共查询到18条相似文献,搜索用时 125 毫秒
1.
杨元华 《墙材革新与建筑节能》2011,(12):45-46
自然通风分为两类,一种是利用风压实现自然通风,一种是利用热压实现自然通风。其中,热压通风主要利用“烟囱效应”把室内高温低压低密度空气从通风井排出.新鲜空气从建筑物底部吸入。重庆市全年过渡季节有5个月,平均风速为1.3m/s,风压通风不能满足办公建筑室内空气流通的需要.故应设置利用热压原理通风的通风井。本文以某绿色建筑示范中心设计方案为模型,对通风井设计因素及优化技术进行分析,旨在得到更佳通风效果。 相似文献
2.
论述了建筑中自然通风的原理,指出形成自然通风的三种方式为风压作用、热压作用和风压热压混合作用,分析了自然通风对建筑设计的要求,以福斯特设计的弗雷尤斯地方中等职业学校为例说明了自然通风在建筑设计中的具体运用。 相似文献
3.
自然通风是生态建筑中广泛采用的一项技术手段,根据自然通风的作用原理不同可分为:利用热压实现的自然通风、利用风压实现的自然通风及混合通风。文中引用了典型范例说明自然通风在生态建筑中的应用情况,并在最后提出进行自然通风设计要注意的问题,旨在引起人们对自然通风的重视。 相似文献
4.
5.
浅谈自然通风原理与建筑设计 总被引:1,自引:1,他引:1
对自然通风进行了介绍,通过对风压通风和热压通风的原理进行分析,明确了自然通风原理,并进一步结合建筑设计实例进行了解析,为今后建筑设计中的自然通风设计提供了良好的技术支撑. 相似文献
6.
建筑自然通风之温度效应 总被引:2,自引:0,他引:2
采用自然通风系统因有助于减少空调的使用,既节省能源又有利于人们的身心健康而得到提倡.建筑的自然通风系统由于动力的不同而分为风压通风系统和热压通风系统.与风压通风系统相比,热压通风系统更能适应常变的外部风环境.对热压通风的原理、可实现热压通风系统的建筑空间形式进行了分析探讨,同时列举了在此方面堪称典范的实例,以作为热压通风系统设计的参考. 相似文献
7.
利用热压促进自然通风--以张家港生态农宅通风计算分析为例 总被引:14,自引:0,他引:14
自然通风主要通过热压通风、风压通风或者二者的综合作用完成。热压通风可以应用在建筑密度较高 ,可能会遮挡风压通风的地方。经过分析比较 ,张家港生态农宅利用室内的文丘里管促进热压通风 ,本文对其通风效果进行了计算分析 相似文献
8.
现代建筑中自然通风技术的应用 总被引:2,自引:0,他引:2
自然通风是指利用空气的温差引起的热压或风力造成的风压来促使空气流动而进行的通风换气.在建筑中合理地利用自然通风技术,有利于节约能源,改善室内生态环境.主要介绍了现代建筑中自然通风技术的原理和应用方式,以及影响自然通风的相关因素和限制条件. 相似文献
9.
自然通风潜力的多标准评估方法 总被引:1,自引:0,他引:1
自然通风技术是建筑可持续发展的一个重要发展方向,而自然通风潜力是评价自然通风的重要指标。自然通风潜力应综合考虑热压、风压、空气质量、环境噪声对自然通风应用效果的影响。本文采用Qualiflex矩阵对我国八大城市的自然通风潜力进行了多标准评估分析。其中引入自然压差帕时数来表征热压、风压潜力影响值,建立了自然通风潜力与压差帕时数、空气质量、环境噪声之间的函数模型,并通过计算分析,得到八大城市的自然通风潜力最优排列及综合比较结果。 相似文献
10.
自然通风技术在建筑中的应用探析 总被引:1,自引:0,他引:1
自然通风是建筑节能的一种有效手段,对于降低能耗,提高室内舒适度都有着非常重要的作用.介绍了自然通风的两种基本形式(风压通风和热压通风)的原理以及国外自然通风建筑的实例,旨在揭示自然通风技术的重要性及复杂性.最后,利用自然通风技术为下沉式窑洞民居室内环境的改善做出了有益的尝试. 相似文献
11.
生态建筑中的自然通风 总被引:58,自引:0,他引:58
自然通风(或机械辅助式自然通风)是当今生态建筑中广泛采用的一项技术措施,其应用目的是,尽量减少传统空调制冷系统的使用,从而减小能降低污染,同时更有利于人的生理和心理健康,自然畅风的理论依据是 和建筑外表面的风压和建筑内部的热压在建筑内产生空气流动,但对于不同类型的建筑(不同进深,不同高度,文章从建筑通风这一特定的角度对几个耳熟能详的建筑范例做出新的分析,旨在揭示建筑通风技术的重要性和复杂性。 相似文献
12.
公共建筑自然通风设计若干实例探讨 总被引:1,自引:1,他引:0
在阐述自然通风的意义及实现自然通风途径的基础上,就几个成功利用热压原理实现大进深公共建筑空间自然通风的实例进行了探讨,结果表明:对大进深公共建筑及高层建筑采取先进技术能达到改善建筑室内外热环境,节约能源的目标。 相似文献
13.
《Energy and Buildings》2006,38(5):491-501
The design of natural ventilation in buildings is often performed by means of computational fluid dynamics (CFD) techniques, whose application is gaining popularity. In the present study, Reynolds averaged Navier–Stokes equation (RANS) approach is applied to wind driven natural ventilation in a cubic building. Two different models are considered, namely the two-equation k–ɛ model and the Renormalization Group (RNG) theory. The velocity and pressure distribution inside and around the building are determined, as well as the ventilation rate, for three different configurations: cross ventilation, single-sided ventilation with an opening on the windward wall and single-sided ventilation with an opening on the leeward wall. The numerical results are compared with experimental data, showing a good agreement, particularly when using RNG. The discrepancy in the determination of the ventilation rate is reasonable and the flow distribution inside the building is properly described when RNG model is used. However, the k–ɛ model fails to determine the correct velocity components near the horizontal surfaces. According to these results, the RNG model can be considered a useful tool for the study of wind driven natural ventilation, especially for the assessment of the ventilation rate and of the air distribution inside a room. 相似文献
14.
15.
基于三维RNG k-ε湍流模的CFD数值模拟方法,对两种典型室内布局下的套室分别进行室内自然通风模拟研究,获得了一定风速下卧室、客厅等关键部位的风压、风速分布等流场情况;得到典型布局下的通风量。并对自然通风效果进行评价,结果表明建筑室内布局对室内的自然通风效果有一定的影响。隔墙会改变压力、速度的分布,从而影响室内通风;能形成穿堂风的布局是自然通风的理想布局。建筑设计师应设计合理的建筑室内布局,以提高自然通风效果,从而促进建筑节能。 相似文献
16.
17.
《Energy and Buildings》2005,37(4):311-323
The role of ventilation in the energy balance of buildings is very important, as well as the need to model the use of large openings by occupants in energy simulation. Examples of detailed assessment of natural ventilation in overall building thermal simulation procedures are rather rare, especially for long-term evaluation and different types of ventilation. This study addresses this need focusing on natural ventilation modeling in building energy simulation and introducing coupled thermal and ventilation nodal modeling in 1 h simulation steps. All the related parameters are taken into consideration, from wind pressure data to building envelopes and user behavior. The results are validated by conducting experiments on existing constructions and the thermal behavior is monitored and compared in detail in specific building elements. Coupled thermal and ventilation modeling is then implemented to model and assess ventilation strategies for optimum energy-efficient ventilation in a common apartment. These strategies are compared and analyzed for mild Mediterranean and oceanic climates and optimum design procedures are proposed. 相似文献