稀土及铌微合金化Fe-3%Si无取向硅钢热变形行为的研究

针对稀土及铌微合金化Fe-3%Si无取向硅钢,在实验室利用Gleeble-1500D热模拟机进行了变形温度为900℃~1100℃、变形速率为0.001 s-1~5 s-1、变形量为60%的单道次热变形实验。分析了不同热变形条件下实验钢的应力-应变曲线以及变形组织,并计算了实验钢的热变形激活能Qd的值。实验结果表明,稀土及铌微合金化Fe-3%Si无取向硅钢在热变形过程中有部分再结晶晶粒出现在原始晶界以及晶界三角地带,但不同变形条件下的应力-应变曲线仍均为动态回复型;热变形激活能Qd分别为449.00 k J/mol、431.59 k J/mol,稀土及铌微合金化可以显著提高Fe-3%Si无取向硅钢热变形激活能,抑制动态再结晶的发生。     

Custom 450高强度不锈钢的动态再结晶行为

为了探究Custom 450钢的动态再结晶行为,采用Gleeble-3800热模拟试验机,在变形温度为1 050～1 200℃和应变速率为0.01～10 s~(-1)的变形条件下开展了单道次等温压缩试验。研究结果显示,在变形温度为1 050～1 200℃和应变速率为1.0～10 s~(-1)的变形范围内,钢虽发生了完全的动态再结晶,但应力应变曲线未表现出明显的应力峰值;钢的动态再结晶的晶粒尺寸随着变形温度的升高和应变速率的降低逐渐增大,当应变速率为0.01 s~(-1)时,动态再结晶晶粒发生长大。采用双曲正弦函数构建了Cutom 450钢的热变形方程,并建立了钢的动态再结晶动力学、临界应变、峰值应变及动态再结晶晶粒尺寸与Zener-Holloman参数的定量关系。     

Fe-28Mn-10Al-0.8C的热压缩行为及微观组织结构转变

通过Gleeble-3500热模拟机研究了铸态Fe-28Mn-10Al-0.8C低密度高强钢在850～1050℃温度范围和0.01～10 s^-1应变速率范围内的热压缩行为和组织转变。实验结果表明，Fe-28Mn-10Al-0.8C钢的动态回复(DRV)和动态再结晶(DRX)行为与变形温度、应变和应变速率直接相关。基于双曲正弦函数和线性拟合，实验钢的可用活化能(Q)为454.64 kJ/mol。给出了实验钢在热压缩变形过程中的组织演变和动态再结晶过程：变形温度的升高或应变速率的降低，可促进奥氏体的动态再结晶和晶粒长大；随着应变速率的增加，会得到更细小的奥氏体动态再结晶晶粒。     

904L不锈钢动态再结晶行为

采用单道次热压缩试验,研究了904L钢在不同变形温度、不同应变速率下的真应力-应变曲线以及组织形貌,阐明了热加工过程中热变形参数对其在变形过程中发生的动态再结晶行为及微观组织演变规律的影响,揭示了其相应的软化机制。结果表明:变形温度越高,流变应力越小,动态再结晶体积分数越高,晶粒尺寸越大;同温度下,变形速率越小,应力峰值越小,晶粒尺寸越大且晶界越平直化;904L钢的动态再结晶行为随着变形温度的升高,应变速率的减小,应变量的增大而进行得越充分且较高的变形温度有利于动态再结晶的进行。     

热变形对40CrMnMo钢的晶粒尺寸影响规律研究

采用了MMS-200热力模拟机以40CrMnMo钢为实验对象进行了热压缩试验,研究了变形温度850℃～1150℃,变形量0.8,应变速率在0.01～10s~(-1)条件下实验钢的热变形行为。通过分析高温下变形参数对流变应力和奥氏体晶粒尺寸的影响,建立40CrMnMo钢的稳态动态再结晶晶粒尺寸模型。结果表明:变形温度为850℃～1150℃,实验钢在应变速率0.01～0.1s~(-1)下发生连续动态再结晶,应变速率1～10s~(-1)下发生动态回复。通过引入Zener-Hollomon(Z)参数表征变形参数对稳态动态再结晶晶粒尺寸的影响,建立了稳态再结晶晶粒尺寸的数学模型,得出提高应变速率或变形温度较低能使Z参数增大,峰值应力升高且动态再结晶晶粒减小。     

904L不锈钢动态再结晶行为

采用单道次热压缩试验,研究了904L钢在不同变形温度、不同应变速率下的真应力-应变曲线以及组织形貌,阐明了热加工过程中热变形参数对其在变形过程中发生的动态再结晶行为及微观组织演变规律的影响,揭示了其相应的软化机制。结果表明:变形温度越高,流变应力越小,动态再结晶体积分数越高,晶粒尺寸越大;同温度下,变形速率越小,应力峰值越小,晶粒尺寸越大且晶界越平直化;904L钢的动态再结晶行为随着变形温度的升高,应变速率的减小,应变量的增大而进行得越充分且较高的变形温度有利于动态再结晶的进行。     

高强钢300M静态再结晶动力学研究

为研究高强钢300 M静态再结晶行为,采用Gleeble-3800型热模拟试验机对300M钢进行单/双道次热压缩试验.通过双道次热压缩试验分析了变形温度、应变速率、变形量和初始晶粒尺寸对静态再结晶体积分数的影响.变形温度越高,应变速率越大,变形量越大,初始晶粒尺寸越小,则静态再结晶体积分数越大.其中变形温度、变形量和应变速率对静态再结晶体积分数影响较大,初始晶粒尺寸的影响相比较小.基于双道次热压缩试验结果建立了300 M钢的静态再结晶体积分数模型,基于单道次热压缩试验结果建立了300 M钢完全静态再结晶晶粒尺寸模型,并验证了静态再结晶体积分数模型的正确性.      

高强度钢的动态再结晶行为研究

采用Gleeble1500热模拟实验机研究了高强度钢在不同条件下热变形时的动态再结晶行为以及晶粒尺寸的变化规律,确定了该钢的动态再结晶激活能为294096J/mol,建立了动态再结晶行为的数学模型,分析了变形工艺参数对再结晶行为以及晶粒尺寸的影响。变形温度和变形速率是影响动态再结晶的主要因素,一般在高的变形温度和小的变形速率下,动态再结晶才能发生。     

CSP热轧TRIP钢动态再结晶行为研究

摘要：采用Gleeble-3500热模拟试验机,在温度为950~1150℃、应变速率为0.1~10s-1和变形量为65%的条件下研究了CSP热轧TRIP钢的动态再结晶行为,探讨了初始奥氏体晶粒尺寸对TRIP钢动态再结晶行为的影响。研究结果表明,初始奥氏体晶粒尺寸越小,变形温度越高,应变速率越慢时,TRIP钢中奥氏体越易发生动态再结晶。其中,粗晶试样（初始奥氏体晶粒尺寸为767.54μm）在1050~1150℃内变形时,将发生动态再结晶。其热变形激活能为361539.17J/mol,确定了Zener-Holloman参数与应变速率和温度的关系式,建立了动态再结晶临界应变模型、高温奥氏体流动应力模型和动态再结晶晶粒尺寸模型,理论模拟结果与试验结果吻合较好。     

热变形对轴承钢G80T晶粒细化行为的影响

利用Gleeble-3800热模拟变形试验机,对高温轴承钢G80T的动态再结晶行为及相关力学性能进行了研究。通过对该钢在1 050℃下以10s-1的变形速率进行0%~70%的不同形变量的单道次压缩,研究了不同形变量下热变形钢的微观组织结构及硬度。结果表明:当形变量在20%时,无动态再结晶发生;当形变量达到40%时,热变形组织出现了部分的再结晶晶粒;随着形变量的进一步加大,再结晶晶粒数目增多,形变量达到60%后,形变组织形成了平均晶粒尺寸为2.8μm的完全再结晶组织。同时由于形变和晶粒尺寸大幅度细化,钢中的碳化物也随着形变量的增加而逐步减少。通过对压缩应力-应变曲线软化行为的分析,认为该钢的再结晶属于动态再结晶;在1 050℃进行60%的形变可以实现该钢的完全动态再结晶,将平均晶粒尺寸从原始的22μm细化到2.8μm,同时将钢的硬度从820 HV提高到895 HV。研究结果表明,动态再结晶是细化高温轴承钢G80T晶粒尺寸和提高性能的一种有效措施。     

China's Major Non-ferrous Metals Imports & Exports

正~~     

Zinc Production by Province in 2014

正~~     

80% of Chinese Firms Purchasing Overseas Mines Ended up in the Red

<正>Minmetals Resources acquired the world’s largest copper mine under construction for USD5.85 billion.One after another,listed companies Jien Nickle,China Molybdenum and Chihong Zinc and Germanium raised money to get involved in overseas mining projects…SOEs and private enterprises are engaged in a frenzy of overseas mine purchasing.A reporter with Economic     

Copper Processing Profit Dropped Sharply,Copper Consumption Will Face Impact in the Second Half of the Year

正Judging from China’s copper consumption field,the biggest consumption unit is electric power,which accounts for 47%of total consumption;it is followed by light industry sector,including household electrical appliance,machinery,durable goods and hardware etc,which accounts for 22%of total consumption;followed by transportation field,     

Central Geological Prospecting Fund Newly Added 16.47 Million Tonnes of Bauxite in 2013

正In 2013,the Central Geological Prospecting Fund(CGPF)Project newly discovered 15 ore fields,including 3 large above ore fields,and 5medium sized ore fields.The reporter learned from the recently published"Annual Report of Central Geological Prospecting Fund Project(2013)"that,from 2006 to 2013 the CGPF     

Manufacturers of Copper Tube for Central Air Conditioner Use Face Mounting Pressure in the Final Quarter of the Year

正This year,the investment growth rate of real estate industry continued to slow down,sold area of commercial housing also dropped significantly,which brought huge pressure to the domestic air conditioning manufactures.In the first half of the year,by relying on high growth in national financial expenditure,along with investment in public infrastructure     

Xinjiang Ranks No.1 in Production of Primary Aluminum in China

正Kang Yi,Honorary Chairman of China Nonferrous Metals Industry Association,said recently at the Forum on Development of the Non-ferrous Metals Industry in Central and Western China held in Zhengzhou that,as more and more electrolytic aluminum factories in Xinjiang came into operation,the electrolytic aluminum output of Xinjiang had reached2,275,000 tons in the first 7 months this year,     

Shenhuo Coal Industry and Electricity Power Completed800,000 t/a Aluminum Project in Xinjiang

正"Xinjiang project has been completed according to schedule,but total completion and total start of production are two different concepts,after completion it still needs a gradual process of reaching production target."On the morning of November 3,Shenhuo Coal Industry and Electricity Power told investors the above statement on the investor interaction platform.     

Guangdong Metal Transaction Center has Become the Second Largest Precious Metal Transaction Platform Nationwide

正The reporter learned from Guangdong Province Precious Metal Transaction Center that in 2013the Center maintained healthy development momentum,and had become the second largest precious metal transaction platform in China in terms of market size;currently Guangdong is quickening steps of financial innovation for the Center,aiming to build a transaction center with international core competitiveness.     

Seven Rare Earth Projects Involving Close to 3 Billion Yuan Investment Landed In the HighTech Zone

正On May 22,Baotou Rare Earth Industry Cooperation Consultation MeetingProject Agreement-signing Ceremony was held in Ningbo,nearly 40 enterprises from Ningbo,Guangdong,Hunan,and Shanxi participated in project consultation.After multi-lateral communication,agreements were signed for a total of 7 rare earth projects successfully.