Characterization of random and multiblock copolymers of highly sulfonated poly(arylene ether sulfone) for a proton‐exchange membrane

Random and multiblock copolymers of sulfonated poly(arylene ether sulfone) (SPAES) were synthesized and characterized to compare the differences in the properties of proton‐exchange membranes made with random and multiblock SPAES copolymers. Atomic force microscopy observations and small‐angle X‐ray scattering measurements suggested the presence of nanoscale, clusterlike structures in the multiblock SPAES copolymers but not in the random SPAES copolymers. Proton‐exchange membranes were prepared from random and multiblock copolymers with various ion‐exchange capacities (IECs). The water uptake, proton conductivity, and methanol permeability of the SPAES membranes depended on the IECs of the random and multiblock SPAES copolymers. At the same IEC, the multiblock SPAES copolymers exhibited higher performances with respect to proton conductivity and proton/methanol permeation selectivity than the random SPAES copolymers. The higher performances of the multiblock SPAES copolymers were thought to be due to their clusterlike structure, which was similar to the ionic cluster of a Nafion membrane. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Multiblock poly(arylene ether nitrile) disulfonated poly(arylene ether sulfone) copolymers for proton exchange membranes: Part 1 synthesis and characterization

A series of multiblock copolymers based upon alternating segments of a hydrophilic disulfonated poly(arylene ether sulfone) and a hydrophobic fluorine-terminated poly(arylene ether benzonitrile) (6FPAEB) were synthesized and characterized for use as proton exchange membranes (PEM). The ion-exchange capacity of the block copolymers were varied by utilizing 4,4′-biphenol or hydroquinone in combination with 3,3′-disulfonated-4,4′-dichlorodiphenyl sulfone (SDCDPS) to form the hydrophilic segments. The alternating block copolymer morphology was achieved by using mild temperatures to link the oligomers together and minimize ether–ether interchange reactions. Both the 4,4′-biphenol and hydroquinone based membranes showed high proton conductivity with moderate water uptake and good mechanical properties. The block copolymers displayed nanophase separated morphologies, confirmed by transmission electron microscopy (TEM) and small angle x-ray scattering (SAXS). The strong membrane performance was attributed to the multi-phase morphology.     

Partially Fluorinated Multiblock Poly(arylene ether sulfone) Membranes for Fuel Cell Applications

Sulfonated poly(arylene ether sulfone) (SPAES‐F series) membranes, which are partially fluorinated multiblock polymers containing Bisphenol 6F (6F‐BPA), are synthesized. The membranes exhibit less water uptake and higher ion conductivity at similar ion exchange capacity (IEC) values compared to previous SPAES membranes containing identical hydrophilic blocks. This is attributed to the presence of 6F‐BPA in the hydrophobic block, which enhances hydrophobicity and promotes phase separation, as observed through transmission electron microscopy analysis. F4 (IEC = 2.4 meq g^?1) shows superior ion conductivity than Nafion NRE212 membrane irrespective of the humidity level. Furthermore, the SPAES electrolyte membrane of 1.5 meq g^?1 produces better performance than NRE212, yielding a current density of 488 mA cm^?2 at 80 °C, 80% RH, and 0.6 V. In 50% RH at 80 °C, SPAES with 1.5 meq g^?1 exhibits a cell resistance and fuel cell performance comparable to those of NRE212; clearly, regulating hydrophobicity and hydrophilicity is crucial for enhanced performance.     

Preparation and properties of bisphenol A‐based sulfonated poly(arylene ether sulfone) proton exchange membranes for direct methanol fuel cell

Novel bisphenol A‐based sulfonated poly(arylene ether sulfone) (bi A‐SPAES) copolymers were successfully synthesized via direct copolymerization of disodium 3,3′‐disulfonate‐4,4′‐dichlorodiphenylsulfone, 4,4′‐dichlorodiphenylsulfone, and bisphenol A. The copolymer structure was confirmed by Fourier transform infrared spectra and ¹H NMR analysis. The series of sulfonated copolymers based membranes were prepared and evaluated for proton exchange membranes (PEM). The membranes showed good thermal stability and mechanical property. Transmission electron microscopy was used to obtain the microstructures of the synthesized polymers. The membranes exhibit increased water uptake from 8% to 66%, ion exchange capacities from 0.41 to 2.18 meq/g and proton conductivities (25°C) from 0.012 to 0.102 S/cm with the degree of sulfonation increasing. The proton conductivities of bi A‐SPAES‐6 membrane (0.10–0.15 S/cm) with high‐sulfonated degree are higher than that of Nafion 117 membrane (0.095–0.117 S/cm) at all temperatures (20–100°C). Especially, the methanol diffusion coefficients of membranes (1.7 × 10^?8 cm²/s–8.5 × 10^?7 cm²/s) are much lower than that of Nafion 117 membrane (2.1 × 10^?6 cm²/s). The new synthesized copolymer was therefore proposed as a candidate of material for PEM in direct methanol fuel cell. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of sulfonated block copolyimides derived from 4,4'‐sulfide‐bis(naphthalic anhydride) for proton exchange membranes

A series of sulfonated copolyimides (SPIs) with hydrophilic segment length of 20–60 based on 4,4′‐sulfide‐bis(naphthalic anhydride) (SBNA) have been successfully synthesized to improve hydrolytic stability and proton conductivity. The SPI membranes were cast from their m‐cresol solutions, and they were characterized by determining the water uptake, water swelling ratio, mechanical properties, hydrolytic stability, oxidative stability, and proton conductivity. It was found that the water uptake of SPI membranes was low and decreased as the hydrophilic segment length increased, which led to good dimensional stability. In addition, the SPI membranes with low ion‐exchange capacity (IEC) value displayed excellent hydrolytic stability and retained good mechanical properties even after harsh hydrolysis testing, in which the block SPI with hydrophilic segment length of 40 had the best hydrolytic stability, while those with high IEC value showed an apparent decrease. All of the block SPI membranes show better conductivity than the random ones at the temperature range from 30 to 70°C. Interestingly, the proton conductivities of random SPI membranes were higher than that of corresponding block ones at 90°C. The block SPI with hydrophilic segment length of 40 gave the highest proton conductivity as the temperature increased among the block SPIs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41501.     

Novel hydrophilic–hydrophobic multiblock copolyimides as proton exchange membranes: Enhancing the proton conductivity

A series of novel multiblock copolymers based on sulfonated copolyimides were developed and evaluated for use as proton exchange membranes (PEMs). In these multiblock copolyimides, the hydrophilic blocks were composed of the sulfonated dianhydride and the sulfonated diamine, with sulfonic acid groups on every aromatic ring (i.e., fully sulfonated). This molecular design was implemented to effectively enhance the proton conductivity. The properties of the multiblock copolyimides with varying IEC values or block lengths were investigated to obtain a better understanding of the relationship between molecular structure and properties of proton exchange membranes. The water uptake and proton conductivity were found to be highly dependent upon their structure. The block copolymers displayed significantly higher proton conductivities, especially at low relative humidity than the random copolymers with a similar IEC. The results indicated that the distribution of sulfonic acid and the length of the blocks play a key role on properties of proton exchange membranes.     

Synthesis and characterization of multiblock semi-crystalline hydrophobic poly(ether ether ketone)–hydrophilic disulfonated poly(arylene ether sulfone) copolymers for proton exchange membranes

Multiblock copolymers based on alternating segments of telechelic phenoxide terminated hydrophilic fully disulfonated poly(arylene ether sulfone) (BPS100) and decafluorobiphenyl (DFBP) terminated hydrophobic poly(arylene ether ketimine) (PEEKt), were synthesized from the hydrophilic and ketimine-protected amorphous hydrophobic telechelic oligomers by nucleophilic coupling reactions. After film formation from DMSO, the copolymer was acidified, which converted the ketimine to semi-crystalline ketone segments and the sulfonate salts to disulfonic acids. A semi-crystalline phase with a T_m of 325 °C was confirmed. The semi-crystalline multiblock copolymer membranes were tough, ductile and solvent resistant. Fundamental properties as proton exchange membranes (PEMs) showed enhanced conductivities under fully hydrated and reduced humidity conditions. These multiblock copolymers exhibited low in-plane anisotropic swelling behavior, in contrast to the random copolymers.     

Proton exchange composite membranes from blends of brominated and sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide)

New composite proton exchange membrane was prepared by mixing a 1‐methyl‐2‐pyrrolidone (NMP) solution of sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SPPO) in sodium form and brominated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (BPPO) for hydrophilic‐hydrophobic balance, then casting the solution as a thin film, evaporating the solvent, and treating the membrane with aqueous hydrochloric acid. The resulting membranes were subsequently characterized using FTIR‐ATR, SEM‐EDXA, and TGA instrumentation as well as measurements of basic properties such as ion exchange capacity (IEC), water uptake, proton conductivity, methanol permeability, and single cell performance. Water uptake, IEC, proton conductivity, and methanol permeability all increased with a corresponding increase of SPPO content. By properly compromising the conductivity and methanol permeability, membranes with 60–80 wt % SPPO content exhibited comparable proton conductivity to that of Nafion^® 117, with only half the methanol permeability, thereby demonstrating higher single cell performance. The membranes developed in this study could thus be a suitable candidate electrolyte for proton exchange membrane fuel cells (PEMFCs). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Novel amphiphilic poly(ester‐urethane)s based on poly[(R)‐3‐hydroxyalkanoate]: synthesis,biocompatibility and aggregation in aqueous solution

BACKGROUND: The aim of this work was to develop polyhydroxyalkanoates (PHAs) for blood contact applications, and to study their self‐assembly behavior in aqueous solution when the PHAs are incorporated with hydrophilic segments. To do this, poly(ester‐urethane) (PU) multiblock copolymers were prepared from hydroxyl‐terminated poly(ethylene glycol) (PEG) and hydroxylated poly[(R)‐3‐hydroxyalkanoate] (PHA‐diol) using 1,6‐hexamethylene diisocyanate as a coupling reagent. The PEG segment functions as a soft, hydrophilic and crystalline portion and the poly[(R)‐3‐hydroxybutyrate] segment behaves as a hard, hydrophobic and crystalline portion. In another series of PU multiblock copolymers, crystalline PEG and completely amorphous poly[((R)‐3‐hydroxybutyrate)‐co‐(4‐hydroxybutyrate)] behaved as hydrophobic and hydrophilic segments, respectively. RESULTS: The formation of a PU series of block copolymers was confirmed by NMR, gel permeation chromatography and infrared analyses. The thermal properties showed enhanced thermal stability with semi‐crystalline morphology via incorporation of PEG. Interestingly, the changes of the hydrophilic/hydrophobic ratio led to different formations in oil‐in‐water emulsion and surface patterning behavior when cast into films. Blood compatibility was also increased with increasing PEG content compared with PHA‐only polymers. CONCLUSION: For the first time, PHA‐based PU block copolymers have been investigated in terms of their blood compatibility and aggregation behavior in aqueous solution. Novel amphiphilic materials with good biocompatibility for possible blood contact applications with hydrogel properties were obtained. Copyright © 2008 Society of Chemical Industry     

Synthesis of microphase‐separated poly(styrene‐co‐sodium styrene sulfonate) membranes using amphiphilic urethane acrylate nonionomers as an reactive compatibilizer

Microphase‐separated poly(styrene‐co‐sodium styrene sulfonate) random copolymer (PSSU) membranes were fabricated through a new copolymerization process. Two immiscible monomers, styrene and sodium styrene sulfonate were dissolved in a single solvent and formed homogeneous solutions, which were directly converted to wall‐to‐wall membranes via radical copolymerization process with microphase separation. Since urethane acrylate nonionomer (UAN) chain has amphiphilicity as well as reactivity with vinyl monomers, UAN chain could act not only as compatibilizer for polystyrene and poly(sodium styrene sulfonate), but also as macrocrosslinker, which makes it possible for the formation of crosslinked copolymer of two immiscible polymers without macrophase separation. TEM image of the PSSU membranes showed that nanosized hydrophilic domains formed by hydrophilic/hydrophobic microphase separation were dispersed at hydrophobic matrix phase. PSSU membranes fabricated using UAN chain having longer chain length of polyethylene oxide showed bigger size of hydrophilic domains, which was also confirmed by TEM images. Fabricated PSSU membranes showed proton conductivity higher than 10^?2 S/cm and methanol permeability lower than 10^?7 cm²/s of Nafion® 117 membranes. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Properties of Sulfonated Poly(Arylene Ether Sulfone)/Functionalized Carbon Nanotube Composite Membrane for High Temperature PEMFCs

Composite membranes are prepared using sulfonated poly (arylene ether sulfone) (SPAES) copolymers and the incorporation of functionalized multiwall carbon nanotubes (CNTs) for high temperature (120 °C) proton exchange membrane fuel cells (PEMFCs). The CNT is functionalized with sulfonated groups that are expected to support the improvement of water absorption and mechanical properties. The SPAES copolymers are synthesized with sulfonation degree (DS) = 0.5 and the sulfonated CNT (s‐CNT) is dispersed into the SPAES copolymers in varying ratios to fabricate the composite membranes. In this study, the proton conductivity, water uptake, and single cell test of the composite membrane are investigated for verifying the effects of the enhancement at high temperature and low humidity. The composite membrane containing 0.2 wt.% s‐CNT increases proton conductivity approximately 45% at 120 °C and 50% relative humidity and enhances the tensile strength by about 1.3 times compared to the pristine membrane. However, the proton conductivity and water absorption shows a decline when more than 0.2 wt.% s‐CNT is added in the composite membrane, due to the aggregation of the s‐CNT, which serves as a proton barrier. For the single cell test, the developed composite membrane with 0.2 wt.% s‐CNT exhibits a notable performance for high temperature PEMFC.     

New Proton Exchange Membranes Based on Sulfonated Poly(Arylene Ether Sulfone) Copolymers: Effect of Chain Structure on Methanol Crossover

The main drawback of direct methanol fuel cells is methanol crossover. One strategy to overcome this problem is design of new polymeric membranes. Two structurally different diols named as 4,4′-(1,4-phenylene diisopropylidene) bisphenol and 4,4′-(1,3-phenylene diisopropylidene) bisphenol (para- and meta-substituted monomers) were used to prepare two groups of poly(arylene ether sulfone)s with different structures and related membranes therefrom by solution casting. It was found that para- or meta-substitution positions in monomers affected the methanol permeability of membranes. Other influenced properties of resulted membranes such as ion exchange capacity, water uptake, proton conductivity, glass transition temperature, and mechanical strength were studied and compared.     

Synthesis and properties of sulfonated multiblock copolynaphthalimides

Sulfonated multiblock copolynaphthalimides (co-SPIs) with block length of 5-20 were prepared by a two-pot polymerization method from 1,4,5,8-naphthalenetetracarboxylic dianhydride, sulfonated diamines of 2,2′-bis(4-sulfophenoxy)benzidine (BSPOB) and 4,4′-bis(4-aminophenoxy)biphenyl-3,3′-disulfonic acid (BAPBDS) and nonsulfonated diamines. The scanning transmission electron microscopy showed that the BSPOB-based multiblock co-SPI membranes had well-defined microphase-separated structure where the hydrophilic and hydrophobic layer-like domains were oriented in the plane direction of membrane. On the other hand, the BAPBDS-based multiblock co-SPIs and all the random co-SPIs showed the homogeneous morphology. The water uptake, anisotropic membrane swelling, anisotropic proton conductivity and polymer electrolyte fuel cell (PEFC) performance were investigated for the multiblock and random co-SPIs. The results demonstrated strong effects of the membrane morphology on these properties. The BSPOB-based multiblock co-SPI membranes exhibited the larger through-plane swelling and the lower through-plane conductivity than the random ones, and as a result exhibited the lower PEFC performances. This study gives good understanding of the morphology-property relationship in novel block architectures' design.     

Synthesis and properties of sulfonated poly(phosphazene)‐graft‐poly(styrene‐co‐N‐benzylmaleimide) copolymers via atom transfer radical polymerization for proton exchange membrane

A series of sulfonated poly(phosphazene)‐graft‐poly(styrene‐co‐N‐benzylmaleimide) (PP‐g‐PSN) copolymers were prepared via atom transfer radical polymerization (ATRP), followed by regioselective sulfonation which occurred preferentially at the poly(styrene‐co‐N‐benzylmaleimide) sites. The structures of these copolymers were confirmed by Fourier transform infrared (FTIR) spectroscopy, ¹H‐NMR, and ³¹P‐NMR, respectively. The resulting sulfonated PP‐g‐PSN membranes showed high water uptakes (WUs), low water swelling ratios (SWs), low methanol permeability coefficients, and proper proton conductivities. In comparison with non‐grafting sulfonated poly(bis(phenoxy)phosphazene) (SPBPP) membrane previously reported, the present membranes displayed higher proton conductivity, significantly improved the thermal and oxidative stabilities. Transmission electron microscopy (TEM) observation showed clear phase‐separated structures resulting from the difference in polarity between the hydrophobic polyphosphazene backbone and hydrophilic sulfonated poly(styrene‐co‐N‐benzylmaleimide) side chains, indicating effective ionic pathway in these membranes. The results showed that these materials were promising candidate materials for proton exchange membrane (PEM) in direct methanol fuel cell (DMFC) applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42251.     

Hydrophilic-hydrophobic multiblock copolymers based on poly(arylene ether sulfone) via low-temperature coupling reactions for proton exchange membrane fuel cells

Two series of multiblock copolymers based on poly(arylene ether sulfone)s were developed and evaluated for use as proton exchange membranes (PEMs). The multiblock copolymers were synthesized by a coupling reaction between phenoxide terminated fully disulfonated poly(arylene ether sulfone) (BPSH100) and decafluorobiphenyl (DFBP) or hexafluorobenzene (HFB) end-capped unsulfonated poly(arylene ether sulfone) (BPS0) as hydrophilic and hydrophobic blocks, respectively. The highly reactive nature of DFBP and HFB allowed the coupling reactions to be accomplished under mild reaction conditions (e.g., <105 °C). The low coupling temperatures prevented possible ether-ether exchange reactions which can cause a loss of order due to randomization of the hydrophilic-hydrophobic sequences. The multiblock copolymers produced tough and ductile membranes and their fundamental properties as PEMs were explored. They showed enhanced conductivities under fully hydrated conditions when compared with a random BPSH copolymer with a similar IEC. These copolymers also showed anisotropic swelling behavior, whereas the random copolymers were isotropic. The synthesis and fundamental properties of the multiblock copolymers are reported here and the systematic fuel cell properties and more detailed morphology characterization will be provided elsewhere.     

SPTES-b-PI质子交换膜的制备及表征

质子交换膜作为质子交换膜燃料电池的核心部件具有提供离子通道传递质子和隔绝两极气体的双重作用,其性能的好坏直接影响着电池性能的优劣。主链引入亲水和疏水段的嵌段芳香族共聚物,由于各嵌段之间具有热力学不相容性会产生微相分离结构,进而形成高效的质子传导通道。本文以磺化双（4-氟苯基）砜（SDFDPS）和4,4'-硫代双苯硫酚（TBBT）为单体,以间羟基苯胺为封端剂合成了带有氨端基的磺化聚芳硫醚砜（SPTES-NH₂）。嵌段聚合物SPTES-b-PI通过亲水段SPTES-NH₂与以1,4,5,8-萘四羧酸二酐（NDA）和4,4'-双（3-氨基苯氧基）二苯基砜（m-BAPS）为单体缩聚而成的疏水段聚酰亚胺（PI）的酰亚胺化偶联反应来合成,制备出了PI分子量不同的SPTES-b-PIx（x=5~20kg/mol）。SPTES-b-PIx膜显示出优异的热力学稳定性,SPTES-b-PIx膜的脱磺化反应开始于290℃高于260℃的SPTES膜,与SPTES-70相比吸水率降低。随着聚酰亚胺分子量的增大,热稳定性增加,质子传导率增加。SPTES-b-PIx的质子传导率25℃下达到0.045~0.124S/cm。     

Sulfonated poly(ether ether sulfone) copolymers for proton exchange membrane fuel cells

Novel aromatic sulfonated poly(ether ether sulfone)s (SPEESs) with tert‐butyl groups were synthesized by aromatic nucleophilic polycondensation of disodium 3,3′‐disulfonate‐4,4′‐dichlorodiphenylsulfone (SDCDPS), 4,4′‐dichlorodiphenylsulfone (DCDPS), and tert‐butylhydroquinone (TBHQ). The resulting copolymers showed very good thermal stability and could be cast into tough membranes. The morphology of the membranes was investigated with atomic force microscopy. The proton conductivity of SPEES‐40 membranes increased from 0.062 S/cm at 25°C to 0.083 S/cm at 80°C, which was higher than the 0.077 S/cm of Nafion 117 under the same testing conditions. These copolymers are good candidates to be new polymeric electrolyte materials for proton exchange membrane fuel cells. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1443–1450, 2007     

Sulfonated polyimide and poly (ethylene glycol) diacrylate based semi‐interpenetrating polymer network membranes for fuel cells

Semi‐interpenetrating polymer network (semi‐IPN) membranes based on novel sulfonated polyimide (SPI) and poly (ethylene glycol) diacrylate (PEGDA) have been prepared for the fuel cell applications. SPI was synthesized from 1,4,5,8‐naphthalenetetracarboxylic dianhydride, 4,4′‐diaminobiphenyl 2,2′‐disulfonic acid, and 2‐bis [4‐(4‐aminophenoxy) phenyl] hexafluoropropane. PEGDA was polymerized in the presence of SPI to synthesize semi‐IPN membranes of different ionic contents. These membranes were characterized by determining, ion exchange capacity, water uptake, water stability, proton conductivity, and thermal stability. The proton conductivity of the membranes increased with increasing PEGDA content in the order of 10^?1 S cm^?1 at 90°C. These interpenetrating network membranes showed higher water stability than the pure acid polyimide membrane. This study shows that semi‐IPN SPI membranes based on PEGDA which gives hydrophilic group and structural stability can be available candidates comparable to Nafion® 117 over 70°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Sulfonated poly(ether ether ketone)/epoxy/phenol novolac blend proton‐exchange membranes with low methanol permeability

A crosslinked epoxy [4,4′‐diglycidyl‐(3,3′,5,5′‐tetramethylbiphenyl) epoxy resin (TMBP)], cured by phenol novolac (PN), was introduced into a sulfonated poly(ether ether ketone) (SPEEK) membrane (ion‐exchange capacity = 2.0 mequiv/g) with a casting‐solution, evaporation, and heating crosslinking method to improve the mechanical properties, dimensional stability, water retention, and methanol resistance. By Fourier transform infrared analysis, the interactions between the sulfonic acid groups and hydroxyl groups in the blend membranes were confirmed. The microstructure and morphology of the blend membranes were investigated with atomic force microscopy. As expected, the blend membranes showed excellent mechanical properties, good thermal properties (thermal stability above 200°C), lower swelling ratios (1.4% at 25°C and 7.0% at 80°C), higher water retention (water diffusion coefficient = 9.8 × 10^?6 cm²/s), and a lower methanol permeability coefficient (3.6 × 10^?8 cm²/s) than the pristine SPEEK membrane. Although the proton conductivity of the blend membranes decreased, a higher selectivity (ratio of the proton conductivity to the methanol permeability) was obtained than that of the pristine SPEEK membrane. The results showed that the SPEEK/TMBP/PN blend membranes could have potential use as proton‐exchange membranes in direct methanol fuel cells. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Sulfonated poly(arylene ether ketone)s prepared by direct copolymerization as proton exchange membranes: Synthesis and comparative investigation on transport properties

Sulfonated poly(aryl ether ketone)s (SPAEK) copolymers were synthesized by aromatic nucleophilic polycondensation from 3,3′, 5,5′‐tetramethyl‐4, 4′–biphenol, 1,4‐bis(4‐fluorobenzoyl) benzene, and disulfonated difluorobenzophenone. The SPAEK membranes did not exhibit excessive swelling in hot water and at the same time show the proton conductivities in the range of 0.030 S/cm to 0.099 S/cm at 80°C. The methanol diffusion coefficients of the SPAEK membranes were in the range of 4.7 × 10^?7 to 8.1 × 10^?7cm²/s measured at 25°C. The transport properties of this series of SPAEK copolymers were compared to poly(aryl ether ether ketone)s (SPEEK), poly(aryl ether ether ketone ketone)s (SPEEKK), and Nafion® membranes. It was found that the transport properties (including proton conductivity and methanol permeability) follows the trend of SPEEKK‐60 < SPAEK‐60 < SPEEK‐60 < Nafion® 117, the order of which is also attributed to the differences in the chemical structure of the polymers and the membrane morphology. In general, this novel series of SPAEK membranes possess various advantages, such as low cost of the initial monomers, high thermal and mechanical stability, and low methanol permeability while simultaneously possessing sufficient proton conductivity, which makes them notably promising as proton exchange membrane (PEM) materials in direct methanol fuel cell (DMFC) applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008