共查询到18条相似文献,搜索用时 156 毫秒
1.
超支化聚合物在不影响工艺性的前提下对环氧树脂有明显的增强、增韧作用。本文主要概述了超支化聚合物对环氧树脂力学性能、耐热性能的影响,主要包括:聚酯超支化聚合物改性环氧树脂、聚酰胺/聚酰亚胺/聚乙烯亚胺超支化聚合物改性环氧树脂、有机硅超支化聚合物改性环氧树脂以及其他超支化聚合物改性环氧树脂等。此外,还指出了目前超支化聚合物改性环氧树脂的缺点以及未来的发展方向。当前限制HBPs在环氧树脂改性领域内大规模应用的主要缺点在于大多数HBPs合成步骤繁琐复杂,合成成本较高。鉴于此,在未来随着更简单、绿色的合成方法的出现,HBPs在其他新兴领域以及改性树脂中的应用会越来越广泛。 相似文献
2.
3.
4.
超支化聚合物是一类具有不同于线性聚合物性质的新型高分子材料,原子转移自由基聚合(ATRP)作为一种活性可控聚合方法,在超支化聚合物合成领域发挥着重要的作用。ATRP在Cu(I)催化体系下不仅可以催化AB~*型单体生成超支化聚合物,而且还可以多官能团的大分子为引发剂,生成具有"核-壳"结构的两亲性共聚物或其它特殊结构大分子。文中主要介绍了近年来采用ATRP法合成的不同结构超支化聚合物,并对ATRP在超支化大分子合成中的应用前景进行了展望。 相似文献
5.
6.
7.
8.
末端环氧化超支化荧光聚合物的合成 总被引:3,自引:0,他引:3
通过季戊四醇、偏苯三酸酐、环氧氯丙烷合成超支化聚酯,利用合成聚合物分子外围的羧基与二缩水甘油醚、甲萘胺反应,形成末端官能化超支化荧光聚合物,在获得荧光聚合物的同时,不仅保留了超支化聚合物的良好的相溶性,其热性能也得到了改善;通过DSC、TG、红外光谱、荧光光谱等手段研究了合成聚合物的热稳定性,及结构与荧光性能的关系。 相似文献
9.
超支化聚合物因其独特的结构和性质而备受关注,聚氨酯(PU)因其优越的性能而得到广泛应用。超支化聚氨酯(HBPU)综合了超支化聚合物独特的结构和PU优异的性能,是近年来高分子材料领域的研究热点。本文主要综述了HBPU合成方法,介绍了HBPU在涂料、形状记忆材料以及生物材料中的应用,同时对HBPU的发展前景进行了分析和展望。 相似文献
10.
11.
The thermo-mechanical properties of hyperbranched polymer-epoxy blends and their dependence on hyperbranched polymer shell chemistry were investigated. Hyperbranched polymers were shown to be able to increase resin toughness by inducing both a heterogeneous and homogeneous morphology. While the former was better performing in terms of toughness, the latter showed satisfactory toughness together with complete transparency. In order to understand fracture toughness enhancement, toughening mechanisms as well as the properties of both matrix and particles were studied. Particle composition was derived by combining dynamic mechanical analysis and the Fox equation. This resulted in an evaluation not only of particle composition but also of glass transition temperature and stiffness, whose value was cross-checked by a micro-mechanical model. The complete picture concerning particle and matrix properties, as well as toughening mechanisms and their dependence on hyperbranched polymer shell chemistry, finally enabled defining the optimum molecular design of the hyperbranched polymers in order to achieve the desired fracture toughness. 相似文献
12.
13.
14.
15.
端叠氮基超支化聚酯的合成与表征 总被引:1,自引:0,他引:1
以三羟甲基丙烷为核、对甲苯磺酸为催化剂,2,2-二羟甲基丙酸缩聚为端羟基超支化聚酯,端羟基先后经磺酰化改性和叠氮基取代后得到端叠氮基超支化聚酯。利用红外光谱、核磁共振、元素分析、凝胶色谱等方法对目标产物进行了结构表征和确认;在此基础上,对目标产品进行了热重(TG)和差示扫描量热(DSC)表征。结果表明:端叠氮基超支化聚酯的支化度为0.45;热分解分为两个阶段,分别是端叠氮基热分解(249.4℃)和主链热分解(350℃);玻璃化转变温度为-55.2℃。 相似文献
16.
超支化聚合物以其独特的结构和性能及可实现规模化生产而成为研究热点之一。本文主要介绍了超支化聚合物的合成方法、应用及最新研究进展,旨在加深人们对该领域的了解,从而加速该领域的发展。 相似文献
17.
We report the synthesis of CdS hyperbranched nanocrystals using a simple hot coordination solvents method. Transmission electron microscopy studies showed that the length of the arms and the angle of branching could be controlled by varying organic surfactants in terms of amount and type. It was found that long chain carboxylic acids favored the synthesis of CdS hyperbranched nanocrystals. Although their absorption spectra of CdS hyperbranched nanocrystals did not display sharp features, the photoluminescence spectra showed two emission peaks, i.e., the corresponding luminescence peak around 486 nm originates from the band edge and the broad band emission from 560 nm extended to the region of near infrared arises from trap-related recombination of as-prepared CdS hyperbranched nanocrystals. 相似文献
18.
将原子转移自由基聚合(ATRP)和自缩合乙烯基聚合(SCVP)结合,以p-CMS为引发单体进行ATRP溶液聚合,得到高支化的聚对氯甲基苯乙烯PCMS。研究了采用不同溶剂时,各种因素对聚合物PCMS组成和结构的影响,讨论了产生这些影响的可能原因。 相似文献