 25?mg of sildenafil were prepared by the cream melting technique using Witepsol H-15 as a suppository base. The suppositories were characterized for weight variation, content uniformity, hardness, disintegration time and crystallinity change. The in vitro dissolution in pH 4.5, and in vivo plasma PK and organ BD of sildenafil from SVS in female Sprague Dawley rats, were also investigated.

Results: The mean weight variation, content uniformity, hardness and disintegration time of the prepared SVS were 1.127?±?0.020?g, 98.25?±?2.50%, 2.5?±?0.08?kg and 9?±?1.0?min, respectively. The release of sildenafil from the SVS was more than 90% at 30?min, with a release kinetic of Hixson--Crowell model and non-Fickian diffusion (n?=?0.464). The plasma PK study demonstrated a significantly lower C_max (～10 times) and AUC_0–24?h (～13 times) of sildenafil in plasma following intravaginal (IVG) administration of suppositories compared to oral (PO) administration of sildenafil solution. Nevertheless, the organ BD study showed a phenomenally higher C_max (～40 times) and AUC_0–24?h (～20 times) of sildenafil in uterus following IVG administration of suppositories than PO administration of sildenafil solution.

Conclusion: This study demonstrated enhanced sildenafil exposure in the uterus following IVG administration of SVS, which could be used to target the uterus for therapeutic benefits.