Buckling and postbuckling behaviors of imperfect cylindrical shells subjected to torsion

Buckling and postbuckling behaviors of imperfect cylindrical shell subjected to torsion are investigated. The governing equations are based on the Karman–Donnell-type nonlinear differential equations. A boundary layer theory of shell buckling is applied to obtain the analytic solutions that meet the boundary conditions strictly. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. Numerical results reveal that the current theory gives quite good estimates of the postbuckling paths of cylindrical shells. The effects of the geometric parameters on the buckling and postbuckling behaviors of the cylindrical shells are analyzed. It is confirmed that the postbuckling equilibrium paths of cylindrical shells subjected to torsion are unstable and the relatively shorter shells have higher postbuckling equilibrium paths. Finally, the effects of the initial imperfections on the buckling and postbuckling behaviors of the cylindrical shells are clarified. The illustrated results of the imperfect shells with different initial transverse deflections show that extremely small imperfections do indeed reduce the buckling loads and make the postbuckling equilibrium paths be lower. The buckling and postbuckling of cylindrical shells under torsion exhibit obvious imperfect sensitivity. Furthermore, the effects become greater following with the larger imperfections.     

Buckling and postbuckling behaviour of cylindrical shells under combined external pressure and axial compression

Buckling and postbuckling behaviour of perfect and imperfect cylindrical shells of finite length subject to combined loading of external pressure and axial compression are considered. Based on the boundary layer theory which includes the edge effect in the buckling of shells, a theoretical analysis for the buckling and postbuckling of circular cylindrical shells under combined loading is presented using a singular perturbation technique. Some interaction curves for perfect and imperfect cylindrical shells are given. The analytical results obtained are compared with some experimental data in detail, and it is shown that both agree well. The effects of initial imperfection on the interactive buckling load and postbuckling behaviour of cylindrical shells have also been discussed.     

Postbuckling analysis of stiffened cylindrical shells under combined external pressure and axial compression

A new approach is extended to investigate the buckling and postbuckling behaviour of perfect and imperfect, stringer and ring stiffened cylindrical shells of finite length subject to combined loading of external pressure and axial compression. The formulations are based on a boundary layer theory which includes the edge effect in the postbuckling analysis of a thin shell. The analysis uses a singular perturbation technique to determine the buckling loads and the postbuckling equilibrium paths. Some interaction curves for perfect and imperfect stiffened cylindrical shells are given and compared well with experimental data. The effects of initial imperfection on the interactive buckling load and postbuckling behaviour of stiffened cylindrical shells have also been discussed.     

Recent advances on postbuckling analyses of thin-walled structures: Beams, frames and cylindrical shells

The lateral postbuckling response of thin-walled structures such as bars and frames with members having steel rolled shapes as well as circular cylindrical shells under axial compression is thoroughly reconsidered. More specifically via a simple and very efficient technique it is found that beams with rolled shapes (symmetric or non symmetric) under uniform bending and axial compression exhibit a stable lateral-torsional secondary path with limited margins of postbuckling strength. New findings for the static and dynamic stability of frames with crooked steel members-due to the presence of residual stresses-are also reported. It is comprehensively established that the coupling effect due to initial crookedness and loading eccentricity may have a beneficial effect on the load-carrying capacity of the frames. Moreover, simple mechanical models are proposed for simulating the buckling mechanism of axially compressed circular cylindrical shells. Very recently Bodner and Rubin proposed an 1-DOF mechanical model whose buckling parameters correlated to those of the shells by using an empirical formula based on experimentally observed shell buckling loads. In the present analysis a new 2-DOF model for the static and dynamic buckling of axially compressed circular cylindrical shells, which can include mode coupling, is presented.     

径向荷载作用下功能梯度柱壳非线性后屈曲研究

基于柱壳非线性大变形理论,研究承受径向荷载的功能梯度柱壳的非线性后屈曲性能。依据功能梯度参数,功能梯度材料沿厚度方向的属性有差异。考虑依赖温度的材料属性,比较不同温度的影响。研究了功能梯度参数与空间参数的影响。最后,利用试验结果对理论结果进行修正。     

Postbuckling analysis of cylindrical shells under combined external liquid pressure and axial compression

A postbuckling analysis is presented for a circular cylindrical shell of finite length which is subjected to combined loading of external liquid pressure and axial compression. The formulations are based on a boundary layer theory which includes effects of the nonlinear prebuckling deformation, the nonlinear large deflection in the postbuckling range and the initial geometrical imperfection of shells. The analysis uses a singular perturbation technique to determine interactive buckling loads and postbuckling equilibrium paths. Numerical examples are presented that relate to the performances of perfect and imperfect cylindrical shells. Typical results are presented in dimensionless graphical form.     

Numerical and experimental investigations of the response of aluminum cylinders with a cutout subject to axial compression

Understanding how a cutout influences the load bearing capacity and buckling behavior of a cylindrical shell is critical in the design of structural components used in automobiles, aircrafts, and marine applications. Numerical simulation and analysis of moderately thick and thin unstiffened aluminum cylindrical shells (D/t=45, 450 and L/D=2, 5, 10), having a square cutout, subjected to axial compression were systematically carried out in this paper. The investigation examined the influence of the cutout size, cutout location, and the shell aspect ratio (L/D) on the prebuckling, buckling, and postbuckling responses of the cylindrical shells.An experimental investigation on the moderately thick-walled shells was also carried out. A good correlation was observed between the results obtained from the finite element simulation and the experiments. Furthermore, empirical equations, in the form of a ‘buckling load reduction factor’ were developed using the least square regression method. These simple equations could be used to predict the buckling capacities of several specific types of cylindrical shells with a cutout.     

Postbuckling analysis of circular cylindrical shells under external pressure

The postbuckling behavior of circular cylindrical shells of finite length under uniform external pressure is analysed using the spline finite strip method. A Total Lagrangian formulation on the displacement dependent pressure load in the orthogonal curvilinear reference frame is derived. An improvement for the arc-length iteration method is presented. The postbuckling equilibrium path and the contour map of equal radial deflection computed are in good agreement with the experimental and analytical results reported in Esslinger, M. and Geier, B., Postbuckling Behaviour of Structures, Springer-Verlag, Wien, New York, 1975.     

真空引起的薄壁圆筒屈曲压力预测

研究均匀外压力下初始缺陷对圆柱形薄壳结构屈曲性能的影响。对缩尺薄壁圆筒的外形进行分析以测量壳体表面的几何缺陷。有限元分析时将这些初始缺陷考虑在内,并进行静态几何非线性分析。在实验室进行圆筒的倒塌试验,并将试验结果和有限元分析结果进行比较。结果表明,有限元分析能够准确预测圆筒的破坏坍塌压力和后屈曲模态。     

Dynamic instability of three-layered cylindrical shells containing an FGM interlayer

In this study, the dynamic instability of three-layered cylindrical shells containing a functionally graded (FG) interlayer subjected to static and time dependent periodic axial compressive loads are investigated. The governing relations, modified Donnell type dynamic stability and deformation compatibility equations are derived. The governing equations are reduced Mathieu–Hill equation by using Galerkin׳s method and the expressions for boundaries of unstable regions of three-layered cylindrical shell with an FG interlayer are found. Finally, the effects of variations of volume fractions of FG interlayer and shell characteristics on the magnitudes of boundaries of unstable regions are studied numerically.     

Analysis and optimization of laminated composite circular cylindrical shell subjected to compressive axial and transverse transient dynamic loads

Optimization is one of the important stages in the design process. In this paper the genetic algorithms method is applied for weight and transient dynamic response and two constraints including critical buckling loads and principle strains optimization of laminated composite cylindrical shells. The multi-objective function seeks the minimum structural weight and transient dynamic response. Nine design variables including material properties (fibre and matrix), volume fraction of fibre, fibre orientation and thickness of each layer are considered. In analytical solution, vibration of composite circular cylindrical shells are investigated based on the first-order shear deformation shell theory. The boundary conditions are assumed to be fully simply support. The dynamic response of the composite shells is studied under transverse impulse and axial compressive loads. The modal technique is used to develop the analytical solution of the composite cylindrical shell. The solution for the shell under the given loading conditions can be found using the convolution integrals. An example of simply supported laminated composite cylindrical shells is given to demonstrate the optimality of the solution obtained by the genetic algorithms technique. Results are shown that the weight coefficient of multi-objective function and the type of the constraints have considerable effect on the optimum weight and dynamic response.     

Effects of imperfections of the buckling response of composite shells

The results of an experimental and analytical study of the effects of initial imperfections on the buckling response and failure of unstiffened thin-walled compression-loaded graphite-epoxy cylindrical shells are presented. The shells considered in the study have six different shell-wall laminates two different shell-radius-to-thickness ratios. The shell-wall laminates include four different orthotropic laminates and two different quasi-isotropic laminates. The shell-radius-to-thickness ratios includes shell-radius-to-thickness ratios equal to 100 and 200. The numerical results include the effects of traditional and nontraditional initial imperfections and selected shell parameter uncertainties. The traditional imperfections include the geometric shell-wall mid-surface imperfections that are commonly discussed in the literature on thin shell buckling. The nontraditional imperfections include shell-wall thickness variations, local shell-wall ply-gaps associated with the fabrication process, shell-end geometric imperfections, nonuniform applied end loads, and variations in the boundary conditions including the effects of elastic boundary conditions. The cylinder parameter uncertainties considered include uncertainties in geometric imperfection measurements, lamina fiber volume fraction, fiber and matrix properties, boundary conditions, and applied end load distribution. Results that include the effects of these traditional and nontraditional imperfections and uncertainties on the nonlinear response characteristics, buckling loads and failure of the shells are presented. The analysis procedure includes a nonlinear static analysis that predicts the stable response characteristics of the shells, and a nonlinear transient analysis that predicts the unstable response characteristics. In addition, a common failure analysis is used to predict material failures in the shells.     

Postbuckling analysis of cross-ply laminated cylindrical shell panels under parabolic mechanical edge loading

Postbuckling equilibrium paths of simply supported cross-ply laminated cylindrical shell panels subjected to non-uniform (parabolic) inplane loads are traced in this paper. Love's shell theory with higher order shear deformation theory and von Kármán nonlinear strain–displacement relations are used in the mathematical formulation of the problem. In the first step, the plate membrane problem is solved to evaluate the stress distribution within the prebuckling range as the applied inplane edge load is non-uniform. The governing shell panel postbuckling equations are derived from the principle of minimum total potential energy using the above stress distributions. Adopting multi-term Galerkin's approximation, the governing equations are reduced into a set of non-linear algebraic equations. Newton–Raphson method in conjunction with Riks approach is employed to plot the postbuckling paths through limit points. Numerical results are presented for symmetric (0/90/0) crossply laminated cylindrical shell panels under parabolic inplane load, lateral distributed load and initial imperfections. Limit loads and snap-through behavior of shell panels are studied.     

考虑安装应力的网格结构稳定承载性能试验研究

为研究安装应力对网格结构承载性能的影响,对平面尺寸为7m×12m和5m×12m的两个正交正放四角锥网架进行破坏性试验及有限元分析,结果表明安装应力使网格结构稳定承载力出现较大幅度的降低。对204个平板网架模型和140个双层柱面网壳模型进行参数分析,得到安装应力对稳定承载力的影响系数。采用有限元分析方法研究了38个具有整体失稳可能性的双层球面和双层柱面网壳模型,得到了稳定承载力安全系数K的合理取值范围。结果表明：试验测得的整体变形、刚度和稳定承载力与理想结构存在明显差异;安装应力对稳定承载力的影响系数服从正态分布,平板网架、双层柱面网壳稳定承载力影响系数分别为0.50和0.55;当考虑安装应力初始缺陷,采用Marshall压杆屈曲失稳模型时,建议K取2.0;由于JGJ 7—2010《空间网格结构技术规程》提供的全过程分析方法未考虑杆件初始应力,建议K取3.0。     

均匀剪力作用下无加劲肋的细长曲面板的屈曲和后屈曲性能

研究平面内剪力作用下曲面板的屈曲和后屈曲性能。回顾经典的弹性屈曲分析,通过对几何和材料非线性的分析,模拟了弹塑性后屈曲性能、及曲率参数和长宽比的影响。通过各种不同大小和级别的缺陷的影响分析,研究缺陷敏感度。随着曲率的增大,弹性临界荷载增大,并且产生不稳定屈曲现象,以及使后屈曲承载力储备减少。微小的初始缺陷都会引起较大曲率的曲面板的初始屈曲,但是几乎不会影响板的极限承载力。     

荷载组合作用下弹性柱状壳体后屈曲路径的非标准稳定性

外部压力和扭矩作用下柱状壳体的后屈曲路径是不稳定的,大多通过改变结构的几何形状研究稳定性的影响。运用替代法,在不改变结构形状和尺寸的条件下,对其端部施加附加轴向荷载,从而获得结构的后屈曲路径。分别研究了结构在3种力作用下的稳定性:主动力、被动力以及二者相结合。利用ANSYS11.0对不同荷载组合作用下的弹性壳体进行计算。     

双层圆柱面网壳的地震反应研究

系统地研究了双层圆柱面网壳的竖向和水平地震反应,分析了各结构参数对双层圆柱面网壳地震内力的影响,得出了许多有意义的结论,并给出了该类结构抗震设计的建议.     

Parametric study on buckling behaviour of dented short carbon steel cylindrical shell subjected to uniform axial compression

Generally, thin cylindrical shells are susceptible for geometrical imperfections like non-circularity, non-cylindricity, dents, swellings, etc. All these geometrical imperfections decrease the static buckling strength of thin cylindrical shells, but in this paper only effect of a dent on strength of a short (Lc/Rc∼1, Rc/t=117, 175, 280) cylindrical shell is considered for analysis. The dent is modeled on the FE surface of perfect cylindrical shell for different angles of inclination and sizes at half the height of cylindrical shell. The cylindrical shells with a dent are analyzed using non-linear static buckling analysis. From the results it is found that in case of shorter dents, size and angle of inclination of dents do not have much effect on static buckling strength of thin cylindrical shells, whereas in the case of long dents, size and angle of inclination of dents have significant effect. But both short and long dents reduce the static buckling strength drastically. It is also found that the reduction in buckling strength of thin cylindrical shell with a dent of same size and orientation increases with increase in shell thickness.     

Buckling and postbuckling behavior of unstiffened slender curved plates under uniform shear

Buckling and postbuckling behavior of curved plates under in-plane shear are investigated. After revisiting classic elastic buckling results, the elastoplastic postbuckling behavior and the effects of curvature parameter and aspect ratio are simulated via geometrical and material nonlinear analyses. Imperfection sensitivity is studied for various imperfection shapes and magnitudes. An increase in curvature parameter raises the elastic buckling load, produces unstable buckling and reduces postbuckling reserves. The buckling load and shear capacity are higher in shorter plates. Small initial imperfections are found to have severe effects on the initial buckling load of plates with large curvature parameter, but little effect on ultimate postbuckling capacity.     

Imperfection sensitivity of internally-pressurized torispherical shells

The imperfection sensitivity of torispherical shells subjected to internal pressure was investigated numerically, using the finite element displacement method. Imperfection patterns affine to the first buckling mode at the bifurcation points of the perfect structure were considered. Load-normal displacement curves were obtained for the pre- and postbuckling regions of the perfect computation model and also for imperfect computation models with different imperfection amplitudes. The dependence of the critical pressure and the postbuckling minimum on the imperfection amplitudes was presented graphically. Torispherical shells subjected to internal pressure failed to demonstrate any significant imperfection sensitivity for the imperfection patterns analysed.