Influence of field recycled coarse aggregate on properties of concrete

This paper investigates the influence of different amounts of recycled coarse aggregates obtained from a demolished RCC culvert 15 years old on the properties of recycled aggregate concrete (RAC). A new term called “coarse aggregate replacement ratio (CRR)” is introduced and is defined as the ratio of weight of recycled coarse aggregate to the total weight of coarse aggregate in a concrete mix. To analyze the behaviour of concrete in both the fresh and hardened state, a coarse aggregate replacement ratio of 0, 0.25, 0.50 and 1.0 are adopted in the concrete mixes. The properties namely compressive and indirect tensile strengths, modulus of elasticity, water absorption, volume of voids, density of hardened concrete and depth of chloride penetration are studied. From the experimental results it is observed that the concrete cured in air after 7 days of wet curing shows better strength than concrete cured completely under water for 28 days for all coarse aggregate replacement ratios. The volume of voids and water absorption of recycled aggregate concrete are 2.61 and 1.82% higher than those of normal concrete due to the high absorption capacity of old mortar adhered to recycled aggregates. The relationships among compressive strength, tensile strengths and modulus of elasticity are developed and verified with the models reported in the literature for both normal and recycled aggregate concrete. In addition, the non-destructive testing parameters such as rebound number and UPV (Ultrasonic pulse velocity) are reported. The study demonstrates the potential use of field recycled coarse aggregates (RCA) in concrete.     

On the classification of mixed construction and demolition waste aggregate by porosity and its impact on the mechanical performance of concrete

The properties of recycled aggregate produced from mixed (masonry and concrete) construction and demolition (C&D) waste are highly variable, and this restricts the use of such aggregate in structural concrete production. The development of classification techniques capable of reducing this variability is instrumental for quality control purposes and the production of high quality C&D aggregate. This paper investigates how the classification of C&D mixed coarse aggregate according to porosity influences the mechanical performance of concrete. Concretes using a variety of C&D aggregate porosity classes and different water/cement ratios were produced and the mechanical properties measured. For concretes produced with constant volume fractions of water, cement, natural sand and coarse aggregate from recycled mixed C&D waste, the compressive strength and Young modulus are direct exponential functions of the aggregate porosity. Sink and float technique is a simple laboratory density separation tool that facilitates the separation of cement particles with lower porosity, a difficult task when done only by visual sorting. For this experiment, separation using a 2.2 kg/dm3 suspension produced recycled aggregate (porosity less than 17%) which yielded good performance in concrete production. Industrial gravity separators may lead to the production of high quality recycled aggregate from mixed C&D waste for structural concrete applications.     

基于CT图像的再生混凝土细观破坏裂纹分形特征

为深入研究再生混凝土的破坏形态和内部裂纹扩展情况与普通混凝土之间的差异,以不同再生粗骨料(RCA)取代率的再生混凝土为研究对象,利用Phoenix v | tome | x s240微焦点工业CT获取再生混凝土加载到90%预估破坏荷载的二维扫描图像,借助Photoshop CS6图像处理软件,对材料内部破坏裂纹进行提取,进而基于分形几何理论,以分形维数及多重分形谱表征裂纹的分形扩展规律,建立分形维数和多重分形谱特征参数与RCA取代率和再生混凝土抗压强度的关系。结果表明:再生混凝土的细观受力破坏模式与普通混凝土不同,其受力破坏形态不仅取决于粗骨料与水泥浆体的界面黏结强度,还取决于RCA自身性能,当裂纹发展至天然粗骨料或强度较高的RCA时会绕过骨料表面继续发展,发展至强度较低的RCA时会贯穿骨料;分形维数可定量描述混凝土材料内部细观裂纹的整体扩展情况,即裂纹越丰富,分形维数越大;多重分形谱可反映从局部到整体不同层次的细观裂纹特征,裂纹分形维数和多重分形谱特征参数均与RCA取代率呈线性下降关系,与抗压强度呈线性增长关系;本研究可为再生混凝土在大型结构工程中的广泛应用奠定理论和实验基础。      

Influence of steam curing on the pore structures and mechanical properties of fly-ash high performance concrete prepared with recycled aggregates

In this research work, High Performance Concrete (HPC) was produced employing 30% of fly ash and 70% of Portland cement as binder materials. Three types of coarse recycled concrete aggregates (RCA) sourced from medium to high strength concretes were employed as 100% replacement of natural aggregates for recycled aggregate concrete (RAC) production. The specimens of four types of concretes (natural aggregate concrete (NAC) and three RACs) were subjected to initial steam curing besides the conventional curing process. The use of high quality RCA (>100 MPa) in HPC produced RAC with similar or improved pore structures, compressive and splitting tensile strengths, and modulus of elasticity to those of NAC. It was determined that the mechanical and physical behaviour of HPC decreased with the reduction of RCA quality. Nonetheless steam-cured RACs had greater reductions of porosity up to 90 days than NAC, which led to lower capillary pore volume.     

再生粗骨料硅烷浸渍处理对混凝土介质传输性能的影响

由于残余砂浆的存在,再生粗骨料的物理力学指标远不及天然骨料,致使再生混凝土力学和耐久性能较差;此外,水分及有害离子侵入混凝土内部是引起混凝土材料性能劣化的主要原因。本试验用质量分数为8wt%的硅烷乳液浸渍强化再生粗骨料,通过抗压强度、毛细吸水和抗氯离子侵蚀试验对硅烷浸渍前后不同骨料质量取代率(0%、30%、50%)的再生混凝土介质传输性能进行了研究,最后利用SEM对再生混凝土内部的微观结构进行分析。试验结果表明,硅烷浸渍处理再生粗骨料的吸水率显著降低,由其制备的混凝土强度稍有所下降;再生混凝土毛细累积吸水量明显减少,且抗氯盐侵蚀性能显著提高,其中骨料质量取代率为50%的再生混凝土浸渍处理后氯离子扩散系数降低了37.5%。研究表明,硅烷浸渍处理再生粗骨料是提高再生混凝土耐久性的有效途径。      

Creep and drying shrinkage characteristics of concrete produced with coarse recycled concrete aggregate

Laboratory tests are performed to investigate the effects of a new method of mixture proportioning on the creep and shrinkage characteristics of concrete made with recycled concrete aggregate (RCA). In this method, RCA is treated as a two component composite material consisting of residual mortar and natural aggregate; accordingly, when proportioning the concrete mixture, the relative amount and properties of each component are individually considered. The test variables include the mixture proportioning method, and the aggregate type. The results show that the amounts of creep and shrinkage in concretes made with coarse RCA, and proportioned by the new method, are comparable to, or even lower than, those in similar concretes made entirely with natural aggregates. Furthermore, it is demonstrated that by applying the proposed “residual mortar factor” to the existing ACI and CEB methods for calculating creep or shrinkage of conventional concrete, these methods could be also applied to predict the creep and shrinkage of RCA-concrete.     

Effect of recycled coarse aggregate on damage of recycled concrete

This study evaluates the possibility of measuring the damage of the recycled concrete. In this way, two conventional concretes with a w/c ratio of 0.55 and 0.65 were designed. Based on them, six recycled concretes with different percentages of replacement of natural coarse aggregates with recycled coarse aggregate (20, 50 and 100%) were obtained. To take into account the high absorption capacity of the recycled aggregates, before using them they were pre-wetted for 10 min. The results concluded that scalar damage mechanics (based on the variations of the elastic modulus) and volumetric strains curves can be use to quantify the damage of the recycled concrete. The results from both approaches indicated that the damage to concrete depended on the percentage of replacement, increasing with higher replacement percentages. Additionally, values of the damage, that are quantified using the critical stress and according to the scalar damage mechanics, are given.     

Properties of self-compacting concrete prepared with coarse and fine recycled concrete aggregates

In this study, the fresh and hardened properties of self-compacting concrete (SCC) using recycled concrete aggregate as both coarse and fine aggregates were evaluated. Three series of SCC mixtures were prepared with 100% coarse recycled aggregates, and different levels of fine recycled aggregates were used to replace river sand. The cement content was kept constant for all concrete mixtures. The SCC mixtures were prepared with 0, 25, 50, 75 and 100% fine recycled aggregates, the corresponding water-to-binder ratios (W/B) were 0.53 and 0.44 for the SCC mixtures in Series I and II, respectively. The SCC mixtures in Series III were prepared with 100% recycled concrete aggregates (both coarse and fine) but three different W/B ratios of 0.44, 0.40 and 0.35 were used. Different tests covering fresh, hardened and durability properties of these SCC mixtures were executed. The results indicate that the properties of the SCCs made from river sand and crushed fine recycled aggregates showed only slight differences. The feasibility of utilizing fine and coarse recycled aggregates with rejected fly ash and Class F fly ash for self-compacting concrete has been demonstrated.     

Compressive stress–strain behavior of steel fiber reinforced-recycled aggregate concrete

The use of recycled aggregate from construction and demolition waste (CDW) as replacement of fine and coarse natural aggregate has increased in recent years in order to reduce the high consumption of natural resources by the civil construction sector. In this work, an experimental investigation was carried out to investigate the influence of steel fiber reinforcement on the stress–strain behavior of concrete made with CDW aggregates. In addition, the flexural strength and splitting tensile strength of the mixtures were also determined. Natural coarse and fine aggregates were replaced by recycled coarse aggregate (RCA) and recycled fine aggregate (RFA) at two levels, 0% and 25%, by volume. Hooked end steel fibers with 35 mm of length and aspect ratio of 65 were used as reinforcement in a volume fraction of 0.75%. The research results show that the addition of steel fiber and recycled aggregate increased the mechanical strength and modified the fracture process relative to that of the reference concrete. The stress–strain behavior of recycled aggregate concrete was affected by the recycled aggregate and presented a more brittle behavior than the reference one. With the addition of steel fiber the toughness, measured by the slope of the descending branch of the stress–strain curve, of the recycled concretes was increased and their behavior under compression becomes similar to that of the fiber-reinforced natural aggregate concrete.     

Reuse of sanitary ceramic wastes as coarse aggregate in eco-efficient concretes

The sanitary ceramics industry inevitably generates wastes, irrespective of the improvements introduced in manufacturing processes. The present study investigated the reuse of these wastes as recycled coarse aggregate in partial substitution (15%, 20% and 25%) of natural coarse aggregates in the manufacture of structural concretes. The results demonstrate that recycled, eco-efficient concretes present superior mechanical behaviour compared to conventional concrete and it was moreover appreciated that the recycled ceramic aggregate does not interfere in a negative way during the hydration process. It was also observed that the microstructure in the interfacial transition zone (ITZ) between recycled ceramic aggregate and paste was more compact than in the case of natural aggregate and paste.     

Structural concrete with incorporation of coarse recycled concrete and ceramic aggregates: durability performance

The growing difficulty in obtaining natural coarse aggregates (NCA) for the production of concrete, associated to the environmental issues and social costs that the uncontrolled extraction of natural aggregates creates, led to a search for feasible alternatives. One of the possible paths is to reuse construction and demolition waste (CDW) as aggregates to incorporate into the production of new concrete. Therefore, a vast and detailed experimental campaign was implemented at Instituto Superior Técnico (IST), which aimed at determining the viability of incorporating coarse aggregates from concrete and ceramic brick wall debris, in the production of a new concrete, with properties acceptable for its use in new reinforced and pre-stressed structures. In the experimental campaign different compositions were studied by incorporating pre-determined percentages of recycled coarse concrete aggregates and recycled coarse ceramic plus mortar particles, and the main mechanical, deformability and durability properties were quantified, by comparison with a conventional reference concrete (RC). In this article, these results are presented in terms of the durability performance of concrete, namely water absorption, carbonation and chlorides penetration resistance.     

A study of concrete properties using phyllite as coarse aggregates

Nowadays, industrial activities generate a huge amount of waste. One such activity is underground mining which generates phyllite wastes that are recycled as coarse aggregates for use in concrete production. Aggregate use in concrete is dependent on availability. This paper reports of an experimental study on some of the physical and mechanical properties of phyllite aggregate concrete as compared to granite (conventional) aggregate concrete. The obtained physical and mechanical properties of both aggregates for specific gravity, water absorption (%), dry density, aggregate impact value (%), aggregate crushing value (%), 10% fines, elongation index (%), flakiness index (%) and Los Angeles abrasion values satisfied minimum requirements for aggregates suitable for concrete production. Five mixes of concrete mix proportions designated M1, M2, M3, M4 and M5 were cast using phyllite and granite aggregates. A total of 400 concrete cubes and 210 modulus of rupture beams were cast and cured by total submerging in water for ages 3, 7, 14, 28, 56, 90, 180 and 360 days before compression and bending tests were performed. The results show that the trends in the development of compressive and bending strengths of plain phyllite concrete were similar to those in granite (conventional) aggregate concrete. However the compressive and bending strengths of phyllite concrete mixes were on the average 15–20% lower than those of the corresponding granite concrete mixes at all ages. The same concrete mix proportions gave lower concrete classes for phyllite compared to granite with the exception of the lowest grade. This was probably because the flakiness and elongation properties coupled with reactive materials in phyllite aggregates affect the absorption and bond characteristics of its concrete.     

Mechanical behavior of recycled coarse aggregate concrete reinforced with steel fibers under direct shear

Recycled coarse aggregate (RCA) concrete has attracted more and more attention worldwide in recent years due to the exhaustion of natural coarse aggregate and environmental pollution from construction and demolition waste in civil engineering. In this study, experiments were carried out on over 100 specimens to investigate the mechanical properties and failure mode of concrete with different volume content of steel fibers (0%, 0.5%, 1%, 1.5%, and 2%) and different RCA replacement ratio (0%, 30%, 50% and 100%) under direct shear load. The results show that addition of steel fibers can effectively improve the shear strength and shear toughness of RCA concrete. For a given compressive strength, the RCA replacement ratio has negligible impact on shear strength, but shear deformation and toughness increase as RCA replacement ratio reaches above a ‘limiting value’. A shear strength formula for steel fiber reinforced RCA concrete (SFRCAC) based on compressive strength and characteristic coefficient of steel fiber has been put forward.     

Cement paste content and water absorption of recycled concrete coarse aggregates

In this paper, we first show that the amount of residual cement paste in recycled concrete aggregates (RCA) depends on the initial paste content, on the mechanical properties of the initial cement paste and on the mechanical quality of the transition zone at the interface between the initial natural aggregates and cement paste. Our results suggest that water absorption of RCA at 24 h can be seen as the simple sum of the capillary absorption of both residual cement paste and initial natural aggregates. The absorption kinetics is similar to the capillary absorption of traditional uncrushed concretes but, on the industrial time scale of interest, is strongly affected by the size and configuration of the residual cement paste patches at the surface of the initial natural aggregates. We finally propose a tentative frame for a classification of RCA based on water absorption rate and water absorption capacity at 24 h.     

Caractérisation de la durabilité des bétons recyclés à base de gros et fins granulats de briques et de béton concassés

Among the transport phenomena, water absorption, water permeability and shrinkage prove to be of primary and great importance for the evaluation of durability of recycled concrete with coarse and fine recycled aggregates. Either coarse aggregates, fine aggregates or both coarse and fine aggregates were partially replaced (25, 50, 75 and 100%) with crushed concrete and brick aggregates. The results indicate that water absorption is high and water permeability can be double that of concrete made with 100% natural aggregate concrete. This study also showed that recycled concrete mix having the highest water absorption and water permeably corresponds always to the mix with the highest shrinkage. The physical and mechanical properties of recycled concretes seem to be acceptable.     

Bond between steel reinforcement bars and Electric Arc Furnace slag concrete

This paper deals with the bond between steel reinforcement and recycled aggregate concrete, including Electric arc furnace (EAF) slag as full replacement of natural coarse aggregates. Pull-out tests were carried out according to RILEM standard on specimens made with six concrete mixtures, characterized by different w/c ratios and types of aggregates. Plain and ribbed steel reinforcement bars were used to observe the influence of steel roughness. Experimental bond-slip relationships were analyzed, and results show similar bond mechanisms between the reference and EAF concrete specimens. Significant bond strength enhancement is observed in concretes with low w/c ratio, when EAF slag is used as recycled coarse aggregate. Experimental results in terms of bond strength were also compared to analytical predictions, obtained with empirical formulations.     

Performance of mortar prepared with recycled concrete aggregate enhanced by CO2 and pozzolan slurry

One of the most promising strategies to manage the large volume of construction and demolition (C&D) waste is recycling and utilizing it for the production of new concrete. However, recycled concrete aggregate (RCA) derived from C&D waste possesses relatively higher porosity and water absorption capability, which often limits its wild utilization. In this study, pozzolan slurry (includes silica fume, nano-SiO₂, and fly ash slurries) and CO₂ treatments as enhancement methods for RCA were investigated. Test results showed that CO₂ treatment was more effective in reducing water absorption and enhancing fluidity, whereas pozzolan slurry treatment could decrease fluidity. Mortars prepared with treated RCA exhibited better mechanical strength and higher resistance towards carbonation and chloride-ion diffusion than those with untreated RCA. Both pozzolan slurry and CO₂ treatments enhanced not only the properties of RCA, but also the old and new interfacial transition zones (ITZs) as demonstrated in the measured micro-hardness and SEM observation.     

Pore characterization of manufactured aggregates: recycled concrete aggregates and lightweight aggregates

Accurate characterization of aggregates plays an important role in mixture proportioning of concrete mixes. Decisions made during the concrete design phase in terms of characterization techniques adopted for quantification of specific gravity or water absorption affect the development of fresh properties during the construction phase as well as impacting the long term performance of concrete. Manufactured aggregates such as recycled concrete aggregates (RCA) and lightweight aggregate (LWA) are more absorptive than natural aggregate. Due to the thrust on construction of sustainable structures usage of LWA and RCA has increased significantly in the last decade. In this study, standard ASTM techniques adopted for porosity and specific gravity measurement of aggregates were compared with automated testing equipment such as the helium pycnometer and the envelope density analyzer. Porosity of different aggregates obtained using different test methods was compared with image analysis. Pore diameter characterization of different RCA was conducted using image analysis.     

Short and long-term behavior of structural concrete with recycled concrete aggregate

Recycling concrete construction waste is a promising way towards sustainable construction. Coarse recycled concrete aggregates have been widely studied in recent years, however only few data have been reported on the use of fine recycled aggregates. Moreover, a lack of reliable data on long-term properties of recycled aggregate concrete has to be pointed out.In this paper the effects of both fine and coarse recycled concrete aggregates on short and long-term mechanical and physical properties of new structural concrete are investigated. The studied concrete mixes have been designed by adjusting and selecting the content and grain size distribution of concrete waste with the goal to obtain medium–high compressive strength with high content of recycled aggregates (ranging from 27% to 63.5% of total amount of aggregates).Time-dependent properties, such as shrinkage and creep, combined with porosity measurements and mechanical investigations are reported as fundamental features to assess structural concrete behavior.     

Performance evaluation of structural concrete using controlled quality coarse and fine recycled concrete aggregate

This paper presents the fresh, mechanical, and durability performance, of a structural concrete mix classified as C-1, by the Canadian Standards Association (CSA) made with controlled quality Recycled Concrete Aggregate (RCA). Five mixes with water-to-cementing material (w/cm) ratio of 0.40 were produced with various RCA contents and tested against two 0% RCA control mixes made with General Use (GU) cement, and General Use Limestone cement (GUL). The RCA contents in the mixes were 10%, 20%, and 30% by coarse aggregate volume replacement, as well as 10% and 20% fine and coarse (granular) aggregate volume replacement. All evaluated mixes met the specifications from the CSA for fresh, mechanical, and durability properties. The coarse RCA mixes performed better than the granular RCA mixes in terms of flexural and splitting tensile strengths, linear drying shrinkage, water sorptivity, and rapid chloride-ion permeability, where the test results were significantly affected by the ultra fines present in the granular RCA.