High‐Performance Partially Aligned Semiconductive Single‐Walled Carbon Nanotube Transistors Achieved with a Parallel Technique

Single‐walled carbon nanotubes (SWNTs) are widely thought to be a strong contender for next‐generation printed electronic transistor materials. However, large‐scale solution‐based parallel assembly of SWNTs to obtain high‐performance transistor devices is challenging. SWNTs have anisotropic properties and, although partial alignment of the nanotubes has been theoretically predicted to achieve optimum transistor device performance, thus far no parallel solution‐based technique can achieve this. Herein a novel solution‐based technique, the immersion‐cum‐shake method, is reported to achieve partially aligned SWNT networks using semiconductive (99% enriched) SWNTs (s‐SWNTs). By immersing an aminosilane‐treated wafer into a solution of nanotubes placed on a rotary shaker, the repetitive flow of the nanotube solution over the wafer surface during the deposition process orients the nanotubes toward the fluid flow direction. By adjusting the nanotube concentration in the solution, the nanotube density of the partially aligned network can be controlled; linear densities ranging from 5 to 45 SWNTs/μm are observed. Through control of the linear SWNT density and channel length, the optimum SWNT‐based field‐effect transistor devices achieve outstanding performance metrics (with an on/off ratio of ~3.2 × 10⁴ and mobility 46.5 cm²/Vs). Atomic force microscopy shows that the partial alignment is uniform over an area of 20 × 20 mm² and confirms that the orientation of the nanotubes is mostly along the fluid flow direction, with a narrow orientation scatter characterized by a full width at half maximum (FWHM) of <15° for all but the densest film, which is 35°. This parallel process is large‐scale applicable and exploits the anisotropic properties of the SWNTs, presenting a viable path forward for industrial adoption of SWNTs in printed, flexible, and large‐area electronics.     

Multifunctional Composites of Ceramics and Single‐Walled Carbon Nanotubes

Polycrystalline ceramic/single‐walled carbon nanotube (SWNT) composites possess unique grain boundaries, containing 1D tortuous SWNTs bundles that form 2D tangled embedded nets. This unprecedented grain‐boundary structure allows tailoring of multifunctional ceramic/SWNTs composites with unique combinations of desirable mechanical (toughness, strength, creep) and transport (electrical, thermal) properties. A brief discussion and analysis of recent developments in these composites are presented.     

Diameter and Density Control of Single‐Walled Carbon Nanotube Forests by Modulating Ostwald Ripening through Decoupling the Catalyst Formation and Growth Processes

A continuous and wide range control of the diameter (1.9?3.2 nm) and density (0.03?0.11 g cm^?3) of single‐walled carbon nanotube (SWNT) forests is demonstrated by decoupling the catalyst formation and SWNT growth processes. Specifically, by managing the catalyst formation temperature and H₂ exposure, the redistribution of the Fe catalyst thin film into nanoparticles is controlled while a fixed growth condition preserved the growth yield. The diameter and density are inversely correlated, where low/high density forests would consist of large/small diameter SWNTs, which is proposed as a general rule for the structural control of SWNT forests. The catalyst formation process is modeled by considering the competing processes, Ostwald ripening, and subsurface diffusion, where the dominant mechanism is found to be Ostwald ripening. Specifically, H₂ exposure increases catalyst surface energy and decreases diameter, while increased temperature leads to increased diffusion on the surface and an increase in diameter.     

Growth of Single‐Walled Carbon Nanotubes from Sharp Metal Tips

The nucleation and growth of single‐walled carbon nanotubes is observed in situ in a transmission electron microscope. Carbon atoms are implanted into catalytically active metal particles by electron‐beam sputtering. The metal particles are then shaped with a focused electron beam. Once the particles have a region of high surface curvature, spontaneous nucleation and growth of single‐walled carbon nanotubes occurs on the metal particles. It is shown that the local solubility of carbon in the metal determines the nucleation of nanotubes. This is confirmed by atomistic computer simulations treating the solubility of carbon in a metal particle as a function of the size of the system.     

Single‐Walled Carbon‐Nanotube Networks on Large‐Area Glass Substrate by the Dip‐Coating Method

Highly uniform and large‐area single‐walled carbon‐nanotube (SWNT) networks are realized by the dip‐coating method, which is based on fundamental fluid‐dynamic phenomena such as capillary condensation and surface tension. The changes in the polarity and hydration properties of the substrate affect the morphology of the SWNT networks and result in nonlinear growth of the networks in the repetitive dip‐coating process. The density and the thickness of the SWNT networks are controlled by processing variables including number of dip coatings, concentration of SWNT colloidal solution, and withdrawal velocity. The networks have uniform sheet resistances and high optical transmittance in the visible wavelength range.     

Structure‐Dependent Mitochondrial Dysfunction and Hypoxia Induced with Single‐Walled Carbon Nanotubes

Cytotoxicity of nanomaterials on living systems is known to be affected by their size, shape, surface chemistry, and other physicochemical properties. Exposure to a well‐characterized subpopulation of specific nanomaterials is therefore desired to reveal more detailed mechanisms. This study develops scalable density gradient ultracentrifugation sorting of highly dispersed single‐walled carbon nanotubes (SWNTs) into four distinct bands based on diameter, aggregation, and structural integrity, with greatly improved efficiency, yield, and reproducibility. With guarantee of high yield and stability of four SWNT fractions, it is possible for the first time, to investigate the structure‐dependent bioeffects of four SWNT fractions. it is possible Among these, singly‐dispersed integral SWNTs show no significant effects on the mitochondrial functions and hypoxia. The aggregated integral SWNTs show more significant effects on the mitochondrial dysfunction and hypoxia compared to the aggregated SWNTs with poor structure integrity. Then, it is found that the aggregated integral SWNTs induced the irregular mitochondria respiratory and pro‐apoptotic proteins activation, while aggregated SWNTs with poor structure integrity greatly enhanced reactive oxygen species (ROS) levels. This work supports the view that control of the distinct structure characteristics of SWNTs helps establish clearer structure‐bioeffect correlation and health risk assessment. It is also hoped that these results can help in the design of nanomaterials with higher efficiency and accuracy in subcellular translocation.