Parametric Study on Arc Behavior of Magnetically Diffused Arc

A model coupling the plasma with a cathode body is applied in the simulation of the diffuse state of a magnetically rotating arc.Four parametric studies are performed:on the external axial magnetic field (AMF),on the cathode shape,on the total current and on the inlet gas velocity.The numerical results show that:the cathode attachment focuses in the center of the cathode tip with zero AMF and gradually shifts off the axis with the increase of AMF;a larger cathode conical angle corresponds to a cathode arc attachment farther away off axis;the maximum values of plasma temperature increase with the total current;the plasma column in front of the cathode tip expands more severely in the axial direction,with a higher inlet speed;the cathode arc attachment shrinks towards the tip as the inlet speed increases.The various results are supposed to be explained by the joint effect of coupled cathode surface heating and plasma rotating flow.     

Research of Arc Chamber Optimization Techniques Based on Flow Field and Arc Joint Simulation

The preliminary design of an arc chamber in the 550 kV SF_6 circuit breaker was proposed in accordance with the technical requirements and design experience.The structural optimization was carried out according to the no-load flow field simulation results and verified by no-load pressure measurement.Based on load simulation results such as temperature field variation at the arc area and the tendency of post arc current under different recovery voltage,the second optimal design was completed and its correctness was certificated by a breaking test.Results demonstrate that the interrupting capacity of an arc chamber can be evaluated by the comparison of the gas medium recovery speed and post arc current growth rate.     

Research on Argon Vacuum Arc Discharge

正Ion source is the kernel part of electromagnetic isotope separator.For the yeilding-type separator the beam current of the ion source need be large,and usually gas discharge is adopted for producing plasma containing enumerous ions,which could form ion beam by extracting electrodes.Gas ion source is one kind of the intense     

Characteristics of Gliding Arc Discharge Plasma

A gliding arc discharge plasma and its characteristics are described. Analysis of the production principle of the plasma is presented. Some experimental results about two novel types of the gliding arc plasma generator have been obtained. These types of gliding arc plasma axe potentially usable in the chemical industry and environmental engineering.     

Interruption Phenomenon in Intermediate-Frequency Vacuum Arc

In the condition of the 3 mm gap, experiments for 360 Hz intermediate-frequency vacuum arc are carried out in interrupters with the diameters being 41 mm and with the contact materials being CuCr50 and Cu-W-WC alloy respectively. The results indicate that the contacts material is closely related to the breaking capacity of the vacuum interrupters and characteristics of an intermediate-frequency vacuum arc. For contacts with the same diameter, the breaking capacity of CuCr50 is better than that of Cu-W-WC. When the current fails to be interrupted, the arcs overflow the gap and present irregular performances in the first half wave. Consequently a voltage spike appears. More macroscopic metal droplets can be seen in the arc column between CuCr50 contacts because of the lower melting point. It is observed that the droplet emission is much more severe during arc reignition than that in the first half wave. It is much more conspicuous that the high frequency arc voltage noises appear in Cu-W-WC contacts when the vacuum arcs reignite, for higher temperature and stronger electronic emission ability of Cu-W-WC contacts.     

Continuum Radiation from Arc Heated Plasmas

Measurements of the spectral continuum of arc heated nitrogen plasma have been made using high dispersion spectroscopic equipment. These measurements cover a wavelength range of 2700 ? to 44t,000 ? and a temperature range of 9500°K to 12,000°K. The measurements have been compared with a number of theoretical studies of both the spectral and total emissivity. An estimate of the contribution to the continuum of the negative nitrogen ion has been included, and a new value of the effective nuclear charge for Kramers free-free radiation has been measured.     

Simulation of Magnetically Dispersed Arc Plasma

Magnetically dispersed arc plasma [1] exhibits typically dispersed uniform arc column as well as diffusive cathode root [1,2] and diffusive anode root.In this paper magnetically dispersed arc plasma coupled with solid cathode is numerically simulated by the simplified cathode sheath model of LOWKE [3].The numerical simulation results in argon show that the maximum value of arc root current density on the cathode surface is 3.5×10 7 A/m 2,and the maximum value of energy flux on the cathode surface is 3×10 7 J/m 2,both values are less than the average values of a contracted arc,respectively.     

Analysis of Arc Characteristics and Flow Field in Arc Chamber of High-Voltage SF6 Auto-Expansion Circuit Breaker

A new magnetic hydro-dynamics model for nozzle arc emphasizing the interaction of arc with PTFE （polytetrafluorethylene） vapour is established based on the conservation equations. The interruption of auto-expansion circuit breaker is simulated numerically by finite element method and the influence of PTFE vapour on the arc is analysed with this model. The results reveal that the flow field inside the arc chamber is determined by the arc current, the arcing time, the nozzle arc and the clogging of its thermal boundary. The establishment of quenching pressure relies on both SF6 gas and PTFE vapour that absorbed arc energy in the nozzle. The PTFE vapour leads to an increase in the pressure of nozzle arc obviously, and a decrease in the temperature of arc. But it enhances the temperature of arc at zero current and slows down the decreasing rate of arc temperature as the current decreases.     

Characteristics of High Voltage Vortex-Stabilized Arc Heaters

Phenomena occurring in a particular vortex-stabilized geometry are discussed. In arc heaters of this type, voltage increases linearly with flow and with size. The level of performance for various sizes is both predictable and fairly constant. Smoke techniques have elucidated re-entrant flow patterns associated with the vortex flow, and windows permit studying the effect of an auxiliary magnetic field on arc rotation. Measurements of effluent fluctuations are reported.     

Electrode Evaporation Effects on Air Arc Behavior

A numerical study of the effects of copper and silver vapours on the air arc behavior is performed. The commercial software FLUENT is adapted and modified to develop a twodimensional magneto-hydrodynamic （MHD） models of arc with the thermodynamic properties and transport coefficients, net emission coefficient for the radiation model of 99% ai-1% Cu, 99% air-1% Ag, and pure air, respectively. The simulation result demonstrates that vaporization of the electrode material may cool the arc center region and reduce the arc velocity. The effects of Ag vapour are stronger compared to those of Cu vapour.     

Analysis of Effects of the Arc Voltage on Arc Discharges in a Cathode Ion Source of Neutral Beam Injector

A hot cathode bucket ion source is used for the EAST(experimental advanced superconducting tokamak)neutral beam injector.The thermal electrons emitted from the surface of the cathode are extracted and accelerated by the electric field formed by the arc voltage,which is applied between the arc chamber of the ion source and the cathode.This paper analyzes the effects of arc voltage on the arc discharge in a hot cathode high current ion source.     

Characteristics of Atmospheric Pressure Rotating Gliding Arc Plasmas

In this work,a novel direct current (DC) atmospheric pressure rotating gliding arc (RGA) plasma reactor has been developed for plasma-assisted chemical reactions.The influence of the gas composition and the gas flow rate on the arc dynamic behaviour and the formation of reactive species in the N2 and air gliding arc plasmas has been investigated by means of electrical signals,high speed photography,and optical emission spectroscopic diagnostics.Compared to conventional gliding arc reactors with knife-shaped electrodes which generally require a high flow rate (e.g.,10-20 L/min) to maintain a long arc length and reasonable plasma discharge zone,in this RGA system,a lower gas flow rate (e.g.,2 L/min) can also generate a larger effective plasma reaction zone with a longer arc length for chemical reactions.Two different motion patterns can be clearly observed in the N2 and air RGA plasmas.The time-resolved arc voltage signals show that three different arc dynamic modes,the arc restrike mode,takeover mode,and combined modes,can be clearly identified in the RGA plasmas.The occurrence of different motion and arc dynamic modes is strongly dependent on the composition of the working gas and gas flow rate.     

Three-Dimensional Modelling of a DC Arc in Cross-Flow

A commercial CFD （computational fluid dynamics） code FLUENT was used and modified to model an atmospheric pressure argon arc in a low cross flow by solving the fully coupled conservation equations. Numerical experiments, with an arc current of 100 A to 200 A, an arcing distance of 3 mm to 6 mm, and a cross-flow velocity of 10 m/s to 30 m/s, were carried out. The modelling results show that the arc tends to take the shortest path to the anode when deflected by the cross flow; its anode attachment is farther downstream than the cathode one. Furthermore, due to the low input gas flow imposed in this study, the effect of electromagnetic force is important and it influences the crosscut shape of the arc significantly.     

强流双潘宁离子源弧特性研究

针对22cm双潘宁离子源,研究了其弧流与放电调节参数的关系以及二次进气的效果,确定了拉长弧流脉宽、提高弧流强度与稳定性、达成离子源合适工作状态的措施,为获得高品质的弧流提供了依据.离子源弧特性测试研究结果对提高强流离子源的工作性能以实现NBI系统强流准稳态运行有重要的指导意义.     

The Arc Model in SiO2 Current-limiting Fuse

1. IntroductionIn comparison with other switching appliances,fuse is extraodinarily charasterized by a very higharc voltage and a short breaking time, produced dur-ing breaking the short circuit, therefOre, until now)on composite circuit there have been no equivalent, method of testing the capability for high voltage fuse.The test of breaking capacity for fuses requires a setof power supply which can supply high voltage andhigh current simultaneously. Por alternating current,the power supply i…     

DC Arc Plasma Disposal of Printed Circuit Board

A new solid waste disposal technology setup with DC arc plasma is presented. Being different from conventional combustion or burning such as incineration, it is based on a process called controlled high-temperature pyrolysis, the thermal destruction and recovery process. The results of vitrification of the circuit board is presented. The properties of vitrified product including hardness and leaching test results are presented. The final product (vitrified material) and airemission from the plasma treatment is environmentally acceptable.     

Characteristic Analysis of AC Plasma Arc in Water

An experimental system of AC arc discharge in water was designed with pole-pole electrodes and a peak voltage of 1500 V and a test circuit was set up using virtual instrument technology. The mechanism of an AC plasma arc generated in water was analyzed. The voltage- current characteristic of the AC plasma arc was obtained from the waveform. The temperature characteristic was tested with a spectrum diagnosis system, and the effect of different electrode materials on the striking voltage and peak current was analyzed. The results show that when a power supply of 6 KW is applied on electrodes with a gap of 2 mm in water, the striking voltage is from 900 to 1300 V, the arc voltage is from 40 to 100 V, the arc current is from 2 to 7 A, and the zero rest period is from 1 to 2 ms. In addition, the arc voltage and current are different for electrodes in aluminum, copper and stainless steel. The arc voltage is lower and the current is higher for an aluminum electrode than those for copper and stainless steel ones. The highest temperature of the arc is 7643 K.     

Comparative Observation of Ar, Ar-H2 and Ar-N2 DC Arc Plasma Jets and Their Arc Root Behaviour at Reduced Pressure

Results observed experimentally are presented, about the DC arc plasma jets and their arc-root behaviour generated at reduced gas pressure without or with an applied magnetic field. Pure argon, argon-hydrogen or argon-nitrogen mixture was used as the plasma-forming gas. A specially designed copper mirror was used for a better observation of the arc-root behaviour on the anode surface of the DC non-transferred arc plasma torch. It was found that in the cases without an applied magnetic field, the laminar plasma jets were stable and approximately axisymmetrical. The arc-root attachment on the anode surface was completely diffusive when argon was used as the plasma-forming gas, while the arc-root attachment often became constrictive when hydrogen or nitrogen was added into the argon. As an external magnetic field was applied, the arc root tended to rotate along the anode surface of the non-transferred arc plasma torch.     

Simulation of Low-Voltage Arc Plasma During Contact Opening Progress

This paper focuses on the simulation of the low-voltage arc with an opening contact. A controllable experiment setup with a rotating contact is designed to investigate the arc behaviour. Supported by the experiment, the phenomena of arc elongation and commutation in the case of rotating contact are simulated with the dynamic grid technique introduced. Under the given condition of the external magnetic field and the contact rotating velocity, the stagnation and rapid jump of two arc roots are observed by the calculated and experimental arc root displacement. The voltage of arc column can be divided into four phases and its sharp rising progress comes from the increase of the displacement difference between two arc roots in x direction.     

3D Numerical Analysis of the Arc Plasma Behavior in a Submerged DC Electric Arc Furnace for the Production of Fused MgO

A three dimensional steady-state magnetohydrodynamic model is developed for the arc plasma in a DC submerged electric arc furnace for the production of fused MgO. The arc is generated in a small semi-enclosed space formed by the graphite electrode, the molten bath and unmelted raw materials. The model is first used to solve a similar problem in a steel making furnace, and the calculated results are found to be in good agreement with the published measurements. The behavior of arcs with different arc lengths is also studied in the furnace for MgO production. From the distribution of the arc pressure on the bath surface it is shown that the arc plasma impingement is large enough to cause a crater-like depression on the surface of the MgO bath. The circulation of the high temperature air under the electrode may enhance the arc efficiency, especially for a shorter arc.