Effect of Soybean Lecithin on Iron‐Catalyzed or Chlorophyll‐Photosensitized Oxidation of Canola Oil Emulsion

The effect of soybean lecithin addition on the iron‐catalyzed or chlorophyll‐photosensitized oxidation of emulsions consisting of purified canola oil and water (1:1, w/w) was studied based on headspace oxygen consumption using gas chromatography and hydroperoxide production using the ferric thiocyanate method. Addition levels of iron sulfate, chlorophyll, and soybean lecithin were 5, 4, and 350 mg/kg, respectively. Phospholipids (PLs) during oxidation of the emulsions were monitored by high performance liquid chromatography. Addition of soybean lecithin to the emulsions significantly reduced and decelerated iron‐catalyzed oil oxidation by lowering headspace oxygen consumption and hydroperoxide production. However, soybean lecithin had no significant antioxidant effect on chlorophyll‐photosensitized oxidation of the emulsions. PLs in soybean lecithin added to the emulsions were degraded during both oxidation processes, although there was little change in PL composition. Among PLs in soybean lecithin, phosphatidylethanolamine and phosphatidylinositol were degraded the fastest in the iron‐catalyzed and the chlorophyll‐photosensitized oxidation, respectively. The results suggest that addition of soybean lecithin as an emulsifier can also improve the oxidative stability of oil in an emulsion.     

Effects of solubility characteristics of sensitiser and pH on the photooxidation of oil in tuna oil-added acidic O/W emulsions

The effects of sensitisers and pH on the oil oxidation of acidic O/W emulsions were studied under light by measuring hydroperoxide content and headspace oxygen consumption in the emulsions. The emulsions consisted of canola and tuna oil (2:1 w/w, 32%), diluted acetic acid (64%), egg yolk powder (4%), chlorophyll b or erythrosine (5 μM), and/or diazabicyclooctane (DABCO) or sodium azide (0.5 M). The emulsion pH values were 2.67, 3.68, and 6.27. Chlorophyll increased oil oxidation in the emulsion under light via singlet oxygen production while erythrosine did not. DABCO significantly decreased photooxidation of the oil containing chlorophyll, suggesting singlet oxygen involvement. However, sodium azide increased photooxidation of the oil containing chlorophyll possibly via azide radical production under acidic conditions. The oil photooxidation was higher in the emulsion containing chlorophyll at pH 6.27 than at pH 2.67 or 3.68, primarily by singlet oxygen and secondarily by free radicals produced from hydroperoxide decomposition.     

Oxidative stability of fish oil‐in‐water emulsions under high‐pressure treatment

Over the last decade, high‐pressure treatment has been of considerable interest as an alternative to thermal treatment for food preservation and processing. The impact of high‐pressure treatment on lipid oxidation in fish oil‐in‐water emulsions stabilised by 0.5 wt% whey protein isolate or sodium caseinate was investigated by determining thiobarbituric acid (TBA), propanal values and hydroperoxide values (PVs). The TBA value and the PV of all emulsions increased with increasing pressure at low temperature, indicating that lipid oxidation was promoted by high‐pressure treatment. The impact of high‐pressure treatment on the oxidative stability of lipids was increased when the temperature was increased as the TBA and propanal values were markedly enhanced by high pressure at high temperature. However, high‐pressure treatment did not affect the antioxidant properties of whey protein isolate and sodium caseinate in the fish oil‐in‐water emulsions, which may suggest that high‐pressure treatment does not alter the lipid oxidation pathway in emulsion systems. The promotion of lipid oxidation by high pressure is due mainly to increasing the pressure on a gas reaction shifts the position of equilibrium towards the side with fewer gas molecules.     

Taste perception and purchase intent of oil‐in‐water spreads: effects of oil types and salt (NaCl or KCl) concentrations

Associations of sodium intake with heart‐related problems are creating awareness towards reducing sodium. Potassium chloride (KCl), a substitute for sodium chloride (NaCl), has the disadvantage of imparting bitterness at high concentrations. We evaluated physical characteristics, taste perception and purchase intent of KCl and NaCl in oil‐in‐water spreads/emulsions composed by olive, rice bran and soya bean oils. Consumers (N = 300) evaluated saltiness/bitterness of emulsions prepared with 65% oil, and NaCl (0.5% and 1.0%) or KCl (0.75% and 1.5%). Olive oil spreads (104.07–107.43 Pa s) had higher viscosity compared to other spreads (59.16–74.96 Pa s). Type of oil had significant effects on bitterness, overall taste liking and viscosity. Taste liking decreased due to bitterness of olive oil spreads (mean drop=1.72–2.43). Purchase intent was positively associated with saltiness and pH and increased with oil claims (increase = 1.3%–22.1%) compared to sodium claims (increase = 0.0%–12.9%). These findings are useful for understanding taste perception of emulsions.     

Formulation of monodisperse oil‐in‐water emulsions loaded with ergocalciferol and cholecalciferol by microchannel emulsification: insights of production characteristics and stability

Nutritional deficiencies of ergocalciferol (VD₂) and cholecalciferol (VD₃) cause skeletal deformations. The primary aim of this study was to encapsulate VD₂ and VD₃ in food‐grade oil‐in‐water (O/W) emulsions by using microchannel emulsification (MCE). Silicon asymmetric straight‐through microchannel (MC) array consisting of 10 313 channels, each having an 11 × 104 μm microslot connected to a 10 μm circular microholes. 1% (w/w) sodium cholate or Tween 20 in water was used as the continuous phase, while 0.5% (w/w) of each VD₂ and VD₃ in different oils served as the dispersed phase. Monodisperse O/W emulsions with Sauter mean diameters of 28 to 32 μm and relative span factor widths below 0.3 were formulated via an asymmetric straight‐through MC array under appropriate operating conditions. The monodisperse O/W emulsions stabilised with Tween 20 remained stable for >30 days with encapsulation efficiencies (EEs) of VD₂ and VD₃ of above 70% at 4 and 25 °C. In contrast, those stabilised with sodium cholate had stability of >30 days with their EEs of over 70% only at 25 °C.     

Iron‐mediated lipid oxidation in 70% fish oil‐in‐water emulsions: effect of emulsifier type and pH

The objective of this study was to investigate the protective effect of five different emulsifiers on iron‐mediated lipid oxidation in 70% fish oil‐in‐water emulsions. The emulsifiers were either based on protein (whey protein isolate and sodium caseinate) or based on phospholipid (soy lecithin and two milk phospholipids with different phospholipid contents, MPL20 and MPL75). Lipid oxidation was studied at pH 4.5 and 7.0, and results were compared to lipid oxidation in neat fish oil. Results showed that all emulsions oxidised more than neat oil. Furthermore, emulsions prepared with proteins oxidised more at low pH than at high pH, and casein emulsions oxidised the least (Peroxide value (PV) at day 7 was 0.5–0.7 meq kg^?1). Among emulsions prepared with phospholipids, emulsions with MPL75 were the most oxidised followed by emulsions prepared with lecithin and MPL20. Thus, PV in MPL75 emulsions was 5.0–5.5 meq kg^?1 at day 7 compared with 0.9–1.9 meq kg^?1 in MPL20 emulsions.     

Antioxidant Properties of Aqueous Extract of Roasted Hulled Barley in Bulk Oil or Oil‐in‐Water Emulsion Matrix

Antioxidant properties of the aqueous extracts of hulled barley (Hordeum vulgare L.) that had been roasted at 210 °C for 20 min were determined in bulk oil and oil‐in‐water (O/W) emulsions. Bulk oils were heated at 60, 100, and 180 °C, and O/W emulsions were oxidized under riboflavin photosensitization. The content of phenolic compounds was analyzed by high‐performance liquid chromatography, and in vitro antioxidant assays were also conducted. The major phenolics contained in the aqueous extract of roasted hulled barley (AERB) were p‐coumaric, ferulic, protocatechuic, chlorogenic, 4‐hydroxybenzoic, and vanillic acids. Depending on the concentration and oxidation temperature, AERB had antioxidant or prooxidant properties in bulk oil. At 60 °C, AERB at a concentration of 0.5% acted as a prooxidant, whereas at 1.0% it acted as an antioxidant. At 100 °C, AERB acted as an antioxidant irrespective of concentration. In 180 °C conditions, 0.5% AERB acted as a prooxidant, whereas other concentrations of AERB acted as antioxidants. In the case of riboflavin photosensitized O/W emulsions, AERB showed antioxidant properties irrespective of concentration. Antioxidant abilities of AERB are affected by the food matrix, including bulk oil and O/W emulsions, and concentrations of AERB, even though diverse phenolic compounds may display high antioxidant properties in in vitro assays.     

Oil Bodies Extracted from High‐Fat and Low‐Fat Soybeans: Stability and Composition During Storage

Soybeans contain oil bodies (OBs) that encapsulate triacylglycerols (TAGs) with a phospholipid monolayer carrying scattered proteins. In nature, soybean OBs can form natural emulsions in aqueous media and may serve as natural, minimally processed, stable, and pre‐emulsified oil for addition into appropriate food systems. In this study, OBs were obtained by aqueous extraction from the mature seeds of 2 soybean crop cultivars, high‐fat soybean and low‐fat soybeans. The compositions of the extracted OBs were analyzed during storage at room temperature up to 14 d (pH = 7). The oxidative stability of these OBs, stored at 60 °C, was evaluated by measuring the presence of primary (lipid hydroperoxides) and secondary lipid oxidation products (malondialdehyde) by determining the standard peroxide value (PV) and thiobarbituric acid‐reactive substances (TBARS) value. During storage, the contents of unsaturated fatty acids, phospholipids, and tocopherols declined in both OBs, while their mean particle diameters (d₃₂) and ζ‐potentials increased. The changes in PV and TBARS values exhibited a similar trend for both OBs, but the OBs from low‐fat soybeans had significantly lower PV and higher TBARS values than the OBs from high‐fat soybean cultivars (P < 0.05). Overall, the OBs from both soybean cultivars had good stability during storage.     

Alginate‐Based Emulsion Template Containing High Oil Loading Stabilized by Nonionic Surfactants

Oil‐in‐water (O/W) emulsion‐gel systems containing high oil payloads are of increasing interest for food applications because of the reduction in encapsulation cost, consumption frequency or volume of food products. This study shows a facile approach to prepare stable alginate‐based O/W emulsions at high oil loading using a mixture of nonionic surfactants (Tween 80 and Span 20) as a template to form gelled‐emulsions. The synergistic effects of alginate and surfactants on the O/W emulsion properties were evaluated in terms of oil droplet size and emulsion stability. At 2% (w/v) of alginate and 1% (w/v) of surfactants, the size distribution of oil droplets was narrow and monomodal, even at an oil loading of 70% (v/v). The emulsions formed were stable against phase separation. The oil droplet size could be further reduced to below 1 μm using a high‐shear homogenizer. The emulsions formed could be easily molded and gelled into solids of different shapes via ionic gelation. The findings of this study create possible avenues for applications in food industries.     

Insect‐Resistant Food Packaging Film Development Using Cinnamon Oil and Microencapsulation Technologies

Insect‐resistant films containing a microencapsulated insect‐repelling agent were developed to protect food products from the Indian meal moth (Plodia interpunctella). Cinnamon oil (CO), an insect repelling agent, was encapsulated with gum arabic, whey protein isolate (WPI)/maltodextrin (MD), or poly(vinyl alcohol) (PVA). A low‐density polyethylene (LDPE) film was coated with an ink or a polypropylene (PP) solution that incorporated the microcapsules. The encapsulation efficiency values obtained with gum arabic, WPI/MD, and PVA were 90.4%, 94.6%, and 80.7%, respectively. The films containing a microcapsule emulsion of PVA and CO or incorporating a microcapsule powder of WPI/MD and CO were the most effective (P < 0.05) at repelling moth larvae. The release rate of cinnamaldehyde, an active repellent of cinnamaldehyde, in the PP was 23 times lower when cinnamaldehyde was microencapsulated. Coating with the microcapsules did not alter the tensile properties of the films. The invasion of larvae into cookies was prevented by the insect‐repellent films, demonstrating potential for the films in insect‐resistant packaging for food products. Practical Application : The insect‐repelling effect of cinnamon oil incorporated into LDPE films was more effective with microencapsulation. The system developed in this research with LDPE film may also be extended to other food‐packaging films where the same coating platform can be used. This platform is interchangeable and easy to use for the delivery of insect‐repelling agents. The films can protect a wide variety of food products from invasion by the Indian meal moth.     

Tuna oil and Mentha piperita oil emulsions and microcapsules stabilised by whey protein isolate and inulin: characterisation and stability

Whey protein isolate (WPI) and its polysaccharide complexes have been widely used to prepare oil‐in‐water emulsions. The aim of this study was to evaluate the emulsions and spray‐dried microcapsules containing tuna oil and/or mint oil and stabilised by combination of WPI with inulin in terms of physicochemical characteristics and storage stability. Stable emulsions were formed before drying. Tuna oil + Mentha piperita oil emulsions had smaller viscosity, surface tension and size than did tuna oil emulsions. Surface morphology showed that spray‐dried microcapsules were spheres but had many dents and apparent shrinkage. During storage, tuna oil and tuna oil + M. piperita oil microcapsules became larger. In the blend oil microcapsules, menthone was reduced to form menthol, loss of DHA and EPA was slightly less, the degree of oxidation characterised using peroxide value and headspace propanal was less but basically greater than half of that of WTI microcapsules.     

Role of physical structures in bulk oils on lipid oxidation

Lipid oxidation is important to food manufacturers especially when they increase unsaturated lipids in their products to improve nutritional profiles. Unfortunately, the number of antioxidants available to food manufacturers to control oxidative rancidity is limited and the approval of new antioxidants is unlikely due to economic barriers in obtaining government approval for new food additives. Therefore, new antioxidant technologies are needed for food oils. This paper reviews the current knowledge of lipid oxidation in foods with emphasis on how physical properties of food systems impact oxidation chemistry. In particular, the role of association colloids in bulk oils on lipid oxidation chemistry is discussed in an attempt to understand mechanisms of oxidation. Increasing the understanding of how physical properties impact lipid oxidation could lead to the development of novel antioxidant technologies that not only protect the oil against oxidation and increase shelf-life but also allow food manufacturers to include more nutritionally beneficial fatty acids in their products.     

Effects of Green Tea Extract and α‐Tocopherol on the Lipid Oxidation Rate of Omega‐3 Oils,Incorporated into Table Spreads,Prepared using Multiple Emulsion Technology

Abstract: This study examined the effectiveness of fat and water soluble antioxidants on the oxidative stability of omega (ω)‐3 rich table spreads, produced using novel multiple emulsion technology. Table spreads were produced by dispersing an oil‐in‐water (O/W) emulsion (500 g/kg 85 camelina/15 fish oil blend) in a hardstock/rapeseed oil blend, using sodium caseinate and polyglycerol polyricinoleate as emulsifiers. The O/W and oil‐in‐water‐in‐oil (O/W/O) emulsions contained either a water soluble antioxidant (green tea extract [GTE]), an oil soluble antioxidant (α‐Tocopherol), or both. Spreads containing α‐Tocopherol had the highest lipid hydroperoxide values, whereas spreads containing GTE had the lowest (P < 0.05), during storage at 5 °C, while p‐Anisidine values did not differ significantly. Particle size was generally unaffected by antioxidant type (P < 0.05). Double emulsion (O/W/O) structures were clearly seen in confocal images of the spreads. By the end of storage, none of the spreads had significantly different G′ values. Firmness (Newtons) of all spreads generally increased during storage (P < 0.05). Practical Application: Lipid oxidation is a major problem in omega‐3 rich oils, and can cause off‐odors and off‐flavors. Double emulsion technology was used to produce omega‐3 enriched spreads (O/W/O emulsions), wherein the omega‐3 oil was incorporated into the inner oil phase, to protect it from lipid oxidation. Antioxidants were added to further protect the spreads by reducing lipid oxidation. Spreads produced had good oxidative stability and possessed functional (omega‐3 addition) properties.     

Inhibition of Ostwald ripening in model beverage emulsions by addition of poorly water soluble triglyceride oils

Beverage emulsions containing flavor oils that have a relatively high water-solubility are unstable to droplet growth due to Ostwald ripening. The aim of this study was to improve the stability of model beverage emulsions to this kind of droplet growth by incorporating poorly water-soluble triglyceride oils. High pressure homogenization was used to prepare a series of 5 wt% oil-in-water emulsions stabilized by modified starch that had different lipid phase compositions (orange oil : corn oil). Emulsions prepared using only orange oil as the lipid phase were highly unstable to droplet growth during storage, which was attributed to Ostwald ripening resulting from the relatively high water-solubility of orange oil. Droplet growth could be effectively inhibited by incorporating ≥ 10% corn oil into the lipid phase prior to homogenization. In addition, creaming was also retarded because the lipid phase density was closer to that of the aqueous phase density. These results illustrate a simple method of improving the physical stability of orange oil emulsions for utilization in the food, beverage, and fragrance industries.     

Effects of Fatty Acid Composition and β‐Carotene on the Chlorophyll Photosensitized Oxidation of W/O Emulsion Affected by Phosphatidylcholine

Abstract: Chlorophyll photosensitized oxidation of W/O emulsion consisting of oils with different fatty acid composition was studied and β‐carotene effects on the singlet oxygen oxidation affected by phosphatidylcholine were evaluated by determining peroxide value (PV) and conjugated dienoic acid (CDA) contents. An emulsion was composed of purified oil (sunflower, soybean, canola, or olive oil), water, and xanthan gum (50:50:0.35, w/w/w) with addition of phosphatidylcholine (0 or 250 ppm) and β‐carotene (0, 1, 5, or 10 ppm). PV and CDA content of oil in the emulsion were increased with time under chlorophyll photosensitized oxidation, and the oxidation rate was higher in the emulsion consisting of sunflower or soybean oil whose polyunsaturated fatty acids content was high compared to canola or olive oil. Addition of β‐carotene to the emulsion significantly decreased the oil oxidation under chlorophyll photosensitization, however, co‐addition of phosphatidylcholine decreased the antioxidant activity of β‐carotene, suggesting an antagonistic antioxidation between them. Practical Application: The results of this study can be applied to the area of emulsion foods such as salad dressing to have improved texture and stability by decreasing the oil oxidation and providing desirable color by use of β‐carotene with phosphatidylcholine as emulsifier.     

巴氏灭菌对不同油脂体乳液氧化稳定性的影响

为探究巴氏灭菌对大豆、葵花、花生、芝麻和核桃油脂体乳液氧化稳定性的影响,本研究测定不同油脂体的基本组成、相关蛋白组成、脂肪酸组成和相对含量,然后利用动态光散射、激光共聚焦显微镜等研究巴氏灭菌（85 ℃加热10 min）对油脂体乳液物理稳定性和氧化稳定性的影响。结果表明：不同油脂体的基本组成、相关蛋白组成和脂肪酸组成存在明显差异,油脂体相关蛋白由内源膜蛋白和外源蛋白组成,油脂体脂肪酸以不饱和脂肪酸为主,其中油酸、亚油酸和α-亚麻酸是主要的不饱和脂肪酸。5 种不同原料油脂体中,大豆油脂体蛋白质量分数和水分质量分数最高,而油脂质量分数最低;花生油脂体总饱和脂肪酸相对含量（21.27%）最高,核桃油脂体总不饱和脂肪酸相对含量（90.10%）最高。巴氏灭菌可显著改善大豆和花生油脂体乳液氧化稳定性,而对葵花、芝麻和核桃油脂体乳液起促进氧化作用。本研究可为油脂体在沙拉酱、植物奶等产品应用提供参考。     

Possibility of improving the quality characteristics of olive‐pomace oil and enhancing its differentiation from refined olive‐pomace oil

An investigation was carried out to evaluate the oxidative and hydrolytic degradation of 37 olive‐pomace oils marketed in southern Italy and to compare the results with those obtained from 10 deodorised olive‐pomace oils representative of large stocks of oil obtained after the final step of refining. One aim of the research was to ascertain the quality characteristics of commercial olive‐pomace oils; another was to verify whether the legally prescribed addition of virgin olive oil to refined pomace oil, so that the final product may be classified commercially as olive‐pomace oil, was actually sufficient to justify upgrading. The analytical methods used were silica gel column chromatography and high‐performance size exclusion chromatography. The data obtained showed that the final retail olive‐pomace oils had a lower degree of oxidative degradation than the refined oils, as indicated by the lower values obtained when summing the proportions of triglyceride oligopolymers and oxidised triglycerides. Conversely, hydrolytic degradation, which was evaluated by determining diglycerides, proved to be the same in the two categories of oil. The proportions of virgin olive oil added are small, as indicated by the statistically indistinguishable values of triglyceride oligopolymers and free fatty acids obtained. The possibility of setting a limit to the amount of triglyceride oligopolymers present in the commercial category of olive‐pomace oil has been considered. This limit would ensure standardisation of the level of oxidation and, consequently, of the quality of marketed oils and would enhance differentiation between olive‐pomace oil and refined olive‐pomace oil. © 2000 Society of Chemical Industry     

Water‐dispersible microparticles of polyunsaturated oils

Health benefits of polyunsaturated oils are well known; nevertheless, incorporating these oils into food/feed products is not possible due to their chemical instability. Here purified fish oil with 32% (w/w) polyunsaturated fatty acids is co‐encapsulated with the antioxidant butylhydroxyanisole, into 1.0 ± 0.7 μm cellulose‐based microspheres by solvent precipitation method, at the fish oil loading content of 41% and encapsulation efficiency of 81%. Aqueous suspension of the encapsulated fish oil particles shows significantly improved oxidative stability, thermal stability, photostability and shelf‐life stability. Dry powder of the fish oil particles shows excellent shelf‐life stability. Double bond functionality of the encapsulated oil can tolerate high production temperature such as the shrimp feed production process (95 °C for 10 min) or spray dry process (outlet temperature of 120 °C). This encapsulation strategy using biocompatible cellulose polymer should enable effective and versatile applications of polyunsaturated oils in foods, feeds and cosmetics.     

Evaluation of Antioxidant or Prooxidant Properties of Selected Amino Acids Using In Vitro Assays and in Oil‐in‐Water Emulsions Under Riboflavin Sensitization

The antioxidant properties of selected amino acids were tested using in vitro assays and oil‐in‐water (O/W) emulsions under riboflavin (RF) photosensitization. Headspace oxygen content, lipid hydroperoxides, and conjugated dienes were determined for the degree of oxidation. Riboflavin photosensitization was adapted as the oxidation driving force. In vitro assays showed that cysteine had the highest antioxidant properties followed by tryptophan and tyrosine. However, in O/W emulsions under RF photosensitization, tyrosine inhibited lipid oxidation whereas tryptophan acted as a prooxidant. Tryptophan accelerated the rates of oxidation in O/W emulsion without RF. The antioxidant properties of amino acids differed depending on the antioxidant determination methods, oxidation driving forces, and food matrices.