CO_2/环氧丙烷共聚合成聚碳酸亚丙酯多元醇

利用双金属氰化物作为催化剂,催化CO2/环氧丙烷调节共聚制备聚碳酸亚丙酯多元醇(PPC),详细考察了催化剂用量、相对分子质量调节剂及其用量、CO2用量等对聚合的影响.研究发现PPC的相对分子质量与相对分子质量调节剂的用量成线性关系,可以根据需要合成具有规定相对分子质量的PPC树脂.最后提出聚合过程中碳酸丙烯酯可能按照解拉链的方式生成.     

Phase behavior of aqueous systems containing block copolymers of poly(ethylene oxide) and poly(propylene oxide)

Phase behavior of aqueous systems containing block copolymers of poly(ethylene oxide (PEO) and poly(propylene oxide) (PPO) was evaluated by building up temperature-concentration phase diagrams. We have studied bifunctional triblock copolymers (HO-PEO-PPO-PEO-OH) and monofunctional diblock copolymers (R-PEO-PPO-OH and R-PPO-PEO-OH, where R length is linear C₄ and C_12–14). The cloud points of the polymer solutions depended on EO/PO ratio, polarity, R length and position of the hydrophilic and hydrophobic segments along the molecule. Such factors influence on the solutions behavior was also analyzed in terms of critical micelle concentration (CMC), which was obtained from surface tension vs. concentration plots. Salts (NaCl and KCl) added into the polymer solutions change the solvent polarity decreasing the cloud points. On the other hand, the cloud points of the polymer solutions increased as a hydrotrope (sodium p-toluenesulfonate) was added. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 1767–1772, 1997     

Synthesis and properties of hydrophilic segmented block copolymers based on poly(ethylene oxide)‐ran‐poly(propylene oxide)

The present article discusses the synthesis and various properties of segmented block copolymers with random copolymer segments of poly(ethylene oxide) and poly(propylene oxide) (PEO‐r‐PPO) together with monodisperse amide segments. The PEO‐r‐PPO contained 25 wt % PPO units and the segment presented a molecular weight of 2500 g/mol. The synthesized copolymers were analyzed by differential scanning calorimetry, Fourier transform infra‐red spectroscopy, atomic force microscopy and dynamic mechanical thermal analysis. In addition, the hydrophilicity and the contact angles (CAs) were studied. The PEO‐r‐PPO segments displayed a single low glass transition temperature, as well as a low PEO crystallinity and melting temperature, which gave enhanced low‐temperature properties of the copolymer. The water absorption values remained high. In comparison to mixtures of PEO/PPO segments, the random dispersion of PPO units in the PEO segments was more effective in reducing the PEO crystallinity and melting temperature, without affecting the hydrophilicity. Increasing the polyether segment length with terephthalic groups from 2500 to 10,000 g/mol increased the hydrophilicity and the room temperature elasticity. Furthermore, the CAs were found to be low 22–39° and changed with the crosslink density. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci 117:1394–1404, 2010     

Mass spectral characterization of the thermal degradation of poly(propylene oxide) by electrospray and matrix-assisted laser desorption ionization

The thermal degradation of poly(propylene oxide) (PPO), M_n = 2000, can be characterized by electrospray (ESI) and matrix-assisted laser desorption ionization (MALDI). ESI and MALDI spectra of partially degraded PPO provide strong support for the thermal degradation pathway previously suggested by Griffiths et al. and Lemaire et al. Although these pathways differ in detail, it is not possible to distinguish between them from the masses of the resultant degradation species. Gel permeation chromatography data indicate that both mass spectrometric methods emphasize the presence of low-mass material, particularly in the degraded samples. This is attributed to the different sensitivities of the two techniques and some in situ fragmentation during mass spectrometric analysis.     

Effects of epoxy resin on mechanical and thermal characteristics of poly(propylene oxide)/poly(butyl acrylate) networks

We report mechanical and thermal characteristics of a network composed of poly(propylene oxide) (PPG) and poly(butyl acrylate) crosslinked with tolylene diisocyanate. It was found that addition of about 4 wt % of an epoxy resin resulted in a higher mechanical toughness and less discoloration. Furthermore, it was found that the epoxy has a self‐restoration function against thermal degradation of the network. The reaction mechanism between the network and the epoxy was investigated with infrared spectroscopy and ¹³C‐NMR and the effect of the epoxy resin on the thermal stability and physical properties is discussed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1886–1893, 2000     

Investigation on the microstructure and the electric property of poly(propylene)/chlorinated poly(propylene)/poly(aniline) composites

The article presents results of studies on composites made from poly(propylene) (PP) modified with poly(aniline) (PANI) doped with dodecylbenzene sulfonic acid (DBSA) and chlorinated poly(propylene) (CPP). The volume resistivity of PP/CPP/PANI composites was detected, and the results show that the volume resistivity decreases with increasing CPP content, and there exists a minimum volume resistivity. Effects of CPP on the microstructure and crystalline structure of the PP/CPP/PANI composites and the relationship between the effects and the electric property were carefully analyzed by scanning electron microscope (SEM) and wide angle X‐ray diffraction (WAXD). The method that the specimens of SEM are polished is appropriate to investigate the morphology of conducting polymer composites. The obtained results illuminate that the area of conducting parts and insulating parts obtained from the digital analysis of the SEM image is obviously influenced by the CPP content, the parameters of the lamellar‐like structure are immediately related to CPP content and denote the dispersion of PANI‐DBSA, and the percent crystallinity and mean crystal size of PP are directly correlated with the CPP content. The increasing area of conducting parts, the increasement of layer distance, the decreasement of size and layer number of the lamellar‐like structure of PANI‐DBSA, and the increasement of the percent crystallinity and mean crystal size of PP are beneficial to the improvement of the conductive property of PP/CPP/PANI composites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Column fractionation of partially stereoregular poly(propylene oxide)

A column packed with glass beads has been used to fractionate partially stereoregular poly(propylene oxide) (PPO). PPO was first crystallized onto the glass beads from isooctane solution by stepwise lowering the column temperature. Each layer of PPO, which was deposited at different temperature ranges, was extracted by washing the beads with several columns full of isooctane. Thus several fractions differing in both stereoregularity and molecular weight were obtained by progressively increasing the extraction temperature and the solvent residence time in the column. It is concluded that in the procedure described above PPO can be fractionated on the basis of structural and steric regularity. The observed steady increase in the molecular weight of fractions with extraction temperature was interpreted as being due to the fact that the stereoregularity of chains increases with their molecular weight.     

Fractionation of partially stereoregular poly(propylene oxide)

Partially stereoregular poly(propylene oxide) samples were synthesized via reactions catalysed by a preformed analytically defined trimethylaluminium hydrolysate. These samples were fractionated into two contrastingly different fractions.

1. (i) D-polymers: This fraction constituted the major part (up to 90%). It mainly contained cyclic low molecular weight oligomers (MW < 1000). The linear chains found in D-polymers had hydroxyl end groups. No double bonds could be detected spectroscopically.

2. (ii) K-polymers: This fraction was high molecular weight stereoregular polymer. Stepwise thermal precipitation from dilute isooctane solution of K-polymers yielded a succession of fractions which differed in melting point. It appears that the phase equilibria during the thermal precipitations were not controlled by the molecular weights of species.

Synthesis and characterization of copolymers with the same proportions of polystyrene and poly(ethylene oxide) compositions but different connection sequence by the efficient Williamson reaction

The AB type diblock PS‐b‐PEO and ABA type triblock PS‐b‐PEO‐b‐PS copolymers containing the same proportions of polystyrene (PS) and poly(ethylene oxide) (PEO) but different connection sequence were synthesized and investigated. Using the sequential living anionic polymerization and ring‐opening polymerization mechanisms, diblock PS‐b‐PEO copolymers with one hydroxyl group at the PEO end were obtained. Then, using the classic and efficient Williamson reaction (realized in a ‘click’ style), triblock PS‐b‐PEO‐b‐PS copolymers were achieved by a coupling reaction between hydroxyl groups at the PEO end of PS‐b‐PEO. The PS‐b‐PEO and PS‐b‐PEO‐b‐PS copolymers were well characterized by ¹H NMR spectra and SEC measurements. The critical micelle concentration (CMC) and thermal behaviors were also investigated by steady‐state fluorescence spectra and DSC, respectively. The results showed that, because the PEO segment in triblock PS‐b‐PEO‐b‐PS was more restricted than that in diblock PS‐b‐PEO copolymer, the former PS‐b‐PEO‐b‐PS copolymer always gave higher CMC values and lower crystallization temperature (T_c), melting temperature (T_m) and degree of crystallinity (X_c) parameters. © 2015 Society of Chemical Industry     

Effect of water on relaxations in the glassy and liquid states of poly(propylene oxide) of molecular weight 4000

The complex relative permittivity of poly(propylene oxide) (PPO) of molecular weight 4000 containing 1.23 wt% water has been measured in the temperature range 77 to 325 K and frequency range 12 Hz to 500 kHz, and the results are compared with the corresponding study of pure PPO-4000. On the addition of water, all the three processes, namely the β-process (at T < T_g) and the - and ′-processes (at T > T_g), are shifted to higher temperatures. The strength of the β-process remained unchanged but that of the and ′-processes increased. The halfwidths of the three processes remained unchanged on dilution with water. The decrease in the relaxation rate of the β-process is suggested to be due to hydrogen bonding of the ---CH(CH₃)---O---CH₂--- group with water molecules. Water antiplasticizes PPO-4000 and this is interpreted as due to the increased chain length when the chain ends become linked via hydrogen bonds. The static permittivity is increased by 30% on addition of 1.23 wt% water.     

Polyethers for biomedical applications: Bulk and surface characterisation of crosslinked blends of poly(ethylene oxide) and poly(propylene oxide)

Bulk and surface properties of crosslinked and non-crosslinked blends of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPOX) were studied for the elucidation of the behaviour of these materials in contact with blood. In the crosslinked blends the hydrophilic character increased with increasing PEO content, as concluded from swelling experiments and contact angle determinations. D.s.c. and dynamic mechanical measurements indicated the occurrence of phase separation in the blends and d.s.c. showed that on equilibration with water the PEO phase loses its crystallinity. F.t.-i.r.-a.t.r. analysis of the surface of crosslinked PPOX-PEO films showed an enrichment of the surface with PEO. These observations indicate that the good blood-compatibility of PPOX-PEO blends might be explained by the presence of an amorphous, PEO-enriched, hydrophilic surface.     

Synthesis and characterization of novel grafted amphoteric poly(propylene) fabrics

Novel grafted amphoteric poly(propylene) (PP) fabrics were prepared by γ‐irradiation, which induced grafting of methacrylic acid (MA) onto PP fabric. A subsequent reaction of PP–MA grafted chains with freshly prepared (3‐chloro‐2‐hydroxylpropyl)amine or diamine chloride compounds followed by purification yielded the corresponding amphoteric PP fabrics. The latter were characterized by elemental microanalysis for the determination of the percentage nitrogen. Fourier transform infrared and scanning electron microscopy were performed on methacrylic and amphoteric PP fabrics. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2504–2510, 2003     

Synthesis and characterization of poly(dihalophenylene oxide)s by solid-state thermal-decomposition of manganese phenolate complexes with tetramethylethylenediamine

The characterization of poly(dihalophenylene oxide)s synthesized by solid-state thermal decomposition of manganese phenolate complexes with tetramethylethylenediamine (TMEN) ligand is reported. The complexes prepared with 2,4,6-trichlorophenol (TCP) and 2,4,6-tribromophenol (TBP) have been characterized by FTIR spectroscopy, elemental analysis, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The dependence of the polymerization yield on temperature and decomposition time of the complexes has been investigated. Maximum polymerization yield is obtained at 220°C and 48 h. The polymers synthesized from the complexes have been characterized by ¹H-NMR and FTIR spectroscopy, DSC, and viscometric measurements. All polymers have a branched structure, a high T_g and low intrinsic viscosity. © 1999 Society of Chemical Industry     

Synthesis,characterization and properties of biodegradable poly(butylene succinate)‐block‐poly(propylene glycol) segmented copolyesters

BACKGROUND: To obtain a biodegradable thermoplastic elastomer, a series of poly(ester‐ether)s based on poly(butylene succinate) (PBS) and poly(propylene glycol) (PPG), with various mass fractions and molecular weights of PPG, were synthesized through melt polycondensation. RESULTS: The copolyesters were characterized using ¹H NMR, gel permeation chromatography, differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis, mechanical testing and enzymatic degradation. The results indicated that poly(ester‐ether)s with high molecular weights were successfully synthesized. The composition of the copolyesters agreed very well with the feed ratio. With increasing content of the soft PPG segment, the glass transition temperature decreased gradually while the melting temperature, the crystallization temperature and the relative degree of crystallinity decreased. Mechanical testing demonstrated that the toughness of PBS was improved significantly. The elongation at break of the copolyesters was 2–5 times that of the original PBS. Most of the poly(ester‐ether) specimens were so flexible that they were not broken in Izod impact experiments. At the same time, the enzymatic degradation rate of PBS was enhanced. Also, the difference in molecular weight of PPG led to properties being changed to some extent among the copolyesters. CONCLUSION: The synthesized poly(ester‐ether)s having excellent flexibility and biodegradability extend the application of PBS into the areas where biodegradable thermoplastic elastomers are needed. Copyright © 2009 Society of Chemical Industry     

Structure-property behavior of poly(dimethylsiloxane) based segmented polyurea copolymers modified with poly(propylene oxide)

Poly(propylene oxide) (PPO) was incorporated in a controlled manner between poly(dimethylsiloxane) (PDMS) and urea segments in segmented polyurea copolymers and their solid state structure-property behavior was investigated. The copolymers contained PDMS segments of MW 3200 or 7000 g/mol and an overall hard segment content of 10-35 wt%. PPO segments of MW 450 or 2000 g/mol were utilized. Equivalent polyurea copolymers based on only PDMS as the soft segment (SS) component were used as controls. The materials (with or without PPO) utilized in this study were able to develop microphase morphology as determined from dynamic mechanical analysis (DMA) and small angle X-ray scattering (SAXS). DMA and SAXS results suggested that the ability of the PPO segments to hydrogen bond with the urea segments results in a limited inter-segmental mixing which leads to the formation of a gradient interphase, especially in the PPO-2000 co-SS containing copolymers. DMA also demonstrated that the polyureas based on only PDMS as the SS possessed remarkably broad and nearly temperature insensitive rubbery plateaus that extended up to ca. 175 °C, the upper temperature limit depending upon the PDMS MW. However, the incorporation of PPO resulted in more temperature sensitive rubbery plateaus. A distinct improvement in the Young's modulus, tensile strength, and elongation at break in the PPO-2000 and PDMS-7000 containing copolymers was observed due to inter-segmental hydrogen bonding and the formation of a gradient interphase. However, when PPO was incorporated as the co-SS, the extent of stress relaxation and mechanical hysteresis of the copolymers increased relative to the segmented polyureas based on the utilization of only PDMS as the soft segment component.     

Epoxy resins toughened by poly(propylene carbonate)

Poly(propylene carbonate) (PPC) was used as a toughening agent for improving the brittleness of cured epoxy resins (EP). Methyl tetrahydrophthatic anhydride (MTHPA) was used as a curing agent. The activation energies for the reactions of PPC/MTHPA and EP/MTHPA measured by FTIR were 115.8 and 66.5 kJ/mol, respectively, while for the composite system of PPC/EP/MTHPA, the activation energy obtained from DSC was 52.9 kJ/mol. Gel contents, DMA, and DSC displayed that the cured resins of PPC/EP/MTHPA were phase-separation crosslinking systems and most of PPC could react with MTHPA or the epoxy group. The toughness of cured resins was reinforced by the addition of PPC. The optimum mechanical properties and toughness for cured resins of PPC/EP/MTHPA corresponded to the system containing 20 phr PPC, which achieved a 33% increase in tensile strength and a 45% increase in the fracture toughness at no expense of the elongation of cured resins. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 2457–2465, 1997     

A glow discharge treatment to immobilize poly(ethylene oxide)/poly(propylene oxide) surfactants for wettable and non-fouling biomaterials

A non-fouling (protein resistant) polymer surface was achieved using an argon glow discharge treatment of a polyethylene surface which had been precoated with various poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) (PEO-PPO-PEO) tri-block copolymer surfactants. The surfactant is first deposited on the polymer surface via a solvent swelling and evaporation method. Then the coated surfactant is immobilized on the substrate surface by an inert gas discharge treatment. ESCA and water contact angle () measurements on treated and solvent washed surfaces show significant increases in both surface O/C ratios and surface water wettability (0 < 30°) compared to LDPE control surfaces, revealing the presence of PEO on the treated surfaces. A great reduction of fibrinogen adsorption on the modified surfaces is also observed for the highest PEO content surfactants. This simple surface modification process may have wide applicability to obtain wettable polymer surfaces in general, and non-fouling biomaterial surfaces in specific.     

Synthesis and characterization of poly(methylphenylsilylene)–poly(ethylene oxide) and poly(methylphenylsilylene)–polyisoprene multiblock copolymers

Multiblock copolymers were synthesized through condensation reactions of end‐groups of α,ω‐dichloro‐poly(methylphenylsilylene) with hydroxyl end‐groups of poly(ethylene glycol) or the chain‐ends of ‘living’ polyisoprenyl disodium. Optimum conditions have been sought through kinetic studies and by investigation of model reactions. The overall molecular weight distribution of poly(methylphenylsilylene)‐block‐poly(ethylene oxide) is characterized in terms of Flory's theory of condensation reactions, while the limiting step in the reaction is tentatively attributed to the formation of aggregates. © 2001 Society of Chemical Industry     

High molecular weight poly( -lactide) and poly(ethylene oxide) blends: thermal characterization and physical properties

The miscibility of high molecular weight poly( -lactide) PLLA with high molecular weight poly(ethylene oxide) PEO was studied by differential scanning calorimetry. All blends containing up to 50 weight% PEO showed single glass transition temperatures. The PLLA and PEO melting temperatures were found to decrease on blending, the equilibrium melting points of PLLA in these blends decreased with increasing PEO fractions. These results suggest the miscibility of PLLA and PEO in the amorphous phase. Mechanical properties of blends with up to 20 weight% PEO were also studied. Changes in mechanical properties were small in blends with less than 10 weight% PEO. At higher PEO concentrations the materials became very flexible, an elongation at break of more than 500% was observed for a blend with 20 weight% PEO. Hydrolytic degradation up to 30 days of the blends showed only a small variation in tensile strength at PEO concentrations less than 15 weight%. As a result of the increased hydrophilicity, however, the blends swelled. Mass loss upon degradation was attributed to partial dissolution of the PEO fraction and to an increased rate of degradation of the PLLA fraction. Significant differences in degradation behaviour between PLLA/PEO blends and (PLLA/PEO/PLLA) triblock-copolymers were observed.     

Synthesis of graft copolymer polyethylene‐ graft‐poly(ethylene oxide) by a new anionic graft‐from polymerization

A series of amphiphilic graft copolymers, PE‐graft‐PEO, containing hydrophobic polyethylene (PE) as the backbone and hydrophilic poly(ethylene oxide) (PEO) as the side‐chain, have been synthesized by a novel route. The graft structure and the molecular weight, as well as the molecular weight distribution of the graft copolymer can easily be controlled. The molecular weight of the side‐chain PEO is proportional to the reaction time and the monomer concentration, which indicates the ‘living’ character of the anionic polymerization of ethylene oxide. The produced copolymers PE‐graft‐PEO were characterized by ¹H NMR and DSC measurements. Copyright © 2004 Society of Chemical Industry