Mucoadhesive liposomes as ocular delivery system: physical,microbiological, and in vivo assessment

Background: Mucoadhesive drug delivery is a promising strategy to overcome ocular biopharmaceutical constraints. Objective and methods: Ciprofloxacin HCl-loaded reverse phase evaporation liposomes were coated with different concentrations and molecular weights of mucoadhesive biocompatible chitosan polymer to form chitosomes. This colloidal mucoadhesive system was evaluated in vitro and in vivo with respect to deliver the antibiotic to ocular surface. Results and conclusion: The results obtained pointed out that liposome coating process resulted in entrapment efficiency reduction and higher chitosan concentration, and molecular weight showed a more pronounced effect. No morphological differences between coated and uncoated liposomes were observed. Diffusion was the drug release mechanism from chitosomes. Concerning rheological behavior, pseudoplastic flow was characteristic to the prepared chitosomal dispersions. In addition, chitosan coating improved the ocular permeation of ciprofloxacin HCl. Microbiologically; this formulated system enhanced antimicrobial activity of ciprofloxacin HCl against both Gram-positive and Gram-negative bacteria. Moreover, this mucoadhesive system was able to inhibit the growth of Pseudomonas aeruginosa in rabbits' eyes for 24 hours when compared to the marketed preparation. In vivo bacterial conjunctivitis model elucidated that symptoms were controlled by the prolonged release formulation such as that done by the marketed product.     

Sildenafil vaginal suppositories: preparation,characterization, in vitro and in vivo evaluation

Aim: The main objective was to investigate the in vitro release profile/kinetics, and in vivo plasma pharmacokinetics (PK) and organ biodistribution (BD) of the prepared sildenafil vaginal suppositories (SVS).

Methods: Suppositories containing 25?mg of sildenafil were prepared by the cream melting technique using Witepsol H-15 as a suppository base. The suppositories were characterized for weight variation, content uniformity, hardness, disintegration time and crystallinity change. The in vitro dissolution in pH 4.5, and in vivo plasma PK and organ BD of sildenafil from SVS in female Sprague Dawley rats, were also investigated.

Results: The mean weight variation, content uniformity, hardness and disintegration time of the prepared SVS were 1.127?±?0.020?g, 98.25?±?2.50%, 2.5?±?0.08?kg and 9?±?1.0?min, respectively. The release of sildenafil from the SVS was more than 90% at 30?min, with a release kinetic of Hixson--Crowell model and non-Fickian diffusion (n?=?0.464). The plasma PK study demonstrated a significantly lower C_max (～10 times) and AUC_0–24?h (～13 times) of sildenafil in plasma following intravaginal (IVG) administration of suppositories compared to oral (PO) administration of sildenafil solution. Nevertheless, the organ BD study showed a phenomenally higher C_max (～40 times) and AUC_0–24?h (～20 times) of sildenafil in uterus following IVG administration of suppositories than PO administration of sildenafil solution.

Conclusion: This study demonstrated enhanced sildenafil exposure in the uterus following IVG administration of SVS, which could be used to target the uterus for therapeutic benefits.     

Insulin nanoparticles for transdermal delivery: preparation and physicochemical characterization and in vitro evaluation

Aim: This work is aimed to study the feasibility of insulin nanoparticles for transdermal drug delivery (TDD) using supercritical antisolvent (SAS) micronization process. Methods: The influences of various experimental factors on the mean particle size (MPS) of insulin nanoparticles were investigated. Moreover, the insulin nanoparticles obtained were characterized by scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and thermogravimetric (TG) analyses. Results: Under optimum conditions, uniform spherical insulin nanoparticles with a MPS of 68.2?±?10.8 nm were obtained. The Physicochemical characterization results showed that SAS process has not induced degradation of insulin. Evaluation in vitro showed that insulin nanoparticles were accorded with the Fick's first diffusion law and had a high permeation rate. Conclusion: These results suggest that insulin nanoparticles can have a great potential in TDD systems of diabetes chemotherapy.     

Preparation and in vitro characterization of pluronic-attached polyamidoamine dendrimers for drug delivery

Context: Polyamidoamine (PAMAM) dendrimers have attracted lots of interest as drug carriers. And little study about whether pluronic-attached PAMAM dendrimers could be potential drug delivery systems has been carried on.

Objective: Pluronic F127 (PF127) attached PAMAM dendrimers were designed as novel drug carriers.

Methods: Two conjugation ratios of PF127-attached PAMAM dendrimers were synthesized. ¹H nuclear magnetic resonance (¹H-NMR), Fourier transform infrared spectrum (FTIR), element analysis and ninhydrin assay were used to characterize the conjugates. Size, zeta potential and critical micelle concentrations (CMC) were also detected. And DOX was incorporated into the hydrophobic interior of the conjugates. Studies on their drug loading and drug release were carried on. Furthermore, hemolysis and cytotoxicity assay were used to evaluate the toxicity of the conjugates.

Results and discussion: PF127 was successfully conjugated to the fifth generation PAMAM dendrimer at two molar ratios of 19% and 57% (PF127 to surface amine per PAMAM dendrimer molecular). The conjugates showed an increased size and a reduced zeta potential. And higher CMC values were obtained than pure PF127. Compared with unconjugated PAMAM dendrimer, PF127 conjugation significantly reduced the hemolytic toxicity and cytotoxicity of PAMAM dendrimer in vitro. The encapsulation results showed that the ability to encapsulate DOX by the conjugate of 19% conjugation ratio was better than that of 57% conjugation ratio. And the maximum is ～12.87 DOX molecules per conjugate molecule. Moreover, the complexes showed a sustained release behavior compared to pure DOX.

Conclusion: Findings from the in vitro study show that the PF127-attached PAMAM dendrimers may be potential carriers for drug delivery.     

Carbon nanotubes in biology and medicine: In vitro and in vivo detection, imaging and drug delivery

Carbon nanotubes exhibit many unique intrinsic physical and chemical properties and have been intensively explored for biological and biomedical applications in the past few years. In this comprehensive review, we summarize the main results from our and other groups in this field and clarify that surface functionalization is critical to the behavior of carbon nanotubes in biological systems. Ultrasensitive detection of biological species with carbon nanotubes can be realized after surface passivation to inhibit the non-specific binding of biomolecules on the hydrophobic nanotube surface. Electrical nanosensors based on nanotubes provide a label-free approach to biological detection. Surface-enhanced Raman spectroscopy of carbon nanotubes opens up a method of protein microarray with detection sensitivity down to 1 fmol/L. In vitro and in vivo toxicity studies reveal that highly water soluble and serum stable nanotubes are biocompatible, nontoxic, and potentially useful for biomedical applications. In vivo biodistributions vary with the functionalization and possibly also size of nanotubes, with a tendency to accumulate in the reticuloendothelial system (RES), including the liver and spleen, after intravenous administration. If well functionalized, nanotubes may be excreted mainly through the biliary pathway in feces. Carbon nanotube-based drug delivery has shown promise in various In vitro and in vivo experiments including delivery of small interfering RNA (siRNA), paclitaxel and doxorubicin. Moreover, single-walled carbon nanotubes with various interesting intrinsic optical properties have been used as novel photoluminescence, Raman, and photoacoustic contrast agents for imaging of cells and animals. Further multidisciplinary explorations in this field may bring new opportunities in the realm of biomedicine.      

Design,preparation, and evaluation of liposomal gel formulations for treatment of acne: in vitro and in vivo studies

The study highlights the significance of co-application of bioactive components into liposomal gel formulations and their comparison to azithromycin for treatment of Acne. A Design of Experiments (DoE) approach was utilized to obtain optimized liposomal formulation encapsulating curcumin, with size and zeta potential of ～100?nm and ～14?mV, respectively, characterized by DLS, HR-TEM, FESEM, and AFM. The curcumin liposomal dispersion depicted excellent stability over the period of 60?days, which was further converted in gel form using Carbopol. Pharmacokinetics of curcumin-loaded liposomal gel showed that T_max for curcumin was achieved within 1?h of post application in both stratum corneum and skin, indicating quick penetration of nano-sized liposomes. Stratum corneum depicted C_max of 688.3?ng/mL and AUC_0-t of 5857.5?h?×?ng/mL, while the skin samples displayed C_max of 203.3?ng/gm and AUC_0-t of 2938.1?h?×?ng/gm. Lauric acid and azithromycin liposomal gel formulations were prepared as per the optimum parameters obtained by DoE. In antibacterial activity using agar diffusion assay, lauric acid gel formulation revealed ～1.5 fold improved antibacterial effect than curcumin gel formulation. Interestingly, their co-application (1:1) exhibited significantly enhanced antibacterial effect against both macrolide-sensitive (1.81 versus 1.25 folds) and resistant strains of P. acnes (2.93 versus 1.22 folds) than their individual counterparts. The in vivo studies in rat ear model displayed a ～2 fold reduction in comedones count and cytokines (TNF-α and IL-1β) on co-application with curcumin and lauric acid liposomal gel compared to placebo treated group.     

Efficient drug delivery to lung epithelial lining fluid by aerosolization of ciprofloxacin incorporated into PEGylated liposomes for treatment of respiratory infections

Purpose: The efficacy of aerosolization of ciprofloxacin (CPFX) incorporated into PEGylated liposomes (PEGylated CPFX-liposomes) for the treatment of respiratory infections was evaluated. Method: PEGylated CPFX-liposomes with 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-n-[methoxy(polyethylene glycol)-2000] (particle size: 100 nm) were prepared, and the drug distribution characteristics in lung epithelial lining fluid (ELF) following aerosolization of PEGylated CPFX-liposomes were examined in rats. Furthermore, the antibacterial effects of PEGylated CPFX-liposomes in ELF were evaluated by pharmacokinetic/pharmacodynamic analysis. Results: The elimination rate of CPFX from ELF following aerosolization of PEGylated CPFX-liposomes was significantly slower than that of CPFX incorporated into unmodified liposomes (unmodified CPFX-liposomes; particle size: 100 nm). According to pharmacokinetic/pharmacodynamic analysis, the PEGylated CPFX-liposomes exhibited potent antibacterial effects against pathogenic microorganisms in ELF. Conclusion: This study shows that PEGylated CPFX-liposomes are a useful aerosol-based pulmonary drug delivery system for the treatment of respiratory infections.     

叶酸靶向含硼脂质体的制备及其包封率的测定

制备具有良好靶向性及包封率高的硼脂质体,为硼中子俘获治疗方法的研究与应用建立了一个有效的靶向给药途径.采用复乳法及薄膜—超声分散法制备叶酸靶向硼脂质体,利用高效液相色谱法检测4—羟基苯硼酸4—Hydroxyphenylboronicacid (HBA)脂质体、2—噻吩硼酸2—thiophenylboric acid(TBA)脂质体、4—叔丁基苯硼酸4—tert-Butylphenylboronic Acid(BBA)脂质体的含量及包封率,以包封率为评价指标,采用单因素法优化脂质体的制备处方和工艺条件.筛选出HBA、TBA、BBA最优的色谱条件,分别绘制出标准曲线,结果表明在1 ～ 100 μg/mL范围内线性关系良好.HBA、TBA、BBA脂质体在最优制备处方和工艺条件下包封率分别为25.7％、38.9％、94.8％.BBA脂质体优化后的制备处方和工艺条件如下:胆固醇与磷脂质量比为1∶1,药脂比为1∶50,pH值为7.4,按该处方工艺制备的BBA脂质体包封率在94.8％.制备叶酸靶向脂质体的优选处方和制备工艺稳定可行,质量控制方法简单、准确,包封率高.     

Preparation, evaluation, and NMR characterization of vinpocetine microemulsion for transdermal delivery

A novel microemulsion was prepared to increase the solubility and the in vitro transdermal delivery of poorly water-soluble vinpocetine. The correlation between the transdermal permeation rate and structural characteristics of vinpocetine microemulsion was investigated by pulsed field gradient nuclear magnetic resonance (PFG-NMR). For the microemulsions, oleic acid was chosen as oil phase, PEG-8 glyceryl caprylate/caprate (Labrasol®) as surfactant (S), purified diethylene glycol monoethyl ether (Transcutol P®) as cosurfactant (CoS), and the double-distilled water as water phase. Pseudo-ternary phase diagrams were constructed to obtain the concentration range of each component for the microemulsion formation. The effects of various oils and different weight ratios of surfactant to cosurfactant (S/CoS) on the solubility and permeation rate of vinpocetine were investigated. Self-diffusion coefficients were determined by PFG-NMR in order to investigate the influence of microemulsion composition with the equal drug concentration on their transdermal delivery. Finally, the microemulsion containing 1% vinpocetine was optimized with 4% oleic acid, 20.5% Labrasol, 20.5% Transcutol P, and 55% double-distilled water (w/w), in which drug solubility was about 3160-fold higher compared to that in water and the apparent permeation rate across the excised rat skin was 36.4 ± 2.1 µg/cm²/h. The physicochemical properties of the optimized microemulsion were examined for the pH, viscosity, refractive index, conductivity, and particle size distribution. The microemulsion was stable after storing more than 12 months at 25°C. The irritation study showed that the optimized microemulsion was a nonirritant transdermal delivery system.     

Preparation and in vitro evaluation of pH, time-based and enzyme-degradable pellets for colonic drug delivery

The preparation of pH-dependent, time-based and enzyme degradable pellets was investigated for use as an oral colonic drug delivery system. It was expected that drug would be released immediately once the pellets reached the colon. The pellets were prepared using extrusion-spheronizing equipment and subsequently coated with three layers of three functional polymers by an air-suspension technique. The core consisted of 5-aminosalicylic acid (5-ASA) as a model drug, CaP as an enzyme-degradable material and microcrystalline cellulose (MCC) as an additive. As far as the three coated layers were concerned, the outer layer was coated with Eudragit L30D-55 for protection against gastrointestinal juices, the intermediate layer was coated with ethylcellulose (EC) to inhibit drug release during passage through the small intestine, and the inner film was coated with pectin for swelling and enzyme-degradation, which required a 30, 10, and 12% weight gain, respectively. Several micromeritic properties of the core pellets, including particle size distribution, particle size, degree of circularity, and friability, were evaluated to investigate the effects of the formulations of the cores and preparation conditions. Also, dissolution testing of the cores showed that the presence of calcium pectinate (CaP) markedly increased the drug release rate from the cores, as determined by scanning electron microscopy (SEM). In-vitro release studies indicated that the coated pellets completely protected the drug release in 0.1 mol/L HCl, while the drug release was delayed for 3-4 hr in pH 6.8 PBS. A synergistic effect of enzyme dependence for the coated pellets was seen following removal of the coated layer and during contact with colonic enzymes. Consequently, it was possible to achieve colon-specific drug delivery using this triple-dependence system.     

Tumor-targeted polydiacetylene micelles for in vivo imaging and drug delivery

In vivo tumor targeting and drug delivery properties of small polymerized polydiacetylene (PDA) micelles (～10 nm) is investigated in a murine MDA-MB-231 xenograft model of breast cancer. Three micelles with different surface coatings are synthesized and tested for their ability to passively target tumor through the enhanced permeability and retention effect. After injection (24 h), fluorescence diffuse optical tomographic imaging indicates a tumor uptake of nearly 3% of the injected dose for the micelles with a 2 kDa poly(ethylene glycol) (PEG)-coating (PDA-PEG2000). The uptake of PDA micelles in tumors is confirmed by co-localization with [(18) F]-fluorodeoxyglucose (FDG) positron emission tomography. Although FDG has a higher diffusion rate in tumors, 40 ± 19% of the retained micelles is co-registered with the tumor volume visualized by FDG. Finally, PDA-PEG2000 micelles are loaded with the hydrophobic anticancer drug paclitaxel and used in vivo to inhibit tumor growth. These findings demonstrate the potential of PDA-PEG2000 micelles for both in vivo tumor imaging and drug delivery applications.     

Temperature-responsive, Pluronic-g-poly(acrylic acid) copolymers in situ gels for ophthalmic drug delivery: rheology, in vitro drug release, and in vivo resident property

To prolong the precorneal resident time and improve ocular bioavailability of the drug, Pluronic-g-poly(acrylic acid) copolymers were studied as a temperature-responsive in situ gelling vehicle for an ophthalmic drug delivery system. The rheological properties and in vitro drug release of Pluronic-g-PAA copolymer gels, as well as the in vivo resident properties of such in situ gel ophthalmic formulations, were investigated. The rheogram and in vitro drug release studies indicated that the drug release rates decreased as acrylic acid/Pluronic molar ratio and copolymer solution concentration increased. It was also shown that the drug concentration had no obvious effect on drug release. The release rates of drug from such copolymer gels were mainly dependent on the gel dissolution. In vivo resident experiments showed the drug resident time and the total resident amount increased by 4-fold and 1.2-fold for in situ gel compared with eye drops. These in vivo experimental results, along with the rheological properties and in vitro drug release studies, demonstrated that in situ gels containing Pluronic-g-PAA copolymer may significantly prolong the drug resident time and thus improve bioavailability. The results showed that the Pluronic-g-PAA copolymer can be a promising in situ gelling vehicle for ophthalmic drug delivery.     

Brucine-loaded liposomes composed of HSPC and DPPC at different ratios: in vitro and in vivo evaluation

Objective: The objective of this study is to test the hypothesis that the phase transition temperature (T_m), the main property of liposomes, can be easily controlled by changing the molar ratio of hydrogenated soy phosphatidylcholine (HSPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphacholine (DPPC) after drug encapsulation.

Materials and methods: Brucine, an antitumor alkaloid, was encapsulated into the liposomes with different HSPC/DPPC compositions. The T_ms of the brucine-loaded liposomes (BLs) were determined by differential scanning calorimetry (DSC). Then the physicochemical properties and pharmacokinetics of the BLs with different HSPC/DPPC compositions were investigated and compared.

Results: The results of DSC revealed that HSPC and DPPC can combine into one phase. The findings of molecular modeling study suggested that HSPC interacts with DPPC via electrostatic interaction. The molar ratio of HSPC/DPPC influenced the sizes of BLs but had little effect on the entrapment efficiency (EE). The stability of BLs was improved with the increase of the HSPC ratios, especially with the presence of plasma. Following i.v. administration, it was found that AUC values of BLs in vivo were directly related to the HSPC/DPPC ratios of BLs, namely the T_ms of BLs.

Discussion: The behavior of liposomes, especially in vivo pharmacokinetic behavior, can be controlled by the modification of T_m.

Conclusion: The characterization of BLs in vitro and in vivo had demonstrated that the T_m could be flexibly modified for liposomes composed of both HSPC and DPPC. Using HSPC/DPPC composition may be an efficient strategy to control the T_m, thus control the in vivo pharmacokinetic behavio, of BLs.     

Rapid delivery of drug carriers propelled and navigated by catalytic nanoshuttles

This paper reports the first proof-of-concept of using catalytic nanoshuttles to pick up, transport, and release common drug carriers including biocompatible and biodegradable polymeric particles and liposomes. The rapid transport of a wide size range of drug-loaded particles (100 nm-3.0 μm) with a speed approximately three orders of magnitude faster than that of the particles transported by Brownian motion demonstrates the high propulsion power of the nanoshuttles. The nanoshuttles' navigation ability is illustrated by the transport of the drug carriers through a microchannel from the pick-up to the release microwell. Such ability of nanomotors to rapidly deliver drug-loaded polymeric particles and liposomes to their target destination represents a novel approach towards transporting drug carriers in a target-specific manner. This also potentially addresses the obstacles of current nanoparticle drug delivery, such as off-targeting of particles. While an initial concept of actively transporting therapeutic particles is demonstrated in vitro in this paper, future efforts will focus on practical in vivo motor-based targeted drug delivery in connection to fuel-free nanovehicles.     

Magnetoresponsive on-demand release of hybrid liposomes formed from Fe3 O4 nanoparticles and thermosensitive block copolymers

A new approach to control the release of encapsulated materials from liposomes by using thermosensitive block copolymers and magnetic nanoparticles is reported. Hydrophobized Fe(3) O(4) nanoparticles are synthesized via the hydrothermal process, and can be incorporated into liposomal membranes by hydrophobic interactions. Thermosensitive block copolymers of (2-ethoxy)ethoxyethyl vinyl ether (EOEOVE) and octadecyl vinyl ether (ODVE) are synthesized by living cationic polymerization. The poly(EOEOVE) block acts as a temperature-sensitive moiety, and the poly(ODVE) block acts as an anchor unit. Hybrid liposomes encapsulating pyranine, a water-soluble fluorescent dye, are prepared from mixtures of phospholipids, the hydrophobized Fe(3) O(4) nanoparticles, and the copolymer. While the hybrid liposomes released negligible amounts of pyranine under static conditions, the release of pyranine is drastically enhanced by alternating magnetic field irradiation. The magnetically induced release is attributed to the transition of the thermosensitive segment of the copolymer, which is caused by the release of localized heat from the Fe(3) O(4) nanoparticles under magnetic stimuli, rather than the rupture of the capsules. The release rate of the hybrid capsules is controlled by varying the amount of Fe(3) O(4) nanoparticles embedded into the liposomes.     

Beclomethasone-loaded lipidic nanocarriers for pulmonary drug delivery: preparation, characterization and in vitro drug release

The purpose of this research paper was the development of lipid nanoparticles (LN) formulation suitable for beclomethasone dipropionate (BDP) administration via the pulmonary route. Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) were prepared by high-shear homogenization method; the effects of process and formulation parameters on nanoparticles characteristics were investigated. LN were characterized in terms of morphology, size, encapsulation efficiency, in vitro drug release and aerosol aerodynamic properties. Nano-sized BDP-loaded LN with high entrapment efficiency values reaching 99% were successfully obtained. Application of in vitro drug release data to the Higuchi kinetic equation indicated a diffusion-controlled release from the lipidic matrix. Aerosolisation and subsequent cascade impaction measurements proved that SLN and NLC were efficiently nebulized yielding aerosols of a suitable particle size for BDP deep lung delivery. Results demonstrate that LN are promising nebulized carriers for BDP opening the way for lipophilic drug-targeting strategies by nebulization.     

Transfersomes--a novel vesicular carrier for enhanced transdermal delivery: development, characterization, and performance evaluation

This work describes the use of a novel vesicular drug carrier system called transfersomes, which is composed of phospholipid, surfactant, and water for enhanced transdermal delivery. The transfersomal system was much more efficient at delivering a low and high molecular weight drug to the skin in terms of quantity and depth. In the present study transfersomes and liposomes were prepared by using dexamethasone as a model drug. The system was evaluated in vitro for vesicle shape and size, entrapment efficiency, degree of deformability, number of vesicles per cubic mm, and drug diffusion across the artificial membrane and rat skin. The effects of surfactant type, composition, charge, and concentration of surfactant were studied. The in vivo performance of selected formulation was evaluated by using a carrageenan-induced rat paw edema model. Fluorescence microscopy by using rhodamine-123 and 6-carboxyfluorescein as fluorescence probe was performed. The stability study was performed at 4°C and 37°C. An in vitro drug release study has shown a nearly zero order release of drug and no lag phase. The absence of lag phase in comparison to liposomes and ointment is attributed to the greater deformability, which may account for better skin permeability of transfersomes. In vivo studies of transfersomes showed better antiedema activity in comparison to liposomes and ointment, indicating better permeation through the penetration barrier of the skin. This was further confirmed through a fluorescence microscopy study. Finally, it may be concluded from the study that complex lipid molecules, transfersomes, can increase the transdermal flux, prolong the release, and improve the site specificity of bioactive molecules.     

Otic drug delivery systems: formulation principles and recent developments

Disorders of the ear severely impact the quality of life of millions of people, but the treatment of these disorders is an ongoing, but often overlooked challenge particularly in terms of formulation design and product development. The prevalence of ear disorders has spurred significant efforts to develop new therapeutic agents, but perhaps less innovation has been applied to new drug delivery systems to improve the efficacy of ear disease treatments. This review provides a brief overview of physiology, major diseases, and current therapies used via the otic route of administration. The primary focuses are on the various administration routes and their formulation principles. The article also presents recent advances in otic drug deliveries as well as potential limitations. Otic drug delivery technology will likely evolve in the next decade and more efficient or specific treatments for ear disease will arise from the development of less invasive drug delivery methods, safe and highly controlled drug delivery systems, and biotechnology targeting therapies.     

Positively and negatively charged liposomes as carriers for transdermal delivery of sumatriptan: in vitro characterization

Background: The influence of liposome composition, lamellarity, preparation method, and charge on the encapsulation efficiency, size, polydispersity, and surface charge of sumatriptan liposomes was studied. For this purpose, we studied multilamellar, unilamellar, and frozen and thawed liposomes. Positively or negatively charged liposomes were obtained using both phosphatidylcholine and cholesterol, in combination with stearylamine or dicetylphosphate. Liposomal formulations were characterized by confocal laser scanning microscopy and optical microscopy for vesicle formation, morphology, and lamellarity by dynamic laser light scattering for size distribution and polydispersity, and electrophoretic mobility for zeta potential determination. To obtain more information about the sumatriptan encapsulation, dynamic dialysis technique was employed. The sumatriptan amount was quantified by high-performance liquid chromatography. Results: Overall obtained results showed that liposomes may be interesting carriers for sumatriptan succinate. Statistical analysis evidenced that the preparation method does not affect the evaluated characterization parameters. However, the presence of charge inducer agents modified these characteristics. Highest loading efficiency of sumatriptan was exhibited for positively charged liposomes containing 6.58:10.34:3.73 mmolar ratio for phosphatidylcholine : cholesterol : stearylamine. The mean size was affected by the charge inducer, being smaller in positively charged liposomes. Logically, surface charge of liposomes varied as a function of the employed charged agent. Also, interesting results were obtained when vesicles were loaded with sumatriptan, showing a statistical significance between all pairs, comparing the formulations with and without drug. Conclusion: Results obtained revealed that the presence of sumatriptan into the vesicles has a different behavior in negatively and positively charged liposomes.     

Biodegradable microparticulates of beta-estradiol: preparation and in vitro characterization

Beta-estradiol has been recommended for the long-term therapy of osteoporosis and its oral formulations are subjected to intensive first pass metabolism. The present investigation was aimed at preparing and characterizing biodegradable microparticles of beta-estradiol with polymers such as PLA, PLGA 85/15, PLGA 75/25, and their mixtures. The microparticles were prepared by solvent evaporation method using methylene chloride as a solvent and polyvinyl alcohol as a surfactant. The drug-polymer ratios were 1:3, 1:5, and 1:7. The prepared microparticles (twelve formulations) were tested for encapsulation efficiency and in vitro drug release in 50% methyl alcohol/phosphate buffer pH 7.4. The results showed that the encapsulation efficiency varied from 81 to 100% and the formulation fabricated from PLGA 85/15 (1:3) showed less burst and consistent long time release. This formulation when further characterized displayed irregular spherical shape with an average particle size of 72 µm. The crystallinity of the drug was reduced when investigated using X-ray diffractometry. No chemical interaction between the drug and the polymer was observed as evidenced by FT-IR analysis. The results indicated that beta-estradiol biodegradable microparticles with PLGA 85/15 (1:3) could be a suitable approach for long term therapy of osteoporosis.