Synthesis and characterization of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers with dibutylmagnesium as catalyst

Two series of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers were prepared by the ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) and dibutylmagnesium in 1,4‐dioxane solution at 70°C. The triblock structure and molecular weight of the copolymers were analyzed and confirmed by ¹H NMR, ¹³C NMR, FTIR, and gel permeation chromatography. The crystallization and thermal properties of the copolymers were investigated by wide‐angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). The results illustrated that the crystallization and melting behaviors of the copolymers were depended on the copolymer composition and the relative length of each block in copolymers. Crystallization exothermal peaks (T_c) and melting endothermic peaks (T_m) of PEG block were significantly influenced by the relative length of PCL blocks, due to the hindrance of the lateral PCL blocks. With increasing of the length of PCL blocks, the diffraction and the melting peak of PEG block disappeared gradually in the WAXD patterns and DSC curves, respectively. In contrast, the crystallization of PCL blocks was not suppressed by the middle PEG block. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Injectable thermosensitive hydrogels for intra‐articular delivery of methotrexate

Intra‐articular drug delivery is the preferred approach for targeting pharmacologic treatment directly at the joints to reduce undesirable side effects associated with systemic drug delivery. In this study, a controlled delivery system of methotrexate (MTX) based on injectable thermosensitive poly(ε‐caprolactone)‐poly(ethylene glycol)‐poly(ε‐caprolactone) (PCL‐PEG‐PCL, PEP) hydrogels was developed for the intra‐articular drug delivery. The thermosensitive PEP copolymers were prepared by ring‐opening polymerization. The synthesized PEP copolymers were characterized for their structure, composition, and the sol‐to‐gel transition. The in vitro MTX release from the PEP hydrogels was studied. MTX plasma concentration following intra‐articular injection into healthy rats was determined by HPLC. Biocompatibility was confirmed by histology analysis after the intra‐articular injection. The synthesized PEP copolymers aqueous solutions formed in situ gel rapidly after the injection. PEP hydrogels showed the ability to control the release of incorporated MTX. Following intra‐articular injection, the PEP hydrogels decreased the clearance rate of MTX in the joint cavity. The maximum plasma concentrations of MTX in rats injected with free MTX were threefold higher than that of the groups injected with MTX hydrogels. These results suggest that the intra‐articular delivery of the PEP hydrogels may be a viable strategy for the controlled release of drugs for treating arthritis diseases. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,characterization and biocompatibility of novel biodegradable poly[((R)‐3‐hydroxybutyrate)‐block‐(D,L‐lactide)‐block‐(ε‐caprolactone)] triblock copolymers

BACKGROUND: Biodegradable block copolymers have attracted particular attention in both fundamental and applied research because of their unique chain architecture, biodegradability and biocompatibility. Hence, biodegradable poly[((R )‐3 ‐hydroxybutyrate)‐block‐(D ,L ‐lactide)‐block‐(ε‐caprolactone)] (PHB‐PLA‐PCL) triblock copolymers were synthesized, characterized and evaluated for their biocompatibility. RESULTS: The results from nuclear magnetic resonance spectroscopy, gel permeation chromatography and thermogravimetric analysis showed that the novel triblock copolymers were successfully synthesized. Differential scanning calorimetry and wide‐angle X‐ray diffraction showed that the crystallinity of PHB in the copolymers decreased compared with methyl‐PHB (LMPHB) oligomer precursor. Blood compatibility experiments showed that the blood coagulation time became longer accompanied by a reduced number of platelets adhering to films of the copolymers with decreasing PHB content in the triblocks. Murine osteoblast MC3T3‐E1 cells cultured on the triblock copolymer films spread and proliferated significantly better compared with their growth on homopolymers of PHB, PLA and PCL, respectively. CONCLUSION: For the first time, PHB‐PLA‐PCL triblock copolymers were synthesized using low molecular weight LMPHB oligomer as the macroinitiator through ring‐opening polymerization with D ,L ‐lactide and ε‐caprolactone. The triblock copolymers exhibited flexible properties with good biocompatibility; they could be developed into promising biomedical materials for in vivo applications. Copyright © 2008 Society of Chemical Industry     

Synthesis and characterization of new biodegradable comb‐dendritic triblock copolymers

A series of well‐defined dumbbell‐shaped triblock copolymers consisting of linear poly(ethylene glycol) (PEG) and comb‐like poly(ε‐caprolactone) (PCL) with varied PCL arm lengths have been synthesized via the sequential preparation of different generation terminal dendronized PEG and ring‐opening polymerization of ε‐caprolactone. The copolymers were characterized using Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopy and gel permeation chromatography. Differential scanning calorimetry was performed to measure the glass transition temperature, melting point and degree of crystallinity and the PEG segment and PCL segment crystallization temperatures. The crystallization of the copolymers was also studied using X‐ray diffraction. The dumbbell‐shaped copolymers were further used to construct microspheres using a double emulsion method. Scanning electron microscopy and dynamic light scattering results showed the size of the microspheres was about 2 to 4 µm and the size distribution was quite narrow. Copyright © 2012 Society of Chemical Industry     

Synthesis and aggregation behavior of four types of different shaped PCL‐PEG block copolymers

Biodegradable, amphiphilic, linear (diblock and triblock) and star‐shaped (three‐armed and four‐armed) poly[(ethylene glycol)‐block‐(ε‐caprolactone)] copolymers (PEG–PCL copolymers) were synthesized by ring‐opening polymerization of ε‐caprolactone (CL) with stannous octoate as a catalyst, in the presence of monomethoxypoly(ethylene glycol) (MPEG), poly(ethylene glycol) (PEG), three‐armed poly(ethylene glycol) (3‐arm PEG) or four‐armed poly(ethylene glycol) (4‐arm PEG) as an initiator, respectively. The monomer‐to‐initiator ratio was varied to obtain copolymers with various PEG weight fractions in a range 66–86%. The molecular structure and crystallinity of the copolymers, and their aggregation behavior in the aqueous phase, were investigated by employing ¹H‐NMR spectroscopy, gel permeation chromatography and differential scanning calorimetry, as well as utilizing the observational data of gel–sol transitions and aggregates in aqueous solutions. The aggregates of the PEG–PCL block copolymers were prepared by directly dissolving them in water or by employing precipitation/solvent evaporation technique. The enthalpy of fusion (ΔH_m), enthalpy of crystallization (ΔH_crys) and degrees of crystallinity (χ_c) of PEG blocks in copolymers and the copolymer aggregates in aqueous solutions were influenced by their PEG weight fractions and molecular architecture. The gel–sol transition properties of the PEG–PCL block copolymers were related to their concentrations, composition and molecular architecture. Copyright © 2006 Society of Chemical Industry     

Synthesis of biodegradable and biocompatible ABC triblock copolymers

A facile approach is offered to synthesize well‐defined amphiphilic ABC triblock copolymers composed of poly(ethylene glycol) monomethyl ether (MPEO) as A block, poly(L ‐lysine) (PLLys) as B block, and poly(ε‐caprolactone) (PCL) as C block by a combination of ring‐opening polymerization (ROP) and click reactions. The propargyl‐terminated poly(Z‐L ‐lysine)‐block‐poly(ε‐caprolactone) (MPEO‐PzLLys‐PCL) diblock copolymers were synthesized via the ring‐opening polymerization of N^ε‐carbobenzoxy‐L ‐lysine N‐carboxyanhydride (Z‐L ‐Lys NCA) in DMF at room temperature using propargyl amine as an initiator and the resulting amino‐terminated poly(Z‐L ‐lysine) then used in situ as a macroinitiator for the polymerization of ε‐caprolactone in the presence of stannous octoate as a catalyst. The triblock copolymers poly(ethylene glycol) monomethyl ether –block‐poly(Z‐L ‐lysine)‐block‐poly(ε‐caprolactone) (MPEO‐PzLLys‐PCL) were synthesized via the click reaction of the propargyl‐terminated PzLLys‐PCL and azido‐terminated poly(ethylene glycol) monomethyl ether (PEO‐N₃) in the presence of CuBr and 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) catalyst system. After the removal of Z groups of L ‐lysine units, amphiphilic and biocompatible ABC triblock copolymers MPEO‐PLLys‐PCL were obtained. The structural characteristics of these ABC triblock copolymers and corresponding precursors were characterized by NMR, IR, and GPC. These results showed the click reaction was highly effective. Therefore, a facile approach is offered to synthesize amphiphilic and biocompatible ABC triblock copolymers consisting of polyether, polypeptide and polyester. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,characterization, and hydrolytic degradation of biodegradable poly(ether ester)‐urethane copolymers based on ε‐caprolactone and poly(ethylene glycol)

In this article, a new kind of biodegradable poly(ε‐caprolactone)‐poly(ethylene glycol)‐poly(ε‐caprolactone)‐based polyurethane (PCEC‐U) copolymers were successfully synthesized by melt‐polycondensation method from ε‐caprolactone (ε‐CL), poly(ethylene glycol) (PEG), 1,4‐butanediol (BD), and isophorone diisocyanate (IPDI). The obtained copolymers were characterized by ¹H‐nuclear magnetic resonance (¹H‐NMR), FTIR, and gel permeation chromatography (GPC). Thermal properties of PCEC‐U copolymers were studied by DSC and TGA/DTG under nitrogen atmosphere. Water absorption and hydrolytic degradation behavior of these copolymers were also investigated. Hydrolytic degradation behavior was studied by weight loss method. ¹H‐NMR and GPC were also used to characterize the hydrolytic degradation behavior of PCEC‐U copolymers. The molecular weight of PCL block and PEG block in soft segment and the content of hard segment strongly affected the water absorption and hydrolytic degradation behavior of PCEC‐U copolymers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Temperature‐responsiveness and sustained delivery properties of macroporous PEG‐co‐PNIPAAm‐co‐PCL hydrogels

A series of novel thermosensitive macroporous poly (ethylene glycol) (PEG)‐co‐poly(N‐isopropylacrylamide) (PNIPAAm)‐co‐poly (ε‐caprolactone) (PCL) hydrogels were synthesized via in situ free radical polymerization. Poly(ethylene glycol diacrylate) (PEGDAc) and poly(ε‐caprolactone diacrylate) (PCLDAc) were prepared as macrocrosslinkers. All compounds were investigated by Nuclear Magnetic Resonance (NMR) and Fourier transform‐infrared spectroscopy (FT‐IR). Differential Scanning Calorimetry (DSC) results showed the lower critical solution temperatures (LCSTs) of the gels were at around 31°C. The macroporous gels not only had considerable swelling ratios, but also exhibited rapid swelling kinetics and response sensitivity. Above mentioned hydrogels showed a remarkable oscillatory swelling–deswelling transition, making them have potential application in long‐term drug delivery. POLYM. ENG. SCI., 55:223–230, 2015. © 2014 Society of Plastics Engineers     

Biodegradable and photocurable multiblock copolymers with shape‐memory properties from poly(ε‐caprolactone) diol,poly(ethylene glycol), and 5‐cinnamoyloxyisophthalic acid

Biodegradable and photocurable multiblock copolymers of various compositions were synthesized by the high‐temperature solution polycondensation of poly(ε‐caprolactone) (PCL) diols of molecular weight (M_n) = 3000 and poly(ethylene glycol)s (PEG) of M_n = 3000 with a dichloride of 5‐cinnamoyloxyisophthalic acid (ICA) as a chain extender, followed by irradiation by a 400 W high‐pressure mercury lamp (λ > 280 nm) to form a network structure. The gel contents increased with photocuring time, reaching a level of over 90% after 10 min for all copolymers without a photoinitiator. The thermal and mechanical properties of the photocured copolymers were examined by DSC and tensile tests. In cyclic thermomechanical tensile tests, the photocured ICA/PCL/PEG copolymer films showed good shape‐memory properties at 37–60°C, with both shape fixity ratio and shape recovery ratio over 90% at a maximum tensile strain of 100–300%. The water absorption of these copolymers and their rate of degradation in a phosphate buffer solution (pH 7.0) at 37°C increased significantly with increasing PEG content. The novel photocured ICA/PCL/PEG multiblock copolymers are potentially useful in biomedical applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Biodegradable Poly(ε‐Caprolactone)‐Based Graft Copolymers Via Poly(Linoleic Acid): In Vitro Enzymatic Evaluation

Well‐defined graft copolymers based on poly(ε‐caprolactone) (PCL) via poly(linoleic acid) (PLina), are derived from soybean oil. Poly(linoleic acid)‐g‐poly(ε‐caprolactone) (PLina‐g‐PCL) and poly(linoleic acid)‐g‐poly(styrene)‐g‐poly(ε‐caprolactone) (PLina‐g‐PSt‐g‐PCL) were synthesized by ring‐opening polymerization of ε‐caprolactone initiated by PLina and one‐pot synthesis of graft copolymers, and by ring‐opening polymerization and free radical polymerization by using PLina, respectively. PLina‐g‐PCL, PLina‐g‐PSt‐g‐PCL3, and PLina‐g‐PSt‐g‐PCL4 copolymers containing 96.97, 75.04 and 80.34 mol% CL, respectively, have been investigated regarding their enzymatic degradation properties in the presence of Pseudomonas lipase. In terms of weight loss, after 1 month, 51.5 % of PLina‐g‐PCL, 18.8 % of PLina‐g‐PSt‐g‐PCL3, and 38.4 % of PLina‐g‐PSt‐g‐PCL4 were degraded, leaving remaining copolymers with molecular weights of 16,140, 83,220 and 70,600 Da, respectively. Introducing the PLina unit into the copolymers greatly decreased the degradation rate. The molar ratio of [CL]/[Lina] dramatically decreased, from 21.3 to 8.4, after 30 days of incubation. Moreover, reduced PCL content in PLina‐g‐PSt‐g‐PCL copolymers decreased the degradation rate, probably due to the PSt enrichment within the structure, which blocks lipase contact with PCL units. Thus, copolymerization of PCL with PLina and PSt units leads to a controllable degradation profile, which encourages the use of these polymers as promising biomaterials for tissue engineering applications.     

Preparation and characterization of electrospun poly(ε‐caprolactone)–pluronic–poly(ε‐caprolactone)‐based polyurethane nanofibers

In this study, amphiphilic poly(ε‐caprolactone)–pluronic–poly(ε‐caprolactone) (PCL–pluronic–PCL, PCFC) copolymers were synthesized by ring‐opening copolymerization and then reacted with isophorone diisocyanate to form polyurethane (PU) copolymers. The molecular weight of the PU copolymers was measured by gel permeation chromatography, and the chemical structure was analyzed by ¹H‐nuclear magnetic resonance and Fourier transform infrared spectra. Then, the PU copolymers were processed into fibrous scaffolds by the electrospinning technology. The morphology, surface wettability, mechanical strength, and cytotoxicity of the obtained PU fibrous mats were investigated by scanning electron microscopy, water contact angle analysis, tensile test, and MTT analysis. The results show that the molecular weights of PCFC and PU copolymers significantly affected the physicochemical properties of electrospun PU nanofibers. Moreover, their good in vitro biocompatibility showed that the as‐prepared PU nanofibers have great potential for applications in tissue engineering. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43643.     

Miscibility of block copolymers of poly(ε‐caprolactone) and poly(ethylene glycol) with poly(3‐hydroxybutyrate) as well as the compatibilizing effect of these copolymers in blends of poly(ε‐caprolactone) and poly(3‐hydroxybutyrate)

Atactic poly(3‐hydroxybutyrate) (a‐PHB) and block copolymers of poly(ethylene glycol) (PEG) with poly(ε‐caprolactone) (PCL‐b‐PEG) were synthesized through anionic polymerization and coordination polymerization, respectively. As demonstrated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) measurements, both chemosynthesized a‐PHB and biosynthesized isotactic PHB (i‐PHB) are miscible with the PEG segment phase of PCL‐b‐PEGs. However, there is no evidence showing miscibility between both PHBs and the PCL segment phase of the copolymer even though PCL has been block‐copolymerized with PEG. Based on these results, PCL‐b‐PEG was added, as a compatibilizer, to both the PCL/a‐PHB blends and the PCL i‐PHB blends. The blend films were obtained through the evaporation of chloroform solutions of mixed components. Excitingly, the improvement in mechanical properties of PCL/PHB blends was achieved as anticipated initially upon the addition of PCL‐b‐PEG. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2600–2608, 2001     

Preparation of diblock copolymers consisting of methoxy poly(ethylene glycol) and poly(ε‐caprolactone)/poly(L‐lactide) and their degradation property

Methoxy poly(ethylene glycol)‐b‐poly(ε‐caprolactone) (MPEG‐PCL) or MPEG‐b‐poly(L ‐lactide) (MPEG‐PLLA) diblock copolymers were prepared by the polymerization of CL or LA, using MPEG as an initiator in the presence of stannous octoate. MPEG‐b‐poly(ε‐caprolactone‐ran‐L ‐lactide) (MPEG‐PCLA) diblock copolymers with different chemical composition of PCL and PLLA were also prepared by adjusting the amount of CL and LA from MPEG in the presence of stannous octoate. In degradation study, the degradation of the MPEG‐PCLA diblock copolymers mainly depends on the PCL and PLLA segments present in their structure. MPEG‐PCLA, with intermediate ratio of PCL and PLLA segment, completely degraded after 14 weeks. Meanwhile, partially degraded MPEG‐PCLA segments and parent MPEG segments were observed at higher PCL or PLLA segment contents. Introduction of PLLA into the PCL segments caused a lowering of the crystallinity of the diblock copolymers, thus, inducing a faster incoming of water into the copolymers. We confirmed that the diblock copolymers, with lower degree of crystallinity, have degraded more rapidly. POLYM. ENG. SCI., 46: 1242–1249, 2006. © 2006 Society of Plastics Engineers     

Synthesis and characterization of amine‐functionalized amphiphilic block copolymers based on poly(ethylene glycol) and poly(caprolactone)

A series of amine‐functionalized block copolymers, poly(caprolactone)‐block‐poly(ethylene glycol) (PCL‐b‐PEG), were synthesized by ring‐opening bulk polymerization (ROP) of ε‐caprolactone (ε‐CL) initiated through the hydroxyl end of the amino poly(ethylene glycol) (PEG) used as a macroinitiator in the presence of stannous 2‐ethylhexonoate [Sn(Oct)₂]. The polymerization and end functionality of the polymer were studied by different physicochemical techniques (¹H NMR, Fourier transform infrared and X‐ray photoelectron spectroscopy, gel permeation chromatography and thermogravimetric analysis). Thermal, crystalline and mechanical properties of the polymer were thoroughly analyzed using differential scanning calorimetry, wide‐angle X‐ray diffractometry and tensile testing, respectively. The results showed a linear improvement in crystallinity and mechanical properties of the polymer with the content of PEG. Thus the synthesized functional polymers can be used as excellent biomaterials for the delivery of polyanions, as well as macroinitiators for the synthesis of A–B–C‐type block copolymers. Copyright © 2006 Society of Chemical Industry     

Thermoresponsive self‐assembled nanovesicles based on amphiphilic triblock copolymers and their potential applications as smart drug release carriers

A series of thermoresponsive triblock copolymers, methoxy poly(ethylene oxide)‐b‐poly(ε‐caprolactone)‐b‐poly(N‐isopropylacrylamide) (mPEO‐b‐PCL‐b‐PNIPAM), with different PCL and PNIPAM block lengths, were synthesized by a combination of ring opening polymerization and reversible addition‐fragmentation chain transfer polymerization techniques. The triblock copolymers undergo self‐assembly in aqueous solutions forming stable nanovesicles of various sizes with a lipid membrane structure similar to body cells as revealed by transmission electron microscopy. The nanovesicle is thermoresponsive, that is, its size is tunable using the temperature as a switch: shrinks at a temperature above the lower critical solution temperature (LCST) and expands at a temperature below the LCST. The corresponding LCST of the triblock copolymers is adjustable by varying the PNIAM segment length as well as the PCL segment length and covers a range from 33.9 to 41.0°C in water. The diameter of nanovesicles for mPEO_3k‐b‐PCL_5k‐b‐PNIPAM_13.2k is about 177.7 nm below the LCST and 138.9 nm above the LCST, as determined by dynamic light scattering. It was demonstrated using indomethacin, a popular anti‐inflammation medicine, that the triblock copolymers can effectively act as a drug release carrier under the right human physiological conditions, that is, store the drug at a lower temperature and release it at a higher temperature, possibly targeting at the lesion sites of human body. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41361.     

Synthesis and physicochemical characterization of amphiphilic block copolymer self‐aggregates formed by poly(ethylene glycol)‐block‐poly(ϵ‐caprolactone)

Diblock copolymers with different poly(ε‐caprolactone) (PCL) block lengths were synthesized by ring‐opening polymerization of ε‐caprolactone in the presence of monomethoxy poly(ethylene glycol) (mPEG‐OH, MW 2000) as initiator. The self‐aggregation behaviors and microscopic characteristics of the diblock copolymer self‐aggregates, prepared by the diafiltration method, were investigated by using ¹H NMR, dynamic light scattering (DLS), and fluorescence spectroscopy. The PEG–PCL block copolymers formed the self‐aggregate in an aqueous environment by intra‐ and/or intermolecular association between hydrophobic PCL chains. The critical aggregation concentrations of the block copolymer self‐aggregate became lower with increasing hydrophobic PCL block length. On the other hand, reverse trends of mean hydrodynamic diameters were measured by DLS owing to the increasing bulkiness of the hydrophobic chains and hydrophobic interaction between the PCL microdomains. The partition equilibrium constants (K_v) of pyrene, measured by fluorescence spectroscopy, revealed that the inner core hydrophobicity of the nanoparticles increased with increasing PCL chain length. The aggregation number of PCL chain per one hydrophobic microdomain, investigated by the fluorescence quenching method using cetylpyridinium chloride as a quencher, revealed that 4–20 block copolymer chains were needed to form a hydrophobic microdomain, depending on PCL block length. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3520–3527, 2006     

A convenient scheme for synthesizing reduction‐sensitive chitosan‐based amphiphilic copolymers for drug delivery

A novel type of reduction‐sensitive graft copolymers, chitosan‐S‐S‐poly(ε‐caprolactone) (CS‐S‐S‐PCL, here ‐S‐S‐ means PCL was conjugated onto chitosan backbone through disulfide linkage), was synthesized through a convenient route using dithiodipropionic anhydride (DTDPA) as a disulfide donor. Reaction of hydroxy‐terminated poly(ε‐caprolactone) (PCL) with DTDPA quantitatively yielded DTDPA functionalized PCL (PCL‐S‐S‐COOH). The disulfide‐containing polyester was regioselectively conjugated onto the hydroxy groups of chitosan under mild and homogeneous conditions, utilizing dodecyl sulfate‐chitosan complexes (SCC) as an intermediate. The self‐assembly and Doxorubicin (Dox) release behavior of the copolymers were investigated. Spherical micelles could be formed through self‐assembly of CS‐S‐S‐PCL in aqueous media. The reduction‐sensitive behavior of CS‐S‐S‐PCL micelles was investigated by using Dithiothreitol (DTT) as a reductive reagent. In the presence of 10 mM DTT, the micelles gradually lost their aggregation stability and were precipitated out after four days. In addition, the Dox release was accelerated when the micelles were treated with DTT. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of poly(p‐phenylene)‐graft‐poly(ε‐caprolactone) copolymers by combined ring‐opening polymerization and cross‐coupling processes

2,5‐Dibromo‐1,4‐(dihydroxymethyl)benzene was used as initiator in ring‐opening polymerization of ε‐caprolactone in the presence of stannous octoate (Sn(Oct)₂) catalyst. The resulting poly(ε‐caprolactone) (PCL) macromonomer, with a central 2,5‐dibromo‐1,4‐diphenylene group, was used in combination with 1,4‐dibromo‐2,5‐dimethylbenzene for a Suzuki coupling in the presence of Pd(PPh₃)₄ as catalyst or using the system NiCl₂/bpy/PPh₃/Zn for a Yamamoto‐type polymerization. The poly(p‐phenylenes) (PPP) obtained, with PCL side chains, have solubility properties similar to those of the starting macromonomer, ie soluble in common organic solvents at room temperature. The new polymers were characterized by ¹H and ¹³C NMR and UV spectroscopy and also by GPC measurements. The thermal behaviour of the precursor PCL macromonomer and the final poly(p‐phenylene)‐graft‐poly(ε‐caprolactone) copolymers were investigated by thermogravimetric analysis and differential scanning calorimetry analyses and compared. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of polyrotaxanes comprising α‐cyclodextrins and poly(ε‐caprolactone) end‐capped with poly(butyl methacrylate)s

Biodegradable polyrotaxane‐based triblock copolymers were synthesized via the bulk atom transfer radical polymerization (ATRP) of n‐butyl methacrylate (BMA) initiated with polypseudo‐rotaxanes (PPRs) built from a distal 2‐bromoisobutyryl end‐capped poly(ε‐caprolactone) (Br‐PCL‐Br) with α‐cyclodextrins (α‐CDs) in the presence of Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 45 ºC. The structure was characterized in detail by means of ¹H NMR, gel permeation chromatography, wide‐angle X‐ray diffraction, DSC and TGA. When the feed molar ratio of BMA to Br‐PCL‐Br was changed from 128 to 300, the degree of polymerization of PBMA blocks attached to two ends of the PPRs was in the range 382 ? 803. Although about a tenth of the added α‐CDs were still threaded onto the PCL chain after the ATRP process, the movable α‐CDs made a marked contribution to the mechanical strength enhancement, blood anticoagulation activity and protein adsorption repellency of the resulting copolymers. Meanwhile, they could also protect the copolymers from the attack of H₂O and Lipase AK Amano molecules, exhibiting a lower mass loss as evidenced in hydrolytic and enzymatic degradation experiments. © 2013 Society of Chemical Industry     

Synthesis,crystallinity and degradation properties of biodegradable poly[(sebacic anhydride)‐co‐caprolactone] triblock copolymers

BACKGROUND: A series of novel biodegradable poly[(sebacic anhydride)‐co‐caprolactone] (PSA‐co‐PCL) triblock copolymers were prepared by melt condensation of acylated PSA and monofunctional hydroxyl‐terminated PCL prepolymers. These copolymers could be used as novel drug delivery carriers with expected good drug permeability due to the PCL component. The degradation rate and mode can be modulated by varying the ratio of monomers in the copolymer. RESULTS: The homopolymers and copolymers were characterized using ¹H NMR, gel permeation chromatography and differential scanning calorimetry (DSC). ¹H NMR confirmed the formation of triblock copolymers that comprise a middle PSA block and two side PCL blocks. DSC revealed that the melting temperature and degree of crystallinity for both sebacic anhydride (SA) and caprolactone (CL) components are strongly composition dependent, implying the hindrance effect of the two components on the crystallinity. In vitro degradation experiments showed that the mass loss is significantly accelerated for samples in base buffer solution and more rapid for the copolymers with a higher SA content. Scanning electron microscopy revealed that for SA‐rich copolymer, PSA(80 wt%)‐co‐PCL, surface erosion dominated the degradation mode of the sample. In contrast, for CL‐rich copolymer, PSA(20 wt%)‐co‐PCL, a micropore structure developed at a degradation time of 155 h along the edges of the sample, owing to the hydrolysis of SA. CONCLUSION: It is concluded that the rate and mode of degradation of these copolymers can be tuned by varying the composition of the copolymers. Copyright © 2007 Society of Chemical Industry