Crystallization kinetics of poly(1,4‐butylene‐co‐ethylene terephthalate)

The crystallization kinetics of poly(butylene terephthalate) (PBT), poly(ethylene terephthalate) (PET), and their copolymers poly(1,4‐butylene‐co‐ethylene terephthalate) (PBET) containing 70/30, 65/35 and 60/40 molar ratios of 1,4‐butanediol/ethylene glycol were investigated using differential scanning calorimetry (DSC) at crystallization temperatures (T_c) which were 35–90 °C below equilibrium melting temperature . Although these copolymers contain both monomers in high proportion, DSC data revealed for copolymer crystallization behaviour. The reason for such copolymers being able to crystallize could be due to the similar chemical structures of 1,4‐butanediol and ethylene glycol. DSC results for isothermal crystallization revealed that random copolymers had a lower degree of crystallinity and lower crystallite growth rate than those of homopolymers. DSC heating scans, after completion of isothermal crystallization, showed triple melting endotherms for all these polyesters, similar to those of other polymers as reported in the literature. The crystallization isotherms followed the Avrami equation with an exponent n of 2–2.5 for PET and 2.5–3.0 for PBT and PBETs. Analyses of the Lauritzen–Hoffman equation for DSC isothermal crystallization data revealed that PBT and PET had higher growth rate constant G_o, and nucleation constant K_g than those of PBET copolymers. © 2001 Society of Chemical Industry     

On the in‐situ polymerization of cyclic butylene terephthalate oligomers: DSC and rheological studies

The thermal and rheological behaviors of cyclic butylene terephthalate (CBT) were studied with differential scanning calorimetry (DSC) and plate–plate rheometry, respectively. DSC scans were taken at different heating rates. The related first‐heat thermograms indicated crystallization and melting of the resulting poly (butylene terephthalate) (PBT) only at very low heating rate (0.5°C/min). As the crystallization and melting enthalpies were closely matched, one could conclude that the polymerization is essentially athermic. The polymerization was accompanied by a steep increase of the melt viscosity in isothermal rheological tests performed in the temperature range T = 145–210°C. Changes in the viscoelasticity of the polymerizing CBT and crystallizing PBT could be best followed by considering the changes in the phase angle. Viscosity increased with the conversion exponentially in the first approximation. POLYM. ENG. SCI., 46:743–750, 2006. © 2006 Society of Plastics Engineers     

Aggregation structure development and mechanical properties of biodegradable poly(butylene succinate-co-terephthalate) fibers

Biodegradable poly(butylene succinate-co-terephthalate)(PBST) copolyester, with 70 mol % butylene terephthalate (BT), was melt-spun into fibers at various take-up velocities ranging from 2.0 to 4.0 km/min. The structure development and mechanical properties of the as-spun PBST fibers were intensively investigated via birefringence, wide angle X-ray diffraction (WAXD) measurement, tensile test, and cyclic stretch test. With increasing the take-up velocity, the initial tensile modulus and breaking strength of PBST fibers increased, while elongation at break decreased. These were attributed to the increasing degree of orientation and crystallinity, which were resulted from the elevating tension of spinning line at higher take-up velocity. To elucidate the effects of soft butylene succinate (BS) unit on the tensile and elastic properties of PBST fibers, poly(butylene terephthalate) (PBT) fibers were adopted as a comparison sample. The results showed that the combination of soft BS unit and hard BT unit for PBST fibers made contribution to the lower initial modulus, higher elongation at break and better elastic recovery than those of PBT fibers. Moreover, PBST fibers were found to undergo PBT-like crystal form transition from α-form to β-form crystal structure under tension load through the measurement of WAXD. A relatively wider strain region for the crystal transition of PBST fibers also endowed them with higher elastic recoverability than PBT fibers. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Miscibility and crystallization behaviors of biodegradable poly(butylene succinate‐co‐butylene terephthalate)/phenoxy blends

Miscibility and crystallization behaviors of biodegradable poly(butylene succinate‐co‐butylene terephthalate) (PBST)/poly(hydroxyl ether biphenyl A) (phenoxy) blends were investigated with various techniques in this work. PBST and phenoxy are completely miscible as evidenced by the single composition‐dependent glass transition temperature over the entire blend compositions. Nonisothermal melt crystallization peak temperature is higher in neat PBST than in the blends at a given cooling rate. Isothermal melt crystallization kinetics of neat and blended PBST was studied and analyzed by the Avrami equation. The overall crystallization rate of PBST decreases with increasing crystallization temperature and the phenoxy content in the PBST/phenoxy blends; however, the crystallization mechanism of PBST does not change. Moreover, blending with phenoxy does not modify the crystal structure but reduces the crystallinity degree of PBST in the PBST/phenoxy blends. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

The thermal,mechanical and viscoelastic properties of poly(butylene succinate-<Emphasis Type="Italic">co</Emphasis>-terephthalate) (PBST) copolyesters with high content of BT units

Poly(butylene succinate-co-terephthalate) (PBST) copolyesters, with rigid butylene terephthalate (BT) units varying from 50 to 70 mol%, were synthesized via direct esterification route. The chemical structure and comonomer composition were characterized by ¹H NMR. The weight-average molecular weights (M _w ) of the prepared products measured by GPC spanned a range of 1.39 × 10⁵–1.93 × 10⁵ with corresponding M _w /M _n value of 2.23–2.42. Based on the WAXD analysis, PBST copolyesters were identified to have the same crystal structure as that of poly(butylene terephthalate) (PBT). The researches on the thermal properties showed that the melting temperature and decomposed temperature of PBST copolyesters increased with the increasing content of rigid BT units through DSC and TGA measurement. Furthermore, the tensile test results presented that the copolyester with higher content of BT units had higher initial modulus, higher breaking strength but lower elongation at break. Additionally, the viscoelastic properties of the prepared PBST films were analyzed by DMA measurement. It was found that both storage modulus (E′) and loss modulus (E″) corresponding to the peak tended to heighten with the increase of BT units, indicating the copolyester with higher BT units content had the more prominent viscoelasticity. The peak of loss factor (tan δ) curve shifted to higher temperature as the content of rigid BT units increased due to the increasing of the glass transition temperature (T _g).     

聚丁二酸丁二醇-共-对苯二甲酸丁二酯等温结晶性能

利用差示扫描量热仪(DSC)对制备的生物降解性聚丁二酸丁二醇-共-对苯二甲酸丁二醇酯(PBST)的等温结晶性能进行了研究。根据Avrami方程计算发现:PBST共聚酯的Avrami指数n基本上均大于3,表明结晶时聚合物趋向于以球晶形式三维生长。偏光显微镜(POM)直观地证明了这一结果。     

Melting behavior and crystallization kinetics of poly(butylene terephthalate‐co‐diethylene terephthalate) and poly(butylene terephthalate‐co‐triethylene terephthalate) copolyesters

The melting behavior of poly(butylene terephthalate‐co‐diethylene terephthalate) and poly(butylene terephthalate‐co‐triethylene terephthalate) copolymers was investigated by differential scanning calorimetry after isothermal crystallization from the melt. Multiple endotherms were found for all the samples, and attributed to the melting and recrystallization processes. By applying the Hoffman‐Weeks' method, the equilibrium melting temperatures of the copolymers under investigation were obtained. Two distinct peaks in the crystallization exothermic curve were observed for all the samples. Both of them appeared at higher times than that of PBT, indicating that the introduction of a comonomer decreased the crystallization rate. The observed dependence of this latter on composition was explained on the basis of the content of ether–oxygen atoms in diethylene and triethylene terephthalate units, and of the different sizes of these units. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3545–3551, 2001     

Crystallization kinetics,mechanical properties,and hydrolytic degradation of novel eco‐friendly poly(butylene diglycolate) containing ether linkages

The basic thermal properties, isothermal melt crystallization kinetics, spherulitic morphology, mechanical properties, and hydrolytic degradation behavior of a novel eco‐friendly polyester poly(butylene diglycolate) (PBDG) containing ether linkages were systematically studied with several techniques in this research. PBDG is an aliphatic polyester with high thermal stability. It had a glass transition temperature (T_g) of ?25.7 °C, a melting point temperature of 65.1 °C, and an equilibrium melting point of 73.2 °C. During the isothermal melt crystallization, PBDG crystallized slowly with increasing crystallization temperature, but the crystallization mechanism did not change. Negative spherulites were observed for PBDG. The mechanical properties of PBDG were investigated from the tensile testing. As a ductile polyester, PBDG possessed good mechanical properties. PBDG also showed a fast hydrolytic degradation rate. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44186.     

Isothermal crystallization kinetics and melting behaviors of poly(butylene terephthalate) and poly(butylene terephthalate‐co‐fumarate) copolymer

The isothermal crystallization kinetics and melting behaviors after isothermal crystallization of poly(butylene terephthalate) (PBT) and poly(butylene terephthalate‐co‐fumarate) (PBTF) containing 95/5, 90/10, and 80/20 molar ratios of terephthalic acid/fumaric acid were investigated by differential scanning calorimetry. The equilibrium melting temperatures of these polymers were estimated by Hoffman–Weeks equation. So far as the crystallization kinetics was concerned, the Avrami equation was applied and the values of the exponent n for all these polymers are in the range of 2.50–2.96, indicating that the addition of fumarate does not affect the geometric dimension of PBT crystal growth. Crystallization activation energy (ΔE) and nucleation constant (K_g) of PBTF copolymers are higher than that of PBT homopolymer, suggesting that the introduction of fumarate hinders the crystallization of PBT in PBTF. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Crystallization behavior of fully biodegradable poly(lactic acid)/poly(butylene adipate‐co‐terephthalate) blends

Both poly(lactic acid) (PLA) and poly(butylene adipate‐co‐terephthalate) (PBAT) are fully biodegradable polyesters. The disadvantages of poor mechanical properties of PLA limit its wide application. Fully biodegradable polymer blends were prepared by blending PLA with PBAT. Crystallization behavior of neat and blended PLA was investigated by differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and wide angle X‐ray diffraction (WAXD). Experiment results indicated that in comparison with neat PLA, the degree of crystallinity of PLA in various blends all markedly was increased, and the crystallization mechanism almost did not change. The equilibrium melting point of PLA initially decreased with the increase of PBAT content and then increased when PBAT content in the blends was 60 wt % compared to neat PLA. In the case of the isothermal crystallization of neat PLA and its blends at the temperature range of 123–142°C, neat PLA and its blends exhibited bell shape curves for the growth rates, and the maximum crystallization rate of neat PLA and its blends all depended on crystallization temperature and their component. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of bio-based polyesters derived from 1,10-decanediol

Two kinds of bio-based polyesters were synthesized from 1,10-decanediol (DD), dimethyl terephthalate (DMT) or 2,6-naphthalene dicarboxylic acid (NDCA). Chemical structure, thermal properties and crystal structures, tensile properties and rheological properties were investigated. The glass transition temperature and melting temperature of poly(decamethylene 2,6-naphthalate) (PDN) are higher than that of poly(decamethylene terephthalate) (PDT). Differential scanning calorimetry and wide-angle X-ray diffraction results suggested that PDT and PDN were semi-crystalline polymers. Equilibrium melting points of PDT and PDN were 129.5°C and 167.1°C, respectively. Compared with PDT, PDN exhibited the higher tensile strength (36.8 MPa) and lower elongation at break (224%) and the complex viscosity of PDN is more sensitive to temperature and oscillation frequency. Compared with the current available bio-based plastic poly(butylene succinate) (PBS), PDT and PDN exhibit higher melting temperature, faster crystallization rate and comparable tensile properties.     

Effects of size and shape of dispersed poly(butylene terephthalate) on isothermal crystallization kinetics and morphology of poly(lactic acid) blends

The isothermal crystallization kinetics and morphology of the poly(lactic acid) (PLA) blends containing three different sizes of both spherical and fibrous poly(butylene terephthalate) (PBT) domains have been comparatively investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The dynamic DSC measurement reveals that PBT domains significantly increase the degree of crystallinity of the PLA. Furthermore, the Avrami model is employed to evaluate the crystallization kinetics under isothermal conditions and it is found that PBT acts as nucleating agent, leading to a high overall crystallization rate constant k and shortened crystallization half time t_1/2. Furthermore, the crystallization rate of PLA is promoted with the incorporation of PBT with a large specific surface area. The average Avrami index n of all samples lies within the range of 3.3 ? 4.0, suggesting that morphologies of PBT do not affect the nucleation mechanism; however, the depression of equilibrium melting temperature in the blends ascribes the reductions of perfectness and size of the PLA crystallites. Besides, the nucleation of PLA crystallites around PBT fibers is probably faster than those around PBT spheres because the PBT chains oriented at the fiber surface as a result of flow‐induced crystallization during melt stretching may serve as the primary nuclei for PLA chains to drastically crystallize at the fiber surface. POLYM. ENG. SCI., 56:258–268, 2016. © 2015 Society of Plastics Engineers     

Crystallization kinetics and melting behavior of poly[(trimethylene terephthalate)‐co‐(29 mol % ethylene terephthalate)] copolyester

The copolyester was characterized as having 71 mol % trimethylene terephthalate units and 29 mol % ethylene terephthalate units in a random sequence according to the NMR spectra. Differential scanning calorimeter (DSC) was used to investigate the isothermal crystallization kinetics in the temperature range (T_c) from 130 to 170°C. The melting behavior after isothermal crystallization was studied using DSC and temperature‐modulated DSC by varying the T_c, the crystallization time, and the heating rate. The DSC thermograms and wide‐angle X‐ray diffraction patterns reveal that the complex melting behavior involves melting‐recrystallization‐remelting and different lamellar crystals. As the T_c increases, the contribution of recrystallization gradually falls and finally disappears. A Hoffman‐Weeks linear plot yields an equilibrium melting temperature of 198.7°C. The kinetic analysis of the growth rates of spherulites and the change in the morphology from regular to banded spherulites indicate that a regime II→III transition occurs at 148°C. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Evaluation of polyesters from renewable resources as alternatives to the current fossil-based polymers. Phase transitions of poly(butylene 2,5-furan-dicarboxylate)

Poly(butylene 2,5-furan dicarboxylate) (PBF) is an alipharomatic polyester that can be prepared using monomers derived from renewable resources such as 2,5-furan dicarboxylic acid and 1,4-butanediol. In the present work the thermal behavior of PBF was studied. Multiple melting was observed during heating traces of samples isothermally crystallized from the melt using differential scanning calorimetry (DSC). The wide angle X-ray diffraction (WAXD) patterns did not reveal the presence of a second crystal population, or a crystal transition upon heating. DSC study showed that the phenomena are closely related to recrystallization. Temperature modulated DSC (TMDSC) tests indeed evidenced enhanced recrystallization. The equilibrium melting point was estimated to be 184.5 °C using the linear Hoffman–Weeks extrapolation. The heat of fusion of the pure crystalline polymer was found equal to 129 J/g or (27.35 kJ/mol), a little lower than that of PBT. The Lauritzen–Hoffman secondary nucleation theory was used and the surface energy values and the work of chain folding were found to be comparable to those of PBT, but quite lower than those of poly(ethylene terephthalate) (PET). The non-isothermal crystallization on cooling and the cold-crystallization of quenched samples were also studied. Condensed spherulites were observed on isothermal crystallization under large supercoolings by using polarized optical microscopy (POM), while the spherulites turned to ring-banded morphology at higher temperatures. In every case the nucleation density was high.     

Characterization on mixed-crystal structure of poly(butylene terephthalate/succinate/adipate) biodegradable copolymer fibers

Biodegradable poly(butylene terephthalate/succinate/adipate) (PBTSA) pellet, an ideal random copolymer characterized by ¹H solution NMR, was melt-spun into fibers. The crystal structure and physical properties of the as-spun fibers were investigated by WAXD, solid-state ¹³C NMR, DSC and tensile test measurements. Only poly(butylene terephthalate) (PBT)-like diffraction pattern was observed in WAXD; however, two different ¹³C spin-lattice relaxation time (T_1C) components were observed for aliphatic units, in which the longer and the shorter T_1C components correspond to the crystalline and the amorphous domains, respectively. Therefore the crystal structure of PBTSA was concluded to be formed by mixed crystallization of its comonomers. Such crystallization behavior enabled the PBTSA fibers to have well developed PBT-like crystal structure despite of its ideal randomness. Furthermore, due to the introduction of soft segments (BA and BS) into BT crystal lattice, melting temperature of PBTSA fibers (115 °C) was over 100 °C lower than that of PBT.     

Aliphatic–aromatic poly(butylene carbonate‐co‐terephthalate) random copolymers: Synthesis,cocrystallization, and composition‐dependent properties

A series of aliphatic–aromatic poly(carbonate‐co‐ester)s poly(butylene carbonate‐co‐terephthalate)s (PBCTs), with weight‐average molecular weight of 113,000 to 146,000 g/mol, were synthesized from dimethyl carbonate, dimethyl terephthalate, and 1,4‐butanediol via a two‐step polycondensation process using tetrabutyl titanate as the catalyst. The PBCTs, being statistically random copolymers, show a single T_g over the entire composition range. The thermal stability of PBCTs strongly depends on the molar composition. Melting temperatures vary from 113 to 213°C for copolymers with butylene terephthalate (BT) unit content higher than 40 mol %. The copolymers have a eutectic melting point when about 10 mol % BT units are included. Crystal lattice structure shifts from the poly(butylene carbonate) to the poly(butylene terephthalate) type crystal phase with increasing BT unit content. DSC and WAXD results indicate that the PBCT copolymers show isodimorphic cocrystallization. The tensile modulus and strength decrease first and then increase according to copolymer composition. The enzymatic degradation of the PBCT copolymers was also studied. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41952.     

Effect of self‐nucleation on the crystallization of segmented copolymer poly(ether ester)

The effect of self‐nucleation on the nonisothermal and isothermal crystallization behaviors of the segmented copolymer poly(ether ester), based on poly(ethylene glycol) as the soft segment and poly(ethylene terephthalate) as the hard segment was investigated by means of differential scanning calorimetry (DSC) and depolarization polarized light (DPL) techniques, respectively. The results demonstrated that self‐nucleation could enhance the crystallization rate in both cases. The experimental conditions of the self‐nucleation procedure studied by DSC were discussed in detail. The isothermal crystallization was analyzed by the Avrami equation, and the Avrami parameters were dependent on the melting temperature. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 498–504, 2001     

Sequence analysis and fiber properties of a blend of poly(ethylene terephthalate) and poly(ethylene terephthalate‐co‐4,4′‐bibenzoate)

Blends of poly(ethylene terephthalate) (PET) and poly(ethylene terephthalate‐co‐4,4′‐ bibenzoate) (PETBB) are prepared by coextrusion. Analysis by ¹³C‐NMR spectroscopy shows that little transesterification occurs during the blending process. Additional heat treatment of the blend leads to more transesterification and a corresponding increase in the degree of randomness, R. Analysis by differential scanning calorimetry shows that the as‐extruded blend is semicrystalline, unlike PETBB15, a random copolymer with the same composition as the non‐ random blend. Additional heat treatment of the blend leads to a decrease in the melting point, T_m, and an increase in glass transition temperature, T_g. The T_m and T_g of the blend reach minimum and maximum values, respectively, after 15 min at 270°C, at which point the blend has not been fully randomized. The blend has a lower crystallization rate than PET and PETBB55 (a copolymer containing 55 mol % bibenzoate). The PET/PETBB55 (70/30 w/w) blend shows a secondary endothermic peak at 15°C above an isothermal crystallization temperature. The secondary peak was confirmed to be the melting of small and/or imperfect crystals resulting from secondary crystallization. The blend exhibits the crystal structure of PET. Tensile properties of the fibers prepared from the blend are comparable to those of PET fiber, whereas PETBB55 fibers display higher performance. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1793–1803, 2004     

Crystallization behavior of poly(lactic acid)/elastomer blends

Differential Scanning Calorimetry (DSC) was used to evaluate the crystallization behavior of poly(lactic acid) and its blends with elastomer. It has been observed that the cold crystallization temperature of the blends decreased as the weight fraction of elastomer increased as well as the onset temperature of cold crystallization also shifted to lower temperature. In non-isothermal crystallization experiments, the crystallinity of poly(lactic acid) increased with a decrease in the heating and cooling rate. The melt crystallization of poly(lactic acid) appeared in the low cooling rate (1, 5 and 7.5 °C/min). The presence of low elastomer tends also to increase the crystallinity of poly (lactic acid). The DSC thermogram at ramp of 10 °C/min showed the maximum crystallinity of poly(lactic acid) is 36.95% with 20 wt% elastomer contents in blends. In isothermal crystallization, the cold crystallization rate increased with increasing crystallization temperature in the blends. The Avrami analysis showed that the cold crystallization was in two stages process and it was clearly seen at low temperature. The Avrami exponent (n) at first stage was varying from 1.59 to 2 which described a one-dimensional crystallization growth with homogeneous nucleation, whereas at second stage was varying from 2.09 to 2.71 which described the transitional mechanism to three dimensional crystallization growth with heterogeneous nucleation mechanism. The equilibrium melting point of poly(lactic acid) was also evaluated at 176 °C.     

Nonisothermal crystallization kinetics of novel biodegradable poly(butylene succinate-co-2-methyl-1,3-propylene succinate)s

Two novel poly(butylene succinate-co-2-methyl-1,3-propylene succinate)s, PBMPSu 95/5 and PBMPSu 90/10, were characterized as having 6.5 and 10.8 mol% 2-methyl-1,3-propylene succinate (MS) units, respectively, by ¹H NMR. A differential scanning calorimeter (DSC) and a polarized light microscope (PLM) employed to investigate the nonisothermal crystallization of these copolyesters and poly(butylene succinate) (PBSu). Morphology and the isothermal growth rates of spherulites under PLM experiments at three cooling rates of 1, 2.5 and 5 °C/min were monitored and obtained by curve-fitting. These continuous rate data were analyzed with the Lauritzen-Hoffman equation. A transition of regime II→III was found at 96.2, 83.5, and 77.9 °C for PBSu, PBMPSu 95/05, and PBMPSu 90/10, respectively. DSC exothermic curves at five cooling rates of 1, 2.5, 5, 10 and 20 °C/min show that almost all of the nonisothermal crystallization occurred in regime III. DSC data were analyzed using modified Avrami, Ozawa, Mo, Friedman and Vyazovkin equations. All the results of PLM and DSC measurements reveal that incorporation of minor MS units into PBSu markedly inhibits the crystallization of the resulting polymer.