An asymptotic solution for large Prandtl number free convection

Summary The set of ordinary differential equations governing free convection boundary layer flow past an isothermal semi-infinite vertical flat plate is solved for large Prandtl numbers by means of the method of matched asymptotic expansions. The analysis leads to an expression for heat transfer which contains the Prandtl number explicitly and which is very accurate for sufficiently large values of the Prandtl number. On the other hand the analysis also has qualitative assets. Before choosing the mathematical method of solution, the physical aspects of the large Prandtl number free convection boundary layer are investigated. The mathematical solution serves to enlarge our understanding of the physical implications of a free convection boundary layer in a large Prandtl number fluid.Nomenclature a_ij coefficient defined by - b_ij coefficient defined by F_j()=b_0j+b_1j +b_2j ²+.... - c coefficient defined by equation (3) - c_p specific heat - f non-dimensional stream function of inner expansion (7) - f_n n-th perturbation of f - F non-dimensional stream function of outer expansion (15) - g non-dimensional stream function (1) - ¯g acceleration due to gravity - Gr_x local Grashof number:g(T_w–T)x³/v² - h non-dimensional temperature (2) - k coefficient of heat conduction - Nu_x local Nusselt number: - T temperature - T_w wall-temperature - T ambient temperature - u longitudinal velocity - x co-ordinate measuring distance from the leading edge - y co-ordinate measuring distance normal to the plate Greek symbols coefficient of thermal expansion - _i expansion parameter (21) - expansion parameter (22) - _i expansion parameter (33) - expansion parameter (34) - expansion parameter: ^–1/2 - inner similarity co-ordinate (9) - non-dimensional temperature of inner expansion (8) - _n n-th perturbation of - non-dimensional temperature of outer expansion (16) - _n n-th perturbation of - similarity co-ordinate (3) - kinematic viscosity - outer similarity co-ordinate (17) - density - Prandtl number:c_p/k - stream function     

Phase decomposition of liquid-quenched β-type Ti-Cr alloys

Phase decomposition behaviour of liquid-quenched (bcc) type Ti-Cr alloys was investigated by means of transmission electron microscopy and hardness measurements. It was found that decomposition of to ₁ (Ti-rich, bcc) + ₂ (Ti-lean, bcc) takes place in the intermediate composition range of the Ti-Cr system. This experimental result proves the theoretical prediction made by Menon and Aaronson, but the observed ₁ + ₂ two-phase field expands towards higher temperatures than the predicted binodal line. The coherent ₁ + ₂ two-phase state exhibits the so-called 100 modulated structure and it was concluded that the formation of such a structure is a result of spinodal decomposition of the -phase. We obtained time-temperature-transformation (TTT) diagrams of -type Ti-30, 40 and 50 at % Cr alloys. A typical sequence of structural change is coherent ₁ + ₂ incoherent ₁ + ₂ incoherent ₁ + ₂ + grain boundary precipitates stable state of + TiCr₂ or + TiCr₂. Not all the states in the above sequence appear, depending on alloy composition, liquid-quenching rate and ageing temperature.     

Zero Sound Attenuation Near the Quantum Limit in Normal Liquid 3He Close to the Superfluid Transition

The zero sound attenuation of normal liquid ³He has been studied over a range of temperatures from slightly above the superfluid transition temperature, T _c, to approximately 10mK at the constant pressures of 1 and 5bar. Using longitudinal LiNbO₃ transducers, operating both on and off resonance, the experiment was performed at 15 discrete frequencies located in several broadband frequency windows, including 16–25, 60–70, and 105–111MHz. The results are compared to Landau's prediction for the attenuation of zero sound in the quantum limit, (k _B Tk _B T _F), where ₀(P,T, )= (P) T ²{1+(/2k _B T)²}. Calibration of the received zero sound signals was performed by measuring the temperature dependence of the first sound attenuation from 30 to 800mK at those same frequencies and pressures. The data are compared to previous results.     

The transverse acoustic impedance of dilute solutions of3He in superfluid4He

The transverse acoustic impedanceZ=R–iX of dilute solutions of³He in superfluid⁴He has been measured at a frequency (/2) of 20.5 MHz at temperaturesT from 30 mK to the transition at T. The³He concentrations studied werec=0.014, 0.031, 0.053, 0.060, and 0.092 below 1 K, thoughc decreased slightly near the point. The impedance was found from the temperature dependence of the quality factor and the resonant frequency of anAT-cut quartz crystal resonator immersed in the liquid. Below 1 K,Z is due to the Fermi gas of³He quasiparticles, and in the collisionless limit, 1 ( is a relaxation time),R remains constant whileX goes to zero. Measurements ofR(c, T) andX(c, T) were analyzed to determine the momentum accommodation coefficient (c, T) and (c, T). The relaxation times were in good agreement with previous work, while (c, T) was independent ofc, but increased from 0.29±0.03 below 0.1 K to 1.0±0.1 above 0.8 K. Various mechanisms are suggested to explain this. Between 1.0 and 1.5 K the³He quasiparticles and the thermally excited rotons are in the hydrodynamic region, 1. Values of the total viscosity (c, T) were obtained and analyzed to give the³He gas viscosity and the³He-³He and roton-³He scattering rates, both of which were energy-dependent. The superfluid healing length a was also measured. Near the point we founda=(0.1±0.03)^–2/3 nm, where =1–T/T, proportional to the phase coherence length . Our data are consistent with the hypothesis that _s/T is a universal constant for superfluid dilute solutions, where _s is the superfluid density. Between 1.0 and 1.8 K we found thata(c, T) was comparable to measurements in³He-⁴He films.     

Anisotropic spin diffusion and multiple spin echoes in3He-4He solutions

We propose a ₁-t₁-₂ pulse-NMR experiment to detect the spin-diffusion anisotropy, =D-D, in degenerate spin-polarized³He-⁴He mixtures, where D and dare the transverse and longitudinal spin diffusion coefficients. In such an experiment the nonlinearity of the dynamics produces multiple spin echoes (MSE). At the ³He concentration x₃ 4% the spinrotation parameter vanishes (M 0), so that the nonlinearity of the equations of motion is entirely due to the anisotropy. In this situation, detection of MSE amounts to observation of D. For slight anisotropy, i.e. D/D 0.25, we use a perturbation scheme similiar to that developed by Einzel et al. (in that case, for small M and small demagnetizing field) to calculate the second and third echo heights. For larger anisotropy we numerically calculate the echo heights. We find that for D/D = 0.5 the heights are 2 % of the first echo, and should be detectable. The (₁, ₂) tip-angle dependence of the D echoes is different from that of the M and demagnetization echoes, and furthermore, they occur at right angles to these echoes (in spin space). Thus, even when small spin-rotation and demagnetization effects are present, the ₁-t₁-₂ experiment provides a sensitive means of detecting the anisotropy.     

Synthesis, crystal structure and X-ray powder diffraction data of the phosphor matrix 4SrO·7Al2O3

The white phosphor matrix 4SrO·7Al₂O₃ has been synthesized by firing the appropriate mixture of SrCO₃, Al(OH)₃ and H₃BO₃ in the molar ratios 1:3.5:0.135 at 1300°C for 4–7 h. The crystal structure of 4SrO·7Al₂O₃ has been determined as a orthorhombic Pmma space group with a=24.7451(2)Å, b=8.4735(6)Å, c=4.8808(1)Å, V=1023.41(3)ų, Z=2, and D=3.66 g cm^–3 by the Rietveld analysis. The refinement figures of merit are R_p=8.26, R_wp=11.60, R_bragg=4.44 and s=2.61 for 844 reflections with 2<119.94°. And the corresponding X-ray powder diffraction data are presented for search/match analysis.     

Effect of magnesium content on the stress exponent and effective stress in the steady state creep of Al-Mg alloys

The stress exponent of steady state creep,n, and the internal ( _i) and effective stresses ( _e) have been determined using the strain transient dip test for a series of polycrystalline Al-Mg alloys creep tested at 300° C and compared with previously published data. The internal or dislocation back stress, _i, varied with applied stress,, but was insensitive to magnesium content of the alloy, being represented by the empirical equation _i=1.084 ^1.802. Such an applied stress dependence of _i can be explained by using an equation for _i of the form _i (dislocation density)^1/2 and published values for the stress dependence of dislocation density. Values of the friction stress, _f, derived using the equation _e/=(1–c) (1– _f/), indicate that _f is not dependent on the magnesium content. A constant value of _f can best be rationalized by postulating that the creep dislocation structure is relatively insensitive to the magnesium content of the alloy.On leave from Engineering Materials Department, University of Windsor, Windsor, Ontario N9B 3P4, Canada.     

Heat conduction in a multilayer composite wedge

A new method for analytically solving a problem of steady-state heat conduction for multilayer composite wedge-shaped bodies is suggested based on a generalization of the integral Mellin transform.Notation T temperature - _rr, thermal conductivity coefficients - thickness of composite material layers (1) - N₁(), N ₂ ⁽¹⁾ (), N ₂ ⁽²⁾ () auxiliary local functions from the rapid variable =r/ - m(r, p) auxiliary function entering the core of the generalized integral Mellin transform - ₀ half of the wedge aperture angle Moscow Institute of Chemical Engineering. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 64, No. 4, pp. 487–491, April, 1993.     

Stress relaxation in hot-drawn low density polyethylene

The tensile stress relaxation behaviour of hot-drawn low density polyethylene, (LDPE), has been investigated at room temperature at various draw ratios. The drawing was performed at 85° C. The main result was an increase in relaxation rate in the draw direction, especially at low draw ratios when compared to the relaxation behaviour of the isotropic material. This is attributed to a lowering of the internal stress. The position of the relaxation curves along the log time axis was also changed as a result of the drawing, corresponding to a shift to shorter times. The activation volume, , varied with the initial effective stress ₀ ^* according to ₀ ^* 10kT, where ₀ ^* =₀ — _i, is the difference between the applied initial stress, ₀, and the internal stress _i. This result supports earlier findings relating to similarities in the stress relaxation behaviour of different solids.     

Effect of Gamma Irradiation on the Piezoelectric Properties of K2Sr4Nb10O30–K6Li4Nb10O30 Solid Solutions

The effect of gamma irradiation on the dielectric ( ₃₃/₀, tan) and piezoelectric (d ₃₁, g ₃₁, K _p, Q _m) properties of ₂Sr₄Nb₁₀O₃₀–K₆Li₄Nb₁₀O₃₀ solid solutions (tetragonal tungsten bronze structure) was studied as a function of K₆Li₄Nb₁₀O₃₀ content. The results demonstrate that increasing the gamma dose to 9 × 10⁵ Gy reduces ₃₃/₀ and tan. With increasing Li⁺ content (filling of triangular channels), d ₃₁, g ₃₁, K _p, and Q _m increase. The results are interpreted in terms of the generation of stable defects and effective redistribution of the energy of gamma radiation over the ceramic sample.     

A mixed finite element formulation for shells through a reduced Reissner's principle in elastodynamics

Summary The use of Mixed models based in Reissner's principle in statics has been found to lead to some desirable simplifications in Finite Element formulations, in particular in plates and shells. Reduced formulations of Reissner's principle such as the one used by Prato have proved to be even more successful. In this paper, a reduction similar to that of Prato is attempted on a mixed elastodynamic variational principle by Karnopp.

---

Eine gemischte finite Elemente-Formulierung für Schalen durch ein reduziertes Reissnersches Prinzip der Elastodynamik

Zusammenfassung Die Verwendung von gemischten Modellen basiert auf Reissners Prinzip der Statik führt zu erwünschten Vereinfachungen bei der Formulierung von finiten Elementen im speziellen bei Untersuchungen von Platten und Schalen. Reduzierungen des Reissnerschen Prinzips, wie sie von Prato angewendet worden sind, haben sich sogar als noch erfolgreicher erwiesen. In dieser Untersuchung wird eine Reduktion, ähnlich der von Prato, für ein gemischtes elastodynamisches Variationsprinzip nach Karnopp, vorgenommen.

---

Symbol Table A Domain of integration of the Functional. Also area of the triangle - b Second fundamental form of the shell middle surface - C ^ijkl Elastic Constants - E ₁,E ₁ ^* Strain Energy and Co-Energy density - e _ij Elastic strain tensor - f _i Body force density tensor - I _ks Karnopp's functional, specialized to shells - I _ksc Contracted Karnopp's functional, specialized to shells - i, j, k Index 1, 2, 3 - K ₁,K ₁ ^* Kinetic Energy and Co-Energy density - K ^* Kinetic co-energy density for shell - m Moment tensor defined at the mid-surface - n In-plane stress tensor defined at the middle surface - n Qualifier for the boundary normal - p ,p ³ Boundary forces - Prescribed boundary forces - p Shear force tensor defined at the mid-surface - R Position vector of a point in the volume of the shell - r Position vector of a point on the mid-surface - r _i Net impulse density tensor - S _u Portion of the boundary where displacements are preseribed - S Portion of the boundary where forces are prescribed - s Qualifier for the direction tangent to the boundary - t Time variable - t ^ij Stress tensor - u ,u ₃ Mid-surface displacements - Mid-surface velocities - V Volume - v _i Displacement tensor - , Indices. Range 1, 2 - Shear strain tensor for the middle surface - Variation operator - Mid-surface strain tensor - Mid-surface curvature strain tensor - Direction cosine tensor for boundary normal - Mid-surface rotation tensor - Mid-surface angular velocity tensor - _M Strain energy density - _M * Strain co-energy density - _B * Bending strain co-energy density - _TS ^* Transverse shear strain co-energy density - | Covariant differentiation with respect tox , etc - Partial differentiation with respect tox , etc - .(dot) Time differentiation - -(bar) Prescribed quantities     

A gradient method of defining smooth solutions to inverse boundary-value problems in thermal conduction

An iterative algorithm is described for solving boundary-value inverse problems in thermal conduction by steepest descent, which utilizes information on the smoothness of the solution.Notation A, B linear operators - u element of solution space U - f exact reference data - f reference data uncertainty - value of reference data uncertainty - A^–1 inverse operator - u^(k)() k-th derivative of function u - _m length of observation interval - _i(t) polynomials of degree i–1 - A^*, B^*, L^* operators conjugate to the operators A, B, L - Jg discrepancy functional gradient - _n descent step along the discrepancy antigradient for the n-th iteration - K( –) kernel of integral equation - q() heat flux - T() measured temperature inside body Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 2, pp. 259–263, August, 1980.     

Effect of Gamma Irradiation on the Dielectric Properties of (CH3)2NH2Ga(SO4)2 · 6H2O Crystals in the Vicinity of the Ferroelectric Transition

The effect of gamma irradiation on the dielectric permittivity and loss tangent of (CH₃)₂NH₂Ga(SO₄)₂ · 6H₂O crystals was studied near the ferroelectric transition at different frequencies. Irradiation was found to sharply reduce and tan at gamma doses below 5 × 10⁷ R. At higher doses, and tan level off. With increasing gamma dose, the ferroelectric transition shifts to lower temperatures, irrespective of frequency.     

Line Radiation of Multiply Charged Ions with a Fermi–Dirac Level Distribution of Electrons at High Temperatures

The line radiation of multiply charged ions with a Fermi–Dirac level distribution of electrons is investigated in the plasma temperature range where the motion of electrons may be treated as quasi-classical, and the potential in which they move, as Coulomb, which is valid under the conditions ZE _H max(T, _I ) Z ² E _H, where E _H = 13.6 eV is the ionization energy of hydrogen, Z is the atomic number of the ion being treated, and _I is the frequency of electron reversal in the Coulomb field at an energy equal to the ionization energy. The spectrum and intensity of radiation of ions are calculated. In the limit of high plasma densities, the intensity of radiation per ion turns out to be independent of density and proportional to T ².     

Longitudinal critical current in type II superconductors. I. Helical vortex instability in the bulk

The vortex lattice in type II superconductors is unstable against the growth of helical perturbations if the current along the vortices exceeds a critical value. The longitudinal critical current, the pitch, and the spatially varying amplitude of the elliptically polarized helices are calculated from the London theory at the onset of instability in planar current distributions far from the surface. For weak pinning (_L² c ₆₆) the wavelength and width of the mode extend over the entire specimen, and the critical current is 2H(c ₆₆/c ₁₁)^1/4. For moderate pinning (c _{66 L}² c ₁₁) the wavelength and width are close to Campbell's pinning length (c ₁₁/_L)^1/2, and the critical current times its mean density is 2H ²(_L/c ₁₁)^1/2. For strong pinning (_L² c ₁₁) helical instability occurs at pin-free vortex sections, the helix wavelength is 2.2d, and the critical current density is 0.47Hd/² (H, d, c ₁₁ and c ₆₆), and _L are the magnetic field, spacing, elastic moduli, and pinning parameter of the vortex lattice, and is the magnetic penetration depth).     

Superconducting state in M3C60: Strong vs. weak coupling

The superconducting state in the doped fullerenes is due to strong coupling (e.g.,2.1 for Rb₃C₆₀) to low-frequency intramolecular modes _L 250 cm^–1 (^21/2). The analysis is based on an equation describingT _c for any strength of the coupling and on recent isotope effect and NMR data.     

A new parameter for describing the structure bifurcation in two-phase alloys containing coherent particles

The so-called bifurcation diagrams for precipitate particles in nickel-based alloys were obtained by calculating the energy state for a pair of particles on the basis of the bifurcation theory. Based on the bifurcation diagrams, we have proposed a new parameter for describing the two-phase structure containing coherent particles. The parameter is defined as the mean particle radius at the intersection of the energy ridge and the line ofR=–0.5 orR=0.5 in the bifurcation diagram (R(r –r )/(r +r ), wherer andr are the radii of and ), and is symbolized by¯r ^* _±0.5. Because the energy state of the paired and is maximum at¯r ^* _±0.5 whenR=±0.5,¯r ^* _±0.5 is just like the watershed and hence we have termed it structureshed. This parameter successfully describes the effects of elastic energy as well as surface energy on the microstructural changes during coarsening of precipitate particles.     

Motion of a thermal wave front in a nonlinear medium with absorption

We study the evolution of a thermal perturbation in a nonlinear medium whose thermal conductivity depends on the temperature and the temperature gradient according to a power law.Notation u temperature - k coefficient of thermal conductivity - t time - x spatial variable - x₊ a point on the thermal wave front - a ² generalized coefficient of thermal diffusivity - , , , and s parameters of the process - (x^s) Dirac delta-function - B[, ] a beta function - v(, x), (t) auxiliary functions - A, C, T_o, T_m, T*, R, r, p, and _m constants and parameters Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 4, pp. 728–731, October, 1980.     

Microstructure and mechanical properties of rapidly quenched L20 and L20+L12 alloys in Ni-Al-Fe and Ni-Al-Co systems

Ductile L2₀-type wires and+L1₂-type duplex wires with high strengths and large elongation in the Ni-Al-Fe and Ni-Al-Co ternary systems have been manufactured directly from the liquid state by an in-rotating-water spinning method. The wire diameter was in the range 80 to 180m and the average grain size was 2 to 4m for the wires and 0.2 to 1.0m for the+ wires. _y, _f and _p of the wires were found to be about 360 to 760 MPa, 560 to 960 MPa, and 0.2 to 5.5%, respectively, for the Ni-Al-Fe system, those of the+ wires were about 395 to 660 MPa, 670 to 1285 MPa, and 3.5 to 17%, respectively, for the Ni-Al-Fe system, and about 260 to 365 MPa, 600 to 870 MPa, and 4.0 to 7.0%, respectively, for the Ni-Al-Co system. Cold-drawing caused a significant increase in _y and _f and the values attained were about 1850 and 2500 MPa, respectively, for Ni-20Al-30Fe and Ni-25Al-30Co wires drawn to about 90% reduction in area. The high strengths, large elongation and good cold-workability of the melt-quenched and+ compound wires have been inferred to be due to the structural change into a low-degree ordered state containing a high density of phase boundaries, suppression of grain-boundary segregation and refinement of grain size.     

The influence of biaxiality of loading on the form of caustics in cracked plates

Summary The optical method of reflected caustics was applied up-to-now to problems of cracked plates under uniaxial loading. Only the problem of the biaxial tension of the plate has been considered for the particular case where the crack is transverse to the longitudinal axis of the plate which coincided with the loading axis. In this paper the influence of a biaxial loading of the plate on the form and orientation of the caustic was studied in connection with the orientation of the crack. New modified relations were given for the evaluation of the complex stress intensity factorK=K _I –iK _II in terms of the angle of the angular displacement of the caustic axis. For the accurate evaluation ofK _I andK _II nomograms of correction factors _y ^max , _x ^max and _x ^max were given in terms of the angle of inclination of the crack =(90–) and the biaxiality factork. Experimental evidence with PMMA internally cracked plates corroborated the results of theory.List of Symbols (z), (z) complex-stress function of Muskhelishvili - _xx , _yy , _xy crack tip stress referred to Cartesian coordinate system - r, polar coordinate system centered at crack tip - K _I ,K _II stress intensity factors for ModeI andII loading, respectively - angle of inclination of the crack - 90°- - k ratio of stresses at infinity - ₁, ₂ principal stresses at crack tip - a crack length - stress applied at infinity along the transverse boundaries of the plate - X _r,f ,Y _r,f parametric equations of the reflected caustics referred to the Cartesian systemOXY on the reference screen: (r) reflected caustics from rear face of the specimen and (f) reflected caustics from the front face of the specimen - r ₀ radius of the generatrix curve on the specimen around the crack tip (initial curve) - c _r,f optical constants of the material for reflections from the rear and front faces of the specimen respectively - _m magnification ratio of the optical set-up - z ₀ distance between the reference-screen and the middle plane of the specimen - z _i distance between the focus of the light beam and the middle plane of the specimen - d thickness of specimen - 2 for the reflected caustics from the rear face of the specimen and 1 for the reflected caustics from the front face of the specimen - C _r,f z ₀ dc _r,f / _m (2)^1/2 - v Poisson's ratio - E elastic modulus of the material - A (1+k)+(1–k) cos 2 - B (1–k) sin 2 - C 1+k ²+(1–k ²) cos 2 2 tan^–1 (B/A)=2 tan^–1 (K _II/K_I) - D _y ^max ,D _x ^max ,D _x ^min the maximum and the ninimum diameter of caustics along the axisOy andOx of the crack respectively - _y ^max , _x ^max , _x ^min the correction factors forD _y ^max ,D _x ^max andD _x ^min respectively - D _t ^max ,D _l ^max the maximum transverse and longitudinal diameters of the caustics respectively - _t ^max , _l ^max the correction factors forD _t ^max ,D _l ^max respectively With 13 Figures