A spin-valve-like magnetoresistance of an antiferromagnet-based tunnel junction

A spin valve is a microelectronic device in which high- and low-resistance states are realized by using both the charge and spin of carriers. Spin-valve structures used in modern hard-drive read heads and magnetic random access memoriescomprise two ferromagnetic electrodes whose relative magnetization orientations can be switched between parallel and antiparallel configurations, yielding the desired giant or tunnelling magnetoresistance effect. Here we demonstrate more than 100% spin-valve-like signal in a NiFe/IrMn/MgO/Pt stack with an antiferromagnet on one side and a non-magnetic metal on the other side of the tunnel barrier. Ferromagneticmoments in NiFe are reversed by external fields of approximately 50 mT or less, and the exchange-spring effect of NiFe on IrMn induces rotation of antiferromagnetic moments in IrMn, which is detected by the measured tunnelling anisotropic magnetoresistance. Our work demonstrates a spintronic element whose transport characteristics are governed by an antiferromagnet. It demonstrates that sensitivity to low magnetic fields can be combined with large, spin-orbit-coupling-induced magnetotransport anisotropy using a single magnetic electrode. The antiferromagnetic tunnelling anisotropic magnetoresistance provides a means to study magnetic characteristics of antiferromagnetic films by an electronic-transport measurement.     

Giant room-temperature magnetoresistance in single-crystal Fe/MgO/Fe magnetic tunnel junctions

The tunnel magnetoresistance (TMR) effect in magnetic tunnel junctions (MTJs) is the key to developing magnetoresistive random-access-memory (MRAM), magnetic sensors and novel programmable logic devices. Conventional MTJs with an amorphous aluminium oxide tunnel barrier, which have been extensively studied for device applications, exhibit a magnetoresistance ratio up to 70% at room temperature. This low magnetoresistance seriously limits the feasibility of spintronics devices. Here, we report a giant MR ratio up to 180% at room temperature in single-crystal Fe/MgO/Fe MTJs. The origin of this enormous TMR effect is coherent spin-polarized tunnelling, where the symmetry of electron wave functions plays an important role. Moreover, we observed that their tunnel magnetoresistance oscillates as a function of tunnel barrier thickness, indicating that coherency of wave functions is conserved across the tunnel barrier. The coherent TMR effect is a key to making spintronic devices with novel quantum-mechanical functions, and to developing gigabit-scale MRAM.     

Giant magnetoresistance through a single molecule

Magnetoresistance is a change in the resistance of a material system caused by an applied magnetic field. Giant magnetoresistance occurs in structures containing ferromagnetic contacts separated by a metallic non-magnetic spacer, and is now the basis of read heads for hard drives and for new forms of random access memory. Using an insulator (for example, a molecular thin film) rather than a metal as the spacer gives rise to tunnelling magnetoresistance, which typically produces a larger change in resistance for a given magnetic field strength, but also yields higher resistances, which are a disadvantage for real device operation. Here, we demonstrate giant magnetoresistance across a single, non-magnetic hydrogen phthalocyanine molecule contacted by the ferromagnetic tip of a scanning tunnelling microscope. We measure the magnetoresistance to be 60% and the conductance to be 0.26G(0), where G(0) is the quantum of conductance. Theoretical analysis identifies spin-dependent hybridization of molecular and electrode orbitals as the cause of the large magnetoresistance.     

Crossover from Kondo-assisted suppression to co-tunneling enhancement of tunneling magnetoresistance via ferromagnetic nanodots in MgO tunnel barriers

The dependence of the tunneling magnetoresistance (TMR) of planar magnetic tunnel junctions on the size of magnetic nanodots incorporated within MgO tunnel barriers is explored. At low temperatures, in the Coulomb blockade (CB) regime, for smaller nanodots the conductance of the junction is increased at low bias consistent with Kondo-assisted tunneling and the TMR is suppressed. For slightly larger nanodots but within the CB regime, the TMR is enhanced at low bias, consistent with co-tunneling. Magnetic tunnel junctions (MTJ) exhibit giant magnetoresistance in small magnetic fields that arises from the flow of spin-polarized current through an ultrathin tunnel barrier separating two magnetic electrodes. The current through an MTJ device depends on the magnetic orientation of the electrodes and is typically higher when the electrode moments are parallel than when they are antiparallel. It has recently been demonstrated that the spin polarization of the tunneling current can be greatly enhanced by using crystalline tunnel barriers formed from MgO as compared with conventional amorphous barriers formed from alumina, due to spin filtering across the MgO layer. The magneto-transport properties of magnetic granular alloys and magnetic tunnel junction devices with magnetic nanodots embedded in amorphous dielectric matrices, and tunnel barriers, respectively, have been studied by several groups, but no systematic studies of the dependence on these properties on the nanodot size have been made.     

Conductivity of a single DNA duplex bridging a carbon nanotube gap

We describe a general method to integrate DNA strands between single-walled carbon nanotube electrodes and to measure their electrical properties. We modified DNA sequences with amines on either the 5' terminus or both the 3' and 5' termini and coupled these to the single-walled carbon nanotube electrodes through amide linkages, enabling the electrical properties of complementary and mismatched strands to be measured. Well-matched duplex DNA in the gap between the electrodes exhibits a resistance on the order of 1 M(Omega). A single GT or CA mismatch in a DNA 15-mer increases the resistance of the duplex approximately 300-fold relative to a well-matched one. Certain DNA sequences oriented within this gap are substrates for Alu I, a blunt end restriction enzyme. This enzyme cuts the DNA and eliminates the conductive path, supporting the supposition that the DNA is in its native conformation when bridging the ends of the single-walled carbon nanotubes.     

Recent Advances in Molecular Spintronics: Multifunctional Spintronic Devices

The field of spintronics has triggered an enormous revolution in information storage since the first observation of giant magnetoresistance (GMR). Molecular semiconductors are characterized by having very long spin relaxation times up to milliseconds, and are thus widely considered to hold immense potential for spintronic applications. Along with the development of molecular spintronics, it is clear that the study of multipurpose spintronic devices has gradually grown into a new research and development direction. The abundant photoelectric properties of molecular semiconductors and the intriguing functionality of the spinterface, together with novel designs of device structures, have promoted the integration of multiple functions and different mechanisms into discrete spintronic devices. Here, according to the different relationships between the integrated mechanisms, multifunctional molecular spintronic devices containing parallel and interactive types are highlighted. This is followed by the introduction of pure‐spin‐current‐type molecular spintronic devices that have already demonstrated great potential for multifunction exploration. Finally, the challenges and outlook that make this field young and energetic are outlined.     

Electronic properties of a single-walled carbon nanotube/150mer-porphyrin system measured by point-contact current imaging atomic force microscopy

The electronic properties of a single-walled carbon nanotube/150mer of porphyrin polymer wire system were investigated. Current-voltage (I-V) curves were measured simultaneously along with topographic observations using point-contact current imaging atomic force microscopy. Symmetric I-V curves were obtained at bare single-walled carbon nanotubes but characteristic asymmetrical rectifying behavior was found at the single-walled carbon nanotube/150mer-porphyrin junctions. This finding is of key importance for the development of new nanoscale molecular electronic devices.     

A carbon based spintronic material Fe(x)-C(1-x)/Si structure

The decay of spin polarization poses serious problems for spintronic devices. It will be greatly helped by the availability of spintronic materials with a long spin diffusion length. Carbon has small spin-orbital interaction and longer coherent length. This makes carbon suitable material for exploitation in the spintronic materials and devices. A great deal of magnetoresistance (MR) research has been carried out in carbon nanotubes, grapheme and small carbon molecules. However, the MRs of these materials are normally observed at low temperature, making these carbon materials difficult used in information industry. In this paper, we introduce a novel class of carbon based hybrid materials Fe(x)-C(1-x)/Si structure which show larger MR at room temperature. These materials have also some other novel physical properties, such as electromagnetoresistance, switch effect, pressure sensitivity, gas sensitivity and photoconductivity. This kind of carbon based materials has shown early sign of being excellent candidates for spintronic materials operating at room temperature.     

Tunable Spin Characteristic Properties in Spin Valve Devices Based on Hybrid Organic–Inorganic Perovskites

The hybrid organic–inorganic perovskites (HOIPs) form a new class of semiconductors which show promising optoelectronic device applications. Remarkably, the optoelectronic properties of HOIP are tunable by changing the chemical components of their building blocks. Recently, the HOIP spintronic properties and their applications in spintronic devices have attracted substantial interest. Here the impact of the chemical component diversity in HOIPs on their spintronic properties is studied. Spin valve devices based on HOIPs with different organic cations and halogen atoms are fabricated. The spin diffusion length is obtained in the various HOIPs by measuring the giant magnetoresistance (GMR) response in spin valve devices with different perovskite interlayer thicknesses. In addition spin lifetime is also measured from the Hanle response. It is found that the spintronic properties of HOIPs are mainly determined by the halogen atoms, rather than the organic cations. The study provides a clear avenue for engineering spintronic devices based on HOIPs.     

A triple quantum dot in a single-wall carbon nanotube

A top-gated single-wall carbon nanotube is used to define three coupled quantum dots in series between two electrodes. The additional electron number on each quantum dot is controlled by top-gate voltages allowing for current measurements of single, double, and triple quantum dot stability diagrams. Simulations using a capacitor model including tunnel coupling between neighboring dots captures the observed behavior with good agreement. Furthermore, anticrossings between indirectly coupled levels and higher order cotunneling are discussed.     

Single electron spintronics

Single electron electronics is now well developed, and allows the manipulation of electrons one-by-one as they tunnel on and off a nanoscale conducting island. In the past decade or so, there have been concerted efforts in several laboratories to construct single electron devices incorporating ferromagnetic components in order to introduce spin functionality. The use of ferromagnetic electrodes with a non-magnetic island can lead to spin accumulation on the island. On the other hand, making the dot also ferromagnetic introduces new physics such as tunnelling magnetoresistance enhancement in the cotunnelling regime and manifestations of the Kondo effect. Such nanoscale islands are also found to have long spin lifetimes. Conventional spintronics makes use of the average spin-polarization of a large ensemble of electrons: this new approach offers the prospect of accessing the quantum properties of the electron, and is a candidate approach to the construction of solid-state spin-based qubits.     

Giant tunnelling magnetoresistance at room temperature with MgO (100) tunnel barriers

Magnetically engineered magnetic tunnel junctions (MTJs) show promise as non-volatile storage cells in high-performance solid-state magnetic random access memories (MRAM). The performance of these devices is currently limited by the modest (< approximately 70%) room-temperature tunnelling magnetoresistance (TMR) of technologically relevant MTJs. Much higher TMR values have been theoretically predicted for perfectly ordered (100) oriented single-crystalline Fe/MgO/Fe MTJs. Here we show that sputter-deposited polycrystalline MTJs grown on an amorphous underlayer, but with highly oriented (100) MgO tunnel barriers and CoFe electrodes, exhibit TMR values of up to approximately 220% at room temperature and approximately 300% at low temperatures. Consistent with these high TMR values, superconducting tunnelling spectroscopy experiments indicate that the tunnelling current has a very high spin polarization of approximately 85%, which rivals that previously observed only using half-metallic ferromagnets. Such high values of spin polarization and TMR in readily manufactureable and highly thermally stable devices (up to 400 degrees C) will accelerate the development of new families of spintronic devices.     

Large Magnetoresistance through a Single Molecule due to a Spin-Split Hybridized Orbital

Using organic materials in spintronic devices raises a lot of expectation for future applications due to their flexibility, low cost, long spin lifetime, and easy functionalization. However, the interfacial hybridization and spin polarization between the organic layer and the ferromagnetic electrodes still has to be understood at the molecular scale. Coupling state-of-the-art spin-polarized scanning tunneling spectroscopy and spin-resolved ab initio calculations, we give the first experimental evidence of the spin splitting of a molecular orbital on a single non magnetic C(60) molecule in contact with a magnetic material, namely, the Cr(001) surface. This hybridized molecular state is responsible for an inversion of sign of the tunneling magnetoresistance depending on energy. This result opens the way to spin filtering through molecular orbitals.     

Reversible electrical switching of spin polarization in multiferroic tunnel junctions

Spin-polarized transport in ferromagnetic tunnel junctions, characterized by tunnel magnetoresistance, has already been proven to have great potential for application in the field of spintronics and in magnetic random access memories. Until recently, in such a junction the insulating barrier played only a passive role, namely to facilitate electron tunnelling between the ferromagnetic electrodes. However, new possibilities emerged when ferroelectric materials were used for the insulating barrier, as these possess a permanent dielectric polarization switchable between two stable states. Adding to the two different magnetization alignments of the electrode, four non-volatile states are therefore possible in such multiferroic tunnel junctions. Here, we show that owing to the coupling between magnetization and ferroelectric polarization at the interface between the electrode and barrier of a multiferroic tunnel junction, the spin polarization of the tunnelling electrons can be reversibly and remanently inverted by switching the ferroelectric polarization of the barrier. Selecting the spin direction of the tunnelling electrons by short electric pulses in the nanosecond range rather than by an applied magnetic field enables new possibilities for spin control in spintronic devices.     

Suspended carbon nanotube quantum wires with two gates

Suspended single-walled carbon nanotube devices comprised of high-quality electrical contacts and two electrostatic gates per device have been prepared. Compared to nanotubes pinned on substrates, the suspended devices exhibit little hysteresis related to environmental factors and act as cleaner Fabry-Perot interferometers or single-electron transistors. The high-field saturation currents in the suspended nanotubes related to optical phonon or zone-boundary phonon scattering are significantly lower due to the lack of efficient heat sinking. The multiple-gate design may also facilitate future investigations into the electromechanical properties of nanotube quantum systems.     

Highly Efficient and Tunable Filtering of Electrons' Spin by Supramolecular Chirality of Nanofiber-Based Materials

Organic semiconductors and organic–inorganic hybrids are promising materials for spintronic-based memory devices. Recently, an alternative route to organic spintronic based on chiral-induced spin selectivity (CISS) is suggested. In the CISS effect, the chirality of the molecular system itself acts as a spin filter, thus avoiding the use of magnets for spin injection. Here, spin filtering in excess of 85% in helical π-conjugated materials based on supramolecular nanofibers at room temperature is reported. The high spin-filtering efficiency can even be observed in nanofibers assembled from mixtures of chiral and achiral molecules through chiral amplification effect. Furthermore and most excitingly, it is shown that both “up” and “down” orientations of filtered spins can be obtained in a single enantiopure system via the temperature-dependent helicity (P and M) inversion of supramolecular nanofibers. The findings showcase that materials based on helical noncovalently assembled systems are modular platforms with an emerging structure–property relationship for spintronic applications.     

In Situ One-Step Grown Fe/Suspended Single-Wall Carbon Nanotube/Fe Junction and Their Controllable Carrier Transport Properties

We demonstrated the in situ one-step fabrication of suspended single wall carbon nanotube transistors with Fe/Al bi- layered film electrodes for practical integrated quantum phase devices. At 300 K, the devices show field effect transistor operation with an excellent subthreshold swing of S ~ 90 mV/decade for a long channel of 3 mum. In the low temperature regime, we observed four clear peaks corresponding to the four-fold degeneracy of the quantum energy levels at 3.7 K. These four clear peaks indicated that both of the contacts between the SWNT and Fe/Al are highly transparent and that a high-quality SWNT bridge is formed. The dl/dV characteristics under an applied external magnetic field indicate that the modulation of the bandgap of the nanotube with the oscillation of the conductance can be achieved by varying the magnetic field, due to the quantum interference of the electrons. In summary, the simple one-step grown SWNT junction between Fe electrodes can be utilized as a promising element for integrated quantum electronic devices.     

Ultrafast magnetization dynamics of spintronic nanostructures

The ultrafast (sub-nanosecond) magnetization dynamics of ferromagnetic thin films and elements that find application in spintronic devices is reviewed. The major advances in the understanding of magnetization dynamics in the two decades since the discovery of giant magnetoresistance and the prediction of spin-transfer torque are discussed, along with the plethora of new experimental techniques developed to make measurements on shorter length and time scales. Particular consideration is given to time-resolved measurements of the magneto-optical Kerr effect, and it is shown how a succession of studies performed with this technique has led to an improved understanding of the dynamics of nanoscale magnets. The dynamics can be surprisingly rich and complicated, with the latest studies of individual nanoscale elements showing that the dependence of the resonant mode spectrum upon the physical structure is still not well understood. Finally, the article surveys the prospects for development of high-frequency spintronic devices and highlights areas in which further study of fundamental properties will be required within the coming decade.     

Study of Spin-Valve Operation in Permalloy–SiO2–Silicon Nanostructures

Magnetotransport studies are performed on nanoscale Permalloy(Py)–(Mg)–SiO₂-degenerate Si(100) tunneling devices in spin-valve geometry with and without Mg interlayer. Highly remanent, single domain Py electrodes (15–100-μm length, 100–1000-nm width) are realized by electron-beam lithography, electron-beam evaporation, and subsequent lift-off. Different widths ensure subsequent switching of the Py nanoelectrodes in increasing magnetic fields. A suppression of spin-polarized current is expected for antiparallel magnetization configuration of source and drain contacts (i.e. positive magnetoresistance) if spin injection and detection have been successfully implemented. Magnetic hysteresis curves of Py nanowire arrays measured at temperatures from 5 K up to 300 K reveal increasing coercive fields (up to 40 mT) for decreased nanowire widths as required for device operation. Small positive magnetoresistance is observed for the spin-valve geometry with Mg interlayer at 4.2 K, contrary to the negative anisotropic magnetoresistance measured of single wires.     

Calculation of the EPR spectrum for an entangled dimer ofS=9/2 Mn4 single-molecule magnets

Recent electron paramagnetic resonance (EPR) and magnetic hysteresis experiments have demonstrated quantum entanglement between single-molecule magnets in a supramolecular [Mn₄]₂ dimer. Here we outline details of the computational methods used to calculate the EPR spectrum for the dimer system, with particular emphasis on the symmetries of the entangled eigenstates and the resultant EPR transition matrix elements.