共查询到20条相似文献,搜索用时 203 毫秒
1.
应用B2-code模拟了偏滤器等离子体行为,优化了HL-2A装置偏滤器位形。研究了偏滤器刮削层中等离子体与器壁间过渡鞘层的离子碰撞效应,模拟研究了利用LHCD和NBI控制等离子体剖面分布在HL-2A中建立准稳态的反磁剪切位形。HL-2A装置首次实现了下单零点的偏滤器位形运行,完成了偏滤器初步物理实验,截至2004年底,获得等离子体电流320 kA,等离子体存在时间1 580 ms,环向磁场2.2 T。开展了高功率密度聚变堆偏滤器靶板的设计研究,特别是流动液态锂偏滤器靶板表面的物理过程的研究。探索性研究了用RF有质动力势改善偏滤器排灰效率和减少氚投料量。对FEB- E聚变堆偏滤器进行了优化设计。用电子束模拟对碳基材料及钨进行了高热负荷冲击实验,完成了钨/铜合金的热等静压焊接及热疲劳试验研究。研究了氦在钨中的滞留与热解吸行为。 相似文献
2.
Guozhong DENG Xiaoiu LIU Liang WANG Shaocheng LIU Jichan XU Wei FENG Jianbin LIU Huan LIU Xiang GAO 《等离子体科学和技术》2017,19(4):45101
The edge plasma code package SOLPS5.0 is employed to simulate the divertor power footprint widths of the experimental advanced superconducting tokamak(EAST)L-mode and ELM-free H-mode plasmas.The divertor power footprint widths,which consist of the scrape-off layer(SOL)widthλ_q and heat spreading 5,are important physical parameters for edge plasmas.In this work,a plasma current scan is implemented in the simulation to obtain the dependence of the divertor power footprint width on the plasma current I_p.Strong inverse scaling of the SOL width with I_p has been achieved for both L-mode and H-mode plasmas in the forms ofλ_(q,L-mode)=4.98×I_p~(-0.68)andλ_(q,H-mode)=1.86×I_p~(-1.08).Similar trends have also been demonstrated in the study of heat spreading with S_(L-mode)=1.95×I_p~(-0.542)and S_(H-mode)=0.756×I_p~(-0.872).In addition,studies on divertor peak heat load and the magnetic flux expansion factor show that both of them are proportional to plasma current.The simulation work here can act as a way to explore the power footprint widths of future tokamak fusion devices such as ITER and the China Fusion Engineering Test Reactor(CFETR). 相似文献
3.
A. H. Bekheit 《Journal of Fusion Energy》2012,31(1):38-43
The formation of electron internal transport barrier (EITB) during using counter-neutral beam injection (NBI) heating in the edge plasma of small size divertor tokamak can be simulated by using fluid transport code B2SOLPS0.5.2D. The results of simulations give us the following: (1) Plasma heating with counter-neutral beam injection leads to, strong, parabola type electron internal transport barrier (EITB) was formed in the edge plasma of small size divertor tokamak. (2) In case of plasma heating by counter-neutral beam injection, the radial electric field shear (E r –gradient) was increased, while electron transport coefficients were reduced in conjunction with the formation of electron internal transport barrier (EITB). (3) The plasma heating by counter-neutral beam injection play significantly role in redistribution of parallel (toroidal) velocity in edge plasma of small size divertor tokamak. 相似文献
4.
The tokamak simulation code (TSC) is employed to simulate the complete evolution of a disruptive discharge in the experimental advanced superconducting tokamak.The multiplication factor of the anomalous transport coefficient was adjusted to model the major disruptive discharge with double-null divertor configuration based on shot 61 916.The real-time feed-back control system for the plasma displacement was employed.Modeling results of the evolution of the poloidal field coil currents,the plasma current,the major radius,the plasma configuration all show agreement with experimental measurements.Results from the simulation show that during disruption,heat flux about 8 MW m-2 flows to the upper divertor target plate and about 6 MW m-2 flows to the lower divertor target plate.Computations predict that different amounts of heat fluxes on the divertor target plate could result by adjusting the multiplication factor of the anomalous transport coefficient.This shows that TSC has high flexibility and predictability. 相似文献
5.
6.
《Fusion Engineering and Design》2014,89(7-8):1048-1053
The WEST (W – for tungsten – Environment in Steady-state Tokamak) project is an upgrade of Tore Supra from a limiter based tokamak with carbon PFCs into an X-point divertor tokamak with full-tungsten armour while keeping its long discharge capability. The WEST project will primarily offer the key capability of testing for the first time the ITER technology in real plasma environment. In particular, the main divertor (i.e. the lower divertor) of the WEST project will be based on actively cooled tungsten monoblock components and will follow as closely as possible the design and the assembling technology, foreseen for the ITER divertor units.The current design of WEST ITER-like tungsten divertor has now reached a mature stage following the 2013 WEST Final Design Review. This paper presents the key elements of the design, reports the technological requirements and reviews the main design and integration issues. 相似文献
7.
H. Bekheit 《Journal of Fusion Energy》2013,32(1):150-153
This paper reports simulation of L–H transition by fluid transport code B2SOLPS0.5.2D at low ion plasma density on neutral beam injection (NBI) in the edge plasma of small size divertor tokamak. The simulation provides the following results: (1) the transition is possible at plasma density 2 × 1019 m?3 with NBI at temperature heating Theating 3.62 keV. (2) The simulation predicts the generation of large negative radial electric field E r, which is thought to help L–H transition during NBI, is suggested in the edge plasma of small size divertor tokamak. (3) The toroidal current density in the edge plasma of small size divertor tokamak is plasma density and direction of NBI dependence. (4) Parallel flux transport by anomalous viscosity (turbulent) through separatrix leads to the variation of toroidal current density. 相似文献
8.
Tingfeng Ming Wei Zhang Jiafeng Chang Jun Wang Guosheng Xu Siye Ding Ning Yan Xiang Gao Houyang Guo 《Fusion Engineering and Design》2009,84(1):57-63
Full graphite wall of experimental advanced superconducting tokamak (EAST) has been developed in the spring of 2008. A new divertor triple probe diagnostics system (DTPDs) is built for EAST during this upgrade. The tip shape and connected structure of the probe are optimized for variational magnetic field directions and DTPDs maintenance. The experiment has been carried out with a full graphite wall for EAST, and near double-null diverted plasma is achieved successfully. The evolutions of electron temperature, density, particle flux and power densities along the divertor targets have been obtained with DTPDs. 相似文献
9.
Jianbin LIU 《等离子体科学和技术》2022,24(7):75101
Detachment in helium (He) discharges has been achieved in the EAST superconducting tokamak equipped with an ITER-like tungsten divertor. This paper presents the experimental observations of divertor detachment achieved by increasing the plasma density in He discharges. During density ramp-up, the particle flux shows a clear rollover, while the electron temperature around the outer strike point is decreasing simultaneously. The divertor detachment also exhibits a significant difference from that observed in comparable deuterium (D) discharges. The density threshold of detachment in the He plasma is higher than that in the D plasma for the same heating power, and increases with the heating power. Moreover, detachment assisted with neon (Ne) seeding was also performed in L- and H-mode plasmas, pointing to the direction for reducing the density threshold of detachment in He operation. However, excessive Ne seeding causes confinement degradation during the divertor detachment phase. The precise feedback control of impurity seeding will be performed in EAST to improve the compatibility of core plasma performance with divertor detachment for future high heating power operations. 相似文献
10.
As a new diagnostic means, plasma-imaging system has been developed on the HL-2A tokamak, with a basic understanding of plasma discharge scenario of the entire torus, checking the plasma position and the clearance between the plasma and the first wall during discharge. The plasma imaging system consists of (1) color video camera, (2) observation window and turn mirror, (3) viewing & collecting optics, (4) video cable, (5) Video capture card as well as PC. This paper mainly describes the experimental arrangement, plasma imaging system and detailed part in the system, along with the experimental results. Real-time monitoring of plasma discharge process, particularly distinguishing limitor and divertor configuration, the imaging system has become key diagnostic means and laid the foundation for further physical experiment on the HL-2A tokamak. 相似文献
11.
Impurity is one of the key issues on a great impact to the quality of tokamak plasma.HL-2A is the first divertor tokamak in China. In this paper the experimental results are presented on impurity through the line emission measurement in the campaign in 2003 under the limiter and divertor configurations. The low-Z impurities such as carbon and oxygen are the most important components in the plasma, but their content are not so high to affect the discharge quality. The high-Z impurities such as copper and ferrum are not essential. The emission intensity of impurity is clearly decreased during the divertor configuration formed. 相似文献
12.
Modeling with OEDGE was carried out to assess the initial and long-term plasma contamination efficiency of Ar puffing from different divertor locations,i.e.the inner divertor,the outer divertor and the dome,in the EAST superconducting tokamak for typical ohmic plasma conditions.It was found that the initial Ar contamination efficiency is dependent on the local plasma conditions at the different gas puff locations.However,it quickly approaches a similar steady state value for Ar recycling efficiency >0.9.OEDGE modeling shows that the final equilibrium Ar contamination efficiency is significantly lower for the more closed lower divertor than that for the upper divertor. 相似文献
13.
A. H. Bekheit 《Journal of Fusion Energy》2016,35(5):769-775
The heat flows out from the tokamak core region are collected on the divertor plates and external wall. Control of heat flux exhaust in the SOL and divertor plates regions is one of the important issues in tokamak physics. There are important phenomena affecting heat flows were simulated. The simulation is based on the B2SOLPS5.0 2D multifluid code. It is demonstrated that, the following results: (1) The simulation shows that, the operation of small size divertor tokamak, the divertor plate with/without impurities influence on profiles of electron, ion temperatures, and heat loads significantly. (2) Under normal direction of parallel (toroidal) magnetic field and different values of edge plasma density, strong “SOL” heat flow exists directed towards the LFS (outer) plate. (3) The simulation results show that, the increasing of the plasma density strong influence on the ion and electron poloidal heat fluxes profile significantly. The ion and electron polodial heat flux increase by factor “~8” and “2.4” times. (4) The simulation results show that the in–out asymmetry of heat fluxes was reversed when switching on/off E × B drifts in the edge plasma of this tokamak. (5) The simulation results show correlation between the in–out asymmetry divertor heat fluxes and E × B drift velocity. (6) The observed heat loads asymmetry between HFS and LFS plates can be explained with the radial electric field in SOL. (7) Also the simulation results performed result in, the in–out asymmetry strong influence on the characteristic length of ion poloidal heat flux. 相似文献
14.
A two-point model is used to investigate the characteristics of scrape-off layer(SOL) plasma with the field line tracing method in the experimental advanced superconducting tokamak. The profiles of plasma density, temperature and particle flux on the divertor target calculated by the model are in reasonable agreement with experimental observation. Moreover, the profiles of plasma parameters on the divertor target strongly depend on the SOL magnetic topology or the equilibrium configuration from the modeling. 相似文献
15.
David A. Ehst 《Journal of Fusion Energy》1981,1(4):357-365
Low aspect ratio designs are proposed for steady-state tokamak reactors. Benefits stem from reduced major radius and lessened stresses in the toroidal field coils, resulting in possible cost savings in the tokamak construction. In addition, a low aspect ratio (A=2.6) permits the application of a bundle divertor capable of diverting 3-T fields to a power reactor using STARFIRE technology. Such a low aspect ratio is possible with the elimination of poloidal field coils in the central hole of the tokamak, which implies a need for noninductive current drive. Several plasma waves are considered for this application, and it appears likely that a candidate can be found which reduces the electric power for current maintenance to an acceptable value. 相似文献
16.
ASDEX (Axially SymmetriC Divertor Experiment) is a large tokamak now under construction at IPP Garching. The main parameters are: major radius 1.65 m, plasma radius 0.4 m, toroidal field on axis 2.8 T and plasma current 500 kA. The experiment is scheduled to go into operation in about two years. The first aim of the experiment is to test the divertor action, i.e. plasma stability without material limiter and reduction of impurity influx. Since the divertor will essentially be of the unload-type, the latter problem should be solved by reducing wall bombardment. On the premises of sufficient stability the plasma-wall interaction will occur on the divertor slits, in the main divertor chamber and (with refuelling) on the wall owing to charge exchange neutrals. Plans for surface studies are being discussed. 相似文献
17.
A. H. Bekheit 《Journal of Fusion Energy》2010,29(5):443-446
A new method for describing the nature of radial electric field and its relation with toroidal rotation in edge plasma of small size divertor tokamak is proposed in this work. The expression of radial electric field in the edge plasma of small size divertor tokamak can be divided into two parts. The first part E r (0) is related to electrostatic potential of plasma in edge plasma of this tokamak. The second part E r (1) is related to contribution of toroidal rotation of radial current in edge plasma of this tokamak. The results of this work provide the following: (1) A new one-dimensional ordinary differential equation for toroidal velocity is obtained. The one-dimensional ordinary differential equation suggest new tool to explaining tokamak experiments involving measurements of plasma rotation and radial electric field. (2) Also the results of this work shows that, the main contribution to the radial electric field inside separatrix (plasma core) gives the term E r (1). 相似文献
18.
Zhendong Yang Shuangbao Shu Kaifu Gan Jianan Fang Bin Zhang 《Journal of Fusion Energy》2017,36(1):15-20
Disruptions are the most dangerous instabilities in tokamak plasma. During plasma disruption, the large amounts of energy will be deposited on Plasma Facing Components (PFCs) which is a damaging threat for the divertor target and the first wall materials. Therefore, studying the characteristic of heat deposition on the first wall is very significant. The Infrared (IR) camera is an effective tool to measure the surface temperature profile on the first wall on the Experimental Advanced Superconducting Tokamak (EAST). With a finite difference method, the heat flux arrived to the divertor can be calculated from the surface temperature. However, the surface layer on the divertor has a great influence on the calculation of the heat flux on the divertor. The numerical method for solving heat conduction for semi-infinite model is given in this paper. And the thermal resistance of surface layers is considered in this numerical method. In addition, the distribution of heat flux on the divertor during disruption is also shown. 相似文献
19.
A snowflake divertor magnetic configuration (Ryutov in Phys Plasmas 14(6):064502, 2007) with the second-order poloidal field null offers a number of possible advantages for tokamak plasma heat and particle exhaust in comparison with the standard poloidal divertor with the first-order null. Results from snowflake divertor experiments are briefly reviewed and future directions for research in this area are outlined. 相似文献
20.
Zhipeng CHEN 《等离子体科学和技术》2022,24(12):124008
To extend the operation region of the Joint-Texas Experimental tokamak (J-TEXT) to the divertor configuration and even the H-mode, the divertor configuration discharge has been realized for the first time in the J-TEXT tokamak. Along with the establishment of a power supply for the divertor configuration, the construction of relevant diagnostics, and the installation of the divertor target on the high-field side, divertor discharge has been tested. Through the equilibrium calculation and position stability analysis, the control strategy has evolved to be more stable. High-density experiments and auxiliary heating experiments have been carried out on the divertor configuration. The special midplane single-null (MSN) divertor configuration is shown to be more stable than the limiter configuration in the density limit condition and can reach a higher density in the experiment. In the ECRH experiment, the power injection enhances the electron temperature and density, while more heat outflux is loaded on the divertor target tiles and causes more intensive recycling and impurity release. The future plan for the divertor configuration operation in the J-TEXT tokamak is also included. 相似文献