A new OTA-C current-mode biquad filter with single input and multiple outputs

A new current-mode biquad-filtering circuit with single input and multi-outputs based on operational transconductance amplifier (OTA) is presented using three OTAs, two grounded capacitors and one grounded resistor, it can simultaneously realize second-order lowpass, bandpass, highpass, notch and allpass filters. The characteristic parameters can be adjusted orthogonally by a bias current of OTA and all capacitors are gounded. Morever, the circuit enjoys low sensitivities.     

Universal current filter with single input and three outputs using MOCCIIs

A universal current-mode biquadratic filter with single input and three outputs using three multiple outputs second-generation current conveyors (MOCCIIs), four resistors and two grounded capacitors is presented. The filter can realize lowpass, highpass and bandpass responses, simultaneously. The notch and allpass responses can also be obtained by interconnection of relevant output currents.     

Universal active current filter with single input and three outputs using CCIIs

A universal active filter with current gain and with single input and three outputs using second-generation current conveyors (CCIIs) is presented. The proposed circuit offers the following advantageous features: independent control of omega /sub 0/, Q and current gain through separate grounded resistors, use of only two grounded capacitors making it ideal for integration, and no requirements of critical matching condition/cancellation constraints in realising the lowpass, bandpass, highpass and notch filter responses.<>     

High output impedance current-mode universal filter employing dual-output current-controlled conveyors and grounded capacitors

A novel current-controlled two-input three-output current-mode universal filter, which employs only three dual-output controlled-controlled current conveyors (DOCCCIIs) and two grounded capacitors, is presented in this paper. The proposed configuration provides inverting-type lowpass, noninverting-type lowpass, inverting-type bandpass, noninverting-type bandpass, highpass, bandstop and allpass current responses at a high impedance terminal, which enable easy cascadability. The filter also offers an independent electronic control of the natural frequency ω_o and the parameter ω_o/Q through adjusting the bias current of the DOCCCII. No critical matching condition is required for realizing all the filter responses, and all the incremental parameter sensitivities are low. The performances of the proposed circuit are simulated with PSPICE to confirm the presented theory.     

Universal three input and one output current-mode filter withoutexternal passive elements

A new current-mode universal filter is proposed. The filter uses only operational amplifiers and operational transconductance amplifiers (OTAs) and can realise lowpass, highpass, bandpass, notch and allpass responses without changing circuit topology. The parameters ω₀, ω₀/Q₀, and the gain can be electronically tuned by adjusting the bias currents of the OTAs. The proposed circuit has low sensitivity     

Voltage-mode universal filter with one input and five outputs using DDCCTAs and all-grounded passive components

This paper presents a versatile voltage-mode universal active filter with one input and five output terminals. The proposed circuit is based on using the recently reported active building block, namely differential difference current conveyor transconductance amplifier (DDCCTA). It employs two DDCCTAs as active elements together with two resistors and two capacitors as passive elements, which are all grounded. The circuit simultaneously realizes all the five standard biquadratic filter functions; i.e., lowpass (LP), bandpass (BP), highpass (HP), bandstop (BS) and allpass (AP), without changing circuit topology. The proposed circuit also has the advantage of high-input impedance terminal, and exhibits electronic tunability of its important parameters through the bias current of the DDCCTA as well as low sensitivity performance. PSPICE simulations using 0.5 μm MIETEC CMOS process are used to validate the theoretical predictions.     

New voltage-model/current-mode universal biquad filter using unity-gain cells

A new universal biquad filter is presented which can realize all the five standard filter functions namely lowpass, bandpass, highpass, notch and allpass in voltage-mode (VM) as well as in current-mode (CM) employing only unity-gain cells (i.e. voltage followers and current followers) as active elements. Explicit VM/CM outputs are available from low output impedance terminals and high output impedance terminals, respectively. The workability of the proposed universal biquad, realized with CMOS unity-gain cells, is established by SPICE simulations.     

用于便携式GPS接收机中的5.4mW低噪声高增益CMOS射频前端电路设计

设计了应用于便携式GPS接收机射频前端中的CMOS低噪声放大器和正交混频器. 该电路中的低噪声放大器采用带源端电感负反馈的输入级,并引入功耗约束下的噪声和输入同时匹配技术. 正交混频器基于吉尔伯特单元. 电路采用TSMC 0.18μm RF CMOS工艺实现,总的电压转换增益为35dB,级联噪声系数为2.4dB,输入1dB压缩点为-22dBm,输入匹配良好,输入回损为-22.3dB, 在1.8V电压供电下,整个全差分电路功耗为5.4mW.     

用于便携式GPS接收机中的5.4mW低噪声高增益CMOS射频前端电路设计

设计了应用于便携式GPS接收机射频前端中的CMOS低噪声放大器和正交混频器.该电路中的低噪声放大器采用带源端电感负反馈的输入级,并引入功耗约束下的噪声和输入同时匹配技术.正交混频器基于吉尔伯特单元.电路采用TSMC 0.18μm RFCMOS工艺实现,总的电压转换增益为35dB,级联噪声系数为2.4dB,输入ldB压缩点为-22dBm,输入匹配良好,输入回损为-22.3dB,在1.8V电压供电下,整个全差分电路功耗为5.4mW.     

New electronically tunable current-mode universal biquad filter using translinear current conveyors

In this study, a new electronically tunable current-mode universal filter with two inputs and two outputs employing one translinear current conveyor, one translinear current conveyor with controlled current gain and two grounded capacitors is presented. The proposed circuit offers the following attractive features: realisation of low-pass, band-pass, high-pass, band-stop and all-pass current responses from the same configuration; employment of the minimum active and passive components; no requirement of component matching conditions; independent current-control of the parameters natural frequency (ω_o) and quality factor (Q); low active and passive sensitivities; and high impedance output. The characteristics of the proposed circuit are simulated using PSPICE to confirm the theory.     

New voltage-mode universal filter and sinusoidal oscillator using only single DBTA

In this article, a new voltage-mode second-order universal frequency filter and sinusoidal oscillator using only single differential-input buffered and transconductance amplifier (DBTA) is presented. The proposed voltage-mode filter structure using single DBTA and four passive elements can provide all standard filter functions, i.e. low-, band-, high-pass, band-stop, and all-pass without changing the circuit topology and enables independent control of the quality factor Q using single passive element. The circuit requires the minimal number of active and passive elements with no conditions for component matching. By slight modification of the proposed filter structure, the new DBTA-based sinusoidal oscillator is easily obtained. The oscillation condition and the oscillation frequency are independently adjustable by different virtually grounded passive elements. The proposed sinusoidal oscillator employs only grounded capacitors. The passive and active sensitivities of all the proposed circuit configurations are low. PSPICE simulations using a BJT realisation of DBTA and experimental results based on commercially available amplifiers OPA860 and MAX436 are included, which prove the workability of the proposed circuits.     

Electronically tunable current-mode biquad filter employing CCCDTAs and grounded capacitors with low input and high output impedance

In this study, a single-input multiple-outputs current-mode analog biquadratic filter, based on current controlled current differencing transconductance amplifier (CCCDTA) is presented. The proposed filter uses two CCCDTAs and two grounded capacitors without any external resistors, which is well suited for integrated circuit implementation. The filter simultaneously gives 3 standard transfer functions, namely, lowpass, highpass and bandpass filters with independent control of quality factor and pole frequency by electronic method. By summing of I_HP and L_LP, the notch filter can be also achieved. Moreover, the circuit has low input and high output impedance which would be an ideal choice for cascading in current-mode circuit. The PSPICE simulation results are included verifying the workability of the proposed filter. The given results agree well with the theoretical anticipation.     

An analytic expression for the magnitudes of the signal and intermodulation outputs of an ideal hard limiter,assuming n input signals plus gaussian noise

An expression is derived that gives the output fundamental and intermodulation product magnitudes for an ideal hard limiter, for the case of n input signals plus Gaussian noise. The expression is derived by building upon previous work by Shimbo⁴ to account for the Gaussian noise input. The expression is implemented in a computational tool. Results are generated and are compared with data generated by Jain⁵ for three-signal suppression, and by Blachman¹¹ for the functional relationship between the output and input SNR for a bandpass limiter. In all cases, the data generated agree extremely well with published results.     

Low power and high gain current reuse LNA with modified input matching and inter-stage inductors

In this paper we present a fully integrated current reuse CMOS LNA (low noise amplifier) with modified input matching circuitry and inductive inter-stage architecture in 0.18 μm CMOS technology. To reduce the large spiral inductors that actually require larger surface area for their fabrication, two parallel LC circuits are used with two small spiral on-chip inductors. Using cascode configuration equipped by parallel inter-stage LCs, we achieved lower power consumption with higher power gain. In this configuration we used two cascoded transistors to have a good output swing suitable for low voltage technology compared to other current reuse configurations. This configuration provides better input matching, lower noise figure and more reverse isolation which is vital in LNA design. Complete analytical simulation of the circuit results in center frequency of 5.5 GHz, with 1.9 dB NF, 50 Ω input impedance, 1 GHz 3 dB power bandwidth, 20.5 dB power gain (S₂₁), high reverse isolation (S₁₂)<−48 dB, −18.5 dB input matching (S₁₁) and −21.3 dB output matching (S₂₂), while dissipating as low power as 2 mW at 1.8 V power supply.     

基于CMOS工艺的RFID双频低噪声放大器设计与仿真

设计出一种可应用于RFID系统,同时工作在915 MHz和2.45 GHz的双频段低噪声放大器.该设计以最大程度降低噪声为目标,采用并联LC网络替代传统单一高感值电感,并引入电流复用技术,最终实现高增益低功耗的双频段低噪声放大器的设计目标.仿真结果如下:在915MHz和2.45GHz的频率下,噪声系数均小于0.6dB;S(1,1)小于—15dB;S(2,2)小于—11dB;输入驻波比≤1.4;输出驻波比≤1.8;1dB压缩点约为—16.5dBm.仿真结果表明,在两个频段中的测试结果均优于预期指标的要求,为实际双频段低噪声放大器的设计及优化提供参考。     

Compact dual-band open-stub bandstop filter with suppression of spurious passbands

In this article, by replacing the series quarter-wavelength connecting line of conventional open-stub bandstop filter (BSF) with the equivalent P-shaped line, a compact dual-band BSF is proposed and designed. Furthermore, it suppresses a lot of spurious passbands of the open-stub BSF. Design equations of P-shaped line are achieved by ABCD matrixes. To validate the design concept, two full-wave electromagnetic simulators are used and the proposed filter is fabricated. The simulate results are in excellent agreement with measurement results. The circuit area of the dual-band BSF is only 50% of the conventional open-stub BSF.     

一种输入输出轨到轨的电流模式仪表放大器设计

本文提出了一种基于标准CMOS工艺的电流模式仪表放大器.该放大器内部运放采用斩波调制技术去除低频1/f噪声和失调,并采用正、负电荷泵,使系统具有轨到轨的输入能力.芯片使用TSMC 0.25μm CMOS混合信号工艺模型设计并流片.测试结果表明,使用60kHz的斩波频率,系统增益为40dB时,具有100dB的共模抑制比和...     

High input impedance voltage-mode universal biquadratic filter using two OTAs and one CCII

A three-input and single-output voltage-mode universal biquadratic filter with high input impedance, using only two operational transconductance amplifiers (OTAs), one plus-type second-generation current conveyor (CCII) and two capacitors, is presented. The proposed circuit can realize all the standard filter responses, that is, highpass, bandpass, lowpass, notch and allpass filters, from the same configuration. The proposed circuit has no requirements for component matching conditions.     

Comment: universal voltage-mode filter with three inputs and oneoutput using three current conveyors and one voltage follower

This Comment relates to our recently published Letter (1994) which presents a universal voltage-mode filter with three inputs and one output using three current conveyors, voltage follower, two capacitors and three resistors. It is shown that if we discard one current conveyor from the proposed universal filter configuration, then we obtain a simpler universal voltage-mode filter with three inputs and one output