Co2O3掺杂对(Na0.8K0.2)0.5Bi0.5TiO3陶瓷结构与电性能的影响

采用传统固相法制备了(Na0.8K0.2)0.5Bi0.5TiO3+xmol%Co3+(BNKT-xCo,x=0-8)无铅压电陶瓷,研究了Co2O3掺杂对BNKT陶瓷的显微结构与电学性能的影响。研究表明:适量的Co2O3掺杂促进了晶粒生长,纯BNKT陶瓷样品在介电温谱上有2个介电反常峰Td和Tm,Co2O3掺杂后使所有陶瓷样品的第一个介电反常峰Td消失,表明Co3+抑制铁电-反铁电相变。室温下样品的介电、铁电和压电性能表明Co2O3起硬性掺杂效应。当x=7时陶瓷样品电性能最佳,其中机械品质因子Qm=498,介电损耗tanδ=2.3%(1kHz),压电常数d33=103pC/N,平面机电耦合系数kp=27%。     

Y_2O_3,Fe_2O_3掺杂(Na_(0.5)Bi_(0.5))TiO_3无铅压电陶瓷的研究

采用固相法制备了(Na0.5Bi0.5)TiO3+xmol%Y2O3+xmol%Fe2O3(0≤x≤1.25)(简称NBTYF)无铅压电陶瓷。XRD衍射结果表明,所有陶瓷样品均为单一的钙钛矿结构。SEM表明,掺杂后陶瓷的晶粒尺寸增大。介电温谱表明该体系陶瓷具有弛豫特性,随掺杂量的增加,退极化温度Td向低温方向移动,而居里温度Tc向高温方向移动。陶瓷的密度和压电常数d33和随x的增加先增大后减小,而机械品质因子Qm一直下降。当x=1.00时,该体系陶瓷具有最佳压电性能,d33=106pC/N,Qm=93,kp=16.08%,εr=594,tanδ=5.33%,ρ=5.699g/cm3。     

Co、Mn共掺杂铋层状Na_(0.5)Bi_(4.5)Ti_4O_(15)无铅压电陶瓷的显微结构及电性能

采用固相法制备Na0.5Bi4.5Ti4O15+x%Co2O3+y%MnCO3(NBT-CM-x)(y=0.1x)铋层状无铅压电陶瓷,研究了Co、Mn共掺杂对Na0.5Bi4.5Ti4O15陶瓷显微结构和电性能的影响。结果表明:所有样品均为铋层状结构;Co、Mn共掺杂能促进陶瓷晶粒生长;随Co、Mn共掺杂量的增加,Curie温度TC逐渐升高(均在635℃以上);Cole-Cole图出现2个圆弧,表明存在晶粒和晶界效应;适量Co、Mn共掺杂提高了Na0.5Bi4.5Ti4O15陶瓷的压电常数d33、剩余极化强度Pr、机械品质因数Qm和相对介电常数εr,降低了直流电导率σDC和介电损耗tanδ。当x=3.0时,NBT-CM-x陶瓷的综合性能最佳:d33=24pC/N,Pr=11.70μC/cm2,Qm=3 117,εr=198,tanδ=0.19%,kp=9.9%,kt=14.7%,表明该陶瓷材料具有良好的高温应用前景。     

Na0.5Bi0.5TiO3-Ba0.5Sr0.5Nb2O6无铅压电陶瓷的研究

采用固相法制备了(1-x)(Na0.5Bi0.5)TiO3-xBa0.5Sr0.5Nb2O6(0≤x≤1.0％)(简称(1-x)NBT-xBSN)无铅压电陶瓷,研究了不同BSN含量(x=0,0.1％,0.3％,0.5％,0.7％,1.0％,摩尔分数)样品的物相组成、显微结构及电性能.结果表明:所有样品均为纯钙钛矿结构,随掺杂量x的增加,陶瓷的相对密度pr、压电常数d33和机电耦合系数kp均先增大后降低,机械品质因子Qm和退极化温度Td则逐渐下降.该体系陶瓷具有弥散相变特征,弥散指数介于1.6～1.7.当x=0.5％时,陶瓷获得最佳性能:d33=92pC/N,kp=0.164,Qm=89,εr=650,tanδ=5.47％,pr=96.5％.     

锂掺杂KNN-BNKT无铅压电陶瓷性能研究

采用液相包覆法制备了结构致密的铌酸钾钠基[(K0.5Na0.5NbO3-K0.1Na0.4Bi0.5TiO3)-xLiNbO3,0≤x≤0.02]无铅压电陶瓷,研究了掺杂Li+对铌酸钾钠钛酸铋钾钠K0.5Na0.5NbO3-K0.1Na0.4Bi0.5TiO3(KNN-BNKT)晶体结构和压电、介电性能的影响。结果表明:当Li+含量在x取0～0.010(摩尔分数)时,陶瓷样品均形成了均一的钙钛矿型结构。Li+掺杂量对陶瓷压电、介电性能有很大的影响,其压电常数(d33)随着Li+掺杂量的增加先升高后降低,并在x=0.010的时候取得最大值。实验表明:当x=0.01时,(K0.5Na0.5NbO3-K0.1Na0.4Bi0.5TiO3)-xLiNbO3无铅压电陶瓷表现出较好的压电性能:d33=173pC/N,相对介电常数εr=620.745,介电损耗tanδ=0.0132,kp=27.35%,kt=26.34%,Qm=48.97。     

铈和锶复合掺杂对Bi_4Ti_(2.92)Nb_(0.08)O_(12.04)高温无铅压电陶瓷的影响

采用固相法制备了Ce和Sr复合掺杂的Bi4Ti2.92Nb0.08O12.04(BTN+0.5x%CeO2+0.5x%SrCO3,0≤x≤1.5,质量分数)铋层状高温无铅压电陶瓷,研究了不同含量的Ce和Sr掺杂对BTN系陶瓷微观结构及电性能的影响。结果表明:样品均为单一的铋层状结构相,Ce和Sr的引入明显提高了陶瓷的压电性能。当掺杂量x=0.9时,样品具有最佳性能:压电常数d33=29pC/N,平面机电耦合系数kp=8.77%,介电损耗tanδ=0.13%,剩余极化强度Pr=15.87μC·cm-2和Curie温度TC=627℃。此外,该组分陶瓷样品具有良好的压电稳定性,表明该材料在高温领域下具有良好的应用前景。     

Nb5+掺杂改性CaBi4Ti4O15压电陶瓷的研究

采用传统固相烧结法,制备了CaBi4Ti(1-x)NbxO1(5x=0.00-0.05,CBT-N)系铋层状结构无铅压电陶瓷。研究了Nb5+掺杂对CBT压电陶瓷压电与介电性能的影响。研究结果表明:添加Nb5+离子,改善了CBT陶瓷的烧结特性,提高了瓷体的致密度。Nb2O5的引入降低了CBT系列陶瓷的介质损耗,改善了陶瓷的压电与介电性能。当掺入量x=0.04(CaBi4Ti0.96Nb0.04O15)时制备的CBT基铋层状压电陶瓷具有优异的压电性能:d33=14pC/N,Qm=3086,εr=212,tanδ=0.0041,kt/kp=1.681。     

(1-x)Li0.05(K0.5Na0.5)0.95NbO3-x(Bi0.5Na0.5)TiO3无铅压电陶瓷的结构与电性能研究

采用固相反应法制备了(1-x)Li0.05(K0.5Na0.5)0.95NbO3-x(Bi0.5Na0.5)TiO3(LKNN-BNT)无铅压电陶瓷,研究了BNT的添加量x(0,0.005,0.01,0.02)对LKNN-BNT陶瓷的结构与电性能影响。X射线衍射(XRD)分析结果表明当x≤0.005时,陶瓷为正交钙钛矿结构,而当x≥0.01时,陶瓷则转变为四方钙钛矿结构,说明该陶瓷的多型相转变(PPT)区域为0.005相似文献   

Sm3+掺杂SrBi4Ti4O15–Bi4Ti3O(12)压电陶瓷的结构、电学和光致发光性能

采用固相法制备Sm³⁺掺杂SrBi_8–xSm_xTi₇O(27)(SBT–BIT–x Sm³⁺, 0≤x≤0.50)共生铋层状陶瓷,研究了不同掺杂量的Sm³⁺对样品的结构、介电、压电以及光致发光性能的影响。结果表明:所有陶瓷样品均为单一的共生铋层状结构,XRD精修和Ramam结果显示Sm³⁺掺杂引起样品晶格畸变的减小,适量的Sm³⁺掺杂降低了介电损耗tanδ,提升了压电常数d33,当x=0.30时,综合电性能最佳:压电常数d33=16.3 pC/N,tanδ=0.90%。在407 nm近紫外光的激发下,SBT–BIT–x Sm³⁺陶瓷样品在598 nm处存在最强的红橙光发射,当x=0.15时,发光强度达到最佳,Sm³⁺掺杂SBT–BIT共生铋层状陶瓷在光-电多功能器件等领域中具有潜在的应用前景。     

BiFeO_3掺杂改性铌酸钾钠无铅压电陶瓷

采用传统固相法制备了(1–x)(K0.5Na0.5)NbO3-xBiFeO3[(1–x)KNN-xBF]无铅压电陶瓷,研究了不同BF含量(x=0,0.175%,0.5%,1%,2%,3%,摩尔分数)样品的物相组成、显微结构及电性能。结果表明:当x≤3%时,得到了纯钙钛矿结构的(1–x)KNN-xBF陶瓷。与纯KNN相比,在0x≤1%时,(1–x)KNN-xBF样品的密度(ρ)、压电常数(d33)、平面机电耦合系数(kp)和机械品质因子(Qm)都显著增大;当1%x≤3%时,ρ,d33,kp和Qm又迅速降低;在x=1%时达到最大值。x=1%时,(1-x)KNN–xBF材料的综合性能最好,其中ρ=4.42g/cm3,d33=172pC/N,kp=0.45,介电损耗tanδ=0.021,相对介电常数εr=759和Qm=138;同时表现出较好的抗老化性能。     

Magnetoelectric properties of 0.5BiFeO3–0.5Pb(Fe0.5Nb0.5)O3 solid solution

Magnetoelectrics are materials that join magnetic and electric orderings in the same phase. They exhibit magnetoelectric coupling which is important from the fundamental and practical point of view. The subject of the paper is a presentation of magnetic, electric and magnetoelectric properties of 0.5BiFeO₃–0.5Pb(Fe_0.5Nb_0.5)O₃ solid solution. The obtained material belongs to oxide perovskite magnetoelectrics of relatively high magnetic and electric ordering temperatures. Both temperatures are considerably above room what suggests potential application possibilities of the material. The magnetic properties were investigated using Mössbauer spectroscopy and magnetization measurements. The solid solution is an antiferromagnet with incomplete compensated magnetic moments. The electrical properties were determined using impedance spectroscopy analysis. There is an observed change of the electrical properties at the magnetic ordering temperature what indicates magnetoelectric coupling in the system. The electrical conductivity mechanism is also proposed. Magnetoelectric voltage coefficient was determined and possible explanation of its changes was proposed.     

Solid state metathesis synthesis of BaTiO3, PbTiO3, K0.5Bi0.5TiO3 and Na0.5Bi0.5TiO3

A solid state metathesis approach has been applied to synthesize perovskite oxides such as BaTiO₃, PbTiO₃, K_0.5Bi_0.5TiO₃ and Na_0.5Bi_0.5TiO₃, these were characterized by powder XRD, IR and energy dispersive spectra (EDS). Potassium titanium oxalate and metal chlorides are used as the starting materials. X-ray analysis shows the formation of a single phase with tetragonal structure for BaTiO₃, PbTiO₃, K_0.5Bi_0.5TiO₃ and a monoclinic structure for Na_0.5Bi_0.5TiO₃. The Infrared spectra of these compounds show the characteristic band due to Ti–O octahedron for all the compounds. The EDS spectra show the relative ratio of the metal ions. The morphology of synthesized compounds was obtained from SEM measurements.     

Enhancement in dielectric and ferroelectric properties of lead free Bi0.5(Na0.5K0.5)0.5TiO3 ceramics by Sb-doping

Lead free piezoelectric Bi_0.5(Na_0.5K_0.5)_0.5TiO₃ (pure and 1 wt.%, 2 wt.%, 4 wt.% Sb-doped) ceramics were synthesized away from its MPB. The crystalline nature of the BNKT ceramic was studied by XRD and SEM. Depolarization temperature (T_d) and transition temperature (T_c) were observed through phase transitions in dielectric studies which were found to increase after Sb-doping, thus increasing its usable temperature range. In the study of relaxation behavior, the activation energy for relaxation was found to be 0.33, 0.43, 0.57 and 0.56 eV for pure and Sb-doped samples, respectively. All samples were found to exhibit normal Curie-Weiss law above their T_c. Doping of Sb was found to restrain the diffused character of the pure sample. In P-E loop, Sb-doping was found to increase the ferroelectric properties.Pure and Sb-doped BNKT ceramics exhibited high values of piezoelectric charge coefficient (d₃₃) as 115, 121, 129 and 100 pC/N, respectively.     

Effect of Nb-doping on dielectric, ferroelectric and conduction behaviour of lead free Bi0.5(Na0.5K0.5)0.5TiO3 ceramic

Bi_0.5(Na_0.5K_0.5)_0.5TiO₃ + y wt.% Nb (y = 0-1) piezoelectric ceramics were synthesized by solid state reaction. The effect of varying Nb concentration on various properties of BNKT ceramic has been investigated in detail. The effect of Nb-doping on dielectric and ferroelectric property has been presented. An increase in its depolarization temperature and Curie temperature with Nb concentration was observed. The electrical properties of pure and Nb-doped BNKT ceramic over a wide range of frequencies (20 Hz to 2 MHz) and temperature (30-430 °C) were studied using impedance spectroscopic technique.     

Microstructure and piezoelectric properties of CuO-doped 0.95(K0.5Na0.5)NbO3-0.05Li(Nb0.5Sb0.5)O3 lead-free ceramics

The effects of sintering temperature and the addition of CuO on the microstructure and piezoelectric properties of 0.95(K_0.5Na_0.5)NbO₃-0.05Li(Nb_0.5Sb_0.5)O₃ were investigated. The KNN-5LNS ceramics doped with CuO were well sintered even at 940 °C. A small amount of Cu²⁺ was incorporated into the KNN-5LNS matrix ceramics and XRD patterns suggested that the Cu²⁺ ion could enter the A or B site of the perovskite unit cell and replace the Nb⁵⁺ or Li⁺ simultaneously. The study also showed that the introduction of CuO effectively reduced the sintering temperature and improved the electrical properties of KNN-5LNS. The high piezoelectric properties of d₃₃ = 263 pC/N, k_p = 0.42, Q_m = 143 and tan δ = 0.024 were obtained from the 0.4 mol% CuO doped KNN-5LNS ceramics sintered at 980 °C for 2 h.     

Size-dependent magnetoelectric response of (Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3)-(Ni0.8Zn0.2)Fe2O4 particulate composites

In this paper, we investigated the effect of magnetic grain size on magnetoelectric responses of particulate magnetoelectric 0.7(Bi_0.5Na_0.5TiO₃-Bi_0.5K_0.5TiO₃)-0.3(Ni_0.8Zn_0.2)Fe₂O₄ (BNKT-NZFO) composites. The coexistence of two chemically separated phases was confirmed using x-ray diffraction analysis. The composites had homogeneous microstructure with controlled grain size. The magnetoelectric response of the BNKT-NZFO composites sensitively depended on the grain size of the NZFO phase and the magnetoelectric voltage coefficients presented a marked enhancement of 33% in the engineered grain size range. This result indicated that tailoring the magnetic grain size physically will provide a powerful mean of enhancing magnetoelectric coupling in a two-phase particulate composite, with large potential application in area of magnetic field sensor.     

High energy storage performance of [(Bi0.5Na0.5)0.94Ba0.06]0.97La0.03Ti1-x(Al0.5Nb0.5)xO3 ceramics with enhanced dielectric breakdown strength

Novel lead-free [(Bi_0.5Na_0.5)_0.94Ba_0.06]_0.97La_0.03Ti_1-x(Al_0.5Nb_0.5)_xO₃ ceramics (BNBLT-xAN) were prepared by the conventional solid state sintering method. The dielectric, ferroelectric, ac impedance and energy-storage performance were systematically investigated. Temperature dependent permittivity curves showed that relaxation properties of sintered ceramics gradually diminished with the increase of AN. The introduction of AN gave rise to a slimmer polarization hysteresis loop (P-E) and an enhanced dielectric breakdown strength (DBS). Therefore, the optimum energy-storage performance were realized at x?=?0.05 with the energy-storage density (W_rec) of 1.72?J/cm³ and energy-storage efficiency (η) of 85.6% at 105?kV/cm, accompanied with the excellent temperature stability and fatigue performance. The results demonstrated that BNBLT-xAN system was a promising lead-free candidate for energy-storage applications.     

Effect of Particle Sizes of Starting Materials on Microstructure Development in Textured Bi0.5(Na0.5K0.5)0.5TiO3

Microstructure development in Bi_0.5(Na_0.5K_0.5)_0.5TiO₃ prepared by a reactive-templated grain growth process was dependent on the sizes of platelike Bi₄Ti₃O₁₂ (BiT) and equiaxed TiO₂ particles used as starting materials. Calcined compacts were composed of large, platelike template grains and small, equiaxed matrix grains, the sizes of which were determined by those of the BiT and TiO₂ particles, respectively. Texture was developed by the growth of template grains at the expense of matrix grains during sintering, and a new mechanism of grain growth was proposed on the basis of microstructure observation. The grain growth rate was determined by the template and matrix grain sizes, and a dense ceramic with extensive texture was obtained using small BiT and TiO₂ particles.