Synergistic effects of expandable graphite with magnesium hydroxide on the flame retardancy and thermal properties of polypropylene

In this study, the flammability characterization and synergistic effects of different particle size of expandable graphite (EG) with modified magnesium hydroxide (MH) in flame‐retardant polypropylene (PP) composites were studied by limiting oxygen index (LOI), UL‐94 test, thermogravimetric analysis (TGA), and fourier transform infrared (FTIR) spectroscopy. The results showed that the particle size of EG had a great effect on the flammability of the PP/MH/EG composites. The EG2 with smaller particle size could apparently increase the LOI value and improved the UL‐94 flammability properties rating of the PP composites. The data obtained from the TGA and FTIR curves indicated that the thermo‐oxidative stability of PP/MH/EG composites increased with decreasing particle size of EG. And the smaller the particle size of EG, the higher the residues of the composite. POLYM. ENG. SCI., 47:1756–1760, 2007. © 2007 Society of Plastics Engineers     

Effect of charring agent THEIC on flame retardant properties of polypropylene

Tris(2‐hydroxyethyl) isocyanurate (THEIC) was used as charring agent and combined with ammonium polyphosphate (APP) to form an intumescent flame retardant (IFR) for polypropylene (PP). The flame retardancy and combustion performance of PP/IFR composite was tested by limiting oxygen index (LOI), UL‐94 vertical burning test and cone calorimeter. The results showed that PP/IFR composite had highest LOI of 34.8 and obtained V‐0 rating when 30 wt % IFR was loaded and mass ratio APP/THEIC was 2 : 1. The peak heat release (PHRR) and total heat release (THR) values of PP composite containing FRs were remarkably reduced compared with that of pure PP. However, water resistant test demonstrated the PP/IFR composite had poor flame retardant durability, both the LOI value and UL‐94 V‐rating decreased when PP/IFR composite was soaked in water at 70°C after 36 h. The degradation process and the char morphology of IFR and PP/IFR composite were investigated by TGA and SEM images. The possible reaction path between APP and THEIC in the swollen process was proposed. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41214.     

Flammability and thermal degradation of intumescent flame‐retardant polypropylene composites

The flammability of polypropylene (PP) composites containing intumescent flame‐retardant additives, i.e., melamine pyrophosphate (MPP) and 1‐oxo‐4‐hydroxymethyl‐2,6,7‐trioxa‐1‐phosphabicyclo[2.2.2]octane (PEPA) was characterized by limiting oxygen index (LOI), UL 94 test, and cone calorimeter. In addition, the thermal degradation of the composites was studied using thermogravimetric analysis (TG) and real‐time Fourier transform infrared (RTFTIR). It has been found that the PP composite only containing MPP (or PEPA) does not show good flame retardancy even at 30% additive level. Compared with the PP/MPP binary composite, the LOI values of the PP/MPP/PEPA ternary composites at the same additive loading are all increased, and UL 94 rating of the ternary composite (PP3) studied is raised to V‐0 rating from no rating (PP/MPP). The cone calorimeter results show that the heat release rate of some ternary composites decreases in comparison with the binary composite. It is noted from the TG data that initial decomposition temperatures of ternary composites are lower than that of the binary composites. The RTFTIR study indicates that the PP/MPP/PEPA composites have higher thermal oxidative stability than the pure PP. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Microencapsulated ammonium polyphosphate by polyurethane with segment of dipentaerythritol and its application in flame retardant polypropylene

Dipentaerythritol (DPER), 4, 40-diphenylmethanediisocyanate (MDI) and melamine (MEL) are used as raw materials to microencapsulate ammonium polyphosphate (MAPP) in situ polymerization. The MAPP is characterized by Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and thermal gravimetric analysis (TGA). The results show that the coating operation can effectively improve water resistance of ammonium polyphosphate (APP), and MAPP has higher residual rate than that of APP after combustion. The flame retardant action of MAPP and APP in polypropylene (PP) is investigated by the limited oxygen index (LOI), vertical burning test (UL-94), TGA, SEM, and cone calorimeter test (CCT). The LOI value of the PP/MAPP composite at the same loading is higher than that of PP/APP composite. UL 94 ratings of PP/MAPP composites are raised to V-0 at 20 wt% loading. The results of CCT also show that MAPP is more efficient than APP. The morphological structures observed by digital photos and SEM demonstrated that MAPP could be promoted to form the continuous and compact intumescent char layer. The flame retardant mechanism of PP/MAPP is also discussed.     

Synthesis of novel triazine charring agent and its effect in intumescent flame‐retardant polypropylene

A novel charring agent (CNCA‐DA) containing triazine and benzene ring, using cyanuric chloride, aniline, and ethylenediamine as raw materials, was synthesized and characterized. The effects of CNCA‐DA on flame retardancy, thermal degradation, and flammability properties of polypropylene (PP) were investigated by limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis (TGA), and cone calorimeter test (CCT). The TGA results showed that CNCA‐DA had a good char forming ability, and a high initial temperature of thermal degradation; the char residue of CNCA‐DA reached 18.5% at 800°C; Ammonium polyphosphate (APP) could improve the char residue of APP/CNCA‐DA system, the char residue reached 31.6% at 800°C. The results from LOI and UL‐94 showed that the intumescent flame retardant (IFR) containing CNCA‐DA and APP was very effective in flame retardancy of PP. When the mass ratio of APP and CNCA‐DA was 2 : 1, and the IFR loading was 30%, the IFR showed the best effect; the LOI value reached 35.6%. It was also found that when the IFR loading was only 20%, the flame retardancy of PP/IFR can still pass V‐0 rating in UL‐94 tests, and its LOI value reached 27.1%. The CCT results demonstrated that IFR could clearly change the decomposition behavior of PP and form a char layer on the surface of the composites, consequently resulting in efficient reduction of the flammability parameters, such as heat release rate (HRR), total heat release (THR), smoke production rate (SPR), total smoke production (TSP), and mass loss (ML). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Vinyl polysiloxane microencapsulated ammonium polyphosphate and its application in flame retardant polypropylene

Vinyl polysiloxane microencapsulated ammonium polyphosphate (MAPP) was prepared by a sol-gel method using vinyltrimethoxysilane as a precursor to improve its thermal stability and hydrophobicity. The MAPP was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and thermogravimetric analyzer (TGA). The results showed that ammonium polyphosphate (APP) was successfully coated with vinyl polysiloxane. MAPP and pentaerythritol (PER) were used together to improve the flame retardancy of polypropylene (PP). The flame retardant properties of PP composites were investigated by limiting oxygen index (LOI), UL-94 test, TGA and SEM. When the MAPP was added as a flame retardant, with PER as a char forming agent, the LOI of PP/MAPP/PER composites was 33.1%, and it reached the UL-94 V-0 level. The results also demonstrated that the flame retardant properties of PP/MAPP/PER composites were better than those of PP/APP/PER composites at the same loading. Moreover, the addition of flame retardant and carbon forming agent could promote the crystallization behavior of PP.     

Influence of polyamide 6 as a charring agent on the flame retardancy,thermal, and mechanical properties of polypropylene composites

In this work, polyamide 6 (PA6) as a charring agent has been used in combination with thermoplastic polyurethane (TPU)‐microencapsulated ammonium polyphosphate (MTAPP) forming intumescent flame retardants (IFRs) which applies in polypropylene (PP). The effects of the IFRs on the flame retardancy, morphology of char layers, water resistance, thermal properties and mechanical properties of flame‐retardant PP composites are investigated by limiting oxygen index (LOI), UL‐94 test, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and mechanical properties test. The results show that the PP/MTAPP/PA6 composites exhibit much better flame‐retardant performances than the PP/MTAPP composites. The higher LOI values and UL‐94 V‐2 of the PP/MTAPP composites with suitable amount of PA6 are obtained, which is attributed to the thick and compact char layer structure evidenced by SEM. The results from TGA and DSC demonstrate that the introduction of PA6 into PP/MTAPP composites has a great effect on the thermal stability and crystallization behaviors of the composites. Furthermore, the mechanical properties of PP/MTAPP/PA6 composites are also improved greatly due to the presence of PA6 as a charring agent. POLYM. ENG. SCI., 55:1355–1360, 2015. © 2015 Society of Plastics Engineers     

Combustion characteristics and synergistic effects of red phosphorus masterbatch with expandable graphite in the flame retardant HDPE/EVA composites

In this work, the flammability behaviors and synergistic effects of red phosphorus masterbatch (RPM) with expandable graphite (EG) in flame‐retardant high‐density polyethylene/ethylene vinyl‐acetate copolymer (HDPE/EVA) composites have been investigated by limiting oxygen index (LOI), UL‐94 test, cone calorimeter test (CCT), thermogravimetric analysis (TGA), Fourier‐transform infrared (FTIR) and scanning electron microscopy (SEM). The data obtained from LOI, UL‐94 test and CCT showed that suitable amount of RPM had synergistic effects with EG in the HDPE/EVA/EG/RPM composites. The addition of RPM greatly increased the LOI values by 3.4%, obtained UL‐94 V‐0 rating, decreased the heat release rates and total heat release, and prolongated the ignition time when 6.7 phr RPM substituted for EG in the HDPE/EVA/EG/RPM composites. The data from TGA and FTIR spectra also indicated the synergistic effects of RPM with EG considerably enhanced the thermal degradation temperatures. The morphological observations after UL‐94, CCT, and SEM images presented positive evidences that the synergistic effects took place for RPM with EG, and the flame‐retardant mechanism has been changed in flame‐retardant HDPE/EVA/EG/RPM composites. The formation of stable and compact charred residues promoted by RPM acted as effective heat barriers and thermal insulations, which improved the flame‐retardant performances and prevented the underlying polymer materials from burning. POLYM. ENG. SCI., 55:2884–2892, 2015. © 2015 Society of Plastics Engineers     

Effects of organopalygorskite on intumescent flame‐retarded polypropylene

The effect of organopalygorskite (OPGS) on an intumescent flame retardant (IFR) low‐density polypropylene (PP) has been investigated using the limited oxygen index (LOI), vertical burning test (UL‐94) and thermogravimetric analysis (TGA). The results of the LOI and UL‐94 tests indicate that the addition of OPGS substantially increases the LOI value for PP/IFR at a OPGS to IRF mass ratio of 2/28 with 30 wt% of total flame retardant. In addition, the samples pass the V‐0 rating in the UL‐94 tests. The results indicate that the addition of 2.0 wt% of OPGS simultaneously increases the tensile strength and bending strength of PP/IFR. J. VINYL ADDIT. TECHNOL., 24:281–287, 2018. © 2016 Society of Plastics Engineers     

A novel halogen‐free intumescent flame retardant containing phosphorus and nitrogen and its application in polypropylene systems

A novel halogen‐free intumescent flame retardant, pentaerythritol spirobisphosphoryl‐dicyandiamide (SPDC), was synthesized and characterized by FTIR, ¹H NMR, and ³¹P NMR spectra. The new flame retardant was used in polypropylene (PP) to prepare flame‐retardant materials whose flammability and thermal behavior were studied by the limiting oxygen index (LOI) method, thermogravimetric analysis (TGA), and cone calorimetry (CONE). The mechanical properties were also investigated. The results indicated that when the addition of SPDC reached 30 wt%, the material showed both excellent flame retardancy and anti‐dripping abilities for PP. Moreover, the LOI value of the PP‐IFR(30%) was 32.5, and it passed the UL‐94 V‐0 rating test. The CONE results revealed that in PP, SPDC(30%) significantly decreased the peak heat release, total heat release, and smoke relative to their values for pure PP. The morphological structures observed by SEM demonstrated that SPDC could promote the formation of a homogeneous and compact intumescent char layer. The TGA data showed that SPDC could enhance the thermal stability of PP and effectively increase the char residue formation. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Flame retardancy and water resistance of novel intumescent flame‐retardant oil‐filled styrene–ethylene–butadiene–styrene block copolymer/polypropylene composites

A novel halogen‐free flame‐retardant composite consisting of an intumescent flame retardant (IFR), oil‐filled styrene–ethylene–butadiene–styrene block copolymer (O‐SEBS), and polypropylene (PP) was studied. On the basis of UL‐94 ratings and limiting oxygen index (LOI) data, the IFRs consisted of a charring–foaming agent, ammonium polyphosphate, and SiO₂ showed very effective flame retardancy and good water resistance in the IFR O‐SEBS/PP composite. When the loading of IFR was only 28 wt %, the IFR–O‐SEBS/PP composite could still attain a UL‐94 V‐0 (1.6 mm) rating, and its LOI value remained at 29.8% after a water treatment at 70°C for 168 h. Thermogravimetric analysis data indicated that the IFR effectively enhanced the temperature of the main thermal degradation peak of the IFR–O‐SEBS/PP composites because of the formation of abundant char residue. The flammability parameters of the composites obtained from cone calorimetry testing demonstrated that water treatment almost did not affect the flammability behavior of the composite. The morphological structures of the char residue and fractured surfaces of the composites were not affected by the water treatment. This was attributed to a small quantity of IFR extracted from the composite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39575.     

Thermal degradation and combustion behaviors of flame retarded glass fiber reinforced polyamide 6 composites based on cerium hypophosphite

In this work, cerium hypophosphite (CeHP) was synthesized and characterized by scanning electron microscope (SEM) and thermogravimetric analysis (TGA) test. CeHP presented rod‐like morphological feature with good thermal stability. Subsequently, CeHP was added into glass fiber reinforced polyamide 6 (GFPA) to develop flame retardant glass fiber reinforced polyamide 6 composites (FR‐GFPA). The flame retardancy of FR‐GFPA composites was characterized by limiting oxygen index (LOI), Underwriters Laboratories 94 testing (UL‐94), microscale combustion calorimeter, and cone calorimeter test. FR‐GFPA composite with 20 wt% CeHP loading passed UL‐94 V0 rating with a high LOI of 26.5 vol%. Cone Calorimeter test showed that peak of heat release rate (PHRR) and total heat release (THR) of FR‐GFPA composites were reduced 27.1% and 21.1% compared with those of GFPA. The mechanical measurement revealed that the tensile strength first increased and then decreased with the increase of CeHP loading. With 15 wt% CeHP loading, the tensile strength of FR‐GFPA composite was 43.0% higher than GFPA. TGA and char residue characterization revealed that the addition of CeHP could significantly promote the formation of condensed char residue. The FR‐GFPA composites obtained herein exhibited superior combined properties of fire resistance, thermal stability, and mechanical properties, demonstrating that CeHP will be a promising candidate for preparing high performance polyamide composites. POLYM. COMPOS., 37:3073–3082, 2016. © 2015 Society of Plastics Engineers     

苯基聚硅氧烷微胶囊化聚磷酸铵的制备及其在PP中阻燃性能研究

采用苯基三甲氧基硅烷为前驱体,通过溶胶凝胶法制备出苯基聚硅氧烷微胶囊化聚磷酸铵（MAPP）。将MAPP作为阻燃剂,季戊四醇（PER）作为成炭剂,制备阻燃聚丙烯（PP）。用傅里叶红外光谱、扫描电子显微镜、能谱仪及热重分析仪对MAPP进行表征。结果表明,聚磷酸铵（APP）被苯基聚硅氧烷成功包覆;较之APP,MAPP的热稳定性和疏水性显著提高;MAPP的阻燃性能优于APP,PP/MAPP/PER复合材料达到V-0级别;阻燃剂及成炭剂的加入对PP的结晶行为有促进作用。     

木粉及聚磷酸铵对PE-HD木塑复合材料阻燃和力学性能的影响

以高密度聚乙烯(PE-HD)为基体,聚磷酸铵(APP)和木粉(WF)为膨胀型阻燃体系,制备了阻燃木塑复合材料(WPC)。通过极限氧指数、垂直燃烧UL 94、锥形量热分析、热失重分析、红外光谱分析、力学性能等对其进行性能表征。结果表明,与纯PE-HD相比,极限氧指数随着WF含量增加而提高,添加40 %WF时极限氧指数提高到30.5 %,UL 94可达V-0等级,热释放速率峰值和总热释放量降低;APP和WF燃烧过程中发生了化学作用,形成了保护炭层,提高了材料的热稳性,材料的拉伸和弯曲强度得到提高。     

Morphological,mechanical, and physical properties of composites made with wood flour‐reinforced polypropylene/recycled poly(ethylene terephthalate) blends

Wood flour (WF)‐filled composites based on a polypropylene (PP)/recycled polyethylene terephthalate (r‐PET) matrix were prepared using two‐step extrusion. Maleic anhydride grafted polypropylene (MAPP) was added to improve the compatibility between polymer matrices and WF. The effects of filler and MAPP compatibilization on the water absorption, mechanical properties, and morphological features of PP/r‐PET/WF composites were investigated. The addition of MAPP significantly improved mechanical properties such as tensile strength, flexural strength, tensile modulus, and flexural modulus compared with uncompatibilized composites, but decreased elongation at break. Scanning electron microscopic images of fracture surface specimens revealed better interfacial interaction between WF and polymer matrix for MAPP‐compatibilized PP/r‐PET/WF composites. MAPP‐compatibilized PP/r‐PET/WF composites also showed reduced water absorption due to improved interfacial bonding, which limited the amount of absorbable water molecules. These results indicated that MAPP acts as an effective compatibilizer in PP/r‐PET/WF composites. POLYM. COMPOS., 38:1749–1755, 2017. © 2015 Society of Plastics Engineers     

Flame retardation and thermal degradation of intumescent flame‐retarded polypropylene composites containing spirophosphoryldicyandiamide and ammonium polyphosphate

A novel halogen‐free intumescent flame retardant, spirophosphoryldicyandiamide (SPDC), was synthesized and combined with ammonium polyphosphate (APP) to produce a compound intumescent flame retardant (IFR). This material was used in polypropylene (PP) to obtain IFR‐PP systems whose flammability and thermal behavior were studied by the limiting oxygen index (LOI) test, UL‐94, thermogravimetric analysis, and cone calorimetry. In addition, the mechanical properties of the systems were investigated. The results indicated that the compound intumescent flame retardant showed both excellent flame retardancy and antidripping ability for PP when the two main components of the IFR coexisted in appropriate proportions. The optimum flame retardant formulation was SPDC:APP = 3:1, which gave an LOI value of 38.5 and a UL‐94 V‐0 rating. Moreover, the heat release rate, production of CO, smoke production rate, and mass loss rate of the IFR‐PP with the optimum formulation decreased significantly relative to those of pure PP, according to the cone calorimeter analysis. The char residues from the cone calorimetry experiments were observed by scanning electron microscopy, which showed that a homogeneous and compact intumescent char layer was formed. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Synergistic effect of kaolinite/halloysite on the flammability and thermostability of polypropylene

Kaolinite (Kaol) and halloysite nanotubes (HNT) are both aluminosilicate clays with similar chemical formulation and different microshapes. In this article, nanotubular HNT and nanoplate Kaol together were introduced into polypropylene (PP) containing intumescent flame retardant (IFR). The flammability of the PP composites was characterized by limiting oxygen index (LOI), vertical burning (UL‐94), and cone calorimeter tests (CCT). The results showed that for the composite with 75 wt % PP and 25 wt % IFR, its LOI was 31.0% and it obtained a UL‐94 grade of V‐2. For the composite of 75 wt % PP, 23.5 wt % IFR, and 1.5 wt % (Kaol/HNT = 9/1), its LOI increased to 36.9 and it obtained a UL‐94 grade of V‐0; at the same time, its peak heat release rate value in CCT decreased by 82.2% compared to neat PP. The thermostability analysis indicated that the mixture of Kaol/HNT could improve the thermostability and final char yield. The char residues were comprehensively analyzed by scanning electron microscopy and Fourier transform infrared spectroscopy. The results illustrated that the Kaol/HNT combination was beneficial to forming a crosslinked network and promoting formation of a compact char with higher strength. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46507.     

Highly efficient fire retardant behavior,thermal stability,and physicomechanical properties of rigid polyurethane foam based on recycled poly(ethylene terephthalate)

This study focused on the burning phenomena, thermal stability, and physicomechanical properties of polyurethane foam based on recycled poly(ethylene terephthalate) (RPUF) with and without halogen-free flame retardants (FRs). Flammability behavior and associated mechanisms were studied by cone calorimetry, LOI, UL 94, FTIR, TGA, FE-SEM, and XPS. The results of cone calorimeter testing indicate improved FR performance with notable reductions in peak heat release rate (~39.1%), peak CO production (~61.7%), and peak CO₂ production (~43.0%). LOI values significantly increase, up to 29.5–47.1%, in the presence of FRs, and V-0 ratings are attained even at a rather low loading of FR (6.07 wt%). Meanwhile, the RPUF completely burns to the holder clamp with a low LOI value (17%), and it do not pass the UL94 HB standard. The addition of FRs notably improves the residual char of RPUF, indicating that FRs contributed to the formation of a barrier layer to protect RPUF during degradation. The comparison between experimentally determined TGA results and calculated values provides support for the effect of FRs on the thermal degradation behavior of RPUF. Sorption isotherm experiments of RPUF/FR systems show low moisture absorptivity and a weak hysteresis effect due to strong intermolecular bonds between RPUF and added FRs. The compression test, density, and morphology of foam samples are also discussed.     

Fire performance and thermal stability of polypropylene nanocomposites containing organic phosphinate and ammonium polyphosphate additives

In order to develop polymer‐clay nanocomposites with reduced flammability by incorporation of char‐forming conventional nitrogen and phosphorus based flame retardants at low loading levels, the polypropylene‐clay nanocomposites were prepared by melt blending method with Cloisite 15A (15A), organic phosphinate (OP) and ammonium polyphosphate (AP) additives. Thermal analysis shows that addition of 5% 15A along with 15% (w/w) OP in polypropylene (PP)/PPgMA increases the thermal stability of PP/PPgMA/OP/15A composite by 82 °C showing synergistic effect, and the PP/PPgMA/AP/15A sample with same loading becomes thermally stable by 70 °C. Cone calorimeter analysis of the PP/PPgMA/OP/15A and PP/PPgMA/AP/15A composites measures the reduction in peak heat release rate values by 66% and 58%, respectively. Addition of 20% OP to PP/PPgMA enhances the limiting oxygen index (LOI) value and gives V‐2 rating of UL‐94 test. Further, on replacing 5% OP with 5% 15A for PP/PPgMA/OP/15A sample without changing the total 20% loading, the LOI value increases further slightly but give no UL‐94 rating. Also, PP/PPgMA/AP/15A sample with same loading similar to that of PP/PPgMA/OP/15A sample shows an enhancement in LOI value and gives no rating in UL‐94 test. No relation was observed between LOI values and UL‐94 test rating in the present study. Copyright © 2012 John Wiley & Sons, Ltd.     

三聚氯化磷腈微胶囊阻燃剂/聚丙烯复合材料的性能研究

Microcapsulated chlorocyclophosphazenes were synthesized,and then microcapsulated chlorocyclo- phosphazene/polypropylene（PP）composites were prepared.The results showed that microcapsulated chlorocyclo- phosphazene had good high thermal stability through thermogravimetric analysis（TGA）.The flammability and mechanical properties of microcapsulated chlorocyclophosphazene/polypropylene composites were investigated by limiting oxygen index experiment,UL 94V flame retardancy test,cone calorimetry,tensile experiment,and impact test,respectively.It was shown that the microcapsulated chlorocyclophosphazene/PP composites had better tensile strength,impact strength,flame retardant properties and smoke suppress properties compared with chlorocyclo- phosphazene/PP composites.