Direct Synthesis of Dimethyl Carbonate from Methanol and Carbon Dioxide over Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>/Ce<Subscript>0.6</Subscript>Zr<Subscript>0.4</Subscript>O<Subscript>2</Subscript> Catalysts: Effect of Acidity and Basicity of the Catalysts

Abstract  

Ce _X Zr_1−X O₂ catalysts with different cerium content (X) (X = 0, 0.2, 0.4, 0.5, 0.6, 0.8, and 1.0) were prepared by a sol–gel method for use in the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. Among these catalysts, Ce_0.6Zr_0.4O₂ was found to show the best catalytic performance. In order to enhance the acidity and basicity of Ce_0.6Zr_0.4O₂ catalyst, Ga₂O₃ was supported on Ce_0.6Zr_0.4O₂ (XGa₂O₃/Ce_0.6Zr_0.4O₂ (X = 1, 5, 10, and 15)) by an incipient wetness impregnation method with a variation of Ga₂O₃ content (X, wt%). Effect of acidity and basicity of Ga₂O₃/Ce_0.6Zr_0.4O₂ on the catalytic performance in the direct synthesis of dimethyl carbonate was investigated using NH₃-TPD and CO₂-TPD experiments. Experimental results revealed that both acidity and basicity of the catalysts played a key role in determining the catalytic performance in the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. Large acidity and basicity of the catalyst facilitated the formation of dimethyl carbonate. The amount of dimethyl carbonate produced over XGa₂O₃/Ce_0.6Zr_0.4O₂ catalysts increased with increasing both acidity and basicity of the catalysts. Among the catalysts tested, 5Ga₂O₃/Ce_0.6Zr_0.4O₂, which retained the largest acidity and basicity, showed the best catalytic performance in the direct synthesis of dimethyl carbonate from methanol and carbon dioxide.     

Design of Efficient Ce<Subscript>x</Subscript>M<Subscript>1−x</Subscript>O<Subscript>2−δ</Subscript> (M = Zr,Hf, Tb and Pr) Nanosized Model Solid Solutions for CO Oxidation

Abstract  

Nanosized Ce_xM_1−xO_2−δ (M = Zr, Hf, Tb and Pr) solid solutions were prepared by a modified coprecipitation method and thermally treated at different temperatures from 773 to 1073 K in order to ascertain the thermal behavior. The structural and textural properties of the synthesized samples were investigated by means of X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), BET surface area, X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy (RS) techniques. The catalytic efficiency has been performed towards oxygen storage/release capacity (OSC) and CO oxidation activity. The characterization results indicated that the obtained solid solutions exhibit defective cubic fluorite structure. The solid solutions of ceria–hafnia, ceria–terbia and ceria–praseodymium exhibited good thermal stability up to 1073 K. A new Ce_0.6Zr_0.4O₂ phase along with Ce_0.75Zr_0.25O₂ was observed in the case of ceria–zirconia solid solution due to more Zr⁴⁺ incorporation in the ceria lattice at higher calcination temperatures. The reducibility of ceria has been increased upon doping with Zr⁴⁺, Hf⁴⁺, Tb^3+/4+ and Pr^3+/4+ cations. This enhancement is more in case of Hf⁴⁺ doped ceria. Among various solid solutions investigated, the ceria–hafnia combination exhibited better OSC and CO oxidation activity. The high efficiency of Ce–Hf solid solution was correlated with its superior bulk oxygen mobility and other physicochemical characteristics.     

Catalytic combustion of volatile aromatic compounds over CuO-CeO<Subscript>2</Subscript> catalyst

Ce_1?x Cu _x O₂ oxide solid solution catalysts with different Ce/Cu mole ratios were synthesized by the one-pot complex method. The prepared Ce_1?x Cu _x O₂ catalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and H₂ temperature-programmed reduction (H₂-TPR). Their catalytic properties were also investigated by catalytic combustion of phenyl volatile organic compounds (PVOCs: benzene, toluene, xylene, and ethylbenzene) in air. XRD analysis confirmed that the CuO species can fully dissolve into the CeO₂ lattice to form CeCu oxide solid solutions. XPS and H²-TPR results indicated that the prepared Ce_1?x Cu _x O₂ catalysts contain abundant reactive oxygen species and superior reducibility. Furthermore, the physicochemical properties of the prepared Ce_1?x Cu _x O₂ catalysts are affected by the Ce/Cu mole ratio. The CeCu₃ catalyst with Ce/Cu mole ratio of 3.0 contains abundant reactive oxygen species and exhibits superior catalytic combustion activity of PVOCs. Moreover, the ignitability of PVOCs is also affected by the respective physicochemical properties. The catalytic combustion conversions of ethylbenzene, xylene, toluene, and benzene are 99%, 98.9%, 94.3%, and 62.8% at 205, 220, 225, and 225 °C, respectively.     

Direct synthesis of dimethyl carbonate from methanol and carbon dioxide over transition metal oxide/Ce<Subscript>0.6</Subscript>Zr<Subscript>0.4</Subscript>O<Subscript>2</Subscript> catalysts: Effect of acidity and basicity of the catalysts

Ce _X Zr_1−X O₂ catalysts with different cerium content (X) (X=0, 0.2, 0.4, 0.5, 0.6, 0.8, and 1.0) were prepared by a sol-gel method. Among these catalysts, Ce_0.6Zr_0.4O₂ showed the best catalytic performance in the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. To see the effect of acidity and basicity of transition metal oxide/Ce_0.6Zr_0.4O₂ catalysts on the catalytic performance in the direct synthesis of dimethyl carbonate, MO/Ce_0.6Zr_0.4O₂ (MO=Ga₂O₃, La₂O₃, Ni₂O₃, Fe₂O₃, Y₂O₃, Co₃O₄, and Al₂O₃) catalysts were prepared by an incipient wetness impregnation method. NH₃-TPD and CO₂-TPD experiments were carried out to measure acidity and basicity of the supported catalysts, respectively. Experimental results revealed that both acidity and basicity of the catalysts played a key role in determining the catalytic performance in the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. The amount of dimethyl carbonate produced over MO/Ce_0.6Zr_0.4O₂ catalysts increased with increasing both acidity and basicity of the catalysts. Among the catalysts tested, Ga₂O₃/Ce_0.6Zr_0.4O₂, which had the largest acidity and basicity, exhibited the best catalytic performance in the direct synthesis of dimethyl carbonate from methanol and carbon dioxide.     

Crystallization Behavior of Amorphous Zr<Subscript>55</Subscript>Cu<Subscript>20</Subscript>Ni<Subscript>10</Subscript>Al<Subscript>10</Subscript>Ti<Subscript>5</Subscript> Alloy

In the present study, the crystallization behavior and thermal stability of amorphous Zr₅₅Cu₂₀Ni₁₀Al₁₀Ti₅ alloy, obtained by melt-spinning, have been investigated using X-ray diffraction (XRD), differential thermal analysis (DTA) and transmission electron microscopy (TEM). The activation energy for crystallization has been evaluated by the Kissinger method, and it has been found that E _x obtained from the crystallization onset temperature (T _x) is lower than E _p determined by the crystallization peak temperature (T _P). During the continuous annealing process, ZrO and h-Al₃Zr₅ phases firstly precipitate from the amorphous matrix, then Zr₂Ni_0.66O_0.33 phase forms continuously and its relative content increases with increasing annealing temperature. However, no crystalline phases have been observed during the isothermal annealing process at 733 K (below T _x) for 90 min. The atomic clusters can keep the stability state through adjusting the short-range ordering.     

Synthesis of Titanates with a Ramsdellite-Type Tunnel Structure Crystallizing in the Li<Subscript>2</Subscript>O-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> System in Different Gaseous Media

The ramsdellite-type phases crystallizing in the Li₂O-Fe₂O₃-TiO₂ system in the course of synthesis in gaseous media at different oxygen partial pressures are studied. Solid solutions based on the ramsdellite structure with the composition Li₂Ti_3?xFe _x O_{7 ? δ} (0 ≤ x ≤ 0.7) are prepared in an oxidizing medium (P_O2 = 1 atm) for the first time. Analysis of the results obtained by electron paramagnetic resonance and Mossbauer spectroscopy revealed that, in these solid solutions, all iron ions are in the oxidation state Fe⁺³.     

SHS of Y<Subscript>2</Subscript>Ti<Subscript>2</Subscript>O<Subscript>7</Subscript>-based mineral-like ceramics: Influence of green density

Explored was the influence of compacting pressure (P) and green density (ρ) on the properties of Zr-doped mineral-like pyrochlore ceramics Y₂(Ti_{1 – x} Zr _x )₂O₇ (x ≤ 0.3) prepared by SHS method. The optimal ρ values that provide minimal porosity and maximal mechanical strength of synthesized ceramics were found. An increase in ρ was found to decrease combustion temperature and increase pyrochlore lattice parameter a. Green density was also found to affect phase composition of the SHS-produced ceramics under study.     

Preparation and microstructural characterization of (Nd1−xGdx)2(Ce1−xZrx)2O7 solid solutions

(Nd_1−xGd_x)₂(Ce_1−xZr_x)₂O₇ (0 ≤ x ≤ 1.0) powders with an average particle size of 100 nm were synthesized with chemical-coprecipitation and calcination method, and were characterized by X-ray diffractometry and scanning electron microscopy. The sintering behaviour of (Nd_1−xGd_x)₂(Ce_1−xZr_x)₂O₇ powders was studied by pressureless sintering at 1600–1700 °C for 10 h in air. The relative densities of (Nd_1−xGd_x)₂(Ce_1−xZr_x)₂O₇ solid solutions increase with increasing the sintering temperature, and gradually decrease with increasing the content of neodymium and cerium at identical temperature levels. (Nd_1−xGd_x)₂(Ce_1−xZr_x)₂O₇ solid solutions have a single phase of defect fluorite-type structure among all the composition combinations studied. The lattice parameters of (Nd_1−xGd_x)₂(Ce_1−xZr_x)₂O₇ solid solutions agree well with the Vegard's rule.     

Oxychlorination of methane over FeO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/CeO<Subscript>2</Subscript> catalysts

Methane activation through oxychlorination is in the spotlight due to the relatively mild reaction conditions at atmospheric pressure and in the temperature range of 450–550 °C. Although CO₂ is known to exhibit good activity for methane oxychlorination, significant amounts of by-products such as CO₂, CO and carbon deposits are produced during the reaction over CO₂. We investigated the effect of iron in FeO_x/CO₂ catalysts on methane oxychlorination. FeO_x/CO₂ with 3 wt% iron shows the maximum yield at 510 °C with 23% conversion of methane and 65% selectivity of chloromethane. XRD and H₂ TPR results indicate that iron-cerium solid solution was formed, resulting in the production of more easily reduced cerium oxide and the suppression of catalysts sintering during the reaction. Furthermore, the selectivity of by-products decreased more significantly over FeO_x/CO₂ than cerium oxide, which can be attributed to the facilitation of HCl oxidation arising from the enhanced reducibility of the former sample.     

Investigation of a new lead-free Bi<Subscript>0.5</Subscript>(Na<Subscript>0.40</Subscript>K<Subscript>0.10</Subscript>)TiO<Subscript>3</Subscript>-(Ba<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>)TiO<Subscript>3</Subscript> piezoelectric ceramic

Lead-free piezoelectric compositions of the (1-x)Bi_0.5(Na_0.40K_0.10)TiO₃-x(Ba_0.7Sr_0.3)TiO₃ system (when x = 0, 0.05, 0.10, 0.15, and 0.20) were fabricated using a solid-state mixed oxide method and sintered between 1,050°C and 1,175°C for 2 h. The effect of (Ba_0.7Sr_0.3)TiO₃ [BST] content on phase, microstructure, and electrical properties was investigated. The optimum sintering temperature was 1,125°C at which all compositions had densities of at least 98% of their theoretical values. X-ray diffraction patterns that showed tetragonality were increased with the increasing BST. Scanning electron micrographs showed a slight reduction of grain size when BST was added. The addition of BST was also found to improve the dielectric and piezoelectric properties of the BNKT ceramic. A large room-temperature dielectric constant, ε _r (1,609), and piezoelectric coefficient, d ₃₃ (214 pC/N), were obtained at an optimal composition of x = 0.10.     

Synthesis and catalytic properties of nanostructured Me/Mn<Subscript>0.5</Subscript>Ce<Subscript>0.5</Subscript>O<Subscript>2</Subscript> in the oxidation of carbon monoxide

The nanostructured solid solution Mn_0.5Ce_0.5O₂ is synthesized to develop effective noble metal free catalysts for the detoxification of technogenic contaminants. Its chemical and phase compositions and textural characteristics are studied by differential thermal analysis, X-ray diffraction analysis, laser mass spectrometry, and low-temperature nitrogen adsorption. The activity of the solid solution in the oxidation of carbon monoxide is determined by the flow method within a temperature range of 20–300°C at atmospheric pressure, a gas hourly space velocity of 1800 h⁻¹ for the following gas mixture composition, vol %: CO, 3.6; O₂, 8.0; N₂, balance. The activity of Mn_0.5Ce_0.5O₂ is shown to be appreciably higher than the activity of MnO_x and CeO₂, and the temperature of 100% conversion is 92, 120, and 210°C, respectively. Using the solid solution as a support and the technique of impregnation, we synthesize the nanostructured catalysts Cu/Mn_0.5Ce_0.5O₂ and Ag/Mn_0.5Ce_0.5O₂, which manifest high activity in the oxidation of carbon monoxide: the temperature of 100% conversion is 77 and 85°C, respectively. The new catalysts could be of interest for the purification of industrial and motor vehicle wastes.     

Crystallization and thermal transformations in nanocrystals of the YPO<Subscript>4</Subscript>-LuPO<Subscript>4</Subscript>-H<Subscript>2</Subscript>O system

Nanocrystals of yttrium lutetium phosphates of the general formula Y_1?x Lu_xPO₄ · nH₂O are synthesized. The temperature dependence of the nanocrystal size is investigated in the range 200–1100°C. The formation of a series of continuous solid solutions belonging to the tetragonal crystal system is revealed, and the limits of their thermal stability are determined.     

Investigation of the Intrinsic Activity of ZrxCe1−xO2 Mixed Oxides in the CO + NO Reactions: Influence of Pd Incorporation

The intrinsic activity of various Zr _x Ce_1–x O₂ mixed oxides and after a Pd deposition has been investigated in the CO + NO reactions from temperature-programmed experiments performed under stoichiometric conditions. It has been found that the activity of Zr _x Ce_1–x O₂ depends on either the specific surface area or the number of Ce cations and their intrinsic activity, Zr_0.5Ce_0.5O₂ being the most active support. The addition of palladium strongly enhances the catalytic activity of the supports probably due to a synergistic effect between CeO₂ and the metal since the initial activity of palladium-based catalysts is directly related to their Ce content. Such a catalytic enhancement has been explained by a bifunctional mechanism involving active sites probably composed of Pd and ceria. A strong deactivation operates leading to the disappearance of the beneficial effect of ceria. Such a deactivation seems to be dependent on the support composition, Pd supported Zr_0.25Ce_0.75O₂ being the most resistant to deactivation.     

Transport properties of solid electrolytes based on <Emphasis Type="Italic">Me</Emphasis>Sm<Subscript>2</Subscript>S<Subscript>4</Subscript>

The solid-solution regions in the MeSm₂S₄-MeS and MeSm₂S₄-Sm₂S₃ (Me = Ca, Ba) systems are revealed. The average ion, cation, and anion transport number of the synthesized solid electrolytes xSm₂S₃[Ca(Ba)S] · (100 ? x)Ca(Ba)Sm₂S₄ (x = 1?10 mol %) are determined by the electromotive force (emf) method with the use of concentration cells with and without transfer. In the phases under investigation, the ion transfer in the temperature range 673–723 K is provided by sulfide ions (\(t_{S^2 } \) = 1.00±0.02). The diffusion coefficients of S^2? ions in the solid electrolytes are determined by potentiostatic chronoamperometry. A vacancy mechanism of defect formation is proposed. It is demonstrated that the transport characteristics of the solid electrolytes based on the CaSm₂S₄ compound are worse than those of the solid electrolytes based on the BaSm₂S₄ compound.     

Excitation and photoluminescence spectra of solid solutions based on lanthanum indate LaInO<Subscript>3</Subscript> of a perovskite structure doped with Nd<Superscript>3+</Superscript> and Cr<Superscript>3+</Superscript> ions

Using a solid-phase method, single-phase solid solutions of La_1–x Nd _x InO₃ (x = 0.007, 0.02, 0.05), LaIn0.99Cr0.01O3, and La_0.95Nd_0.05In_0.995Cr_0.005O₃ have been obtained and their excitation and photoluminescence (PL) spectra have been studied at room temperature. It is found that the intensity of excitation and PL bands for La_1–x Nd _x InO₃ solid solutions depends on the degree of the substitution of La³⁺ ions by Nd³⁺ ions. A solid solution with 0.02 < x < 0.05 possesses the largest intensity of the PL bands in IR wavelength range of 850–950, 1040–1100, and 1350–1370 nm. It is found that replacing 0.5% of In³⁺ ions in a solid solution of La^0.95Nd^0.05InO₃ by Cr³⁺ ions leads to a substantial increase in the intensity of all the PL bands by exciting with light of the wavelength of λ_exc = 490 nm and a decrease in the intensity of all the PL bands by an excitation with light of the wavelengths of λ_exc = 358, 532, and 585 nm.     

Formation of CuCr<Subscript>2</Subscript>Se<Subscript>4</Subscript> ferromagnetic spinel microcrystals in a chalcogenide glass matrix

Crystals of the CuCr₂Se₄ ferromagnetic spinel and spinel-based solid solutions are shown to form in glass-forming alloys of the Cu₂Se-As₂Se₃-Cr₂Se₃-Se system containing Cr₂Se₃ at a content greater than 0.005 mole fractions. The crystalline phases are identified by the magnetochemical method (from the Curie temperatures) and X-ray diffraction analysis. According to electron microscopy, the crystal sizes are equal to several micrometers. IR irradiation of the samples in a magnetic field leads to an increase in the magnetization. The excess magnetization disappears after the external magnetic field is removed.Original Russian Text Copyright © 2005 by Fizika i Khimiya Stekla, Tveryanovich, Kim, Rusnak, Turkina, Korzinin.     

Preparation of sulfide ceramic materials based on BaSm<Subscript>2</Subscript>S<Subscript>4</Subscript>and CaGd<Subscript>2</Subscript>S<Subscript>4</Subscript> with the use of sol-gel and cryochemical technologies

Solid solutions in the MeLn₂S₄?x (mol %) MeS (Ln₂S₃) (Me = Ca, Ba; Ln = Sm, Gd) systems are prepared. The regions of solid solution formation are determined, the unit cell parameters of the crystal lattice are calculated, the total conductivity is investigated, and the activation energies for electrical conduction are calculated for samples with different prehistories. The electrolytic properties of phases based on calcium and barium thiolanthanates are studied, and the mechanism of defect formation is proposed.     

Free occupying mechanism of simulated tetravalent waste ions in Gd2Zr2O7 and performance evaluation of the waste forms

To extend the practicability of ceramics in immobilizing nuclear waste with fluctuant composition, structural design should be abandoned. The simulated tetravalent actinide waste An⁴⁺ (Ce⁴⁺) was directly doped into prepared Gd₂Zr₂O₇, and the waste forms were synthesized by high-temperature solid-state reaction. It has been shown that the maximum loading of CeO₂ in Gd₂Zr₂O₇ lies between 20 and 30 wt.%, and Ce elements are uniformly distributed in the matrix. Existing in Ce³⁺ and Ce⁴⁺, cerium ions automatically occupied both the Gd and Zr sites in Gd₂Zr₂O₇ according to valence equilibrium. This occupation causes the change of r(A³⁺)/r(B⁴⁺) and eventually leads to the structure transition from pyrochlore to fluorite. In addition, the normalized leaching rate of the sample with 60 wt.% of dopant was about 2.5 × 10⁻⁷ g m⁻² d⁻¹ on the 35th day. In this study, a free occupation of simulated waste ions in ceramics was proposed.     

Electrical properties of lead-free 0.98(Na<Subscript>0.5</Subscript>K<Subscript>0.5</Subscript>)NbO<Subscript>3</Subscript>-0.02Ba(Zr<Subscript>0.52</Subscript>Ti<Subscript>0.48</Subscript>)O<Subscript>3</Subscript> piezoelectric ceramics by optimizing sintering temperature

Lead-free 0.98(Na_0.5K_0.5)NbO₃-0.02Ba(Zr_0.52Ti_0.48)O₃ [0.98NKN-0.02BZT] ceramics were fabricated by the conventional mixed oxide method with sintering temperature at 1,080°C to 1,120°C. The results indicate that the sintering temperature obviously influences the structural and electrical properties of the sample. For the 0.98NKN-0.02BZT ceramics sintered at 1,080°C to 1,120°C, the bulk density increased with increasing sintering temperature and showed a maximum value at a sintering temperature of 1,090°C. The dielectric constant, piezoelectric constant [d ₃₃], electromechanical coupling coefficient [k _p], and remnant polarization [P _r] increased with increasing sintering temperature, which might be related to the increase in the relative density. However, the samples would be deteriorated when they are sintered above the optimum temperature. High piezoelectric properties of d ₃₃ = 217 pC/N, k _p = 41%, dielectric constant = 1,951, and ferroelectric properties of P _r = 10.3 μC/cm² were obtained for the 0.98NKN-0.02BZT ceramics sintered at 1,090°C for 4 h.     

Phase formation of zirconia-based solid solutions synthesized from peroxides

A finely crystalline powder of the tetragonal solid solution based on zirconia with a crystal size of less than 40 nm is synthesized from zirconium and cerium peroxides. The amorphous phase formed as an intermediate product upon decomposition of the peroxides is characterized by structural disordering and involves chemical defects (OH^-, H₂O). Crystallization of (Zr_{1 - x}Ce_x)O₂ solid solutions (x = 0–0.2) and the sequence of phase and structural transformations of precursors upon heating are investigated. It is found that, during heat treatment at temperatures in the range 500–1200°C, recrystallization and growth of grains occur very slowly (from 5 to 60 nm). This makes it possible to obtain nanomaterials for different applications.Original Russian Text Copyright © 2004 by Fizika i Khimiya Stekla, Glushkova, Lapshin, Vershinin, Podzorova, Polikanova.