Crystallization behavior of “wet brush” and “dry brush” blends of PS‐b‐PEO‐b‐PS/h‐PEO

The crystallization behavior of the blending system consists of homopolymer poly(ethylene oxide) (h‐PEO) with different molecular weights, and polystyrene‐block‐poly (ethylene oxide)‐block‐polystyrene (PS‐b‐PEO‐b‐PS) triblock copolymer has been investigated by DSC measurements. The crystallization of PEO block (b‐PEO) in block copolymer occurs under much lower temperature than that of the h‐PEO in the bulk (ΔT > 65 °C), which is attributed to the homogeneous nucleation crystallization behavior of the b‐PEO microdomains. In both the “dry‐brush” and the “wet brush” blending systems, the homogeneous nucleation crystallization temperature of PS‐b‐PEO‐b‐PS/h‐PEO blends increases due to the increase of the domain size. The heterogeneous nucleation crystallization temperatures of h‐PEO in the wet brush blending systems are higher than that of the corresponding h‐PEO in the bulk. At the same time, the heterogeneous nucleation crystallization temperature of b‐PEO10000 decreases from 43°C to 30°C and 40°C in the h‐PEO600 and h‐PEO2000 blending systems, respectively, because of the stretching of the PEO chains in the wet brush. However, this kind of phenomenon does not happen in the dry brush blending systems. The self‐seeding procedure was used to further ascertain the nucleation mechanism in the crystallization process. As a result, the self‐seeding domains have been confirmed, and the difference between the dry brush and wet brush systems has been observed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

A facile preparation of pH‐temperature dual stimuli‐responsive supramolecular hydrogel and its controllable drug release

A series of pH‐temperature dual stimuli‐responsive random copolymers poly[N,N‐dimethylaminoethyl methacrylate‐co‐poly(poly(ethylene glycol) methyl ether methacrylate][poly(DMAEMA‐co‐MPEGMA)] were synthesized by free radical polymerization. The supramolecular hydrogel was formed by pseudopolyrotaxane, which was prepared with the host‐guest interactions between α‐cyclodextrin (α‐CD) and poly(ethylene glycol) (PEG) side chains. Fourier transform infrared (FT‐IR), nuclear magnetic resonance (¹H NMR), and X‐ray diffraction (XRD) confirmed the structures of the hydrogels. The pH‐temperature dual stimuli responsive properties of the hydrogels were characterized by rheometer. Finally, the controllable drug release behavior of the hydrogel, which was used 5‐fluorouracil (5‐Fu) as the model drug, was investigated at different temperatures and different pH values. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43279.     

Microwave‐assisted preparation of temperature sensitive poly(N‐isopropylacrylamide) hydrogels in poly(ethylene oxide)‐600

In this article, a series of poly(N‐isopropylacrylamide) (PNIPAM)‐based hydrogels were prepared under microwave irradiation using poly(ethylene oxide)‐600 (PEO‐600) as reaction medium and microwave‐absorbing agent as well as pore‐forming agent. All of the temperature measurements, gel fractions, and FTIR analyses proved that the PNIPAM hydrogels were successfully synthesized. Within 1 min, the PNIPAM hydrogel with a 98% yield was obtained under microwave irradiation. The PNIPAM hydrogels thus prepared exhibited controllable properties such as pore size, equilibrium swelling ratios, and swelling/deswelling rates when changing the feed weight ratios of monomer (N‐isopropylacrylamide, NIPAM) to PEO‐600. These properties are well adapted to the different requirements for their potential application in many fields such as biomedicine. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:4177–4184, 2006     

Preparation and microstructural analysis of poly(ethylene oxide) comb‐type grafted poly(N‐isopropyl acrylamide) hydrogels crosslinked by poly(ϵ‐caprolactone)

Poly(N‐isopropyl acrylamide) (PNIPAAm)‐graft‐poly(ethylene oxide) (PEO) hydrogels crosslinked by poly(?‐caprolactone) diacrylate were prepared, and their microstructures were investigated. The swelling/deswelling kinetics and compression strength were measured. The relationship between the structure and properties of hydrogel are discussed. It was found that the PEO comb‐type grafted structure reduced the thermosensitivity and increased the compression strength. The addition of poly(?‐caprolactone) (PCL) accelerated the deswelling rate of the hydrogels. Meanwhile, the entanglement of PCL chains restrained the further swelling of the network of gels. The PCL crosslinking agent and PEO comb‐type grafted structure made the behavior of the hydrogels deviate from the rubber elasticity equations. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Biocompatible,ionic‐strength‐sensitive,double‐network hydrogel based on chitosan and an oligo(trimethylene carbonate)–poly(ethylene glycol)–oligo(trimethylene carbonate) triblock copolymer

A double‐network (DN) hydrogel was prepared through the sequential photopolymerization of oligo(trimethylene carbonate) (TPT)‐block‐poly(ethylene glycol)‐block‐oligo(trimethylene carbonate) diarylate and methacrylated chitosan (CS–MA). The swelling behavior and mechanical properties of the hydrogels were tunable via the control of the concentration of CS–MA. Under physiological conditions, the fracture stress of the DN hydrogel reached 3.4 MPa; this was more than twice that of the corresponding TPT‐block‐poly(ethylene glycol)‐block‐TPT single network (1.6 MPa). At high ionic strength, the fracture stress of the DN hydrogel reached 6.4 MPa. The DN hydrogel exhibited good cytocompatibility, as revealed by a live–dead assay. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42459.     

Encapsulation of urease in double‐layered hydrogels of macroporous poly(2‐hydroxyethyl methacrylate) core and poly(ethylene oxide) outer layer: fabrication and biosensing properties

Double‐layered hydrogels of super‐macroporous poly(2‐hydroxyethyl methacrylate) (PHEMA) cryogel core and poly(ethylene oxide) (PEO) hydrogel outer layer for encapsulation of the enzyme urease were constructed. The enzyme was entrapped into the pores of PHEMA cryogel by soaking and then the core was covered with a PEO layer. The leaking of urease from the core was prevented when the density of the PEO network was increased by incorporation of the crosslinking agent, poly(ethylene glycol) diacrylate. The hybrid system exhibited a nearly constant enzyme activity with time and maintained its structural integrity after several reactions of hydrolysis of urea. The potential of double‐layered hydrogels containing urease for establishment of water pollution with copper was investigated as well. Copyright © 2011 Society of Chemical Industry     

Graphene Oxide Hybrid Supramolecular Hydrogels with Self‐Healable,Bioadhesive and Stimuli‐Responsive Properties and Drug Delivery Application

Self‐healable hydrogels are promising soft materials with great potential in biomedical applications due to their autonomous self‐repairing capability. Although many attempts are made to develop new hydrogels with good self‐healing performance, to integrate this characteristic along with other responsive multifunctions into one hydrogel still remains difficult. Here, a self‐healable hybrid supramolecular hydrogel (HSH) with tunable bioadhesive and stimuli‐responsive properties is reported. The strategy is imparting graphene oxide (GO) nanosheets and quadruple hydrogen bonding ureido‐pyrimidinone (UPy) moieties into a thermoresponsive poly(N‐isopropylacrylamide) (PNIPAM) polymer matrix. The obtained GO–HSH hydrogel shows rapid self‐healing behavior and good adhesion to various surfaces from synthetic materials to biological tissue. In addition, doxorubicin hydrochloride (DOX) release profiles reveal the dual thermo‐ and pH‐responsiveness of the GO–HSH hydrogel. The DOX‐loaded hydrogel can further directly adhere to titanium substrate, and the released DOX from this thin hydrogel coating remains biologically active and has high capability to kill tumor cells.     

Preparation and characterization of amphiphilic block copolymer of polyacrylonitrile‐block‐poly(ethylene oxide)

The synthesis of polyacrylonitrile‐block‐poly(ethylene oxide) (PAN‐b‐PEO) diblock copolymers is conducted by sequential initiation and Ce(IV) redox polymerization using amino‐alcohol as the parent compound. In the first step, amino‐alcohol potassium with a protected amine group initiates the polymerization of ethylene oxide (EO) to yield poly(ethylene oxide) (PEO) with an amine end group (PEO‐NH₂), which is used to synthesize a PAN‐b‐PEO diblock copolymer with Ce(IV) that takes place in the redox initiation system. A PAN‐poly(ethylene glycol)‐PAN (PAN‐PEG‐PAN) triblock copolymer is prepared by the same redox system consisting of ceric ions and PEG in an aqueous medium. The structure of the copolymer is characterized in detail by GPC, IR, ¹H‐NMR, DSC, and X‐ray diffraction. The propagation of the PAN chain is dependent on the molecular weight and concentration of the PEO prepolymer. The crystallization of the PAN and PEO block is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1753–1759, 2003     

Two‐component “Onionlike” micelles with a PPO core,a PDMAEMA shell and a PEO corona: formation and crosslinking

BACKGROUND: Chemical or physical crosslinking of supramolecular assemblies gives them stability in a wide range of environments. Much attention is paid to multilayer (onion‐like) polymeric micelles because their functionality is higher than classic core‐shell micelles. This work reports on the formation and crosslinking of onion‐like micelles prepared by mixing two different block copolymers containing a crosslinkable poly(dimethylaminoethyl methacrylate) (PDMAEMA) block. RESULTS: Block copolymers of a crosslinkable PDMAEMA block were synthesized by atom transfer radical polymerization of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) from poly(propylene oxide) (PPO) or poly(ethylene oxide) (PEO) macroinitiators. The (PDMAEMA₁₃)‐block‐PPO₆₉‐block‐(PDMAEMA₁₃) triblock formed wormlike core‐shell micelles, which were converted into ellipsoidal onion‐like micelles on mixing with the PEO₄₅‐block‐P(DMAEMA₈‐co‐MMA₄) diblock. Onion‐like micelles were crosslinked by quaternization of DMAEMA units. CONCLUSION: Formation of onion‐like micelles by mixing two different AB (ABA) and B′C block copolymers and their subsequent crosslinking is a valuable approach towards stabilized supramolecular assemblies of a higher complexity and functionality than the individual constitutive components. Copyright © 2008 Society of Chemical Industry     

Synthesis,self‐assembly,and drug release behavior of star‐shaped poly(ε‐caprolactone)‐b‐poly(ethylene oxide) block copolymer with porphyrin core

A serial of star‐shaped poly(ε‐caprolactone)‐b‐poly(ethylene oxide) (SPPCL‐b‐PEO) block copolymers with porphyrin core were successfully synthesized from ring‐opening polymerization (ROP) of ε‐caprolactone (CL) initiated with porphyrin core, followed by coupling reaction with a hydrophilic polymer poly(ethylene oxide) (PEO) shell. The structure of this novel copolymer were synthesized and thoroughly characterized by Nuclear Magnetic Resonance (NMR), Gel Permeation Chromatography (GPC), Fourier Transform Infrared Spectroscopy (FTIR). Notably, the as‐prepared porphyrin‐cored star‐shaped copolymer could self‐assembly into different structures determined by transmission electron microscopy (TEM) and dynamic lighting scattering (DLS), which provides the great potential of using this well‐defined photodynamic therapy material for drug delivery system. Particularly, the doxorubicin‐loaded SPPCL‐b‐PEO nanosphere exhibits property of pH‐induced drug release. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40996.     

Crystallization behavior of PEO in blends of poly(ethylene oxide)/poly(2‐vinyl pyridine)‐b‐(ethylene oxide) block copolymer

The crystallization behavior of two molecular weight poly(ethylene oxide)s (PEO) and their blends with the block copolymer poly(2‐vinyl pyridine)‐b‐poly(ethylene oxide) (P2VP‐b‐PEO) was investigated by polarized optical microscopy, thermogravimetric analysis, differential scanning calorimetry, and atomic force microscopy (AFM). A sharp decreasing of the spherulite growth rate was observed with the increasing of the copolymer content in the blend. The addition of P2VP‐b‐PEO to PEO increases the degradation temperature becoming the thermal stability of the blend very similar to that of the block copolymer P2VP‐b‐PEO. Glass transition temperatures, T_g, for PEO/P2VP‐b‐PEO blends were intermediate between those of the pure components and the value increased as the content of PEO homopolymer decreased in the blend. AFM images showed spherulites with lamellar crystal morphology for the homopolymer PEO. Lamellar crystal morphology with sheaf‐like lamellar arrangement was observed for 80 wt% PEO(200M) and a lamellar crystal morphology with grain aggregation was observed for 50 and 20 wt% blends. The isothermal crystallization kinetics of PEO was progressively retarded as the copolymer content in the blend increased, since the copolymer hinders the molecular mobility in the miscible amorphous phase. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Property enhancement in polypropylene ternary blend nanocomposites via a novel poly(ethylene oxide)‐grafted polystyrene‐block‐poly(ethylene/butylene)‐block‐polystyrene toughener–compatibilizer system

Synthesis and characterization of a novel toughener–compatibilizer for polypropylene (PP)–montmorillonite (MMT) nanocomposites were conducted to provide enhanced mechanical and thermal properties. Poly(ethylene oxide) (PEO) blocks were synthetically grafted onto maleic anhydride‐grafted polystyrene‐block‐poly(ethylene/butylene)‐block‐polystyrene (SEBS‐g‐MA). Special attention was paid to emphasize the effect of PEO‐grafted SEBS (SEBS‐g‐PEO) against SEBS‐g‐MA on morphology, static/dynamic mechanical properties and surface hydrophilicity of the resultant blends and nanocomposites. It was found that the silicate layers of neat MMT are well separated by PEO chains chemically bonded to nonpolar SEBS polymer without needing any organophilic modification of the clay as confirmed by X‐ray diffraction and transmission electron microscopy analyses. From scanning electron microscopy analyses, elastomeric domains interacting with MMT layers via PEO sites were found to be distributed in the PP matrix with higher number and smaller sizes than the corresponding blend. As a benefit of PEO grafting, SEBS‐g‐PEO‐containing nanocomposite exhibited not only higher toughness/impact strength but also increased creep recovery, as compared to corresponding SEBS‐g‐MA‐containing nanocomposite and neat PP. The damping parameter of the same nanocomposite was also found to be high in a broad range of temperatures as another advantage of the SEBS‐g‐PEO toughener–compatibilizer. The water contact angles of the blends and nanocomposites were found to be lower than that of neat hydrophobic PP which is desirable for finishing processes such as dyeing and coating. © 2018 Society of Chemical Industry     

Cylinder‐to‐rod‐to‐sphere evolution of complex micelles in solution and their corresponding solvent‐induced crystallization process

In a previous paper, we investigated the solvent‐induced crystallization of films made up of spherical micelles, which were prepared by mixing polystyrene‐block‐poly(acrylic acid) and polystyrene‐block‐poly(2‐vinylpyridine)‐block‐poly(ethylene oxide) in the neutral solvent N,N‐dimethylformamide (DMF). In the work reported in the present paper, we further studied the cylinder‐to‐rod‐to‐sphere evolution of complex micelles in solution and their corresponding solvent‐induced crystallization process. The initial morphology of the micelles in the solution was cylindrical due to a rapid growth of micelles with high unimer concentration, and spheres became the dominant form after storage at room temperature for a longer time. Regular square platelets can form after a certain period of treatment for all micelles in DMF vapor for sufficient time. However, the kinetics of their solvent‐induced crystallization process is quite different. The aggregation and subsequent nucleation of poly(ethylene oxide) blocks are determined by the distribution of crystallizable poly(ethylene oxide) blocks in the films. Copyright © 2010 Society of Chemical Industry     

Simultaneously enhanced cryogenic mechanical behaviors of cyanate ester/epoxy resins by poly(ethylene oxide)‐co‐poly(propylene oxide)‐co‐poly(ethylene oxide) (PEO‐PPO‐PEO) block copolymer and clay

Cryogenic mechanical properties are important parameters for thermosetting resins used in cryogenic engineering areas. The hybrid nanocomposites were prepared by modification of a cyanate ester/epoxy/poly(ethylene oxide)‐block‐poly(propylene oxide)‐block‐poly(ethylene oxide) (PEO‐PPO‐PEO) system with clay. It is demonstrated that the cryogenic tensile strength, Young's modulus, ductility (failure strain), and fracture resistance (impact strength) are simultaneously enhanced by the addition of PEO‐PPO‐PEO and clay. The results show that the tensile strength and Young's modulus at 77 K of the hybrid nanocomposite containing 5 wt% PEO‐PPO‐PEO and 3 wt% clay were enhanced by 31.0% and 14.6%, respectively. The ductility and impact resistance at both room temperature and 77K are all improved for the hybrid composites. The fracture surfaces of the neat BCE/EP and its nanocomposites were examined using scanning electron microscopy (SEM). Finally, the dependence of the coefficients of thermal expansion (CTE) on the clay and PEO‐PPO‐PEO contents was examined by thermal dilatometer. POLYM. COMPOS., 38:2237–2247, 2017. © 2015 Society of Plastics Engineers     

Synthesis and properties of polystyrene‐b‐poly(ethylene oxide)‐b‐polystyrene triblock copolymers

A series of well‐defined and property‐controlled polystyrene (PS)‐b‐poly(ethylene oxide) (PEO)‐b‐polystyrene (PS) triblock copolymers were synthesized by atom‐transfer radical polymerization, using 2‐bromo‐propionate‐end‐group PEO 2000 as macroinitiatators. The structure of triblock copolymers was confirmed by ¹H‐NMR and GPC. The relationship between some properties and molecular weight of copolymers was studied. It was found that glass‐transition temperature (T_g) of copolymers gradually rose and crystallinity of copolymers regularly dropped when molecular weight of copolymers increased. The copolymers showed to be amphiphilic. Stable emulsions could form in water layer of copolymer–toluene–water system and the emulsifying abilities of copolymers slightly decreased when molecular weight of copolymers increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 727–730, 2006     

Synthesis and characterization of thermo‐ and pH‐sensitive block copolymers bearing a biotin group at the poly(ethylene oxide) chain end

A poly(ethylene oxide)‐block‐poly(dimethylamino ethyl methacrylate) block copolymer (PEO‐b‐PDMAEMA) bearing an amino moiety at the PEO chain end was synthesized by a one‐pot sequential oxyanionic polymerization of ethylene oxide (EO) and dimethylamino ethyl methacrylate (DMAEMA), followed by a coupling reaction between its PEO amino and a biotin derivative. The polymers were charac terized with ¹H NMR spectroscopy and gel permeation chromatography. Activated biotin, biotin‐NHS (N‐hydroxysuccinimide), was used to synthesize biotin‐PEO‐PDMAEMA. In aqueous media, the solubility of the copolymer was temperature‐ and pH‐sensitive. The particle size of the micelle formed from functionalized block copolymers was determined by dynamic light scattering. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3552–3558, 2006     

Effect of drug loading on the properties of temperature‐responsive polyester–poly(ethylene glycol)–polyester hydrogels

Hydrogels that can undergo gelation upon injection in vivo are promising systems for the site‐specific delivery of drugs. In particular, some thermo‐responsive gels require no chemical additives but simply gel in response to a change from a lower temperature to physiological temperature (37 °C). The gelation mechanism does not involve covalent bonds, and it is possible that incorporation of drugs into the hydrogel could disrupt gelation. We investigated the incorporation of drugs into thermo‐responsive hydrogels based on poly(?‐caprolactone‐co‐lactide)‐block‐poly(ethylene glycol)‐block‐poly(?‐caprolactone‐co‐lactide) (PCLA–PEG–PCLA). Significant differences in properties and in the response to incorporation of the anti‐inflammatory drug celecoxib (CXB) were observed as the PEG block length was varied from 1500 to 3000 g mol^?1. Linear viscoelastic moduli of a PCLA–PEG–PCLA hydrogel containing a 2000 g mol^?1 PEG block were least affected by the incorporation of CXB and this gel also exhibited the slowest release of CXB, so the incorporation of phenylbutazone, methotrexate, ibuprofen, diclofenac and etodolac was also investigated for this hydrogel. Different drugs resulted in varying degrees of syneresis of the hydrogels, suggesting that they interact with the polymer networks in different ways. In addition, the drugs had varying effects on the viscoelastic and compressive moduli of the gels. The results showed that the effects of drug loading on the properties of thermo‐responsive hydrogels can be substantial and depend on the drug. For applications such as intra‐articular drug delivery, in which the mechanical properties of the hydrogel are important, these effects should thus be studied on a case‐by‐case basis. © 2019 Society of Chemical Industry     

Thermoplastic hydrogel based on pentablock copolymer consisting of poly(γ‐benzyl L‐glutamate) and poloxamer

A thermoplastic hydrogel based on a pentablock copolymer composed of poly(γ‐benzyl L ‐glutamate) (PBLG) and poloxamer was synthesized by polymerization of BLG N‐carboxyanhydride, which was initiated by diamine‐terminated groups located at the ends of poly(ethylene oxide) (PEO) chains of the poloxamer, to attain a new pH‐ and temperature‐sensitive hydrogel for drug delivery systems. Circular dichroism measurements in solution and IR measurements in the solid state revealed that the polypeptide block existed in the α‐helical conformation, as in the PBLG homopolymer. The intensity of the wide‐angle X‐ray diffraction patterns of the polymers depended on the poloxamer content in the copolymer and showed basically similar reflections to the PBLG homopolymer. The melting temperature (T_m) of the poloxamer in the copolymer was reduced with an increase of the PBLG block in comparison with the T_m of the poloxamer, which is indicative of a thermoplastic property. The water contents of the copolymers were dependent on the poloxamer content in the copolymers, for example, those for the GPG‐2 (48.7 mol % poloxamer) and GPG‐1 (57.5 mol % poloxamer) copolymers were 31 and 41 wt %, respectively, indicating characteristics of a polymeric hydrogel. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2649–2656, 2003     

Poly(ethylene oxide)‐block‐polystyrene copolymers obtained by radical polymerization involving chain‐transfer processes

Poly(ethylene oxide)‐block‐polystyrene (PEO–PSt) block copolymers were prepared by radical polymerization of styrene in the presence of iodoacetate—terminated PEO (PEO‐I) as a macromolecular chain‐transfer agent. PEO‐I was synthesized by successively converting the OH end‐group of α‐methoxy ω‐hydroxy PEO to chloroacetate and then to the iodoacetate. The chain‐transfer constant of PEO‐I was estimated from the rate of consumption of the transfer agent versus the rate of consumption of the monomer (C_{tr, PEO‐I} = 0.23). Due to the involvement of degenerative transfer, styrene polymerization in the presence of PEO‐I displayed some of the characteristics of a controlled/‘living’ process, namely an increase in the molecular weight and decrease of polydispersity with monomer conversion. However, because of the slow consumption of PEO‐I due to its low chain‐transfer constant, this process was not a fully controlled one, as indicated by the polydispersity being higher than in a controlled polymerization process (1.65 versus < 1.5). The formation of PEO–PSt block copolymers was confirmed by the use of size‐exclusion chromatography and ¹H NMR spectroscopy. Copyright © 2004 Society of Chemical Industry     

Hydrogels based on poly(ethylene oxide) and poly(tetramethylene oxide) or poly(dimethyl siloxane). II. Physical properties and bacterial adhesion

To investigate the effects of polymer chemistry and topology on physical properties and bacterial adhesion, various hydrogels composed of short hydrophilic [poly(ethylene oxide) (PEO)] and hydrophobic blocks were synthesized by polycondensation reactions. Differential scanning calorimetry and X‐ray diffraction analysis confirmed that all of the hydrogels were strongly phase‐separated due to incompatibility between PEO and hydrophobic blocks such as poly(tetramethylene oxide) (PTMO) and poly(dimethyl siloxane) (PDMS). The crystallization of PEO in the hydrogels was enhanced by the incorporation of longer PEO chains, the adoption of PDMS as a hydrophobic block, and the grafting of monomethoxy poly(ethylene oxide) (MPEO). Compared to Pellethane, the control polymer, the hydrogels exhibited higher Young's moduli and elongations at break, which was attributed to the crystalline domains of PEO and the flexible characteristics of the hydrophobic blocks. The mechanical properties of the hydrogels, however, significantly deteriorated when they were hydrated in distilled water; this was primarily ascribed to the disappearance of PEO crystallity. The water capacity of hydrogels at 37°C in phosphate‐buffered saline (PBS) (pH = 7.4) was dominantly dependant on PEO content, which also influenced the thermonegative swelling behavior. From the bacterial adhesion tests, it was evident that both S. epidermidis and E. coli adhered to Pellethane much greater than to the hydrogels, regardless of the preadsorption of albumin. Better resistance to bacterial adhesion was observed in hydrogels with longer PEO chains, with PTMO as a hydrophobic block, and with MPEO grafts. The least bacterial adhesion for both species was achieved on MPEO_2k–PTMO, a hydrogel with MPEO grafts. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1505–1514, 2003