Thermal behavior of some homogeneously polymethyl methacrylate (PMMA)‐grafted high α‐cellulose products

The graft copolymerization of methyl methacrylate (MMA) onto high α‐cellulose was carried out homogeneously in an N,N‐dimethyl acetamide/lithium chloride solvent system by using benzoyl peroxide as radical initiator. The rate of grafting was evaluated as a function of concentrations of initiator and monomer, reaction time, and temperature. The grafted products were characterized with the help of infrared spectroscopy, whereas the thermal decomposition of optimum PMMA‐grafted high α‐cellulose was studied using TGA, DTG, and DTA techniques at two heating rates, 10 and 20°C/min, in nitrogen atmosphere in the range of room temperature to 650°C. Three major decomposition steps were identified and the relative thermal stabilities of the PMMA‐grafted high α‐cellulose products were assessed. The kinetic parameters for the three decomposition steps were estimated with the help of two well‐known methods. The thermal stability of the grafted products decreased with the increase of graft yield (GY). Crystallinity or peak intensity of wide‐angle X‐ray diffraction patterns decreased with the increase of GY. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3471–3478, 2004     

Study of heavy metal ion absorbance by amidoxime group introduced to cellulose‐graft‐polyacrylonitrile

Amidoximated grafted cellulose was obtained by reacting hydroxylamine and cellulose‐graft‐polyacrylonitrile (C‐g‐PAN), prepared by KMnO₄/citric acid redox system, and the resultant amidoximated grafted cellulose was characterized by scanning electron microscope (SEM), solid‐state NMR, FTIR, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and elemental analysis. The highest value of amidoxime content in the grafted sample was 2.42 mmol/g. The adsorption efficiencies of amidoximated grafted cellulose have been evaluated with studying different adsorption conditions. Amidoximated sample with amidoxime content 2.42 mmol/g showed high ability to adsorb the metal ions from the aqueous solutions as high as 1.7 mmol/g, 1.6 mmol/g, and 0.84 mmol/g for Co²⁺, Cu²⁺, Ni²⁺ ions, respectively, at the highest original metal ion concentration. These values are about three times larger than previous studies. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of soluble and thermally stable polyamides from diamine containing (quinolin‐8‐yloxy) aniline pendant group

A novel diamine monomer having pendant 4‐(quinolin‐8‐yloxy) aniline group was successfully synthesized via aromatic substitution reaction of 8‐quinolinol with p‐fluoronitrobenzene followed by Pd/C catalyzed hydrazine reduction, amidation reaction between 4‐(quinolin‐8‐yloxy) aniline and 3,5‐dinitrobenzoylcholoride followed by Pd/C catalyzed hydrazine reduction. The diamine monomer was fully characterized by using FTIR, ¹H‐NMR, ¹³C‐NMR, and elemental analysis. The diamine monomer was polymerized with various aromatic and aliphatic dicarboxylic acids to obtain the corresponding polyamides. The polyamides had inherent viscosity in the range of 0.30–0.41 dL/g and exhibited excellent solubility in the polar aprotic solvents such as DMAc, NMP, N,N‐dimethylformamide, Pyridine, and DMSO. The glass transition temperatures (T_g) of the polymers are high (up to 313°C) and the decomposition temperatures (T_i) range between 200 and 370°C, depending on the diacids residue in the polymers backbone. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Novel regenerable N‐halamine polymeric biocides. II. Grafting hydantoin‐containing monomers onto cotton cellulose

A novel cyclic‐amine monomer, 3‐allyl‐5,5‐dimethylhydantoin (ADMH) was synthesized with good yield by the reaction of allyl bromide with 5,5‐dimethylhydantoin (DMH), and was characterized by FTIR and ¹H‐NMR spectra. ADMH alone cannot be grafted onto other polymers. However, the presence of acrylonitrile markedly enhanced the ADMH graft yield onto cotton cellulose. The influence of reaction conditions on the graft copolymerization was investigated. After chlorine bleach treatment, hydantoin units in the grafted copolymers were easily transformed into N‐halamine structures. Grafted samples exhibited potent antibacterial activity against Escherichia coli, and the functional properties were shown to be durable and regenerable. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 617–624, 2001     

Grafting of poly(3‐hydroxyalkanoate) and linoleic acid onto chitosan

Poly(3‐hydroxy octanoate) (PHO), poly(3‐hydroxy butyrate‐co‐3‐hydroxyvalerate) (PHBV), and linoleic acid were grafted onto chitosan via condensation reactions between carboxylic acids and amine groups. Unreacted PHAs and linoleic acid were eliminated via chloroform extraction and for elimination of unreacted chitosan were used 2 wt % of HOAc solution. The pure chitosan graft copolymers were isolated and then characterized by FTIR, ¹³C‐NMR (in solid state), DSC, and TGA. Microbial polyester percentage grafted onto chitosan backbone was varying from 7 to 52 wt % as a function of molecular weight of PHAs, namely as a function of steric effect. Solubility tests were also performed. Graft copolymers were soluble, partially soluble or insoluble in 2 wt % of HOAc depending on the amount of free primary amine groups on chitosan backbone or degree of grafting percent. Thermal analysis of PHO‐g‐Chitosan graft copolymers indicated that the plastizer effect of PHO by means that they showed melting transitions T_ms at 80, 100, and 113°C or a broad T_ms between 60.5–124.5°C and 75–125°C while pure chitosan showed a sharp T_m at 123°C. In comparison of the solubility and thermal properties of graft copolymers, linoleic acid derivatives of chitosan were used. Thus, the grafting of poly(3‐hydroxyalkanoate) and linoleic acid onto chitosan decrease the thermal stability of chitosan backbone. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103:81–89, 2007     

Structural characterization of alpha methyl styrene‐butyl acrylate‐grafted polyetheretherketone films

Radiation‐induced graft copolymerization of alpha methyl styrene (AMS)‐butyl acrylate (BA) mixture onto poly(etheretherketone) (PEEK) was carried out to develop films of varying copolymer compositions. The characterization of films was carried out with fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), X‐ray diffraction analysis (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The presence of AMS and BA units within the film matrix was confirmed by FTIR. The intensity of the characteristic peaks for AMS and BA increased with the increasing grafted component in the films. The crystallinity of the films as observed from DSC and XRD decreased with the increasing graft levels. On the other hand, the melting temperature of the base polymer was almost unaffected by irradiation and the grafting process. The glass transition temperature (T_g) of the grafted film increased as compared to the virgin PEEK. Ungrafted film showed a stable thermogram up to ～500°C. However, the grafting introduced a new decomposition range in the copolymer, due to the presence of the AMS/BA. AFM images showed the formation of domains on the grafted PEEK film surface. The SEM also showed domain formation of the grafted component within the PEEK matrix. However, the fracture analysis did not show any prominent phase separation. Mechanical characterization of films in terms of tensile strength, elongation, and modulus was also carried out. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of poly(ether sulfone)‐graft‐polydimethylsiloxane copolymers

Novel poly(arylene ether sulfone) (PAES) polymers containing polydimethylsiloxane (PDMS) side chains were synthesized and characterized with NMR and Fourier transform infrared spectroscopy. The thermal properties of the copolymers were evaluated with differential scanning calorimetry and thermogravimetric analysis. The polymers showed perfect thermal stability, as the decomposition temperatures were all above 380°C, and exhibited glass‐transition temperatures in the range 130–188°C. Furthermore, the surface properties of the copolymers were evaluated by X‐ray photoelectron spectroscopy and contact angle analysis. The results show that the hydrophobic abilities of the graft copolymer surfaces were improved significantly compared to PAES through the introduction of the PDMS chains. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of aromatic/cycloaliphatic poly(amide‐ imide‐imide)s from bis(4‐amino‐ 3,5‐dimethylphenyl) cycloalkane derivatives

A series of novel aromatic diamines containing cycloaliphatic moieties was synthesized by the reaction of cycloalkanones like cyclohexanone and cycloheptanone with 2,6‐dimethylaniline. The tetrimide diacid was synthesized using the prepared diamine with 3,3′,4,4′‐benzophenonetetracarboxylic acid dianhydride/pyromellitic dianhydride and p‐aminobenzoic acid. The polymers were prepared by treating the tetrimide diacid with different aromatic diamines. The structures of the monomers and polymers were identified using elemental analysis and Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopy. The polymers show excellent solubility. The polymers are amorphous and have high optical transparency. They also show good thermal stability and their T_g value is found to be in the range 268–305 °C. Copyright © 2007 Society of Chemical Industry     

Starch‐grafted polypropylene: Synthesis and characterization

Graft copolymerization of starch has been carried out onto preirradiated polypropylene (PP) in an aqueous medium using benzoyl peroxide (BPO) as the radical initiator. The maximum percentage of grafting (115%) of starch onto PP was obtained at optimum conditions of BPO concentration, 1.239 × 10⁻³ moles; temperature, 65°C; in 120 min. using 30 mL of water. Swelling studies were carried out in pure, binary, ternary and quaternary solvent systems comprising of water, ethanol (EtOH), dimethylsulphoxide (DMSO), and N,N‐dimethylformamide (DMF) in different ratios. Maximum swelling is observed in DMSO and DMF, followed by EtOH and least in water for true graft. Water retention studies of pristine PP and PP‐g‐Starch (both composite and true graft) were investigated at different time periods, temperature and pH. The composite contains grafted PP, unreacted starch and unreacted PP whereas true graft is the product from which both unreacted polymers have been removed. Maximum % water retention of PP‐g‐Starch (composite) (110%) was observed in 8 h at 50°C in neutral medium (pH = 7). The graft copolymers were characterized by FTIR, DTG, DTA, TGA, and SEM. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

A simple one‐step synthesis and polymerization of plant oil triglyceride iodo isocyanates

In this study, a novel and simple route for the synthesis of the iodine isocyanate (INCO) adduct of soybean oil triglycerides is described. Soybean oil iodo isocyanate (ISONCO) was synthesized by the reaction of iodine isocyanate and soybean oil at room temperature. ISONCO was then polymerized with polyols, such as, castor oil, pentamethylene glycol, and glycerol to give the corresponding polyurethanes and with polyamines, such as, ethylene diamine, hexamethylene diamine, and triethylene tetramine to give corresponding polyureas. The structures of the monomer and the polymers were determined by FTIR and ¹H‐NMR analyses. Thermal properties of the polymers were determined by DSC and TGA. Thermal degradation of the polyurethanes started at 150°C. Stability of the polyureas was higher than polyurethanes. Almost all polymers showed a T_g around ?50°C. The mechanical properties of the polymers were determined by tensile tests. Among the polymers synthesized, castor oil polyurethane showed the highest elongation at break and the lowest tensile strength of 140 KPa. The highest tensile strength of 900 KPa was observed in the pentamethylene glycol polyurethanes. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

High‐performance biobased epoxy derived from rosin

Great achievements have been made in the research of biobased thermoplastic polymers, but the progress concerning thermosetting resins has been minor. In particular, research on high‐performance thermosetting polymers from renewable feedstock has not been reported elsewhere. A novel biobased epoxy was synthesized from a rosin acid. Its chemical structure was confirmed using ¹H NMR, ¹³C NMR and Fourier transform infrared spectroscopy. The results indicated that the rosin‐based epoxy possessed high glass transition temperature (T_g = 153.8 °C), high storage modulus at room temperature (G′ = 2.4 GPa) and good thermal stability. A rosin‐based epoxy with excellent properties was achieved. The results suggest it is possible to develop high‐performance thermosetting resins from renewable resources. Copyright © 2010 Society of Chemical Industry     

Solvothermal process for grafting dibutylmaleate onto poly(ethylene‐co‐1‐octene)

Solvothermal process was successfully developed to graft dibutylmaleate (DBM) onto poly(ethylene‐co‐1‐octene) (POE) with dicumyl peroxide (DCP) as free radical‐initiator. FTIR spectra demonstrate that DBM is successfully grafted onto the backbone of POE by this novel method. The influences of DBM content, DCP concentration, POE concentration, reaction temperature and reaction time on the grafting copolymerization have been investigated in detail through grafting degree (GD). It is worthy to indicate that high grafting degree (above 15%) can be achieved through the one‐pot way when the graft reaction is carried out in 40 mL toluene at 150°C for 5 h with 1.6 g DBM, 6–8 g POE and 0.35 g DCP. This developed solvothermal process is becoming an effective way to prepare POE‐g‐DBM graft copolymers, and can be extended to other systems. In addition, TGA results show that the thermal properties of POE are enhanced after the grafting reaction. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,curing behavior and thermal properties of silicon‐containing hybrid polymers with Si−C≡C units

Three novel kinds of linear silicon‐containing hybrid polymers with Si?C≡C units were synthesized by polycondensation reactions using the Grignard reagent method. All the polymers were thermosetting, highly heat‐resistant, moldable and easily soluble in common organic solvents. The structure, curing behavior, thermal and oxidative properties were characterized using Fourier transform infrared spectroscopy, ¹H NMR, ¹³C NMR, gel permeation chromatography, differential scanning calorimetry and thermogravimetric analysis. The results obtained can provide theoretical guidance for determining the curing of the resin system. In addition, the cured polymers exhibit excellent thermal and oxidative stabilities with temperatures of 5% weight loss (T_d5) above 480 °C and 450 °C in nitrogen and air respectively; the residues at 1000 °C were above 70.0% and 45.0% respectively. The thermal and oxidative stabilities of the polymers are attributed to a crosslinking reaction between the Si?H and C≡C bonds or C≡C bonds. These polymers have the potential for use as high‐temperature‐resistant resins and ceramic precursors. © 2013 Society of Chemical Industry     

Adsorption of VO2+ by poly[(tetrafluoroethylene)‐co‐(perfluorovinyl ether)] copolymer grafted with acrylic acid using γ‐irradiation

Grafted films were prepared by the reaction of acrylic acid (AAc) onto poly[(tetrafluoroethylene)‐co‐(perfluorovinyl ether)] copolymer (PFA) using γ‐irradiation by the mutual technique. The grafted copolymer was complexed with the vanadyl group, VO²⁺, in aqueous solution. The grafted copolymer–metal complexes were examined by infrared and ultraviolet spectrometry, energy‐dispersive spectroscopy (EDS) and X‐ray diffraction (XRD). The amount of vanadium in the grafted films was estimated using EDS. The thermal stability of the films was investigated through thermogravimetric and differential scanning calorimetry measurements. The degree of crystallinity of the grafted and complexed films decreased by treatment with VO²⁺ ions and also by heating at 300 °C. When heated at a temperature above 300 °C, the grafted chains degraded till they disappeared and the original polymer was almost completely separated. XRD investigation revealed that the metal oxide may be formed as a separate phase with subsequent decrease in the crystallinity of the copolymer. Furthermore, scanning electron microscope (SEM) investigation of the grafted and modified films, both unheated and heated (300 °C), showed changes in the structure and morphology. The tendency of the graft copolymer to adsorb and/or bind to VO²⁺ from aqueous solution is of promising use in the field of waste treatment of rare metals in the environment. Copyright © 2004 Society of Chemical Industry     

Study of the effect of natural rubber‐graft‐o‐aminophenol on the thermal stability and mechanical properties of nitrile rubber

The grafting copolymerization of natural rubber and o‐aminophenol was carried out by using two‐roll mill machine. The prepared grafted antioxidant, NR‐graft‐o‐AP, analyzed by using Infrared and ¹H‐NMR Spectroscopy techniques. The thermal stability, mechanical properties, and ultrasonic attenuation coefficient were evaluated for NBR vulcanizates containing the commercial antioxidant, PBN, and the prepared grafted antioxidant, NR‐graft‐o‐AP, and the control vulcanizate. Results of the thermal stability indicate that the prepared NR‐graft‐o‐AP can protect NBR vulcanizate against thermal treatment much better than the commercial antioxidant, PBN, and control mix, respectively. The prepared grafted antioxidant improves the mechanical properties of NBR vulcanizate. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Carrier‐free dyeing of radiation‐grafted polyester fabrics with disperse dyes

Carrier‐free dyeing of radiation‐grafted polyester fabrics with disperse red dye was studied in the temperature range 283–363 K. 1‐vinyl 2‐pyrrolidone (NVP), acrylic acid (AA) or their mixture was used to graft poly(ethylene terephthalate) (PET) fabric. The effects of pH of the dye solution, graft yield (GY), dyeing time (t), dye concentration (C), and dyeing temperature (T) on the colour difference (CD) of PET fabric were studied. The best dyeing condition was achieved at pH 5.5. CD increases linearly with the increase in GY, with slopes depending on the type of grafted copolymer. CD increased rapidly as the dyeing time increased; this was followed by a relatively slow dyeing rate within a few minutes. The initial dyeing rate (R) was found to increase with an increase in C and T. The dyeing rates for all grafted samples followed 0.35‐order kinetics and are temperature‐independent. Average activation energy 9.26 kJ mol^?1 is calculated for the dyeing process and is independent of the fabric treatment. Pre‐exponential rate constants 1976, 1839, and 1579 (CD/GY) s^?1 were calculated for dyeing PET samples grafted with AA/NVP mixture, NVP and AA, respectively, while 1074 CD s^?1 was evaluated for carrier dyeing of ungrafted fabric. Analysis of the kinetic parameters and the dyeing mechanism revealed that dyeing PET fabric was diffusion‐controlled. Grafting PET fabric improved significantly the dyeing affinity of the DR dye over ungrafted samples dyed in solutions containing a carrier. Copyright © 2005 Society of Chemical Industry     

Thermal stability and decomposition mechanism of poly(p‐acryloyloxybenzoic acid and poly (p‐methacryloyloxybenzoic acid) and their graft copolymers with polypropylene,Part II

Thermal stability and decomposition mechanism of poly(p‐acryloyloxybenzoic) acid (PABA), p‐methacryloyloxybenzoic acid (PMBA), and their graft coproducts of PP were studied by differential scanning calorimetry, direct pyrolysis mass spectrometry, and TG/IR system, combined thermogravimetric analyzer, and FTIR spectrometer. The homopolymers and corresponding grafts were found to be stable in nitrogen atmosphere but started to decompose under atmospheric conditions when heated above 230°C. PABA and PAPA‐g‐PP showed a better thermal stability compared to the other polymer. The degradation proceeded predominantly by decomposition of side groups giving phenol, benzoic acid, hydroxybenzoic acid, carboxylic and carbonyl groups, and by decomposition of phenol into cyclodiene mainly. It was also seen that the degradation path did not greatly changed whether the PABA or PMBA were homopolymers or grafted onto PP but the induction temperature of grafted polymers was seen at some 10–20°C higher. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Ring‐opening graft polymerization of L‐lactide onto starch granules in an ionic liquid

A room temperature ionic liquid 1‐allyl‐3‐methylimidazolium chloride ([AMIM]Cl) was a promising direct solvent for starch and nonderivitizing solvent for starch‐effective dissolution, in which the ring‐opening graft polymerization (ROGP) of L ‐lactide (L ‐LA) onto starch chains was carried out homogeneously. The obtained starch grafted poly(L ‐lactide) (starch‐g‐PLLA) was characterized by FTIR, ¹³C NMR, DSC, and WAXD, and the good adhesion between the two components was evidenced by SEM observations although the chains of grafted PLLA were not long. The grafting efficiency of PLLA reached 30% when the ROGP proceeded at 100°C for 10 h with L ‐LA/starch 0.5 : 1 (wt/wt) and stannous octoate (Sn(Oct)₂) as a catalyst, which was calculated according to a standard curve newly created by FTIR method. The homopolymerization of L ‐LA and the disconnection of grafted PLLA from starch‐g‐PLLA were the main competition reactions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermal decomposition of cellulose/synthetic polymer blends containing grafted products. II. Cellulose/polyacrylonitrile blends

The homogeneous grafting of acrylonitrile onto cellulose was carried out in a dimethyl sulfoxide/paraformaldehyde solvent system. The grafted products were added to cellulose/polyacrylonitrile (PAN) blends as compatibilizers. The thermal decomposition behavior of the blends was investigated by thermogravimetry. The thermal stability of the blends with higher grafted product content was lower by more than 100°C than that of the blends without grafted product. The accessibility values of the former blends were larger than those of the latter. The microphase-separated structures of the grafted product blends were finer than those without the product. Dynamic mechanical measurements and differential scanning calorimetry were performed to estimate the glass transition temperatures, T_g, of the blends. The variation in T_g was smaller than that in characteristic temperatures determined by thermogravimetry. The difference in thermal decomposition behavior was correlated to that in compatibility. Thermogravimetry was found to be effective for estimating the compatibility in cellulose/PAN blends containing grafted products. © 1996 John Wiley & Sons, Inc.     

Novel poly(amide‐hydrazide)s and copoly(amide‐hydrazide)s from bis‐(4‐aminobenzyl) hydrazide and aromatic diacid chlorides: Synthesis and characterization

A new aromatic diamine, viz., bis‐(4‐aminobenzyl) hydrazide (BABH), which contains preformed hydrazide and methylene linkage, was synthesized starting from α‐tolunitrile. The BABH and intermediates involved in its synthesis were characterized by spectroscopic methods. Novel poly(amide‐hydrazide)s were synthesized by low temperature solution polycondensation of BABH with isophthaloyl chloride (IPC) and terephthaloyl chloride (TPC). Furthermore, two series of copoly(amide‐hydrazide)s, based on different mol % of BABH and bis‐(4‐aminophenyl) ether (ODA) with IPC/TPC were also synthesized. Poly(amide‐hydrazide)s and copoly(amide‐hydrazide)s were characterized by inherent viscosity [η_inh], FTIR, solubility, X‐ray diffraction (XRD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The polycondensation proceeded smoothly and afforded the polymers with inherent viscosities in the range of 0.18–0.93 dL/g in (NMP + 4% LiCl) at 30°C ± 0.1°C. These polymers dissolved in DMAc, NMP or DMSO containing LiCl. The solubility of copolymers was considerably improved in line with less crystalline nature due to random placement of constituent monomers during the copolymerization. XRD data indicated that poly(amide‐hydrazide)s from BABH alone and IPC/TPC had higher crystallinity than the corresponding copoly(amide‐hydrazide)s derived from a mixture of BABH and bis‐(4‐aminophenyl) ether (ODA). Polymers showed initial weight loss around 160°C which is attributed to the cyclodehydration leading to the formation of corresponding poly(amide‐oxadiazole)s. Copolyamide‐hydrazides showed T_max between 400 and 540°C which is essentially the decomposition of poly(amide‐oxadiazole)s. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010