蒽醌冠醚双功能化杯[4]芳烃的合成与表征

以对叔丁基杯[4]芳烃为原料,经碱催化两步合成了26,28-双（2-亚甲基蒽醌）-5,11,17,23-四叔丁基杯[4]-25,27-冠-6。产物经IR、1HNMR表征和元素分析表征,该衍生物为锥形结构并与设计思想一致。     

6,7-甲氧基香豆素冠醚双功能化杯【4】芳烃的合成与表征

以对叔丁基杯[4]芳烃为原料,经碱催化两步合成了26,28-二（6,7-二甲氧基香豆素-4-亚甲基）-5,11,17,23-四叔丁基杯[4]芳烃-25,27-冠-6,产物经IR、^1H NMR表征和元素分析表征,该衍生物为锥形结构并与设计思想一致。     

杯[4]芳烃咪唑盐的微波合成及在氟化反应中的应用

以杯[4]芳烃为起始原料,首先制得中间体杯[4]芳烃双溴代烷基衍生物,然后经微波辐射和阴离子交换,共得9种杯[4]芳烃咪唑盐衍生物,化合物的结构与构象经元素分析、IR、1HNMR、19FNMR、31PNMR表征.研究了它们在对氯硝基苯氟化反应中的催化性能以及对K+的萃取性能.结果表明,这9种化合物在氟化反应中的催化效果良好,对氟硝基苯的收率为80.89％～92.67％;同时化合物对K+具有较好的萃取效果,其中以化合物25,27-二[4-(3-甲基咪唑)乙氧基]-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃六氟磷酸盐的萃取效果最好,萃取率可达75.45％.     

含金刚烷胺的杯［4］芳烃衍生物的合成及抗菌活性研究

对叔丁基杯[4]芳烃与对甲苯磺酸酯基乙氧基对苯甲醛反应生成对叔丁基杯[4]芳烃-1,3-二醛基衍生物1,对叔丁基杯[4]芳烃-1,3-二醛基衍生物1与金刚烷胺进行分子间缩合反应得到含金刚烷基的新型杯[4]芳烃衍生物,并利用1H NMR,13C NMR,MS和元素分析对目标化合物的结构进行了表征。初步的抗菌试验表明,该化合物表现出较好的抑菌活性。     

羧基苯偶氮基杯[4]芳烃衍生物的合成、表征及光谱特性

以邻、间、对氨基苯甲酸和杯 [4]芳烃为原料 ,经重氮化 -偶联反应合成了发色邻、间、对羧基苯偶氮基杯 [4]芳烃 ,产物的结构经 IR,1H NMR和元素分析表征 ;研究了它们的生色原理和光谱性能。结果表明它们是一类新型指示剂和具有新型配位空腔的主体分子。     

含杯[4]芳烃的金刚烷甲酰腙的合成及抗菌活性研究

对叔丁基杯[4]芳烃与对甲苯磺酸酯基乙氧基对苯甲醛反应生成对叔丁基杯[4]芳烃-1,3-二醛基衍生物1,对叔丁基杯[4]芳烃-1,3-二醛基衍生物1与金刚烷甲酰肼进行分子间缩合反应得到含杯[4]芳烃的金刚烷甲酰腙化合物2,并利用1H NMR,13C NMR,MS和元素分析对目标化合物的结构进行了表征。初步的抗菌试验表明,该化合物表现出较好的抗菌活性。     

氨基苯甲酸酯杯[4]芳烃衍生物的合成及性能研究

以对叔丁基杯[4]芳烃为原料,与1,2-二溴乙烷反应得到25,27-二(2-溴乙氧基)-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃,分别与苯佐卡因、三卡因、盐酸普鲁卡因在K2CO3、Na I/DMF体系中反应,以48%~63%的产率合成了3种新型含氨基苯甲酸酯结构的杯[4]芳烃衍生物——25,27-二(2-(对乙氧羰基苯基)氨基)乙氧基-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃、25,27-二(2-(3-乙氧羰基苯基)氨基)乙氧基-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃和25,27-二(2-(4-(2-(二乙基氨基))乙氧羰基苯基)氨基)乙氧基-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃。新化合物的结构与构象经元素分析、IR、1HNMR表征证实。研究它们对K+、Pb2+等9种金属离子的萃取性能以及对氨基酸的分子识别作用。结果表明,新型杯[4]芳烃衍生物对过渡金属离子具有良好的萃取效果,对Fe2+、Cu2+、Pb2+、Zn2+、Ag+的萃取率高达90%以上;同时与氨基酸也能发生很好的配合作用,能有效地识别氨基酸,对带芳环的氨基酸比脂肪氨基酸的识别效果更好。     

杯[4]芳烃偶氮衍生物的合成及其金属离子萃取性能

杯芳烃作为超分子化学的重要组成部分,近年来得到了快速发展并成为化学家的研究热点。以脱叔丁基-杯[4]芳烃为原料合成了杯[4]芳烃偶氮衍生物,其结构经IR和1H NMR所表征。研究了该主体分子对金属离子的萃取性能,实验结果表明,该主体分子对Mg2＋具有较高的萃取作用。讨论了主客体间配位作用的机制。     

两种杯[4]芳烃化合物对天然橡胶耐热氧老化性能的影响及抗氧化机理

将含乙氧基甲基侧链的杯[4]芳烃-1和含硫醚基及正己基侧链的杯[4]芳烃-2作为抗氧剂加入天然橡胶(NR)中,研究其对NR硫化胶物理性能和耐热氧老化性能的影响,并分析其抗氧化机理。结果表明:杯[4]芳烃-1和杯[4]芳烃-2(用量均为1份)对NR硫化胶的物理性能影响均不大,均可有效提高NR硫化胶的耐热氧老化性能;添加杯[4]芳烃-2的NR硫化胶耐热氧老化性能与添加抗氧剂2246S的NR硫化胶相当,优于添加杯[4]芳烃-1的NR硫化胶,这主要归因于杯[4]芳烃-2与NR良好的相容性以及酚羟基与硫醚基的协同抗氧效应。     

5,11,17,23-四溴-26,28-二甲氧基杯[4]芳烃的合成与表征

在室温下以丁酮为溶剂,26,28-二甲氧基杯[4]芳烃与N-溴代丁二酰亚胺(NBS)反应生成新化合物5,11,17,23-四溴-26,28-二甲氧基杯[4]芳烃,通过MS、1H NMR和13C NMR对其结构进行了表征.     

Conductivities of AlCl3/Ionic Liquid Systems and Their Application in Electrodeposition of Aluminium

Solubilities and conductivities of anhydrous AlCl3 in six kinds of ionic liquids (ILs) were measured. Among the six kinds of ILs [bmim]Cl, [bmim]Br, [bmim]BF4, [bmim]PF6, [emim][EtSO4] and [bmim][HSO4], anhydrous AlCl3 could be dissolved in the first five kinds but was hardly dissolved in [bmim][HSO4]. The results showed that the nominal solubilities of AlCl3 in ILs increased in the order of [bmim][HSO4] < [bmim]PF6 < [emim][EtSO4] < [bmim]BF4 < [bmim]Cl < [bmim]Br. Conductivities of the AlCl3/ILs systems depended apparently on the nominal molar ratio of AlCl3 to ILs. The conductivities of AlCl3/[bmim]Cl, AlCl3/[bmim]Br and AlCl3/[bmim]PF6 systems had a similar tendency as a function of the nominal molar ratio, that is, as the molar ratio was increased, conductivities increased first and then decreased, with the maximum conductivity obtained at approximately 0.9:1, 1.0:1 and 0.5:1, respectively. Conductivities of the AlCl3/[bmim]BF4 exhibited a dentate change and decreased with the molar ratio of AlCl3 to [bmim]BF4 increasing in general. With the increasing of the anhydrous AlCl3 amount in [emim][EtSO4], conductivity of AlCl3/[emim][EtSO4] monotonically decreased. AlCl3/[bmim]Cl system was chosen as the electrolyte for the electrodeposition of Al. Preliminary experimental results showed that dense, adherent and homogeneous Al coatings could be electrodeposited on stainless steel by means of constant potential technique and the surface coverage was quite satisfactory.     

新型四氢吡啶并[4,3-d]嘧啶化合物的合成及生物活性

[目的]为寻找具有较高生物活性的四氢吡啶并[4,3-d]嘧啶类农药先导化合物.[方法]以4-哌啶酮-3-羧酸乙酯盐酸盐和2,4-二氯嘧啶为初始原料,采用微波辅助技术,经3步反应,合成了16个四氢吡啶并[4,3-d]嘧啶化合物Va1～Vd4,其结构经1H NMR、元素分析及高分辨质谱确证且进行杀菌活性测定.[结果]目标化...     

Novel magnesium and zinc porphyrazines containing galactose moieties: Synthesis via click reaction and characterization

In this study, galactose conjugated new magnesium and zinc porphyrazines were synthesized by the cyclotetramerization reaction of 2,3-bis[1-(2,2,7,7-tetramethyltetra-hydro-bis[1,3]dioxolo[4,5-b;4′,5′-d]pyran-5,methyl)-1H-[1,2,3]triazol-4-yl methylsulfanyl]-but 2-enedinitrile. This substituted dicyano compound was prepared via two different routes. One started from cis-1,2-dicyano-1,2-ethylenedithiolate disodium, [1-(2, 2, 7,7-tetramethyltetrahydrobis[1,3]dioxolo[4,5-b;4′,5′-d]pyran-5-yl-methyl)-1H-[1,2,3]triazo-l-4-yl]methanol and ended in a multi-step reaction sequence via Click procedures. The other reaction was between 5-azidomethyl-2,2,7,7-tetramethyltetrahydro-bis[1,3]dioxolo[4,5-b;4′,5′-d]pyran and (2Z)-2,3-bis(prop-2-yl-1-yl-thio)but-2-enedinitrile. A very soluble galactose linked magnesium porphyrazine derivative in common polar solvents and water was achieved by the deprotected isopropylidene groups in TFA and water media. It is first time, zinc porphyrazine complex has been achieved at one-step reaction by using Zn(BuO)₂ as template agent. The new compounds have been characterized by a combination of elemental analysis, ¹H, ¹³C NMR, IR, UV–vis and MS spectral data.     

Synthesis,Thermal Stability and Impact Stability of Novel Tetranitro‐Dipyridotetraazapentalene Derivatives

The synthetic details for the construction of three new dipyridotetraazapentalene derivatives, 5H‐pyrido[3″,4″:4′,5′] [1,2,3]triazolo‐ [1′,2′:1,2][1,2,3]triazolo[5,4‐b]pyridin‐6‐ium inner salt ( 8 ), 5H‐pyrido[3″,2″:4′,5′] [1,2,3]triazolo[1′,2′:1,2] [1,2,3]triazolo[5,4‐b]‐pyridin‐6‐ium inner salt ( 15 ) and 5H‐pyrido[2″,3″:4′,5′] [1,2,3]‐triazolo[1′,2′:1,2][1,2,3]triazolo[4,5‐b]pyridin‐6‐ium inner salt ( 16 ) are presented. Nitration of ( 8 ) and ( 15 ) afforded the novel tetranitrodipyridotetraazapentalene derivatives, 2,4,8,10‐tetranitro‐5H‐pyrido[3″,4″:4′,5′][1,2,3]triazolo[1′,2′:1,2][1,2,3]‐triazolo[5,4‐b]‐pyridin‐6‐ium inner salt ( 3 ) and 2,4,8,10‐tetranitro‐5H‐pyrido[3″,2″:4′,5′][1,2,3]triazolo[1′,2′:1,2][1,2,3]‐triazolo[5,4‐b]‐pyridin‐6‐ium inner salt ( 4 ) in good yields. Both isomers, ( 3 ) and ( 4 ), exhibited high thermal stability (differential scanning calorimetric analysis and thermal gravimetric analysis) and were insensitive to impact (hammer/anvil test).     

2-[4-(4-氟苄基)哌嗪-1-基甲基]吡唑并[1,5-a]吡啶的合成及其体外受体结合分析

以吡唑并[1,5-a]吡啶-2-甲醛和N-甲酰基哌嗪为原料,经过还原胺化反应、水解反应、N-烷基化反应,合成了2-[4-(4-氟苄基)哌嗪-1-基甲基]吡唑并[1,5-a]吡啶,总收率29.5%,用1HNMR、19FNMR、ESI-MS对中间体及目标化合物进行了结构表征,并通过体外受体结合实验,测定目标化合物对多巴胺D4受体的亲和常数为1.2nmol/L,对D2、D3受体的亲和常数分别为3 900、1 890 nmol/L,显示对多巴胺D4受体具有较高的亲和性与选择性,是一种潜在的多巴胺D4受体配基。     

磁性离子液体1-甲基-3-烷基咪唑四卤化铁盐的合成及其物性表征

合成了4种1-甲基-3-烷基咪唑四氯化铁盐[Cnmim]FeCl4(n=2, 4, 6, 8)及3种1-甲基-3-丁基咪唑四卤化铁([C4mim]FeX4, X=Cl, Br)磁性离子液体,光谱结果表明,[Cnmim]FeCl4及[C4mim]FeBr4中阴离子单一,而[C4mim]FeClBr3及[C4mim]FeCl3Br中的阴离子为FeBr4-, FeBr3Cl-, FeCl2Br2-, FeCl3Br-, FeCl4-的混合物. 测定了其密度、粘度、电导率,磁性离子液体密度较大,25℃时为1.25~1.94 g/cm3;粘度较小,25℃时为21~65 mPa×s;电导率较大,30℃时为0.23~1.37 S/m. 并研究了其物性随温度及结构的变化规律.     

Addition von α-Ketoenaminen an 2-Acetyl-p-benzochinon

Addition of α-Ketoenamines to 2-Acetyl-p-benzoquinone Addition of 2-morpholino-2-cyclohex-1-en-one 2 to 2-acetyl-quinone 1 yields benzo[c][4 H]chromen-4,7,10-trion 4 which is unstable and rearranges to 5. 4 is converted to 3-(2,5-dihydroxy-phenyl)-2-morpholino-2-cyclohex-1-en-on 3 thermically and to dibenzo[b,d]furan-4-on 7 acid catalyzed. The structure of 7 is secured by independent synthesis. Dibenzo[b,d]furan-4-on 14 is the product of reaction from 2-(p-toluidino)-2-cyclohex-1-en-on 9 and 1 with benzo[c][4 H]chromen-4,7,10-trion 10 as intermediate. By proton catalysis 5-acetyl-6-hydroxy-carbazol-1-on 13 and 4-oxo-cyclohexa[c]isochinolinium hydrochlorid 15 is obtained from 10 . 1 H-cyclopenta[d]furan-3-on 17 is formed by addition of 2-(p-toluidino)-2-cyclopent-1-en-on 16 to 1 . It is rearranged by proton catalysis to 3-oxo-1 H-cyclopenta[c]isochinolinium salt 18 . Reaction of cyclopentan-1,2-dione and 1 yields 3 aH-cyclopenta[c]isochromen-3,6,9-trion 20 , rearranging to 1 H-cyclopenta[b]benzo[d]furan-3-on 21 . The stereochemistry of adducts is discussed in connection with the course of the reaction, spectroscopical evidence, molecular modelling and calculation of HOMO/LUMO and AO-coefficients.     

Electrical conductivities for four ternary electrolyte aqueous solutions with one or two ionic liquid components at ambient temperatures and pressure

Thiswork provides amethod to explore the transport property of the electrolyte aqueous solutionswith one or two ionic liquids, especially focus on their electrical conductivity. The conductivities were measured for the ternary systems NaCl–[C₆mim][Cl] (1-hexyl-3-methylimidazolium chloride)–H₂O, [C₆mim][BF₄]–[C₆mim][Cl]–H₂O, NaNO₃–[C₆mim][BF₄](1-hexyl-3-methylimidazolium tetrafluoroborate)–H₂O, and [C₄mim][BF₄] (1-butyl-3- methylimidazolium tetrafluoroborate)–[C₆mim][BF₄]–H₂O, and their binary subsystems NaNO₃–H₂O, NaCl–H₂O, [C₆mim][BF₄]–H₂O, [C₆mim][Cl]–H₂O, and [C₄mim][BF₄]–H₂O, respectively. The conductivities of the ternary systems were also determined using generalized Young's rule and semi-ideal solution theory in terms of the data of their binary solutions. The comparison showed that the two simple equations provide good predictions for conductivity of mixed electrolyte solutions and the mixed ionic liquid solutions based on the conductivity of their binary subsystems.     

离子液体用于燃油萃取脱硫的选择与过程优化

针对基于COSMO-SAC模型分子设计方法的准确性问题,采用离子液体脱硫机理分析和实验的方法对其进行了验证,即对[HMIM] [BF₄]、[HMIM] [PF₆]、[BMIM] [BF₄]、[BMIM] [PF₆]、[EMIM] [BF₄]、[EMIM] [PF₆] 6种离子液体作萃取剂时的脱硫效果进行了脱硫机理的分析和实验的验证,得到的脱硫性能排序与离子液体分子设计结果基本一致,且均认为[HMIM] [PF₆]脱硫率较高。以[HMIM] [PF₆]为萃取剂,通过液相色谱法测定萃取后的液相组成,考察萃取时间、萃取温度、剂油比3个因素对脱硫率、分配系数和选择性系数的影响。通过正交实验设计确定了萃取时间40 min、萃取温度20℃、剂油比2：1为较优操作条件,单次脱硫率为72.74%,四级萃取可将模型油的含硫量由1200 μg·g^-1降至6.98 μg·g^-1,符合国Ⅴ标准。     

4H-[1]苯并吡喃[3,4-d]异噁唑-4-酮的合成(英文)

芳酰乙酸乙酯在乙氧基镁的作用下与取代的苯甲酰氯反应生成2-取代苯并吡喃酮。2-取代苯并吡喃酮和盐酸羟胺经Beckmann重排反应合成了4H-[1]苯并吡喃[3,4-d]异噁唑-4-酮。X衍射谱图表明,反应过程中表现区域选择性。对该反应的反应机理进行了初探。