首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
双向网格型单层柱面网壳结构不仅外型美观、各构件布置规则,而且质量轻、采光好。但是随着网壳跨度越来越大,整体稳定性问题也日益突出,因此制约了此类网壳结构在实际工程中的应用。为此,针对双向网格型单层柱面网壳结构,提出了一种新型布索方案,即在双向网格面内布置斜拉索提高结构的面内刚度,在双向网格面外通过撑杆布置横、纵拉索提高结构的面外刚度。首先通过对不同跨度网壳结构的弹塑性分析验证拉索的布置效果,并考虑各种参数变化对结构稳定性的影响,论证了此类网壳结构的合理性和实用性。其次,结合模型的静力试验研究了此类索撑柱面网壳结构的稳定性,论证了拉索布置的合理性。结果表明,采用撑杆和拉索的交错布置后,网壳结构的受力更加合理,其承载能力有了大幅度提高。此类索撑网壳结构为缺陷不敏感结构,但是撑杆长度对结构承载能力的影响很大,对于不同跨度的网壳结构,撑杆的最佳长度有所不同,实际工程中要确保撑杆具有最佳长度。  相似文献   

2.
成都双流机场航站楼单层柱面网壳结构的整体稳定性研究   总被引:2,自引:0,他引:2  
采用基于梁 -柱单元的非线性分析程序 ,对成都双流机场航站楼二典型柱面网壳 +支承柱这一整体结构在三种主要组合工况 (竖向对称荷载组合、竖向非对称荷载组合及风荷载组合 )作用下的承载性能进行了全过程追踪分析。结果表明 ,与单纯柱面网壳结构相比 ,柱面网壳 +支承柱这一整体结构的失稳路径单一 ,一般仅发生极值型失稳 ;其弹性极限承载力大大降低 ,几何缺陷敏感性亦有所降低  相似文献   

3.
Wind loading and its effects on single-layer reticulated cylindrical shells   总被引:1,自引:0,他引:1  
In this paper, the wind load distribution as well as its effects on single-layer reticulated cylindrical shells, which are widely used in practice, is investigated. At first, wind pressure distributions on three rigid cylindrical shell models considering different shape ratios are measured simultaneously in a wind tunnel. Some special characteristics of the measured wind pressure, especially its fluctuating component, are discussed. Then, considering the special structural mechanical behaviors, the effects of wind load, especially the fluctuating component, on the limit load-carrying capacity and the stability of the shells are investigated by both equivalent static analysis and dynamic analysis. Suitable methods to get a reasonable estimation of wind load effects in estimating the equivalent static wind load distribution for such shells are investigated. Finally, with comparison analyses using different methods mentioned in this paper, the efficiency of the method in estimating the effective wind load distribution presented by the authors previously for single-layer reticulated spherical shells is demonstrated, and some advices for estimating the wind load distribution on single-layer reticulated cylindrical shells is given for wind-resistant design in practice.  相似文献   

4.
单层柱面网壳结构风振响应分析   总被引:1,自引:1,他引:0  
张建胜  武岳  沈世钊 《工业建筑》2006,36(10):69-71,96
风荷载在大跨度屋盖结构设计中常常起主要甚至决定性作用,这使得该类结构的风荷载及风致动力响应研究日益受到关注与重视。利用随机模拟时程分析方法对三向网格单层柱面网壳结构的风振性能进行了系统的参数分析,探讨了几何参数、气动参数、结构参数等因素对结构风振响应规律的影响,并在此基础上给出了可供单层柱面网壳结构抗风设计参考的风振系数。  相似文献   

5.
介绍了某相贯单层组合加肋拱支网壳结构在竖向荷载及风荷载作用下的整体稳定性。采用有限元软件MIDAS,在两种荷载工况下分别进行了此网壳结构的特征值屈曲、几何非线性屈曲分析,初始缺陷对网壳结构的整体稳定性影响分析。结果表明:网壳结构对初始缺陷较为敏感,初始缺陷会明显降低结构稳定性;不同的荷载工况下,失稳的情况亦不同且网壳结构稳定临界系数随着荷载的增大而降低。  相似文献   

6.
干煤棚网壳结构极限承载能力分析及其合理设计   总被引:3,自引:0,他引:3  
通过对发生局部破坏的干煤棚网壳结构进行极限承载能力分析 ,采用短期荷载组合对受损网壳的极限承载能力进行核算 ,继而得出结构的极限破坏形式。结果表明 ,网壳结构具有较高的安全储备 ,是一种合理的空间结构。同时提出了一些改进壳体结构设计的建议 ,可供设计人员参考  相似文献   

7.
利用通用有限元软件ANSYS参数化设计语言,建立蜂窝型网格(正六边形)的柱面网壳模型。同时,针对单纯的六边形网格柱面网壳由于刚度和稳定性较低,无法在中大跨度网壳结构中使用的问题,借鉴网壳、网架结构中正放四角锥型的腹杆连接形式,提出在每个六边形网格上施加正放六角锥型腹杆的连接形式,从而使每个六边形网格都得到加强。结构分析表明,单元网格得到加强后的六边形网格柱面网壳整体刚度和稳定性都得到很大程度的加强,且由于网格加强的杆件均采用较小的截面以及结构得到加强以后自身承载能力增加所带来的耗钢量的降低,故加强后的结构在保留六边形结构简洁、通透、耗钢量低等优点的前提下,大大提高了六边形网格柱面网壳结构的适用范围。同时,采用参数化设计方法建立的参数化建模程序为进行不同类型、不同几何参数下六边形柱面网壳的受力分析和设计方案比较提供了极大的方便。  相似文献   

8.
网格圆柱扁壳的稳定性   总被引:3,自引:0,他引:3       下载免费PDF全文
本文用将网格壳转化为连续壳的方法建立了网格圆柱扁亮屋盖的稳定平衡微分方程,所得的方程是属于异性圆柱扁壳的方程,并用方法求得简支边界条件的网格圆柱扁壳的临界荷载计算公式。  相似文献   

9.
为研究安装应力对网格结构承载性能的影响,对平面尺寸为7m×12m和5m×12m的两个正交正放四角锥网架进行破坏性试验及有限元分析,结果表明安装应力使网格结构稳定承载力出现较大幅度的降低。对204个平板网架模型和140个双层柱面网壳模型进行参数分析,得到安装应力对稳定承载力的影响系数。采用有限元分析方法研究了38个具有整体失稳可能性的双层球面和双层柱面网壳模型,得到了稳定承载力安全系数K的合理取值范围。结果表明:试验测得的整体变形、刚度和稳定承载力与理想结构存在明显差异;安装应力对稳定承载力的影响系数服从正态分布,平板网架、双层柱面网壳稳定承载力影响系数分别为0.50和0.55;当考虑安装应力初始缺陷,采用Marshall压杆屈曲失稳模型时,建议K取2.0;由于JGJ 7—2010《空间网格结构技术规程》提供的全过程分析方法未考虑杆件初始应力,建议K取3.0。  相似文献   

10.
This paper is concerned with the geometrical optimum design and the aseismic analysis of double-layer reticulated shell structures. The characteristic of free vibration of reticulated shell structures, with respect to geometric parameter, is investigated. The variations of the eigenfrequency of shell structures, with respect to the ratio of height-to-span, span, grid division frequency and thickness of shell, are discussed. The Newmark method is used to calculate the stresses and displacements of the reticulated shell structure under earthquake action. The analysis results show that under a specified span, the eigenfrequency of the structure increases with the increase of the height-to-span ratio and then decreases afterwards. Therefore, there exists an optimum height-to-span ratio resulting in an optimum stiffness at the specified span. The optimum value of the ratio is found to be between 1/3 and 1/4 from the simulation study presented in this paper. At a specified height-to-span ratio, the increase of the value of structural span greatly reduces the eigenfrequency of the structure and then decreases the global stiffness of the structure. At the specified span and the specified height-to-span ratio, the eigenfrequency of the structure has a minor increase with the increase of the thickness and the grid division frequency of the reticulated shell structure. The partial double-layer reticulated shell structures have less stability compared with double-layer reticulated shell structures, but more stability in comparison with single-layer reticulated shell structures. The 1/6 partial double-layer reticulated shell structure has a best performance-to-price ratio. In other words, it has a higher buckling load, with smaller material consumption, compared with other partial double-layer reticulated shell structures. It is proposed to adopt the 1/6 partial double-layer reticulated shell structure in engineering if a double layer reticulated shell structure is required.  相似文献   

11.
以北京新机场装配式单层铝合金网壳结构作为研究对象,建立了其装配式节点——板式节点及考虑节点性能的单层铝合金网壳的有限元模型,分析了板式节点的力学性能及节点性能对单层铝合金网壳稳定性能的影响。研究表明:板式节点刚度良好,破坏表现为不锈钢拉铆钉剪切破坏、连接板拉剪破坏和杆件在螺栓孔处承压破坏;北京新机场装配式单层铝合金网壳结构的整体稳定性能良好,承载力约为刚接网壳结构的90%,满足JGJ 7—2010《空间网格结构技术规程》的要求;由于铝合金材料无明显的屈服台阶,弹性模量较小,考虑几何非线性和材料非线性的稳定承载力比仅考虑几何非线性的稳定承载力降低约30%,结构发生弹塑性失稳,结构失稳形态表现为网壳结构在靠近长轴右端出现凹陷。  相似文献   

12.
单层球面网壳的静力稳定性及抗震性能已经取得较为系统的研究成果,但在传统的研究方法中,学者们只考虑结构部分,忽略了屋面板、吊顶、隔墙等非结构构件的影响;其中,屋面系统作为一类非结构构件,其平面刚度较大、在动力荷载下的阻尼也较大的特点会在一定程度上影响结构的受力特性。因此,选取考虑屋面系统的单层球面网壳作为研究对象,开展屋面系统对于单层球面网壳弹塑性稳定性及抗震性能的影响研究。采用有限元分析软件ABAQUS分别建立带屋面系统单层球面网壳和传统单层球壳的数值模型;通过弧长法分别对两种模型进行均布荷载作用下的非线性数值模拟,对比分析屋面系统对单层球面网壳弹塑性稳定承载力的影响;对考虑屋面系统的网壳结构进行不同地震荷载作用下的时程动力分析,采用基于响应的分析方法,考察屋面系统对于网壳结构抗震性能的影响,得到屋面系统会显著提高网壳整体刚度、增强结构抗震能力的结论;本研究可为以后网壳结构的理论研究及工程实践提供一定的参考。  相似文献   

13.
斜拉网壳结构的非线性静力分析   总被引:21,自引:0,他引:21       下载免费PDF全文
斜拉网壳结构是一种新颖的杂交结构体系,是“刚性”和柔性基本结构结合的典型,可跨越更大的跨度。本文基于Taylor展开公式和变分原理,推导了具有二阶精度的空间杆单元新型几何非线性刚度矩阵。研究了斜拉索的非线性问题和塔柱简化计算问题。针对弹性和刚性支座,以及是否考虑塔柱共同工作等影响因素,借助孤长法,数值计算了斜拉柱面和斜拉穹顶网壳结构极限承载力问题;同时,分别与相应的网壳结构计算结果进行了比较,最后,得出了有应用价值的结论和建议。  相似文献   

14.
为研究下部支承对单层柱面网壳整体结构抗震性能的影响,建立了包含下部支承的整体结构有限元模型。通过增量动力分析方法对典型算例开展参数分析,分析了下部支承刚度、屋面荷载等参数对整体结构抗震性能的影响规律。结果表明:考虑下部支承与单层柱面网壳的耦合效应后,结构的自振频率减小,整体结构的刚度明显减弱;单层柱面网壳耦合体系的强震失效模式为强支承结构的网壳动力强度破坏与弱支承结构的支承动力强度破坏;随着支承刚度的增加,整体结构的承载力先减小后增大,网壳结构的塑性发展程度先增加后减小,下部支承结构的塑性发展程度逐渐减小;支承刚度越大,屋面荷载对结构承载力的影响越明显,整体结构的承载力随着屋面荷载的增加逐渐降低;考虑下部支承后整体结构的承载力降低了42.4%~85.5%,降低的原因主要包括下部支承结构的动力放大作用和柱间的不同步效应。  相似文献   

15.
介绍了某行政服务中心球形会议厅钢结构单层网壳的结构体系、设计过程,并对典型节点进行了分析研究。介绍了网壳结构稳定分析的方法,结合本工程进行了线性稳定分析、几何非线性稳定分析,得出了结构的线性特征值,找出了结构的薄弱部位,并得出了结构的极限承载了稳定系数,对类似工程具有一定的参考意义。  相似文献   

16.
拱支网壳结构体系是在综合了网壳(网架)及拱结构的优点的基础上,构思出的一种新型大跨度空间杂交结构形式。通过与一般柱面单层网壳结构的对比,对不同矢跨比的单层柱面拱支网壳结构考虑不同拱肋配置下的静力性能,特别是结构极限承载能力及对初始几何缺陷的敏感性进行了分析比较。介绍了几个采用单层柱面网壳结构作为屋面结构的工程实例及其采用拱肋加强后的实际效率。理论分析结果及工程应用表明,在拱结构的帮助下,柱面单层拱支网壳结构的静力性能得到了明显的改善。  相似文献   

17.
以中部单层、周围局部双层的球面网壳为对象,采用Newton-Raphson增量迭代及弧长法对结构进行了非线性有限元分析,总结了此类网壳结构的失稳规律,并且得出了结构由单层过渡到双层时临界荷载的变化规律。研究结果表明,局部双层网壳能够明显改善单层网壳的稳定性能,提高其网壳的屈曲荷载,既具有双层网壳的稳定性,又能节省钢材,是一种理想的空间结构形式。  相似文献   

18.
For the cylindrical reticulated mega-structure, two types of cable-strut arrangements are presented. The basic static properties of the pretensioned reticulated mega-structures with different types of cable-strut arrangements are compared and the optimal one is then selected. The elastic static property and stability of the structure with the optimal cable-strut arrangement is comprehensively analyzed. And the indexes including the decrease in structural displacement, reduction in horizontal support reactions, uniformity of distribution of member forces, and the improvement of structural stability are compared with those of the corresponding non-pretensioned reticulated mega-structure. Also, the effect of values and distribution of the cable pretensions on structural stability is studied, and the influence of half-span loading on structural stability is investigated. Results indicate that the static properties and stability of the structure can be most effectively improved for adoption of the crossover arrangement of the cables and struts according to the buckling shape of the non-pretensioned structure. Additionally, the ultimate load-carrying capacity of the structure with small ratio of rise to span can be more effectively improved when the pretension of the cables set in the mid-span is larger than that of the cables set on both sides of the structure.  相似文献   

19.
板锥网壳结构是一种受力性能合理,技术经济效益良好的新型空间结构形式。本文考虑板片和杆件协同工作时的几何非线性,采用弧长法跟踪荷载—位移全过程平衡路径,对板锥网壳结构的极限承载力性能进行全过程非线性跟踪分析,确定其稳定性能及杆件和锥体单元板件屈服顺序,对板锥网壳结构的破坏机理和极限承载力等问题进行了研究,并与普通双层网壳结构进行了比较,得出了可应用于工程实践的重要结论。  相似文献   

20.
强震下单层柱面网壳损伤及失效机理研究   总被引:10,自引:0,他引:10  
基于结构损伤理论,对单层柱面网壳在强震下的失效机理进行研究。单层柱面网壳在强震下不仅会发生动力失稳,也可能由于过度塑性发展导致动力强度破坏的模式。对于动力强度失效的研究,应当在分析中考虑材料损伤累积以及断裂效应的影响。为在有限元分析中包含这一影响因素,编制了基于通用有限元软件ABAQUS的用户材料子程序,具有较高的计算精度和较好的收敛性。应用其对单层柱面网壳在强震下的响应进行参数研究,并与基于理想弹塑性材料时的响应对比,讨论考虑材料损伤对网壳失效特征的影响。将单层柱面网壳在强震下失效时刻的多项特征响应进行统计分析,拟合了能够表征网壳损伤程度的损伤模型,建立单层柱面网壳在强震下的失效判别准则。针对实际工程抗震设计中采用损伤累积本构模型计算的困难,提出网壳结构失效极限的简化判别方法。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号