BaFe<Subscript>12</Subscript>O<Subscript>19</Subscript> films produced from BaFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> heterostructures

BaFe₁₂O₁₉ hexaferrite films have been produced on thermally oxidized single-crystal silicon (SiO₂/Si) substrates by sequential ion-beam sputtering of BaFe₂O₄ and α-Fe₂O₃ targets in an argon-oxygen atmosphere. Their crystal structure has been studied, and the origin of the impurity phases forming during heat treatment has been identified. The results show that heat treatment may lead to the formation of eutectic melts. As a result, the hexaferrite films may contain spherulites.     

Variable—Range hopping in Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-K<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript> glasses

The dc conductivity of the glasses in the Fe₂O₃-Bi₂O₃-K₂B₄O₇ system was studied at temperatures between 223 and 393 K. At temperatures from 300 to 223 K, T^–1/4 (T is temperature) dependence of the conductivity was found, however, both Mott variable-range hopping and Greaves intermediate range hopping models are found to be applicable. Mott and Greaves parameters analysis gave the density of states at Fermi level N (E_F) = 3.13 × 10²⁰–21.01 × 10²⁰ and 1.93 × 10²¹–16.39 × 10²¹ cm^–3eV^–1 at 240 K, respectively. The variable-range hopping conduction occurred in the temperature range T = 300–223 K, since W_D was found to be large (W_D = 0.08–0.14 eV for these glasses) and dominated the conduction at T < 300 K.     

System ZnO ⋅ B<Subscript>2</Subscript>O<Subscript>3</Subscript>-CuO ⋅ B<Subscript>2</Subscript>O<Subscript>3</Subscript>

Differential thermal analysis and x-ray diffraction data indicate that the ZnO B₂O₃-CuO B₂O₃ join of the ternary system CuO-B₂O₃-ZnO is pseudobinary, with eutectic phase relations and a liquid-liquid miscibility gap in the composition range 25–35 mol % CuO.Translated from Neorganicheskie Materialy, Vol. 41, No. 3, 2005, pp. 339–340.Original Russian Text Copyright © 2005 by Kasumova, Bananyarly.This revised version was published online in April 2005 with a corrected cover date.This revised version was published online in April 2005 with a corrected cover date.     

Spectroscopic characterisation of local structure in Y<Subscript>2</Subscript>O<Subscript>3</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses doped with gadolinium

Gadolinium doped bismuth borate glasses containing up to 30 mol% Y₂O₃ were prepared by fast melt quenching method. The effect of yttrium on the local order in 3B₂O₃ · Bi₂O₃ and B₂O₃ · Bi₂O₃ glass matrices, particularly on the bismuth sites, was investigated by infrared (IR) spectroscopy and electron paramagnetic resonance (EPR) of Gd³⁺ ions. The IR results show that the local structure is more ordered in the glass system with higher bismuth content and the progressive addition of yttrium increases the local disorder in both bismuth–borate glass matrices. The EPR results indicate that Gd³⁺ ions occupy both bismuth and yttrium sites and reflect the same structural disorder like that suggested by IR results.     

Investigation of solid solution of ZrP<Subscript>2</Subscript>O<Subscript>7</Subscript>–Sr<Subscript>2</Subscript>P<Subscript>2</Subscript>O<Subscript>7</Subscript>

In this study, ZrP₂O₇ was synthesized by the solid state reaction of ZrO₂ and NH₄H₂PO₄ at 900 °C. Then, in set 1; 10, 5, 1, 0.5, 0.1, 0.05, 0.03% previously prepared Sr₂P₂O₇ were doped into ZrP₂O₇, and Sr₂P₂O₇ slightly affect the unit cell parameter of cubic ZrP₂O₇ (a = 8.248(6)–8.233(8) Å). The reverse of this process was also applied to Sr₂P₂O₇ system (set 2). ZrP₂O₇ changes the unit cell parameters of orthorhombic Sr₂P₂O₇ in between a = 8.909(5)–8.877(5) Å, b = 13.163(3)–13.12(1) Å, and c = 5.403(2)–5.386(4) Å. Analysis of the vibrations of the P₂O ₇ ^4? ion and approximate band assignments for IR and Raman spectra are also reported in this work. Some coincidences in infrared and Raman spectra both sets were found and strong P–O–P bands were observed. Surface morphology, EDX analysis, and thermoluminescence properties of both sets were given the first time in this paper.     

Highly Oxygen-Permeable NiV<Subscript>2</Subscript>O<Subscript>6</Subscript>–25 wt % V<Subscript>2</Subscript>O<Subscript>5</Subscript> Molten-Oxide Membrane Material

A NiV₂O₆–25 wt % V₂O₅ molten-oxide material has been prepared and characterized, and its transport properties (electrical conductivity, oxygen ion transport number, and oxygen permeability) have been studied in the temperature range 680–700°C. The results demonstrate that the molten-oxide membrane material obtained possesses high selective oxygen permeability (KO₂ = (2.5–5.6) × 10^–10 mol/(cm s) in the range 680–740°C and \(\frac{{{j_{{O_2}}}}}{{{j_{{N_2}}}}}\) ~ 1500) and can be used in separators for the preparation of extrapure oxygen from air.     

Fabrication of Yb<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–SiO<Subscript>2</Subscript> Optical Fibers with a Perfect Step-Index Profile by the MCVD Process

An all-vapor phase MCVD process has been proposed for the fabrication of fiber preforms with a Yb₂O₃–Al₂O₃–P₂O₅–SiO₂ multicomponent glass core. We have investigated the tubular preform collapse into a rod and demonstrated approaches capable of preventing P₂O₅ losses in the central part of the core during the collapse process. Preforms with a flat, perfect step-index profile have been fabricated.     

The crystallographic orientation relationship between Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> in the composite material Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Al–Mg–Si alloy

The formation mechanism of spinels on Al₂O₃ particles in the Al₂O₃/Al–1.0 mass% Mg₂Si alloy composite material has been investigated by transmission electron microscopy (TEM) in order to determine the crystallographic orientation relationship. A thin sample of the Al₂O₃/Al–Mg–Si alloy composite material was obtained by the FIB method, and the orientation relationship between Al₂O₃ and MgAl₂O₄, which was formed on the surface of Al₂O₃ particles, was discovered by the TEM technique as follows:

Catalytic combustion of methane over Pt and PdO-supported CeO<Subscript>2</Subscript>–ZrO<Subscript>2</Subscript>–Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>/γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

Catalytic combustion of methane was investigated on Pt and PdO-supported CeO₂–ZrO₂–Bi₂O₃/γ-Al₂O₃ catalysts prepared by a wet impregnation method in the presence of polyvinylpyrrolidone. The catalysts were characterized by X-ray fluorescence analysis, X-ray powder diffraction, X-ray photoelectron spectra, transmission electron microscopy, and BET specific surface area measurements. The Pt/CeO₂–ZrO₂–Bi₂O₃/γ-Al₂O₃ and PdO/CeO₂–ZrO₂–Bi₂O₃/γ-Al₂O₃ catalysts were selective for the total oxidation of methane into carbon dioxide and steam, and no by-products such as HCHO, CO, and H₂ were obtained. The catalytic activities of the PdO/CeO₂–ZrO₂–Bi₂O₃/γ-Al₂O₃ catalysts were relatively higher than those of the Pt-supported catalysts, due to the facile re-oxidation of metallic Pd into PdO based on lattice oxygen supplied from the CeO₂–ZrO₂–Bi₂O₃ bulk. A decrease in the calcination temperature during the preparation process was found to be effective in enhancing the specific surface area of the catalysts, whereby particle agglomeration was inhibited. Optimization of the PdO amount and calcination temperature enabled complete oxidation of methane at temperatures as low as 320 °C on the 11.6 wt% PdO/CeO₂–ZrO₂–Bi₂O₃/γ-Al₂O₃ catalyst prepared at 400 °C.     

Angular-Dependent Vortex Pinning Properties of YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7−<Emphasis Type="Italic">δ</Emphasis></Subscript>/Y<Subscript>2</Subscript>O<Subscript>3</Subscript> Quasi-Multilayers

A series of quasi-multilayers of YBa₂Cu₃O_7?δ (YBCO)/Y₂O₃ specifically 70 × (m YBCO/n Y₂O₃) were prepared on SrTiO₃ single crystal using pulsed-laser deposition (PLD) with a controlled deposition pulses of m = 40 and n = 2, 5, and 10 for YBCO and Y₂O₃, respectively. The x-ray diffraction patterns indicate that all the present quasi-multilayers exhibit good c-axis orientation. The angular dependence of critical current density (J _c ) on applied magnetic field directions are systemically measured to study the anisotropic vortex pinning performances for those quasi-multilayers. It is revealed that compared with the pure YBCO films, the quasi-multilayers with n = 2, i.e., a proper constituent pulse of Y₂O₃, exhibits the enhanced vortex pinning abilities in all angles between c-axis orientation and the applied magnetic field direction. As well, such a quasi-multilayer film (n = 2) shows the higher lift factor J _c (Θ)/ J _c (90°) and much better vortex pinning properties at high fields and high temperatures, showing promising potential for coated conductor application.     

Phase equilibria in the system “CaAl<Subscript>2</Subscript>Si<Subscript>3</Subscript>O<Subscript>10</Subscript>”-Na<Subscript>2</Subscript>Al<Subscript>2</Subscript>Si<Subscript>3</Subscript>O<Subscript>10</Subscript>-H<Subscript>2</Subscript>O

The phase equilibria in the “CaAl₂Si₃O₁₀”-Na₂Al₂Si₃O₁₀-H₂O system are analyzed using structural and thermal analysis data, and the ideal gonnardite structure is modeled. The results suggest that, to ensure a better correlation with the structures of the zeolites in this series, a new structural model of the gonnardite-based solid solution must be selected, with the structure rotated through 45° about the c axis in the ab plane.     

Crystallization and microstructural evolution of MgO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript>–La<Subscript>2</Subscript>O<Subscript>3</Subscript> glass-ceramics

Crystallization and microstructure of glasses with the molar compositions 1MgO·1.2Al₂O₃·2.8SiO₂·1.2TiO₂·xLa₂O₃ (x = 0.1 and 0.4) were thermally treated at different temperatures in the range from 950 to 1250 °C and then analyzed by X-ray diffraction and scanning electron microscopy, in combination with energy-dispersive X-ray spectroscopy and electron backscatter diffraction. It was found that the microstructure is first homogeneous with the precipitation of randomly distributed crystals and then indialite domains with embedded perrierite and rutile crystals are formed. For higher temperatures or prolonged times, more domains appear and expand into the bulk of the sample. Finally, the entire sample consists of the indialite domains and the boundaries that are enriched in rutile, perrierite, and magnesium aluminotitanate. Nevertheless, very distinct differences are observed between the samples with different La₂O₃ concentrations. For the sample with x = 0.4, the domains were detected at lower temperatures, while the quantity and size of the domains increase faster due to the promoted precipitation of indialite. For the sample with x = 0.1, in addition to the domain boundaries, secondary boundaries between the “regions” (assemblages of the domains) are observed in a larger length scale. The average size of the crystalline phases found between the “regions” is larger than that typically observed at the domain boundaries. The sizes of the crystals at the boundaries decrease with higher concentrations of La₂O₃, and the crystals (especially perrierite) within the domains become larger, resulting in a more homogeneous microstructure. This results in better dielectric properties, i.e., much higher quality factor for the sample with x = 0.4 in comparison to that with x = 0.1 after heat-treatment at 1150 or 1250 °C.     

Atomistic structure and energetics of interface between Mn-doped γ-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> and MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript>

The interface between an Mn-doped γ-gallium oxide (Ga₂O₃) thin film and an MgAl₂O₄ (001) substrate has been investigated using high-resolution transmission electron microscopy (HRTEM), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), and first-principles calculations. A high-quality Mn-doped γ-Ga₂O₃ film with a defective spinel structure has been epitaxially grown by pulsed laser deposition. The γ-Ga₂O₃ crystal shows an uniform tetragonal distortion with a tetragonality of 1.05 throughout the film thickness of 75 nm. HRTEM and HAADF-STEM observations reveal that the γ-Ga₂O₃ and MgAl₂O₄ crystals form a coherent interface without any interfacial layers or precipitates. The atomistic structure and energies are theoretically evaluated for the interfaces with two types of termination plane, i.e., Mg- and Al₂O₄-termination of MgAl₂O₄. The cation sublattice is found to be continuous for both interfaces despite the defective spinel structure of Mn-doped γ-Ga₂O₃ with some vacant cation sites. The Al₂O₄-termination shows a lower interfacial energy than the Mg-termination under most conditions of the chemical potentials. This behavior is attributed to the energetic preference of the Mn–Al₂O₄ local configuration at the interface.     

Phase equilibria in the La<Subscript>2</Subscript>O<Subscript>3</Subscript>-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>-CoO system at 1100°C

The phase equilibria in the La₂O₃-Ga₂O₃-CoO system have been studied at 1100°C in air, using samples prepared by a standard ceramic processing technique from oxides and by a glycine-nitrate combustion process. The composition ranges and structures of solid solutions in this system have been determined by x-ray powder diffraction: LaGa_1?x Co _x O₃ (0 < x ≤ 0.05), LaCo_1?x Ga _x O₃ (0 < x ≤ 0.10), La₄Ga_2?x Co _x O₉ (0 < x ≤ 0.20), Co_1?x Ga_2+x O₄ (?0.20 ≤ x ≤ 0.05). The unit-cell parameters of the solid solutions vary little with composition, in accordance with the small difference in ionic radius between gallium and cobalt. The 1100°C section through the phase diagram of the La₂O₃-Ga₂O₃-CoO system in air is presented.     

Mechanical and acid-etching properties of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–ZnO–B<Subscript>2</Subscript>O<Subscript>3</Subscript> glass-containing ceramic fillers

The properties of the composite, having a complicated microstructure, are decided by many factors such as those of glass matrix, crystal phases, fillers, and holes. We investigated how the addition of ceramic fillers to the glass matrix affects the mechanical and etching properties of the glass composite by forming new crystal phases. Different amounts of two fillers, ZnO and Al₂O₃, were added to a glass frit consisting of Bi₂O₃–ZnO–B₂O₃. It was sintered at 550 °C for 30 min. Based on the results of this study, the porosity and degree of crystallization of the composites could be controlled by adjusting the content of the ZnO and Al₂O₃ fillers. Therefore, porosity and degree of crystallization formed by the reaction between a glass matrix and fillers influence the mechanical and etching properties of the composite.     

Evaluation of CaO–SiO<Subscript>2</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–Na<Subscript>2</Subscript>O–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> bioglass-ceramics for hyperthermia application

Magnetic bioglass ceramics (MBC) are being considered for use as thermoseeds in hyperthermia treatment of cancer. While the bioactivity in MBCs is attributed to the formation of the bone minerals such as crystalline apatite, wollastonite, etc. in a physiological environment, the magnetic property arises from the magnetite [Fe₃O₄] present in these implant materials. A new set of bioglasses with compositions 41CaO · (52 ? x)SiO₂ · 4P₂O₅  · xFe₂O₃ · 3Na₂O (2 ≤ x ≤ 10 mol% Fe₂O₃) have been prepared by melt quenching method. The as-quenched glasses were then heat treated at 1050°C for 3 h to obtain the glass-ceramics. The structure and microstructure of the samples were characterized using X-ray diffraction and microscopy techniques. X-ray diffraction data revealed the presence of magnetite in the heat treated samples with x ≥ 2 mol% Fe₂O₃. Room temperature magnetic property of the heat treated samples was investigated using a Vibrating Sample Magnetometer. Field scans up to 20 kOe revealed that the glass ceramic samples had a high saturation magnetization and low coercivity. Room temperature hysteresis cycles were also recorded at 500 Oe to ascertain the magnetic properties at clinically amenable field strengths. The area under the magnetic hysteresis loop is a measure of the heat generated by the MBC. The coercivity of the samples is another important factor for hyperthermia applications. The area under the loop increases with an increase in Fe₂O₃ molar concentration and the. coercivity decreases with an increase in Fe₂O₃ molar concentration The evolution of magnetic properties in these MBCs as a function of Fe₂O₃ molar concentration is discussed and correlated with the amount of magnetite present in them.     

Polycrystalline YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7−<Emphasis Type="Italic">δ</Emphasis></Subscript> with Nano-sized Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Inclusions

Series of (YBa₂Cu₃O_7−δ )_1−x (Al₂O₃) _x samples have been prepared using solid state reaction method. Various amount of nano-sized Al₂O₃ particles (∼50 nm) were added with (x=0, 0.005, 0.01, 0.02, and 0.05). The microstructure and the morphology of the polycrystalline samples have been characterized by X-ray diffraction (XRD) and atomic force microscopy (AFM). The magneto-transport properties of these samples were investigated using resistance–temperature (R–T) and current–voltage (I–V) characteristics. All samples showed an orthorhombic structure with a tendency to transformation to tetragonal phase at higher levels of nanoparticles addition. The morphology of the surface of pure samples reveals a considerable number of weak-links, randomly oriented and clean grain boundaries. While in samples with nano inclusions, grain boundaries were filled with nanosized particle and have less number of weak-links. Significant enhancement of the superconducting critical current density J _c in applied magnetic field was observed due to nano Al₂O₃ inclusions. However, further increase in the value of x decreases the transition temperature T _c and the critical current density J _c . These results were interpreted in terms of the flux pinning mechanisms in granular superconducting networks which leads to a better basic understanding of the performance of YBCO system in high applied magnetic fields.     

Enhanced antibacterial performance of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>–Ag and MnFe<Subscript>2</Subscript>O<Subscript>4</Subscript>–Ag nanocomposites

In this work, we have described the antibacterial activities of Fe₃O₄ nanoparticles with different organic parts, including Humic acid (HA), Nicotinic acid (Nico) and Histidine (His), and the antibacterial activity of MnFe₂O₄ nanoparticles coated with PANI and SiO₂ against different bacteria and some standard antibacterial drugs. The present study revealed that the newly fabricated various Fe₃O₄ and MnFe₂O₄ nanocomposites, when combined with some different organic parts, are superiour antibacterial agents. Also, the synthesized nanocomposites can be easily separated from aqueous solution by magnetic filtration without any contamination of the medium.     

High-temperature heat capacity of the oxide compounds in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–V<Subscript>2</Subscript>O<Subscript>5</Subscript> system

The compounds BiVO₄, Bi₄V₂O₁₁, and Bi₁₂V₂O₂₃ have been prepared by solid-state synthesis using stoichiometric mixtures of Bi₂O₃ and V₂O₅. The effect of temperature on the heat capacity of the synthesized bismuth vanadates has been studied by differential scanning calorimetry in the range 350–950 K. The C _p (T) curves have extrema at 531.7 K for BiVO₄ and at 725.2 and 852.8 K for Bi₄V₂O₁₁, which are due to polymorphic transformations of these compounds.     

Growth of bulk β-BaB<Subscript>2</Subscript>O<Subscript>4</Subscript> crystals of high optical quality in the BaB<Subscript>2</Subscript>O<Subscript>4</Subscript>-NaBaBO<Subscript>3</Subscript> system

Phase equilibria along the BaB₂O₄-NaBaBO₃ join of the BaO-B 2 O 3 -Na 2 O system are studied by differential thermal analysis and modified visual thermal analysis. The join is shown to be suitable for growing - BaB₂O₄ crystal of high optical quality.Translated from Neorganicheskie Materialy, Vol. 41, No. 1, 2005, pp. 64–69. Original Russian Text Copyright © 2005 by Kokh, Kononova, Fedorov, Bekker, Kuznetsov.