共查询到20条相似文献,搜索用时 578 毫秒
1.
为满足从动齿轮运动学特性要求,提出了一种匀变非圆齿轮设计方法.基于匀变非圆齿轮的概念,在速度曲线和加速度曲线的基础上,推导了节曲线方程,建立了齿轮截面长度和中心距的计算模型.以Ⅰ型匀变非圆齿轮为例,提出了匀变非圆齿轮传动的设计方法.利用Adams软件模拟分析了从动齿轮的角速度和角加速度曲线的形状,验证了设计方案的有效性;分析了匀变非圆齿轮传动装置的压力角、根切和啮合系数等特性.结果表明,所提出的设计方法通过改变给定速度曲线和加速度曲线的参数,能够实现节曲线形状的灵活控制. 相似文献
2.
3.
4.
非圆齿轮传统设计方法计算复杂、周期长、效率低下,为了解决这一问题,以AutoCAD为平台、ObjectARX2004为开发工具,在VC 7.0环境下开发了非圆齿轮CAD/CAM系统的节曲线设计模块,实现了由设计者输入参数,快速完成椭圆齿轮、高阶椭圆齿轮、偏心圆齿轮节曲线设计功能,为非圆齿轮CAD/CAM系统的后期工作奠定了基础. 相似文献
5.
6.
为提高非圆齿轮设计效率及规避现有设计方法模型在导入过程中存在的模型信息损失问题,给出一种非圆齿轮副的啮合设计方法。应用椭圆几何学及齿轮啮合基本条件,推导出非圆齿轮的啮合节曲线及齿廓的一般方程,基于MATLAB参数化设计思想和Pro/E三维建模功能,实现了非圆齿轮的三维参数化模型的构建。在MATLAB软件平台下编程对不同阶数和离心率的齿轮副的传动比、角速度、角加速度理论曲线进行描绘。运用Pro/Mechanism design模块进行运动学仿真分析,得到从动齿轮角速度、角加速度与时间的关系曲线。通过对比分析,发现理论曲线与仿真曲线基本一致,验证了给出的非圆齿轮节曲线设计方法的可行性和正确性。 相似文献
7.
非圆齿轮行星轮系是非圆齿轮液压电动机的核心部件,其节曲线设计是整体结构设计的关键.针对4~6阶非圆齿轮行星轮系节曲线的参数不唯一、设计困难等问题,基于4~6阶非圆齿轮行星轮系节曲线的设计方法,选取偏心率作为控制参数,设计出不同非圆齿轮行星轮系的节曲线;对比分析了偏心率对非圆齿轮行星轮系运动特性的影响.结果表明,非圆齿轮行星轮系在传动过程中,行星轮中心加速度和行星轮角加速度均会出现突变,突变的位置均在内齿圈向径最大位置处,且随着节曲线偏心率的增大,行星轮中心加速度和行星轮角加速度的突变值均为增加趋势. 相似文献
8.
9.
非圆齿轮传统设计方法计算复杂、周期长、效率低下,为了解决这一问题,以AutoCAD为平台、ObjectARX2004为开发工具,在VC++7.0环境下开发了非圆齿轮CAD/CAM系统的节曲线设计模块,实现了由设计者输入参数,快速完成椭圆齿轮、高阶椭圆齿轮、偏心圆齿轮节曲线设计功能,为非圆齿轮CAD/CAM系统的后期工作奠定了基础。 相似文献
10.
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
18.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献
19.
20.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献