Transport properties of gases through integrally skinned asymmetric composite membranes prepared from date pit powder and polysulfone

Studies were conducted on transport properties and separation performance of date pit/polysulfone composite membranes for CO₂, CH₄, N₂, He, and H₂ gases. Date seeds were obtained and processed into powder. Asymmetric flat sheet membrane was prepared by solvent casting method with 2–10 wt % date pit powder. Membrane characterization was done using high pressure gas permeation, X‐ray diffraction, thermogravimetric, and scanning electron microscope analyses. The separation performance and the plasticization resistance property were evaluated in terms of gas permeability, selectivity, and plasticization pressure, respectively. Time dependent performance properties were evaluated up to a pressure of 40 bar for 75 days. Results obtained showed the highest selectivity values of 1.54 (He/H₂), 3.637 (He/N₂), 2.538 (He/CO₂), 2.779 (He/CH₄), 3.179 (H₂/N₂), 3.907 (H₂/CO₂), 1.519 (CH₄/N₂), 1.650 (CO₂/N₂), and 1.261 (CO₂/CH₄) at 10 bar and 35 °C feed pressure and temperature, respectively. The resulting composite membrane showed about 39.50 and 66.94% increase in the selectivity of He/N₂ and CO₂/CH₄, respectively, as compared to the pure polysulfone membrane. Thus, the membrane composites possess some potentials in membrane gas separation. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43606.     

Efficient helium separation of graphitic carbon nitride membrane

An efficient membrane for helium separation from natural gas is quite crucial for cryogenic industries. However, most experimentally available membranes fail in separating helium from small molecules in natural gas, such as H₂, as well as in ³He/⁴He isotopes separation. Using first-principles calculations, we theoretically demonstrated that the already-synthesized graphitic carbon nitride (g-C₃N₄) has high efficiency in helium separation from the gas molecules (H₂, N₂, CO and CH₄) in natural gas and the noble gas molecules (Ne and Ar). The selectivity of He over H₂ molecule at room temperature is calculated to be as high as 10⁷. More interestingly, the g-C₃N₄ membrane can also serve as a quantum sieving membrane for ³He/⁴He separation with a predicted transmission ratio of 18 at 49 K, thus offers a combined means of both He and ³He isotope separation.     

Metal‐organic framework membrane process for high purity CO2 production

Gas separation by metal‐organic framework (MOF) membranes is an emerging research field. Their commercial application potential is, however, still rarely explored due in part to unsatisfied separation characteristics and difficulty in finding suitable applications. Herein, we report “sharp molecular sieving” properties of high quality isoreticular MOF‐1 (IRMOF‐1) membrane for CO₂ separation from dry, CO₂ enriched CO₂/CH₄, and CO₂/N₂ mixtures. The IRMOF‐1 membranes exhibit CO₂/CH₄ and CO₂/N₂ separation factors of 328 and 410 with CO₂ permeance of 2.55 × 10^?7 and 2.06 × 10^?7 mol m^?2 s^?1 Pa^?1 at feed pressure of 505 kPa and 298 K, respectively. High grade CO₂ is efficiently produced from the industrial or lower grade CO₂ feed gas by this MOF membrane separation process. The demonstrated “sharp molecular sieving” properties of the MOF membranes and their potential application in production of value‐added high purity CO₂ should bring new research and development interest in this field. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3836–3841, 2016     

Incorporation of carbon nanofibers into a Matrimid polymer matrix: Effects on the gas permeability and selectivity properties

Composite membranes containing carbon nanofibers (CNFs) and Matrimid were prepared by a solution‐casting method. Prepared Matrimid–CNF composite membranes were characterized with X‐ray diffraction, thermogravimetric analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and mechanical testing techniques. The mechanical properties of the composite membranes increased over that of the pristine polymeric membranes. To develop a broad fundamental understanding of the connection between the composite architecture and gas‐transport properties, both the gas‐permeability and gas‐separation characteristics were evaluated. The gas‐transport properties of the Matrimid–CNF composite membrane was measured with a single gas‐permeation setup (He, H₂, N₂, CH₄ and CO₂) at ambient temperature with the variable‐volume method. The incorporation of CNFs (0.5–10 wt %) into the Matrimid matrix resulted in approximately a 22% reduction in the gas permeation of various gases, (H₂, He, CO₂, N₂, and CH₄). Moreover, an improvement of 1.5 times in the gas selectivity was observed for CO₂/CH₄, H₂/CH₄, He/CH₄, and H₂/N₂ compared to pristine polymeric membrane. Hence, such polymer–CNF composite membranes could be suitable for gas‐separation applications with high purity requirements. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46019.     

Ultrathin carbon molecular sieve membrane for propylene/propane separation

Ultrathin (down to 300 nm), high quality carbon molecular sieve (CMS) membranes were synthesized on mesoporous γ‐alumina support by pyrolysis of defect free polymer films. The effect of membrane thickness on the micropore structure and gas transport properties of CMS membranes was studied with the feed of He/N₂ and C₃H₆/C₃H₈ mixtures. Gas permeance increases with constant selectivity as the membrane thickness decreases to 520 nm. The 520‐nm CMS membrane exhibits C₃H₆/C₃H₈ mixture selectivity of ～31 and C₃H₆ permeance of ～1.0 × 10^?8 mol m^?2 s^?1 Pa^?1. Both C₃H₈ permeance and He/N₂ selectivity increase, but the permeance of He, N₂, and C₃H₆ and the selectivity of C₃H₆/C₃H₈ decrease with further decrease in membrane thickness from 520 to 300 nm. These results can be explained by the thickness‐dependent chain mobility of the polymer film which yields thinner final CMS membranes with reduction in pore size and possible closure of C₃H₆‐accessible micropores. © 2015 American Institute of Chemical Engineers AIChE J, 62: 491–499, 2016     

CO2‐facilitated transport through poly(N‐vinyl‐γ‐sodium aminobutyrate‐co‐sodium acrylate)/polysulfone composite membranes

Poly(N‐vinyl‐γ‐sodium aminobutyrate‐co‐sodium acrylate) (VSA–SA)/polysulfone (PS) composite membranes were prepared for the separation of CO₂. VSA–SA contained secondary amines and carboxylate ions that could act as carriers for CO₂. At 20°C and 1.06 atm of feed pressure, a VSA–SA/PS composite membrane displayed a pure CO₂ permeation rate of 6.12 × 10^?6 cm³(STP)/cm² s cmHg and a CO₂/CH₄ ideal selectivity of 524.5. In experiments with a mixed gas of 50 vol % CO₂ and 50 vol % CH₄, at 20°C and 1.04 atm of feed pressure, the CO₂ permeation rate was 9.2 × 10^?6 cm³ (STP)/cm² s cmHg, and the selectivity of CO₂/CH₄ was 46.8. Crosslinkages with metal ions were effective for increasing the selectivity. Both the selectivity of CO₂ over CH₄ and the CO₂ permeation rate had a maximum against the carrier concentration. The high CO₂ permeation rate originated from the facilitated transport mechanism, which was confirmed by Fourier transform infrared with attenuated total reflectance techniques. The performance of the membranes prepared in this work had good stability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 275–282, 2006     

The morphology and gas‐separation performance of membranes comprising multiwalled carbon nanotubes/polysulfone–Kapton

The development of desirable chemical structures and properties in nanocomposite membranes involve steps that need to be carefully designed and controlled. This study investigates the effect of adding multiwalled nanotubes (MWNT) on a Kapton–polysulfone composite membrane on the separation of various gas pairs. Data from Fourier transform infrared spectroscopy and scanning electron microscopy confirm that some studies on the Kapton–polysulfone blends are miscible on the molecular level. In fact, the results indicate that the chemical structure of the blend components, the Kapton–polysulfone blend compositions, and the carbon nanotubes play important roles in the transport properties of the resulting membranes. The results of gas permeability tests for the synthesized membranes specify that using a higher percentage of polysulfone (PSF) in blends resulted in membranes with higher ideal selectivity and permeability. Although the addition of nanotubes can increase the permeability of gases, it decreases gas pair selectivity. Furthermore, these outcomes suggest that Kapton–PSF membranes with higher PSF are special candidates for CO₂/CH₄ separation compared to CO₂/N₂ and O₂/N₂ separation. High CH₄, CO₂, N₂, and O₂ permeabilities of 0.35, 6.2, 0.34, and 1.15 bar, respectively, are obtained for the developed Kapton–PSF membranes (25/75%) with the highest percentage of carbon nanotubes (8%), whose values are the highest among all the resultant membranes. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43839.     

钯复合膜的制备及其在氢气氮气分离中的应用

Thin palladium composite membranes were prepared by modified electroless plating method on a-alumina supports and a dense Pd/α-Al2O3 composite membrane with high hydrogen flux, good selectivity for hydrogen was obtained. It was tested in a single gas permeation system for hydrogen permeance and hydrogen selectivity over mtrogen. The hydrogen permeance of the corresponding membrane was ashigh as 2.45×10^-6mol·m^-2·s^-1.Pa^-1 and H2/N2 selectivityover700 at 623K and a pressure difference of 0.1MPa. The-main resistance of the composite membrane to H2 permeation lies in the aluminum ceramic support rather than the thin Pd layer.     

Matrix effect of mixed‐matrix membrane containing CO2‐selective MOFs

Facilitated mixed‐matrix membranes (MMMs) containing Cu‐metal organic frameworks (Cu‐MOFs) with high CO₂ selectivity on an asymmetric polysulfone support were fabricated and examined the effect of gas separation performance using different matrices. An amorphous poly(2‐ethyl‐2‐oxazoline) (POZ) and semicrystalline poly(amide‐6‐b‐ethylene oxide) (PEBAX^®MH 1657) block copolymer were chosen as the polymeric matrix and the effect of the matrix on CO₂ separation for MMMs containing Cu‐MOFs was investigated. The interaction of CO₂ in different matrix was investigated theoretically using the density functional theory method, and it was found that the amide segment in PEBAX would contribute more to the CO₂ solubility than ether segment. The morphological changes were investigated by differential scanning calorimetry, field emission scanning electron microscope and X‐ray diffractometer. The ideal selectivity of CO₂/N₂ was enhanced significantly with the addition of a Cu‐MOF, and the values are higher in the Cu‐MOF/PEBAX MMM compared with that in a POZ based asymmetric MMM. Improvement in the CO₂/N₂ selectivity of a Cu‐MOF/PEBAX MMM was achieved via facilitated transport by the CO₂‐selective Cu‐MOFs due to both their high adsorption selectivity of CO₂ over N₂ and the decreased crystallinity of PEBAX due to the presence of the Cu‐MOFs, which would provide a synergic effect on the CO₂ separation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 132, 42853.     

Dialdehyde polyethylene glycol cross-linked poly(vinyl alcohol) membranes with enhanced CO2/N2 separation performance

The development of carbon dioxide (CO₂) separation technology is crucial for mitigating global climate change and promoting sustainable development. In this study, we successfully synthesized an array of cross-linked poly(vinyl alcohol) (PVA) membranes, xALD-PEG-ALD-c-PVA, with enhanced CO₂/N₂ separation performance by employing dialdehyde polyethylene glycol (ALD-PEG-ALD) as a cross-linker. The formation of the cross-linked network structure not only inhibits the crystallization of PVA but also disrupts hydrogen bonding and thus increases fractional free volume of PVA chains. Under the synergistic effect of these multiple factors, the cross-linked PVA membranes exhibit a significantly improved CO₂ permeability. Moreover, they maintain high CO₂/N₂ selectivity, attributing to the CO₂-philic characteristic of ethylene oxide groups in the cross-linked structure. At the ALD-PEG-ALD content of 1.6 mmol g⁻¹, the xALD-PEG-ALD-c-PVA membrane demonstrates a CO₂ permeability of 41.4 barrer and a CO₂/N₂ selectivity of 57.4 at 2 bar and 25°C. Furthermore, compared with the pristine PVA membrane, xALD-PEG-ALD-c-PVA membranes manifest superior mechanical properties and outstanding separation performance for a CO₂/N₂ (15/85, vol%) gas mixture. The excellent combination of permeability and selectivity makes xALD-PEG-ALD-c-PVA membranes highly promising for various CO₂ separation applications.     

Separation of C2–C4 hydrocarbons from methane by zeolite MFI hollow fiber membranes fabricated from 2D nanosheets

Separation of higher hydrocarbons from methane is an important and energy-intensive operation in natural gas processing. We present a detailed investigation of thin and oriented MFI zeolite membranes fabricated from 2D MFI nanosheets on inexpensive α-alumina hollow fiber supports, particularly for separation of n-butane, propane, and ethane (“natural gas liquids”) from methane. These membranes display high permeances and selectivities for C₂–C₄ hydrocarbons over methane, driven primarily by stronger adsorption of C₂–C₄ hydrocarbons. We study the separation characteristics under unary, binary, ternary, and quaternary mixture conditions at 298 K and 100–900 kPa feed pressures. The membranes are highly effective in quaternary mixture separation at elevated feed pressures, for example allowing n-butane/methane separation factors of 170–280 and n-butane permeances of 710–2,700 GPU over the feed pressure range. We parametrize and apply multicomponent Maxwell–Stefan transport equations to predict the main trends in separation behavior over a range of operating conditions.     

Preparation of vinyl amine‐co‐vinyl alcohol/polysulfone composite membranes and their carbon dioxide facilitated transport properties

A vinyl amine–vinyl alcohol copolymer (VAm–VOH) was synthesized through free‐radical polymerization, basic hydrolysis in methanol, acidic hydrolysis in water, and an anion‐exchange process. In the copolymer, the primary amino groups on the VAm segment acted as the carrier for CO₂‐facilitated transport, and the vinyl alcohol segment was used to reduce the crystallinity and increase the gas permeance. VAm–VOH/polysulfone (PS) composite membranes for CO₂ separation were prepared with the VAm–VOH copolymer as a selective layer and PS ultrafiltration membrane as a support. The membrane gas permselectivity was investigated with CO₂, N₂, and CH₄ pure gases and their binary mixtures. The results show that the CO₂ transport obeyed the facilitated transport mechanism, whereas N₂ and CH₄ followed the solution–diffusion mechanism. The increase in the VAm fraction in the copolymer resulted in a carrier content increase, a crystallinity increase, and intermolecular hydrogen‐bond formation. Because of these factors, the CO₂ permeance and CO₂/N₂ selectivity had maxima with the VAm fraction. At an optimum applied pressure of 0.14 MPa and at an optimum VAm fraction of 54.8%, the highest CO₂ permeance of 189.4 GPU [1 GPU = 1 × 10^?6 cm³(STP) cm^?2 s^?1 cmHg^?1] and a CO₂/N₂ selectivity of 58.9 were obtained for the CO₂/N₂ mixture. The heat treatment was used to improve the CO₂/N₂ selectivity. At an applied pressure of 0.8–0.92 MPa, the membrane heat‐treated under 100°C possessed a CO₂ permeance of 82 GPU and a CO₂/N₂ selectivity of 60.4, whereas the non‐heat‐treated membrane exhibited a CO₂ permeance of 111 GPU and a CO₂/N₂ selectivity of 45. After heat treatment, the CO₂/N₂ selectivity increased obviously, whereas the CO₂ permeance decreased. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40043.     

Size effects of graphene oxide on mixed matrix membranes for CO2 separation

Graphene oxide (GO)‐polyether block amide (PEBA) mixed matrix membranes were fabricated and the effects of GO lateral size on membranes morphologies, microstructures, physicochemical properties, and gas separation performances were systematically investigated. By varying the GO lateral sizes (100–200 nm, 1–2 μm, and 5–10 μm), the polymer chains mobility, as well as the length of the gas channels could be effectively manipulated. Among the as‐prepared membranes, a GO‐PEBA mixed matrix membrane (GO‐M‐PEBA) containing 0.1 wt % medium‐lateral sized (1–2 μm) GO sheets showed the highest CO₂ permeation performance (CO₂ permeability of 110 Barrer and CO₂/N₂ mixed gas selectivity of 80), which transcends the Robeson upper bound. Also, this GO‐PEBA mixed matrix membrane exhibited high stability during long‐term operation testing. Optimized by GO lateral size, the developed GO‐PEBA mixed matrix membrane shows promising potential for industrial implementation of efficient CO₂ capture. © 2016 American Institute of Chemical Engineers AIChE J, 62: 2843–2852, 2016     

Controlled synthesis of high performance carbon/zeolite T composite membrane materials for gas separation

A simple approach has been developed to synthesize the carbon/zeolite T composite membrane materials with the high gas separation performance. The precursors of the composite membrane are composed of polyimide matrix and dispersed zeolite T particles. The composite membranes prepared by pyrolysis at 973 K show excellent gas (H₂, CO₂, O₂, N₂, and CH₄) permeability and selectivity (O₂/N₂, CO₂/CH₄) for both single gas and mixed-gas. The gas separation performance of the composite membranes can be controlled in a wide range by only changing the zeolite T particle size. The maximum selectivity of O₂ over N₂ (21/79 mol%) for the composite membranes with the least zeolite T particle (0.5 μm) is 15 with an O₂ permeability of 347 Barrers (1 Barrer = 7.5 × 10⁻¹⁸ m² s⁻¹ Pa⁻¹) and the selectivity of CO₂ over CH₄ (50/50 mol%) reaches a value of 179 with a CO₂ permeability of 1532 Barrers. It is believed that the increase of gas permeability is attributed to the ordered microchannels in the zeolite and the interfacial gaps formed between zeolite and carbon matrix in the composite membranes. And the gas selectivity is tuned by the size of interfacial gaps which are varied with the zeolite particle size. This technique will provide a simple and convenient route to efficiently improve the trade-off relationship between the permeability and the selectivity and enable the construction of carbon-based composite materials with novel functionalities in membrane science.     

Poly(ether-b-amide)/Tween20 Gel Membranes for CO2/N2 Separation

Poly(ether-b-amide) (PEBA)/Tween20 gel membranes containing from 0 wt% to 65 wt% of Tween20 in PEBA2533, PEBA3533, and PEBA4033 were prepared by solvent casting method for CO₂/N₂ separation. The gas separation properties of the polymeric gel membranes were tested for single gases of CO₂ and N₂ at 25°C with the feed pressure of 0.6 atm. For all pure PEBA membranes, CO₂ and N₂ permeability decreased as the amount of polyamide block increased, but CO₂/N₂ selectivity increased. For PEBA/Tween20 gel membranes, both the CO₂ permeability and CO₂/N₂ selectivity were greatly enhanced with the increase of Tween20 content. For the membrane of PEBA4033/Tween20-65, CO₂/N₂ selectivity, and CO₂ permeability reached 54 and 146 Barrer, respectively, which is very interesting for potential application in CO₂ removal from flue gas.     

Effects of carbonisation on pore evolution and gas permeation properties of carbon membranes from Kapton polyimide

Carbon membranes were prepared by carbonisation of Kapton^® polyimide at different temperatures under vacuum and nitrogen flow. Pore structure development of the membranes during carbonisation was studied. Carbonisation temperature was critical in the modification of membrane structure. At the same temperature, the carbon membranes fabricated under nitrogen atmosphere had higher gas permeances than those fabricated under vacuum. During heat treatment, the value of d-spacing for the carbon membranes decreased with increasing temperature, however, vacuum and nitrogen atmosphere had different influences on the changes in the d-spacing. CO₂ adsorption showed that the carbon membranes prepared at 1273 K under vacuum had the highest micropore volume whilst the membranes prepared at 1073 K under vacuum had the highest characteristic adsorption energy. N₂ adsorption showed that the samples obtained at 873 K under vacuum had the highest nitrogen uptake. Mesopores were deemed to be connected through micropores and narrow channels between meso- and/or micropores were supposedly present. The micropores predominantly controlled the transport properties of the carbon membranes. The membrane samples obtained at 1173 K under vacuum yielded ideal separation factors of 558.27, 60.87, 19.69 and 138.53 for He/N₂, CO₂/N₂, O₂/N₂ and CO₂/CH₄, respectively, with permeances of 7.26, 0.79, 0.26, 0.13 and 0.006 mol/(m² s Pa) for He, CO₂, O₂, N₂ and CH₄, respectively.     

Gas permeation properties of poly(2,5‐benzimidazole) derivative membranes

In this article, three novel polymers based on poly(2,5‐benzimidazole) (ABPBI) were synthesized by introducing propyl, isobutyl or n‐butyl groups to its side chain through an alkyl substitution reaction. FTIR and ¹³C NMR were applied to confirm the formation of corresponding chemical groups. Their physical properties including crystallinity, thermal stability, mechanical strength, and micro‐morphology were also characterized. Their solubility in common solvents were also tested to see if the modification will bring any improvement. Gas permeation properties of three derivative membranes prepared by a casting and solvent‐evaporation method were tested with pure gases including H₂, N₂, O_2, CH₄, and CO₂. It has been revealed that gas with a smaller molecular size owned a larger permeability. This means gas permeation in all prepared membranes should be diffusivity selective. Among all three modified ABPBI membranes, isobutyl substitution modified ABPBI (IBABPBI) showed the best selectivity of H₂ over other gases such as N₂ (～185) and CO₂ (～6.3) with a comparable permeability (～9.33 barrer) when tested at 35°C and 3.0 atm. Testing temperature increase facilitated gas permeation for all three membranes obviously; while in term of gas selectivity temperature increase showed diverse alteration because it brought variable impact on gas solubility of different gases. Even so, IBABPBI membrane still owned acceptable selectivity of H₂ over N₂ (～118) and CO₂ (～6.3) with an almost doubled permeability (～17.5 barrer) when tested at 75°C and 3.0 atm. Additional tests showed that running at high pressure did not bring any obvious deterioration to gas separation performance of IBABPBI membrane. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40440.     

Gas permselection properties in silicone-coated asymmetric polyethersulfone membranes

The gas permeation properties of H₂, He, CO₂, O₂, and N₂ through silicone-coated polyethersulfone (PESf) asymmetric hollow-fiber membranes with different structures were investigated as a function of pressure and temperature and compared with those of PESf dense membrane and silicone rubber (PDMS) membrane. The PESf asymmetric hollow-fiber membranes were prepared from spinning solutions containing N-methyl-2-pyrrolidone as a solvent, with ethanol, 1-propanol, or water as a nonsolvent-additive. Water was also used as both an internal and an external coagulant. A thin silicone rubber film was coated on the external surface of dried PESf hollow-fiber membranes. The apparent structure characteristics of the separation layer (thickness, porosity, and mean pore size) of the asymmetric membranes were determined by gas permeation method and their cross-section morphologies were examined with a scanning electron microscope. The results reveal that the gas pressure normalized fluxes of the five gases in the three silicone-coated PESf asymmetric membranes are nearly independent of pressure and did not exhibit the dual-mode behavior. The activation energies of permeation in the silicone-coated asymmetric membranes may be larger or smaller than those of PESf dense membrane, which is controlled by the membrane physical structure (skin layer and sublayer structure). Permselectivities for the gas pairs H₂/N₂, He/N₂, CO₂/N₂, and O₂/N₂ are also presented and their temperature dependency addressed. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 837–846, 1997     

Ethanol perm‐selective B‐ZSM‐5 zeolite membranes from dilute solutions

Boron‐substituted MFI (B‐ZSM‐5) zeolite membranes with high pervaporation (PV) performance were prepared onto seeded inexpensive macroporous α‐Al₂O₃ supports from dilute solution and explored for the separation of ethanol/water mixtures by PV. The effects of several parameters on microstructures and PV performance of the B‐ZSM‐5 membranes were examined systematically, including the seed size, synthesis temperature, crystallization time, B/Si ratio, H₂O/SiO₂ ratio and silica source. A continuous and compact B‐ZSM‐5 membrane was fabricated from solution containing 1 tetraethyl orthosilicate/0.2 tetrapropylammonium hydroxide/0.06 boric acid/600 H₂O at 448 K for 24 h, showing a separation factor of 55 and a flux of 2.6 kg/m² h along with high reproducibility for a 5 wt % ethanol/water mixture at 333 K. It was demonstrated that the incorporation of boron into mobile five (MFI) structure could increase the hydrophobicity of B‐ZSM‐5 membrane evidenced by the improved contact angle and amount of the adsorbed ethanol, and thus enhance the PV property for ethanol/water mixtures. © 2016 American Institute of Chemical Engineers AIChE J, 62: 2447–2458, 2016     

Preparation of PVDF/CaCO3 hybrid hollow fiber membranes for direct contact membrane distillation through TIPS method

Poly(vinylidene fluoride) (PVDF)–CaCO₃ hybrid hollow fiber membranes with a cellular structure and prominent permeability were fabricated via the thermally induced phase separation method for membrane distillation. CaCO₃ nanoparticles were introduced to the casting solution to improve the properties of the membranes. The effect of CaCO₃ dosage on the morphology was investigated. The prepared membranes were characterized by differential scanning calorimetry, SEM, and atomic force microscopy. The results showed that liquid–liquid phase separation preceded solid–liquid phase separation during the spinning process. Low dosages of CaCO₃ had a strong influence on the crystallization of PVDF molecules. The contact angle of the membrane increased with the addition of CaCO₃ nanoparticles. The maximum dead end pure water flux was as high as 1295.5 L/(m² h). The direct‐contact membrane distillation flux of the optimized PVDF/CaCO₃ hybrid membrane achieved 63.98 kg/(m² h) at the feed temperature of 90 °C. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43372.