金属栅/高k基FinFET研究进展

对比传统的平面型晶体管,总结了三维立体结构FinFET器件的结构特性。结合MOS器件栅介质材料研究进展,分别从纯硅基、多晶硅/高k基以及金属栅/高k基三个阶段综述了Fin-FET器件的发展历程,分析了各阶段FinFET器件的材料特性及其在等比缩小时所面临的关键问题,并着重从延迟时间、可靠性和功耗三方面分析了金属栅/高k基FinFET应用于22 nm器件的性能优势。基于短沟道效应以及界面态对器件性能的影响,探讨了FinFET器件尺寸等比缩小可能产生的负面效应及其解决办法。分析了FinFET器件下一步可能的发展方向,主要为高迁移率沟道材料、立体型栅结构以及基于新原理的电子器件。     

On the Suitability of a High- $k$ Gate Dielectric in Nanoscale FinFET CMOS Technology

The impact of a high-k gate dielectric on the device and circuit performances of nanoscale double-gate (DG) FinFET CMOS technology is examined via physics-based device/circuit simulations. DG FinFETs are designed with high k at the high- performance 45-nm node of the 2005 Semiconductor Industry Association International Technology Roadmap for Semiconductors (ITRS; L_g = 18 nm), and are compared with a pragmatic design in which the traditional SiON (or SiO₂) gate dielectric is retained and kept relatively thick to avoid excessive gate tunneling current. Whereas it is presumed that a high-k dielectric, if and when adequately integrated, will significantly enhance CMOS scalability and performance, we show that there are heretofore unacknowledged compromising effects associated with it that undermine this enhancement. In fact, our results show that for DG FinFET CMOS, a high-k gate dielectric actually undermines speed performance while giving little improvement in scalability relative to the pragmatic design, whereas the latter can be scaled, with good performance, to the end of the ITRS.     

Impact of high-k gate dielectric on analog and RF performance of nanoscale DG-MOSFET

Now a days, high-k dielectrics have been investigated as an alternative to Silicon dioxide (SiO₂) based gate dielectric for nanoscale semiconductor devices. This paper is an attempt to characterize the analog and RF performance of the high-k metal gate (HKMG) double gate (DG) metal oxide semiconductor field effect transistor (MOSFET) in nanoscale through 2-D device simulation. The results demonstrates the impact of high-k oxide layer as single and gate stack (GS). The key idea behind this investigation is to provide a physical explanation for the improved analog and RF performance exhibited by the device. The major figures of merit (FOMs) studied in this paper are transconductance (g_m), output conductance (g_d), transconductance generation factor (g_m/I_D), early voltage (V_EA), intrinsic gain (A_V), cut off frequency (f_T), transconductance frequency product (TFP), gain frequency product (GFP) and gain transconductance frequency product (GTFP). The effects of downscaling of channel length (L) on analog performance of the proposed devices have also been presented. It has been observed that the performance enhancement of GS configurations (k=7.5 i.e device D5 in the study) is encouraging as far as the nanoscale DG-MOSFET is concerned. Also it significantly reduces the short channel effects (SCEs). Parameters like DC gain of (91.257 dB, 43.436 dB), nearly ideal values (39.765 V⁻¹, 39.589 V⁻¹) of TGF, an early voltage of (2.73 V, 16.897 V), cutoff frequency (294 GHz, 515.5 GHz) and GTFP of (5.14×10⁵ GHz/V, 1.72×10⁵ GHz/V) for two different values of V_DS=0.1 V and 0.5 V respectively are found to be close to ideal values. Analysis shows an opportunity for realizing high performance analog and RF circuits with the device proposed in this paper i.e. device D5.     

Impact of gate metal work-function engineering for enhancement of subthreshold analog/RF performance of underlap dual material gate DG-FET

This work presents a systematic comparative study of analog/RF performance for underlap dual material gate (U-DMG) DG NMOSFET. In previous works, improved device performances have been achieved by use of high dielectric constant (k) spacer material. Although high-k spacers improve device performance, the intrinsic gain of the device reduces. For the analog circuits applications intrinsic gain is an important parameter. Hence, an optimized spacer material having dielectric constant, k = 7.5 has been used in this study and the gain is improved further by dual-material gate (DMG) technology. In this paper we have also studied the effect of gate material having different work function on the U-DMG DG NMOSFETs. This device exploits a step function type channel potential created by DMG for performance improvement. Different parameters such as the transconductance (g_m), the gain per unit current (g_m/I_ds), the intrinsic gain (g_mR_o), the intrinsic capacitance, the intrinsic resistance, the transport delay and, the inductance of the device have been analyzed for analog and RF performance analysis. Analysis suggested that the average intrinsic gain, g_m/I_d and g_m are increase by 22.988%, 16.10% and 27.871% respectively compared to the underlap single-material gate U-DG NMOSFET.     

High‐Performance,Air‐Stable,Top‐Gate,p‐Channel WSe2 Field‐Effect Transistor with Fluoropolymer Buffer Layer

High‐performance, air‐stable, p‐channel WSe₂ top‐gate field‐effect transistors (FETs) using a bilayer gate dielectric composed of high‐ and low‐k dielectrics are reported. Using only a high‐k Al₂O₃ as the top‐gate dielectric generally degrades the electrical properties of p‐channel WSe₂, therefore, a thin fluoropolymer (Cytop) as a buffer layer to protect the 2D channel from high‐k oxide forming is deposited. As a result, a top‐gate‐patterned 2D WSe₂ FET is realized. The top‐gate p‐channel WSe₂ FET demonstrates a high hole mobility of 100 cm²_­ V^?1 s^?1 and a I_ON/I_OFF ratio > 10⁷ at low gate voltages (V_GS ca. ?4 V) and a drain voltage (V_DS) of ?1 V on a glass substrate. Furthermore, the top‐gate FET shows a very good stability in ambient air with a relative humidity of 45% for 7 days after device fabrication. Our approach of creating a high‐k oxide/low‐k organic bilayer dielectric is advantageous over single‐layer high‐k dielectrics for top‐gate p‐channel WSe₂ FETs, which will lead the way toward future electronic nanodevices and their integration.     

Analog performance of standard and strained triple-gate silicon-on-insulator nFinFETs

This work shows a comparison between the analog performance of standard and strained Si n-type triple-gate FinFETs with high-κ dielectrics and TiN gate material. Different channel lengths and fin widths are studied. It is demonstrated that both standard and strained FinFETs with short channel length and narrow fins have similar analog properties, whereas the increase of the channel length degrades the early voltage of the strained devices, consequently decreasing the device intrinsic voltage gain with respect to standard ones. Narrow strained FinFETs with long channel show a degradation of the Early voltage if compared to standard ones suggesting that strained devices are more subjected to the channel length modulation effect.     

Study of gate dielectric permittivity variation with different equivalent oxide thickness on channel engineered deep sub-micrometer n-MOSFET device for mixed signal applications

The impact of high permittivity gate dielectrics with different equivalent oxide thickness (EOT) for conventional, low and high tilt angle halo implants on the performance of 100 nm n-MOSFETs device is studied using device simulator Synopsys ISE-TCAD. In this paper, we systematically increase the value of gate dielectric (3.9-50) and investigate its effects on conventional, low angle of tilt (10^o) and high angle of tilt (50^o) halo implants for different device parameters of 100 nm n-MOSFETs using two different EOT viz. 1.5 nm and 2.0 nm. The impact of gate dielectric permittivity along with the different angles of halo implants on short channel performance contributing to the DIBL, the subthreshold swing, I_ON/I_OFF ratio, and the threshold voltage V_T are studied for two different EOT thicknesses. The device has been investigated for digital performance parameters like the variation of substrate-body voltage on DIBL, I_OFF, I_ON and the threshold voltage V_T for sub 100 nm technology generation. It has also been investigated for analog performance like trans-conductance generation factor (gm/I_D) and overall gain (gmR₀).     

先进的Hf基高k栅介质研究进展

随着CMOS器件特征尺寸的不断缩小,SiO2作为栅介质材料已不能满足集成电路技术高速发展的需求,利用高k栅介质取代SiO2栅介质成为微电子技术发展的必然.但是,被认为最有希望替代SiO2的HfO2由于结晶温度低等缺点,很难集成于现有的CMOS工艺中,新型Hf基高k栅介质的研究成为当务之急.据报道,在HfO2中引入N、Si、Al和Ta可大大改善其热力学稳定性,由此形成的高k栅介质具有优良的电学特性,基本上满足器件的要求.本文综述了这类先进的Hf基高k栅介质材料的最新研究进展.     

Electrical and material property enhancement in HfTaSiON-gated MOS devices by tuning Hf composition

High dielectric constant (high-k) materials, as a replacement for conventional gate dielectrics, have been proposed to overcome the problem of excessive gate leakage current. HfSiON is a potential high-k gate dielectric material, but the value of its dielectric constant is considered a little too low. In this work, we incorporate Ta into HfSiON to form a HfTaSiON gate dielectric. The influences of different Hf contents in HfTaSiON and various post deposition anneal (PDA) treatments were studied in detail. Experimental results show thatimprovements on the material and electrical properties of metal-oxide-semiconductor (MOS) devices such as crystallization temperature, interface quality between high-k dielectric/Si, hysteresis, stress-induced leakage current (SILC) and interface trap density (D_it) are achieved with incorporating a suitable amount of Hf in HfTaSiON high-k gate dielectric     

Evaluation of process parameter space of bulk FinFETs using 3D TCAD

Using full 3D TCAD, an evaluation of process parameter space of bulk FinFET is presented from the point of view of DRAM, SRAM and I/O applications. Process and device simulations are performed with varying uniform fin doping, anti-punch implant dose and energy, fin width, fin height and gate oxide thickness. Bulk FinFET architecture with anti-punch implant is introduced beneath the channel region to reduce the punch-through and junction leakage. For 30 nm bulk FinFET, anti-punch implant with low energy of 15 to 25 keV and dose of 5.0 × 10¹³ to 1.0 × 10¹⁴ cm⁻² is beneficial to effectively suppress the punch-through leakage with reduced GIDL and short channel effects. Our simulations show that bulk FinFETs are approximately independent of back bias effect. With identical fin geometry, bulk FinFETs with anti-punch implant show same I_ON-I_OFF behavior and approximately equal short channel effects like SOI FinFETs.     

高k介质在浮栅型非挥发性存储器中的应用

随着微电子技术节点不断向前推进,基于传统浮栅结构的非挥发性存储器(NVM)技术遇到严重的技术难点,其中最主要的问题是SiO2隧穿层已经接近厚度极限,很难继续减薄.作为改进措施,引入高k介质作为新型隧穿层材料.文章介绍了高k材料的研究现状和在NVM器件中应用所取得的进展;最后,对高k介质进一步应用的研究趋势进行了展望.     

GaAs-based metal-oxide semiconductor field-effect transistors with Al2O3 gate dielectrics grown by atomic layer deposition

We demonstrate GaAs-based, metal-oxide-semiconductor field-effect transistors (MOSFETs) with excellent performance using an Al₂O₃ gate dielectric, deposited by atomic layer deposition (ALD). This achievement is very significant because Al₂O₃ possesses highly desirable physical and electrical properties as a gate dielectric. These MOSFET devices exhibit extremely low gate-leakage current, high transconductance, and high dielectric breakdown strength. A short-circuit, current-gain, cutoff frequency (f_T) of 14 GHz and a maximum oscillation frequency (f_max) of 25.2 GHz have been achieved from a 0.65-μm gate-length device. The interface trap density (D_it) of Al₂O₃/GaAs is evaluated by the hysteresis of drain-source current, I_ds, versus gate-source bias, V_gs, and the frequency dispersion of transconductance, g_m.     

Selection of rare earth silicates for highly scaled gate dielectrics

An aggressive equivalent oxide thickness (EOT) scaling with high-k gate dielectrics has been demonstrated by ultra-thin La₂O₃ gate dielectric with a proper selection of rare earth (La-, Ce- and Pr-) silicates as an interfacial layer. Among silicates, Ce-silicate has shown the lowest interface-state density as low as 10¹¹ cmv⁻²/eV with a high dielectric constant over 20. n-Type field-effect transistor (FET) with a small EOT of 0.51 nm has been successfully fabricated with a La₂O₃ gate dielectric on a Ce-silicate interfacial layer after annealing at 500 °C. Negative shift in threshold voltage and reduced effective electron mobility has indicated the presence of fixed charges in the dielectric. Nonetheless, the high dielectric constant and nice interfacial property of Ce-silicate can be advantageous for the interfacial layer in highly scaled gate dielectrics.     

在metal/high-k 栅叠层中插入Ti/TiN金属层实现远距离吸氧技术

High permittivity materials have been required to replace traditional SiO₂ as the gate dielectric to extend Moore’s law.However,growth of a thin SiO₂-like interfacial layer（IL） is almost unavoidable during the deposition or subsequent high temperature annealing.This limits the scaling benefits of incorporating high-k dielectrics into transistors.In this work,a promising approach,in which an O-scavenging metal layer and a barrier layer preventing scavenged metal diffusing into the high-k gate dielectric are used to engineer the thickness of the IL,is reported. Using a Ti scavenging layer and TiN barrier layer on a HfO₂ dielectric,the effective removal of the IL and almost no Ti diffusing into the HfO₂ have been confirmed by high resolution transmission electron microscopy and X-ray photoelectron spectroscopy.     

Effect of gate engineering in submicron GaAs MESFET for microwave frequency applications

We present an approach of GaAs MESFET incorporating the gate engineering effect to improve immunity against the short channel effects in order to enhance the scaling capability and the device performance for microwave frequency applications. In this context, a physics-based model for I–V characteristics and various microwave characteristics such as transconductance, cut-off frequency and maximum frequency of oscillation of submicron triple material gate(TM) GaAs MESFET are developed. The reduced short channel effects have also been discussed in combined designs i.e. TM, DM and SM in order to show the impact of our approach on the GaAs MESFETs-based device design. The proposed analytical models have been verified by their good agreement with 2D numerical simulations. The models developed in this paper will be useful for submicron and microwave analysis for circuit design.     

Gate-edge charges related effects and performance degradation in advanced multiple-gate MOSFETs

This paper analyzes the influence of negative charges (NC) located at the gate edges on the advanced MOSFETs behavior, paying particular attention to the subthreshold slope, S, maximum transconductance, G_mmax, and analog figures of merit, such as transconductance over drain current ratio, G_m/I_D, output conductance, G_D, Early voltage, V_EA, and intrinsic gain. General trends obtained by two-dimensional numerical simulations on double-gate (DG) structures are whenever possible qualitatively correlated with experimental data obtained on FinFETs. We show that the presence of negative charges at the gate edges while degrading the subthreshold behavior and analog figures of merit (especially for long-channel devices) can result in apparent improved control of short-channel effects and higher G_mmax. The origin of such twofold impact of negative charges at the gate edges on the device behavior is also analyzed by 2-D device simulations and a simplified two-transistors model.     

Study of fin tapering effect in nanoscale symmetric dual-k spacer (SDS) hybrid FinFETs

Symmetric Dual-k Spacer (SDS) Hybrid FinFETs is a novel device, which combines three significant technologies i.e., 2-D ultra-thin-body (UTB), 3-D FinFET, and symmetric spacer engineering on a single silicon on insulator (SOI) platform. For the first time, this article systematically analyzes the impacts of non-rectangular fin shape on various performance metrics of SDS Hybrid FinFETs. Under distinctive inclination fin angles as prescribed by the process technology, the performances of the device at different fin heights are examined. This work evaluates the response of fin tapering as well as fin height on parameters like threshold voltage (V_th), subthreshold slope (SS), on current (I_on), transconductance (g_m), transconductance generation factor (TGF), and total gate capacitance (C_gg) in SDS Hybrid FinFETs. Optimum structural configuration is thus proposed to fabricate the hybrid device in sub-20 nm FinFET architecture.     

栅长为83-nm的毫米波低噪声InP基PHEMTs的研制

本文设计并实现了一种83-nm T型栅的InP基In0.52Al0.48As/In0.65Ga0.35As赝配高电子迁移率晶体管（PHEMT）。该器件的总栅宽为2×30μm,展现了良好的DC直流、RF射频以及低噪声特性,包括最大饱和电流密度Idss和最大有效跨导gm,max分别为894mA/mm和1640mS/mm。基于1~110 GHz全频段在片测试的S参数外推获得的最大截止频率ft和最大振荡频率fmax分别为247GHz和392GHz。测得的器件拐点（稳定因子k=1）频率为102GHz,因此,基于拐点外推获得的fmax更加准确。采用冷源法完成器件的在片噪声参数的测试,测得的最小噪声系数NFmin在30GHz时为1dB,相关增益Gass为14.5dB。这些良好结果的获得是由于沟道层中InAs摩尔组分的增加,沟道层厚度的减小,栅长的缩短以及寄生效应的减小。这些优良的特性使得该器件非常适合于毫米波频段低噪声单片集成电路的应用。     

High mobility strained Si0.5Ge0.5/SSOI short channel field effect transistors with TiN/GdScO3 gate stack

Short channel p-type metal-oxide-semiconductor field effect transistors (MOSFETs) with GdScO₃ gate dielectric were fabricated on a quantum well strained Si/strained Si_0.5Ge_0.5/strained Si heterostructure on insulator. Amorphous GdScO₃ layers with a dielectric constant of 24 show small hysteresis and low density of interface states. All devices show good performance with a threshold voltage of 0.585 V, commonly used for the present technology nodes, and high I_on/I_off current ratios. We confirm experimentally the theoretical predictions that the drive current and the transconductance of the biaxially strained (1 0 0) devices are weakly dependent on the channel orientation. The transistor’s hole mobility, extracted using split C-V method on long channel devices, indicates an enhancement of 90% (compared to SiO₂/SOI transistors) at low effective field, with a peak value of 265 cm²/V s. The enhancement is however, only 40% at high electrical fields. We demonstrate that the combination of GdScO₃ dielectric and strained SiGe layer is a promising solution for gate-first high mobility short channel p-MOSFETs.     

Impact of High-k Gate Dielectrics on the Device and Circuit Performance of Nanoscale FinFETs

The impact of high-k gate dielectrics on device short-channel and circuit performance of fin field-effect transistors is studied over a wide range of dielectric permittivities k. It is observed that there is a decrease in the parasitic outer fringe capacitance C_of in addition to an increase in the internal fringe capacitance C_if with high-k dielectrics, which degrades the short-channel effects significantly. It is shown that fin width scaling is the most suitable approach to recover the degradation in the device performance due to high-k integration. Furthermore, from the circuit perspective, for the 32-nm technology generation, the presence of an optimum k for a given target subthreshold leakage current has been identified by various possible approaches such as fin width scaling, fin-doping adjustment, and gate work function engineering