共查询到19条相似文献,搜索用时 140 毫秒
1.
2.
快速自动增益控制(Automatic Gain Control,AGC)系统可以扩大接收机的动态范围,同时保证系统响应时间.本文提出了一种快速峰值检测算法,并应用于实际AGC系统.首先分析了快速峰值检测算法的准确性,然后进行计算机仿真,最后完成了基于FPGA的快速AGC系统硬件实现.理论分析、计算机仿真及硬件测试证明,应用快速峰值检测算法的AGC系统响应时间可达微秒级. 相似文献
3.
4.
在射频仿真系统中,由于雷达系统的接收信号动态范围很大,而数字接收部分存在最佳输入电平范围的问题,所以中频接收需要实现信号的增益自动控制(即AGC功能)。该文提出了一种基于FPGA的数字AGC实现方法,给出了具体的硬件电路和详细实现算法。仿真分析和实验结果均表明,该数字AGC系统具有响应时间短、增益调节精度高、系统参数控制灵活的特点。 相似文献
5.
6.
数字中频AGC的快速算法设计 总被引:2,自引:0,他引:2
软件无线电是当前无线通信领域的一个热点。在基于软件无线电的数字中频接收机(DIFR)中,由于现有A/D芯片的动态范围不足以满足系统需求,需要使用自动增益控制(AGC)电路对输入的中频信号进行预处理。本文提出了一种全数字化AGC的快速算法,给出了详细的算法实现过程和仿真结果。该算法计算简单、运算量小,易于用DSP实现。仿真结果显示,该AGC具有响应时间短、调节精度高的特点,适用于大动态环境下对中频信号的快速调整。 相似文献
7.
8.
9.
梁娟 《计算机测量与控制》2017,25(7):264-268
在无线接收机中,天线接收的信号强度往往变化很大,自动增益控制环路(automatic gain control,AGC)根据这个信号强度来动态调节控制放大器的增益,向后级基带电路(如ADC)提供幅度恒定的信号,使得接受到的不同强度信号均能被正确接收和解调;为了达到通过识别接收机接收信号的强度动态调节放大器的增益,以实现输出信号幅度恒定的目的,文章基于TSMC90nm CMOS工艺着重论述了针对70 MHz中频信号的AGC电路设计过程,详细设计了AGC各模块电路,并从提高线性度、降低直流失调和提高稳定性等方面对电路进行了优化,主要介绍AGC芯片的版图设计并进行了后仿,给出了整个AGC系统的工作特性和各项指标;在电路设计过程中,针对线性度、输出信号幅度、增益控制范围等进行改进与优化,得到符合设计指标的电路结构;最后对AGC环路的性能进行仿真验证,得到该AGC在满足输出信号幅度和线性度的基础上达到了30 dB的动态范围,满足了接收机系统的要求。 相似文献
10.
11.
12.
13.
14.
15.
16.
分析了两种AGC控制算法的工作原理及其性质,特别是对锁定工作方式下如何处理各种附加信号作了讨论。分析了某厂引进设备中AGC系统存在的问题及改进措施。 相似文献
17.
经济调度是自动发电控制中的重要环节,对电力系统运行成本的控制具有较大意义。作为经济调度核心的机组优化问题涉及层面广,解决难度大,各种优化算法不断应用到该领域中,并取得了一定的成效。本文以遗传算法作为基础,将其运用于AGC的机组调配研究中,对比整数规划算法,初步验证了遗传算法在AGC降低成本方面的优越性。 相似文献
18.
数字商品非法复制的检测算法 总被引:12,自引:0,他引:12
数字商品,即以数字方式存在的商品,主要有正方,图像,视频和音频等4种形式,在Internet电子商务环境下,数字商品很容易被非法复制和扩散,这无疑会妨碍电子商务的健康发展,本文试图解决电子商务环境下数字正文的非法复制和扩散问题,文中首先提出了一种数字正文的多层次,多粒度表示方法,然后,在此基础上给出了相应的重叠性度量算法。该方法不但能较为准确地检测等价复制,超集复制和移位整体复制这样的数字正文整体非法复制行为,而且还能检测诸如集复制和移位局部复制等部分非法复制行为,同时,该算法也具有较强的扩展性。文章从5个不同的方面对提出的方法进行测试,实验结果表明该算法是有效的。 相似文献
19.
Vincent Wang 《International journal of remote sensing》2013,34(23):8727-8747
ABSTRACTIt is necessary to estimate carbon (C) stored in urban vegetation for the purpose of carbon accounting and trading. This study aims to develop a refined method for reliably estimating above-ground carbon (AGC) stock of urban vegetation from integrated WorldView-2 imagery and Light Detection And Ranging (LiDAR) data in Auckland, New Zealand. Also assessed in this study is the impact of image resolution on regional AGC estimates by vegetation type. The integration of WorldView-2 imagery with a 2-m digital surface model produced from LiDAR data enables urban vegetation to be mapped into trees (101.5 km2), shrubs (64.9 km2), and grasses (172.2 km2) at a producer’s accuracy over 95.9%. The AGC stock of trees, shrubs and grasses is estimated at 1,134,287, 207,606, and 127,427 Mg C, respectively, from the vegetation map. Overall, the total AGC of all types of vegetation does not vary significantly with image spatial resolution over the range of 5 to 30 m if estimated using the same model. This is because high AGC densities are generalised at a coarser resolution, but the larger pixel size compensates for the decrease. Although the spatial resolution does not affect the most significant spectral predicators of plot-level AGC noticeably, it has an obvious effect on both model accuracy and complexity. Thus, the impact of image resolution on AGC would be pronounced if it were estimated using different models that were the best at a given resolution. Of the three vegetation types, the AGC of shrubs is the most variable with spatial resolution, followed by trees. Thus, the AGC of relatively small but more spatially fragmented vegetation parcels is more susceptible to change in image spatial resolution. The estimation model based on spectral features of vegetation has the lowest room-mean-square-error at 15 m. More research is needed to confirm whether it is true in other natural environments in future studies. 相似文献