Effect of thermal annealing in atmosphere on photoluminescence of BTEO–PPV films

The photoluminescence (PL) spectra of poly[2,5‐bis‐(tri‐ethoxy)‐1,4‐phenylene vinylene] (BTEO–PPV) films are blue‐shifted with increasing thermal annealing temperature. It is known from the UV–vis absorption spectra that thermal annealing decreases the conjugation length of the polymer. For BTEO–PPV films, unlike with MEH–PPV films, the symmetric triethoxy side groups further block aggregation of the polymer chains. The absorption Fourier transfer infrared spectra showed that thermal annealing in atmosphere destroyed the chain structure of BTEO–PPV film by thermal oxidation to form aldehyde groups, which resulted in low PL efficiency of the annealed films. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Novel porphyrin‐grafted poly(phenylene vinylene) derivatives: Synthesis and photovoltaic properties

A series of novel porphyrin‐grafted poly (phenylene vinylene) derivatives, Porp‐RO‐PPV, were synthesized by a simple two‐step method. These copolymers contain conjugated poly(phenylene vinylene) derivatives as polymer backbone and covalently linked porphyrin units as side chain, which were confirmed by FTIR and ¹H NMR, and used for photovoltaic devices. The thermal, optical properties and sensitizing effect, and photovoltaic properties have been investigated. The emission spectra of Porp‐RO‐PPV copolymers revealed the existence of strong energy transfer from PPV backbone to porphyrin units. The energy conversion efficiency (η_e) of photovoltaic devices based on Porp‐RO‐PPV+PCBM reached 0.33% (78.2 mW/cm², AM1.5) and porphyrin units in the copolymers showed good sensitizing effect at low concentration. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Electroluminescence and photovoltaic properties of poly(p‐phenylene vinylene) derivatives with dendritic pendants

A copolymer of dendronized poly(p‐phenylene vinylene) (PPV), poly{2‐[3′,5′‐bis (2′‐ethylhexyloxy) bnenzyloxy]‐1,4‐phenylene vinylene}‐co‐poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylene vinylene] (BE‐co‐MEH–PPV), was synthesized with the Gilch route to improve the electroluminescence and photovoltaic properties of the dendronized PPV homopolymer. The polymer was characterized by ultraviolet–visible absorption spectroscopy, photoluminescence spectroscopy, and electrochemical cyclic voltammetry and compared with the homopolymers poly{2‐[3′, 5′‐bis(2‐ethylhexyloxy) benzyloxy‐1,4‐phenylene vinylene} (BE–PPV) and poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH–PPV). Polymer light‐emitting diodes based on the polymers with the configuration of indium tin oxide (ITO)/poly(3,4‐ethylene dioxythiophene) : poly(styrene sulfonate) (PEDOT : PSS)/polymer/Ca/Al were fabricated. The electroluminescence efficiency of BE‐co‐MEH–PPV reached 1.64 cd/A, which was much higher than that of BE–PPV (0.68 cd/A) and a little higher than that of MEH–PPV (1.59 cd/A). Photovoltaic properties of the polymer were studied with the device configuration of ITO/PEDOT : PSS/polymer : [6,6J‐phenyl‐C₆₁‐butyric acid methyl ester] (PCBM)/Mg/Al. The power conversion efficiency of the device based on the blend of BE‐co‐MEH–PPV and PCBM with a weight ratio of 1 : 3 reached 1.41% under the illumination of air mass 1.5 (AM1.5) (80 mW/cm²), and this was an improvement in comparison with 0.24% for BE–PPV and 1.32% for MEH–PPV under the same experimental conditions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Electrical properties of poly(p‐phenylene vinylene) films with an incorporation of platinum metal nanoparticles

The effects of platinum metal nanoparticles on a conjugated polymer were investigated by monitoring the electronic structures and measuring the electrical properties of poly(p‐phenylene vinylene) (PPV) and PPV/Pt nanocomposites films. Enhanced current density in PPV/Pt nanocomposite films was obtained by the incorporation of Pt nanoparticles into the conjugated polymer PPV. This result agrees well with our observation of an increase in the electron affinity and an increase in roughness with increasing Pt nanoparticle content. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Enhancement of the electrical properties of poly(p‐phenylene vinylene) by the incorporation of silicon dioxide nanoparticles

The electrical properties of a poly(p‐phenylene vinylene) (PPV) conjugated polymer using silver (Ag) as a cathode were improved by the incorporation of silicon dioxide (SiO₂) nanoparticles. The current density of the Ag–PPV/SiO₂ nanocomposite system was higher than that of Ag–PPV. A lower level of interfacial oxidation was found in the Ag–PPV/SiO₂ nanocomposite than in Ag–PPV, confirming that a more complete elimination of residue occurred in the nanocomposite. This was due to the relatively large surface area of the PPV/SiO₂ nanocomposite film and the hydrophilic surface of the SiO₂ nanoparticles. The lower level of oxidation contributed to an improvement in the material's current–voltage characteristics. Morphology‐dependent current–voltage characteristics were enhanced by a large variation in the thickness of the Ag–PPV/SiO₂ nanocomposite film because an increased effective field strength could be induced in the thinner regions of the film. The incorporation of SiO₂ nanoparticles altered the effective film thickness and the amount of residue in the interior of the PPV without disrupting the structure of the conjugated polymer. The Ag cathode created a stable interface with the PPV film layer without causing the formation of an organic–metal complex, which would have obstructed electron injection. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and luminescence properties of new blue‐light‐emitting polyconjugated poly{1,1′‐biphenyl‐4,4′‐diyl‐[1‐(4‐t‐butylphenyl)]vinylene} polymers and copolymers

Three new soluble polyconjugated polymers, all of which emitted blue light in photoluminescence and electroluminescence, were synthesized, and their luminescence properties were studied. The polymers were poly{1,1′‐biphenyl‐4,4′‐diyl‐[1‐(4‐t‐butylphenyl)]vinylene}, poly((9,9‐dioctylfluorene‐2,7‐diyl)‐alt‐{1,4‐phenylene‐[1‐(4‐t‐butylphenyl)vinylene‐1,4‐phenylene]}) [P(DOF‐PVP)], and poly([N‐(2‐ethyl) hexylcarbazole‐3,6‐diyl]‐alt‐{1,4‐phenylene‐[1‐(4‐t‐butylphenyl)]vinylene‐1,4‐phenylene}). The last two polymers had alternating sequences of the two structural units. Among the three polymers, P(DOF‐PVP) performed best in the light‐emitting diode devices of indium–tin oxide/poly(ethylenedioxythiophene) doped with poly(styrene sulfonate) (30 nm)/polymer (150 nm)/Li:Al (100 nm). This might have been correlated with the balance in and magnitude of the mobility of the charge carriers, that is, positive holes and electrons, and also the electronic structure, that is, highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels, of the polymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 307–317, 2006     

Enhancing the electroluminescence properties of novel blue light emitting polymer and MEH‐PPV based white light emitting polymer devices by processing condition optimization

A series of triarylaminooxadiazole‐containing tetraphenylsilane light emitting polymer (PTOA) and poly(2‐methoxy, 5‐(2′‐ethyl‐hexyloxy)‐p‐phenylene‐vinylene) (MEH‐PPV) based white light emitting polymer devices (PLEDs) were fabricated to study blue and orange–red emitter composition and light emitting layer processing effects on white emission electroluminescence properties. Color purity, current turn‐on voltage, brightness, and current efficiency were strongly determined by MEH‐PPV content and the thin film processing condition. The intensity of PTOA blue emission was equal to that of MEH‐PPV orange–red emission when the device was fabricated by a polymer composite film containing 10 wt % of MEH‐PPV. Color purity [Commission Internationale de L'Eclairage (CIE_x,y) coordinates (0.26,0.33)] was nearly white emission under applied 8 V. The brightness and current efficiency of PTOA‐MEH‐PPV composite film based devices increased as MEH‐PPV content increased. Furthermore, white emission blue shifted with increasing spin‐rate of thin film coating and applied voltage. Low turn‐on voltage, high current density, and high brightness were obtained for the device fabricating with light emitting layer coating with high spin‐rate. Moreover, low current efficiency was obtained for the PLED with a thinner light‐emitting layer. A white emission CIE (0.28,0.34) was obtained for PTOA‐MEH‐PPV based white PLED. White PLED brightness and efficiency can be as high as 700 cd/m² and 0.78 cd/A, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis and characterization of novel soluble alternating copoly(phenylene vinylene) derivative for light‐emitting electrochemical cell

A novel alternating copolymer, poly{[2,5‐di(2‐(2‐ethoxy ethoxy)ethoxy)‐1,4‐phenylene vinylene]‐alt‐1,4‐[phenylene vinylene]}, has been synthesized through the Wittig condensation as electroluminescent material. In this copolymer, one component is phenylene vinylene with flexible oligo(ethylene oxide) side chain that facilitates ion transportation and phase miscibility between nonpolar and polar part of composite luminescent layer, and another is a rigid phenylene vinylene moiety to improve luminescent quantum efficiency and tune color. The copolymer shows good solubility and thermal stability for device fabrication compared to poly(phpeylene vinylene)(PPV). The band gap value of copolymer is between those of corresponding homopolymers, which indicates that alternating copolymerization is a suitable way to obtain luminescent polymer with desired band gap. The maximum wavelength of photoluminescence of copolymer is 539 nm (yellowish‐green). The HOMO and LUMO energy levels obtained by cyclic voltammetry measurement indicate that the electron injection ability of copolymer has been greatly improved compared with that of the PPV. A more balanced carrier injection and higher quantum efficiency are proved by electroluminescent properties of corresponding light‐emitting devices. The turn‐on voltage of LEC device (ITO/copolymer + PEO + LiClO₄/Al) is found to be 2.3 V, with current comparative to LED (ITO/copolymer/Al) at 9.5 V. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1350–1356, 2003     

Synthesis,characterization, and photophysical properties of novel poly(p‐phenylene vinylene) derivatives with conjugated thiophene as side chains

Two novel poly(p‐phenylene vinylene) (PPV) derivatives with conjugated thiophene side chains, P1 and P2, were synthesized by Wittig‐Horner reaction. The resulting polymers were characterized by ¹H‐NMR, FTIR, GPC, DSC, TGA, UV–Vis absorption spectroscopy and cyclic voltammetry (CV). The polymers exhibited good thermal stability and film‐forming ability. The absorption spectra of P1 and P2 showed broader absorption band from 300 to 580 nm compared with poly[(p‐phenylene vinylene)‐alt‐(2‐methoxy‐5‐octyloxy‐p‐phenylene vinylene)] (P3) without conjugated thiophene side chains. Cyclic voltammograms displayed that the bandgap was reduced effectively by attaching conjugated thiophene side chains. This kind of polymer appears to be interesting candidates for solar‐cell applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of oxadiazole‐based polymers containing a carbazole–vinylene or fluorene–vinylene group and their hole‐injection/transport behavior in light‐emitting diodes

A series of conjugated (poly{N‐(2‐ethylhexyl)‐3,6‐carbazole–vinylene‐alt‐[(2,5‐bisphenyl)‐1,3,4‐oxadiazole]}) and nonconjugated (poly{N‐(2‐ethylhexyl)‐3,6‐carbazole–vinylene‐alt‐[(2,5‐bisphenol)‐1,3,4‐oxadiazole]}) and poly{9,9‐dihexyl‐2,7‐fluorene–vinylene‐alt‐[(2,5‐bisphenol)‐1,3,4‐oxadiazole]}) polymers containing oxadiazole and carbazole or fluorene moieties in the polymer backbone were synthesized with a multiple‐step procedure. The properties of the polymers, including the photophysical and electrochemical characteristics, could be fine‐tuned by adjustment of the components or structures in the polymer chains. The polymers were used to examine the hole‐injection/transport behavior as hole‐injection/hole‐transport layers in double‐layer indium tin oxide (ITO)/polymer/aluminum tris(8‐hydroxyquinoline)/LiF/Al devices by the determination of their energy levels. The effects of the polymers in these devices on the charge‐transport behavior were compared with a control device fabricated with poly(ethylenedioxythiophene) (PEDOT)–poly(styrene sulfonate) (PSS). Devices containing the synthesized polymers showed comparable adhesion to the ITO anode and good hole‐injection/transport performance. In addition, they exhibited higher electroluminescence over an identical range of current densities than the control device. This was attributed to the prevention of radiative exciton quenching caused by the PEDOT–PSS interfaces and the improvement of electron/exciton blocking due to the higher electron affinity of the synthesized polymers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Well‐Defined End‐Functionalized Conjugated Polymers/Oligomers Exhibiting Unique Emission Properties through the End Groups: The Exclusive Synthesis by Combined Olefin Metathesis with Wittig‐type Coupling

Acyclic diene metathesis polymerization using ruthenium–carbene catalysts affords defect‐free, high molecular weight poly(arylene vinylene)s containing all trans olefinic double bonds. The exclusive end‐functionalization in the resultant poly(fluorene vinylene)s or poly(phenylene vinylene)s can be attained by treating the vinyl end groups using a molybdenum–alkylidene catalyst/reagent (through olefin metathesis) followed by addition of various aldehydes (Wittig‐type coupling). Some of these end‐modified conjugated materials display unique emission properties, which are different from the original ones, through an interaction (energy transfer or structural change in the excited state) between the conjugated main chain and the end groups [oligo(thiophene)s, F‐BODIPY, etc.]. Exclusive synthesis of well‐defined, all‐trans end‐functionalized oligo(2,5‐dialkoxy‐1,4‐phenylene vinylene)s [(oligo(phenylene vinylene), alkoxy = O(CH₂)₂OSiⁱ Pr₃, up to 31 repeat units] is demonstrated by adopting a stepwise synthetic approach (olefin metathesis and the subsequent Wittig‐type cleavage). It is clearly demonstrated that their optical properties (especially the fluorescence spectra including photoluminescence quantum yields) are strongly affected by the end groups as well as the conjugation repeat units.     

Polychromatic light‐emitting conjugated polymer prepared by controlling its structure through active free radical addition

BACKGROUND: The HOMO–LUMO energy level width of conjugated polymers can be manipulated by controlling the conjugation length of the polymeric materials in order to adjust their properties in terms of emission of different colors and realize polychromatic displays. In the work reported in this paper azobisisobutyronitrile (AIBN) was used to control the conjugation length of poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐co‐(1,4‐phenylene vinylene)] (MEH‐PPV) by free radical addition. In this way a series of MEH‐PPV with various conjugation lengths was obtained. RESULTS: Characterization of MEH‐PPV using ¹H NMR and Fourier transform infrared spectroscopy demonstrated that the cyano groups of AIBN hydrolyzed into carboxyls. The carboxyl free radicals attacked the conjugated double bonds of MEH‐PPV, resulting in a decrease of trans‐vinylenes and in an increase of cis‐vinylenes as well as tert‐methyls on the backbone. Changing the conjugated structure of the polymer caused the peaks of UV and fluorescence spectra to shift to the blue. CONCLUSION: The resulting MEH‐PPV derivatives can emit orange‐red, green and blue light. It is expected that they could be used to prepare PPV‐based materials that could modulate white light emission, by simply blending the PPV derivatives emitting different colors. Copyright © 2008 Society of Chemical Industry     

Preparation and photoluminescent characterization of poly(phenylene vinylene)/TiO2 nanoparticles composite nanofibers by one‐step electrospinning

A simple electrospinning progress, directly mixing method, was used to produce ultrafine poly(phenylene vinylene)/TiO₂ (PPV/TiO₂) composite nanofibers with diameters ranging from 100 to 300 nm. The effects of different TiO₂ content on diameter, morphology, and structure of composite fibers were analyzed by scanning electron microscopy and transmission electron microscope. The results showed that composite polymer nanofibers with smooth surface were obtained when TiO₂ concentration was below 18 wt %. The surface of the composite nanofibers became rougher with the increase of TiO₂ content. The optical properties of the as‐prepared nanofibers were characterized by photoluminescence spectra and photographs, the results showed an increase in intensity of the high‐energy shoulder (510 nm) when the concentration of nanoparticles increased. X‐ray diffraction measurements showed that the increasing TiO₂ content enhanced the amorphous phase of PPV in composite nanofibers. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Conjugated copolymers of cyanosubstituted poly(p‐phenylene vinylene) with phenylene ethynylene and thienylene vinylene moieties: Synthesis,optical, and electrochemical properties

Three alternating conjugated copolymers of cyanosubstituted poly(p‐phenylene vinylene) (CN–PPV) with phenylene ethynylene and thienylene vinylene moieties, P1, P2, and P3, were synthesized via cross‐coupling polycondensation with Pd(PPh₃)₂Cl₂ as a catalyst. Their structures were confirmed by ¹H‐NMR, IR spectroscopy, elemental analysis, and gel permeation chromatography, and the thermal, photophysical, and electrochemical properties of the copolymers were also investigated. The incorporation of a triple bond into the CN–PPV backbone led to higher reduction potentials, which corresponded to lower lowest unoccupied molecular orbital energy levels. The three copolymers possessed broader absorption spectra, especially copolymer P3 with its polymerization units containing two thiophene rings, which showed the broadest absorption spectrum, from 300 to 710 nm. Their high electron affinities, broad absorptions, and relatively higher oxidation potentials make the copolymers potentially good electron‐acceptor material for use in photovoltaic devices. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Polymeric coatings for photostability enhancement of poly(p‐phenylene vinylene) derivative films

Poly(p‐phenylene vinylene) (PPV) derivatives are an important class of conjugated polymers, known for their applications as electroluminescent materials for light‐emitting devices and sensors. These derivatives are highly susceptible to photodegradation by the combined action of oxygen and light. Here, the use of various commercial polymers as protective coatings against the photodegradation of PPV derivatives was explored. Cast films of two similar PPV derivatives, poly[(2‐methoxy‐5‐n‐hexyloxy)‐p‐phenylene vinylene] and poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐p‐phenylene vinylene], were submitted to photodegradation by exposure to white light under atmospheric conditions in order to verify if the type of side chain (linear or branched) had an effect on the photodegradation. No significant differences in the photodegradation behaviour between the two polymers were noticed. The following commercial polymers were tested as protective coatings for the PPV derivative cast films: 99 and 80% hydrolysed poly(vinyl alcohol) (PVA) and starch. The best results were achieved using coatings of 99% hydrolysed PVA, which increased about 700 times the time necessary for complete degradation of the PPV derivative films. The results show the effectiveness of this coating in minimizing and, possibly, controlling the effects of the photodegradation of PPV derivative films, which can be useful in many applications, e.g. oxygen sensors. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of novel phenyl‐substituted poly(p‐phenylene vinylene) derivatives

Two novel phenyl‐substituted poly(p‐phenylene vinylene) derivatives, poly{2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐1,4‐phenylenevinylene} (EDP‐PPV) and poly{2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐5‐methoxy‐1,4‐phenylenevinylene} (EDMP‐PPV), and their copolymer, poly{2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐1,4‐phenylene‐vinylene‐co‐2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐5‐methoxy‐1,4‐phenylenevinylene} (EDP‐co‐EDMP‐PPV; 4:1, 1:1, and 1:4), were successfully synthesized according to the Gilch route. The structures and properties of the monomers and the resulting conjugated polymers were characterized with ¹H‐NMR, ¹³C‐NMR, elemental analysis, gel permeation chromatography, thermogravimetric analysis, ultraviolet–visible absorption spectroscopy, and photoluminescence and electroluminescence (EL) spectroscopy. The EL polymers possessed excellent solubility in common solvents and good thermal stability with a 5% weight loss temperature of more than 380°C. The weight‐average molecular weights and polydispersity indices of EDP‐PPV, EDMP‐PPV, and EDP‐co‐EDMP‐PPV were 1.40–2.58 × 10⁵, and 1.19–1.52, respectively. Double‐layer light‐emitting diodes with the configuration of indium tin oxide/polymer/tris(8‐hydroxyquinoline)aluminum/Al devices were fabricated, and EDP‐co‐EDMP‐PPV (1:1) showed the highest EL performance and exhibited a maximum luminance of 1050 cd/m² at 19.5 V. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1259–1266, 2005     

Enhanced surface morphology and transport property of poly(N‐vinylcarbazole)/gold nanocomposite Langmuir–Schaefer films

A composite of poly(N‐vinylcarbazole) (PVK) containing gold nanoparticles (GNPs) was synthesized via simple solid‐state in situ bulk polymerization of N‐vinylcarbazole in the presence of GNPs at a high temperature. Both PVK and PVK–GNP composites were characterized by Fourier transform infrared (FTIR) and UV–vis spectroscopy. The surface morphology of the composites was studied by scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy, and transmission electron microscopy (TEM). Thermal stability was identified via thermogravimetric analysis. The composites were fabricated into films using the Langmuir–Schaefer process. The enhancement in the characteristics of room temperature I–V, pressure–area isotherms, and photoelectrochemical behaviors was observed in the composite films. Results suggest that a charge transfer process occurs across the hybrid at the interface of the PVK–GNP composites. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Poly(9‐vinylcarbazole)/silver composite nanotubes and networks formed at the air–water interface

Silver‐nanoparticle‐doped poly(9‐vinylcarbazole) (PVK) nanocomposites were prepared via the reduction of Ag⁺ ions and the self‐assembly of PVK on AgNO₃ aqueous solution surfaces. The formed composite nanostructures depended strongly on the experimental temperature. Thick round disks of PVK surrounded by discrete Ag nanoparticles and/or with irregular holes formed at room temperature; nanotubes and micronetworks doped with Ag nanoparticles formed at about 30–40°C, and networks formed at higher temperature. Further investigation revealed that the nanotubes were transformed from thin round disks. The length of the PVK/Ag composite nanotubes were longer than 10 μm, and the average size of the embedded Ag nanoparticles was found to be about 3.5 nm. The composite networks were composed of round pores with diameters of several hundred nanometers and fine silver nanoparticles embedded in the thin polymer films that covered the pores. The formation of the nanotubes was a very interesting self‐assembly phenomenon of the polymer at the air–water interface that has not been reported before. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Branched poly(p‐phenylenevinylene): Synthesis,optical and electrochemical properties

A series of poly(p‐phenylene vinylene) (PPV) derivatives with phenylene vinylene side chains (branched PPVs), PPV0, PPV1, PPV2, and PPV3, were synthesized by the Heck coupling reaction and characterized by TGA, absorption spectra, photoluminescence (PL) spectra, and electrochemical cyclic voltammetry. The branched PPVs showed two absorption peaks in the UV–vis region, corresponding to the conjugated side chains (UV absorption) and the main chains (the visible absorption). Especially the absorption spectrum of PPV3 covers a broad wavelength range from 300 to 500 nm. Introducing the electron‐donating alkoxy substituents on the PPV main chains and increasing the content of the alkoxy groups lead to bathochromic shift of both absorption and PL spectra from PPV1 to PPV2 to PPV3. The onset oxidation potential of the branched PPVs is lower by 0.1–0.2 V than that of PPV, indicating that the electron‐donating ability of the branched PPVs enhanced in comparison with that of PPV. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

New light‐emitting poly{(9,9‐di‐n‐octylfluorenediyl vinylene)‐alt‐[1,5‐(2,6‐dioctyloxy)naphthalene vinylene]}

A new conjugated light‐emitting AB copolymer containing alternating fluorene and naphthalene units, poly{(9,9‐di‐n‐octylfluorenediyl vinylene)‐alt‐[1,5‐(2,6‐dioctyloxy)naphthalene vinylene]} (PFV‐alt‐PNV), was synthesized via Horner‐Emmons polymerization. The polymer is completely soluble in common organic solvents and exhibits good thermal stability up to 400 °C. UV‐visible, fluorescence and photoluminescence measurements of the copolymer show peak maxima at 427, 500 and 526 nm, respectively. A light‐emitting device containing the new polymer was fabricated using a simple indium tin oxide configuration: (ITO)/PEDOT:PSS/PFV‐alt‐PNV/Al. Measurements of current versus electric field were carried out, with an onset of light emission occurring at 2.5 V. The electroluminescence brightness was observed to reach a maximum of 5000 cd m^?2. Copyright © 2011 Society of Chemical Industry