共查询到17条相似文献,搜索用时 515 毫秒
1.
全硅大断面脊形光波导传播特性的理论分析及实验结果 总被引:2,自引:0,他引:2
对当前硅光集成的研究焦点-制备大断面单模脊形光波导的单模条件,用有效折射率法进行分析,也计算了传播常数等性能参数。结果表明,有效折射率法有方法简明、结论确切的优点。它能同时给出单模区、多模区及截止区的条件,已有效指导了SIMOX及n/n+外延型两种单模脊形硅光波导的制备。文中最后给出了实验结果。 相似文献
2.
3.
脊形单模硅光波导的设计 总被引:1,自引:1,他引:0
对脊形单模硅光波导的模式特性进行了理论设计。分析了λ=1.3μm的脊形硅光波导的结构参数及工艺流程。这种光波导的数值孔径和单模光纤匹配,传播损耗低于平面条形硅光波导,文中并对传播损耗作了讨论。 相似文献
4.
利用有效折射率法分析了Ge0.05Si0.95/Si脊形光波导的光场分布,得到了这种光波导在传输单模时内脊高b、外脊高h和脊宽W的合理取值,还为其它光波导器件的设计奠定了基础。 相似文献
5.
利用有效折射率法分析了Ge0.05Si0.95/Si脊形光波导的光场分布,得到了这种光波导在传输单模时内脊高b,外脊高h和脊宽W的合理取值,还为其它光波导器件的设计奠定了基础。 相似文献
6.
7.
8.
通过分析和计算,得到了单模GexSi1-x脊形光波导内脊高、脊宽和腐蚀满足的关系。实践证明,按照这些关系可以成功设计制作 单模GexSi1-x脊形光波导。 相似文献
9.
10.
11.
A. Hocini T. Boumaza M. Bouchemat F. Royer J.J. Rousseau 《AEUE-International Journal of Electronics and Communications》2010,64(11):1042-1045
In this work, we demonstrate via numerical simulation the design rules that must be imposed on the geometry of magneto optical rib waveguides to make them behave as single-mode and phase matched rib waveguides. 相似文献
12.
13.
提出了一种基于光子晶体的粗波分-模分混合复用/解复用器,可在光子晶体上实现波分-模分的一体集成.根据时域耦合模理论,该器件采用点缺陷微腔和波长选择反射微腔的结构实现滤波.根据横向耦合模理论,利用非对称平行波导的结构实现模式转换.应用时域有限差分法对其性能进行分析,仿真结果表明,该器件可以实现1 550nm TE0模、1 570 nm TE0模、1 550 nm TE1模和1 570 nm TE1模四个信道信号的复用和解复用,且具有较低的插入损耗(0.23 d B)和信道串扰(-15.21 d B),该器件在CWDM-MDM中有重要作用,对提升城域网的容量具有重要价值. 相似文献
14.
15.
a new type of optical oscillator, involving coupled waveguide lasers (CWL's) consisting ofN identical single-mode active waveguides (N = 3,5 ) coupled with each other is proposed. Oscillation conditions of coupled waveguide lasers, such as threshold and effective length of waveguides, and output powers are examined theoretically, as compared with the conventional single-mode waveguide lasers. 相似文献
16.
A novel configuration of an integrated optical tunable wavelength demultiplexer with a stable channel spacing is proposed. The structure consists of a three-mode depressed index diffused waveguide with single-mode input and output waveguides. The refractive index depression has been designed using experimental data of double diffusion of MgO on Ti:LiNbO/sub 3/ waveguides. The BPM simulation of the structure supports the feasibility of the device and shows a good wavelength tunability.<> 相似文献
17.
We report a simple milled-groove process integrated with a two-step ion-diffused waveguide fabrication for efficient coupling between single-mode fibers and integrated optical waveguides andY - branches. We demonstrate such a coupling technique using a) a multimode transition to single-mode waveguide coupler, and b) an integrated optical 3-dB branching waveguide coupler from a single-mode fiber to silver/sodium ion-enchanged waveguide components. The coupling loss was about 1-2 dB over a propagation length of 2 cm at an operating wavelength of 633 nm. 相似文献