High-energy neutron dosimetry with superheated drop detectors

A systematic analysis of the response of dichlorodifluoromethane superheated drop detectors was performed in the 46-133 MeV energy range. Experiments with quasi-monoenergetic neutron beams were performed at the Université Catholique de Leuvain-la-Neuve, Belgium and the Svedberg Laboratory, Sweden, while tests in a broad field were performed at CERN. To determine the response of the detectors to the high-energy beams, the spectra of incident neutrons were folded over functions modelled after the cross sections for the production of heavy ions from the detector elements. The cross sections for fluorine and chlorine were produced in this work by means of the Monte Carlo high-energy transport code HADRON based on the cascade exciton model of nuclear interactions. The new response data permit the interpretation of measurements at high-energy accelerators and on high-altitude commercial flights, where a 30-50% under-response had been consistently recorded with respect to neutron dose equivalent. The introduction of a 1 cm lead shell around the detectors effectively compensates most of the response defect.     

Superheated emulsions as high-energy neutron dosemeters

Superheated emulsions being inexpensive, easy to fabricate, and having tissue equivalent composition make them as one of the popular neutron dosemeters. One more advantage is that they can be made insensitive to gamma rays by the choice of the sensitive liquid. It is observed that the response of commercially available bubble detector to neutron decreases above 20 MeV while its response is roughly flat in the 0.1-15 MeV region. This restricts its application as a dosemeter to high-energy neutrons. The response of bubble detector from Bubble Technology Industries, has been observed by using Pb-breeder for high-energy neutrons from different facilities in Japan. It is observed that 2-3 cm Pb-breeder is effective in increasing the response of the detector to the nominal value. Theoretical calculation using MCNPX code indicates an increase in neutrons in the energy range of 0.1-10 MeV with Pb-breeder. The present work indicates the possibility of using the bubble detector as a dosemeter to high-energy neutron using a Pb-breeder of proper thickness.     

Neutron spectrometry in mixed fields: superheated drop (bubble) detectors

The BINS neutron threshold spectrometer permits the analysis of the main features of a neutron field for radiation protection purposes. The system offers a virtually complete photon discrimination and nested threshold responses to neutrons, which allow the use of very effective 'few-channel' unfolding procedures. To date, the practical operating energy range of a BINS is 0.1-10 MeV, over which a resolving power of 20-30% can be expected when the deconvolution is performed without explicit pre-information. Spectrum unfolding results in relatively high uncertainties on the differential fluence distributions, but due to negative correlations in adjacent energy groups the uncertainties on integral quantities such as dose equivalent are small and of the order of 5% to 10%, similar to the results of other active spectrometers. In comparison with most radiation detectors, the BINS is an extremely slow system due to the intrinsic duration of a bubble pulse and to the time associated with pulse analysis. For example, the maximum sustainable fluence rate of 1 MeV neutrons is about 10(4) cm(-2) s(-1), which is low for many neutron physics experiments. However, this rate corresponds to an ambient dose equivalent rate of about 1 mSv h(-1), making the active device adequate for radiation protection applications in the workplaces described in Section 1. There are ample margins for improvement of the spectrometer. In particular, in the low-energy region a thermal-epithermal neutron group may be added by using chlorine-bearing emulsions stabilised at suitable temperatures. In fact, the latest version of the system achieves this goal by using a single superheated emulsion of dichlorotetrafluoroethane (R-114) operated at temperatures up to 55 degrees C. This extends the range of the spectrometer and at the same time removes the undue enhancement of the UNFANA output in the low energy region. Above 10 MeV, the resolution can be improved by adding more thresholds, e.g. by starting from a lower initial temperature and using finer temperature increments. Based on neutron kinematics, the theoretical upper energy threshold which can be generated with superheated emulsions is greater than 100 MeV. However, this would most likely require refrigerating the detectors, while the current simpler approach is to operate the detectors at incremental temperature steps starting from the ambient temperature. A range that should be easily achieved in practice is from thermal energies to 20 MeV.     

Comparison doses of secondary neutron with the heavy ions in a 75-Mev/n heavy ion beam

The angular distributions for neutrons of energy >6 MeV that are induced by 75 MeV/n 12C6+ and 16O8+ ions were measured with the activation method of Al threshold detectors at the radiobiological terminal of HIRFL. The data were obtained by a high-purity Ge(HpGe) detector. The results show that the neutron angular distributions produced by heavy ion beams are strongly peaked in the forward direction and decreased exponentially with angles in experimental area. The experimental conditions for these measurements were similar to those for biological experiments, so the results should be representative of neutrons produced by heavy ions during the biological experiments and tumour therapy. Comparing with the neutron doses produced by the heavy ion beam, the heavy ion dose is the main factor in biological effects and tumour therapy response, so the contribution of neutron dose can be neglected.     

Development of advanced-type multi-functional electronic personal dosemeter

An advanced-type small, light, multi-functional electronic personal dosemeter has been developed using silicon semiconductor radiation detectors for dose management of workers at nuclear power plants and accelerator facilities. This dosemeter is 62 x 82 x 27 mm(3) in size and approximately 130 g in weight, which is capable of measuring personal gamma ray and neutron dose equivalents, Hp(10), simultaneously. The neutron dose equivalent can be obtained using two types of silicon semiconductors: a slow-neutron sensor (<1 MeV) and a fast-neutron sensor (>1 MeV). The slow neutron sensor is a 10 x 10 mm(2) p-type silicon on which a natural boron layer is deposited around an aluminium electrode. The fast neutron sensor is also a 10 x 10 mm(2) p-type silicon crystal on which an amorphous silicon hydride is deposited. The neutron energy response corresponding to the fluence-to-dose-equivalent conversion coefficient given by ICRP Publication 74 has been evaluated using a monoenergetic neutron source from 250 keV to 15 MeV at the Fast Neutron Laboratory of Tohoku University. As the result, the Hp(10) response to neutrons in the energy range of 250 keV and 4.4 MeV within +/-50% difference has been obtained.     

Nuclear recoil measurements in Superheated Superconducting Granule detectors

The response of Superheated Superconducting Granule (SSG) devices to nuclear recoils has been explored by irradiating SSG detectors with a 70MeV neutron beam. In the past we have tested Al SSG and more recently, measurements have been performed with Sn and Zn detectors. The aim of the experiments was to test the sensitivity of SSG detectors to recoil energies down to a few keV. In this paper, the preliminary results of the neutron irradiation of a SSG detector made of Sn granules 15–20µm in diameter will be discussed. For the first time, recoil energy thresholds of 1keV have been measured.     

PIN silicon diode fast neutron detector

Two batches of diodes, with different structural ratios (the ratio of area and thickness), were made using different manufacturing processes. The energy response of the first batch to 15 kinds of monoenergetic neutrons ranging from 180 keV to 17.56 MeV was tested, and the neutron source response of both batches to 239Pu-Be neutron source was measured. The energy deposition in the diodes irradiated by 1 keV to 20 MeV monoenergetic neutrons was calculated with simulation procedure. The response curve of the experimental results showed an approximately similar trend to that of theoretical computation. Based on the results of the neutron source response experiments, it was concluded that the response of fast neutron varied linearly with the structural ratio of the detectors.     

Measurement of neutron inelastic scattering cross sections for 52Cr from threshold up to 18 MeV

The powerful white neutron spectrum from Gelina is used for the investigation of gamma ray production cross sections in the reaction 52Cr(n,n'gamma)52Cr. The gamma rays from the inelastic process are detected with two large volume HPGe detectors placed at 110 degrees and 150 degrees with respect to the beam direction. The neutron flux has been measured with a 235U fission chamber. For the main transitions the inelastic cross section is given with an incident neutron energy resolution ranging from 1.12 keV at 1 MeV to 35.7 keV at 10 MeV, the overall statistical error being <5%. Based on the known 52Cr level scheme, the level and total inelastic cross sections have been obtained up to 3.77 MeV excitation energy. Progress on the implementation of a new acquisition system based on a fast digitiser is presented in this paper.     

Hardness ratios of different neutron spectra

Extensive data have been gathered in the past on the response of different detectors, based on the registration of neutron-induced fissions in bismuth, gold, tantalum and thorium by the spark-replica counter and the thin film breakdown counter. These detectors make it possible to exploit the excellent characteristics of the fission reactions for the measurements of high-energy neutrons. Most of the investigations have been carried out at the quasi-monoenergetic neutron beam facility at The Svedberg Laboratory-TSL of the Uppsala University in cooperation with the Khlopin Radium Institute (KRI). The responses of different fission detectors in the neutron energy range 35-180 MeV have been evaluated: a region where the predictive power of available nuclear reaction models and codes is not reliable yet. For neutron energy >200 MeV, the fission-detector responses have been derived from the data of the proton fission cross sections. By using the ratio of the responses of these detectors, a simple and accurate way to evaluate the spectrum hardness can be obtained, thus providing a tool to obtain spectral information needed for neutron dosimetry without the need to know the entire spectrum. Extensive data have been already obtained for the high-energy neutron spectrum from the CERN concrete facility. In the present paper, the measured values of the response ratios for different fissile detectors exposed at the CERN facility are compared with those calculated for the spectra from the same facility and from different altitudes in the atmosphere, respectively.     

Proton-recoil detectors for time-of-flight measurements of neutrons with kinetic energies from some tens of keV to a few MeV

For experiments at the superconducting electron accelerator ELBE, where neutrons in the kinetic energy region from some tens of keV to a few MeV will be produced by bremsstrahlung, neutron-time-of-flight detectors have been developed. These detectors are made from the plastic scintillator material EJ-200. Efficiency calibration showed more than 10% efficiency for kinetic energies down to 30 keV. The calibration was done at the “accelerator facility for fast neutron research” at Physikalisch-Technische Bundesanstalt in Braunschweig, using pulsed quasi-monoenergetic neutron fields with a well-determined fluence. The low detection threshold was obtained by coincident readout of two Hamamatsu R2059-01 photomultiplier tubes per scintillator and by triggering just below the single-photo-electron peak of these photomultiplier tubes, which additionally gives a well-reproduceable detection threshold.     

Evaluation of solid state nuclear track detector stacks exposed on the international space station

The aim of the study was to investigate the contribution of secondary neutrons to the total dose inside the International Space Station (ISS). For this purpose solid-state nuclear track detector (SSNTD) stacks were used. Each stack consisted of three CR-39 sheets. The first and second sheets were separated by a Ti plate, and the second and third sheets sandwiched a Lexan polycarbonate foil. The neutron and proton responses of each sheet were studied through MC calculations and experimentally, utilising monoenergetic protons. Seven stacks were exposed in 2001 for 249 days at different locations of the Russian segment 'Zvezda'. The total storage time before and after the exposure onboard was estimated to be seven months. Another eight stacks were exposed at the CERF high-energy neutron field for calibration purposes. The CR-39 detectors were evaluated in four steps: after 2, 6, 12 and 20 h etching in 6 N NaOH at 70 degrees C (VB = 1.34 microm h(-1)). All the individual tracks were investigated and recorded using an image analyser. The stacks provided the averaged neutron ambient dose equivalent (H*) between 200 keV and 20 MeV, and the values varied from 39 to 73 microSv d(-1), depending on the location. The Lexan detectors were used to detect the dose originating from high-charge and high-energy (HZE) particles. These results will be published elsewhere.     

LET dependence of bubble detector response to heavy ions

A series of experiments have been recently performed at the Heavy Ion Medical Accelerator in Chiba (HIMAC) laboratory to study the response of bubble detectors to high-mass high-energy (HZE) particles. The motivation for this study was to improve our ability to interpret measurements of neutron energy spectra in space. A recent analysis showed that emulsions of light halocarbons display common properties when they are characterised by a quantity called 'reduced superheat'. This quantity evolved from the examination of neutron and gamma responses of many types of detectors. In this study, we describe direct irradiations with N, Ar and Kr charged particles at HIMAC. It was observed that when the linear energy transfer (LET) corresponding to bubble formation was plotted vs. reduced superheat, different curves were obtained for a particular ion for detectors at different temperatures. Different curves were also obtained when data from different ions were plotted. These results confirm that bubble nucleation is not a simple function of particle LET and that an analysis based on track-structure appears warranted.     

Measurement of the fluence response of the GSI neutron ball dosemeter in the energy range from thermal to 19 MeV

At high-energy particle accelerators, area monitoring needs to be performed in a wide range of neutron energies. In principle, neutrons occur from thermal energies up to the energy of the accelerated ions, which is for the present GSI (Gesellschaft für Schwerionenforschung) accelerator facility approximately 1-2 GeV per nucleon. There are no passive dosemeters available, which are designed for the use at high-energy accelerators. At GSI, a neutron dosemeter was developed, which is suitable for the measurement of high-energy neutron radiation by the insertion of a lead layer around Thermoluminescence (TL) detection elements (pairs of TL 600/700) at the centre of the dosemeter. The design of the sphere was derived from the construction of the extended range rem-counters for the measurement of ambient dose equivalent H(10). In this work, the dosemeter fluence response was measured in the quasi-monoenergetic neutron fields of the accelerator facility of the PTB in Braunschweig and in the thermal neutron field of the GKSS research reactor FRG-1 in Geesthacht. For the accelerator measurements, the reactions (7)Li(p,n)(7)Be, (3)H(p,n)(3)He and (2)H(d,n)(3)He were used to produce neutron fields with energy peaks between 144 keV and 19 MeV. The measured fluence responses are 27% too low for thermal energies and show an agreement with approximately 14% for the accelerator produced neutron fields related to the computed fluence responses (MCNP, FLUKA calculations). The measured as well as the computed fluence responses of the dosemeter are compared with the corresponding conversion coefficients.     

The performance evaluation of gamma- and neutron-sensitive superheated emulsion (bubble) detectors

The superheated emulsion (bubble) detectors have been developed at Defence Laboratory, Jodhpur (DLJ), India, for measurement of gamma doses. The developed detectors have been tested at Radiation Safety and System Division (RSSD), Bhabha Atomic Research Center (BARC), Mumbai (India) and DLJ having ISO-17025 accredited facility for testing and calibration of Radiation Monitors. A series of experiments were conducted to determine the gamma and neutron sensitivity of these detectors, i.e. batch homogeneity, reproducibility, dose equivalent rate effect, gamma/neutron dose equivalent response, gamma/neutron energy response and change in gamma sensitivity as a function of temperature. All the results were within +/- 20% of themselves. It is observed that the response of the detector is dependent upon temperature. The recommended ideal working temperature range of the detector is 20-28 degrees C, but a temperature correction is required beyond approximately 30 masculineC. The temperature compensation may be possible up to 45 degrees C in improved version using specially prepared reversible thermo-sensitive polymer gel. The detector may have applications in radio-diagnosis, R&D laboratories, and health physics as well as an indicator of gamma radiation for dirty bomb to be useful for first responder in any radiological emergency.     

Estimation of response functions of moderating type neutron detectors by the time-of-flight method combined with a large lead pile

The energy dependent response functions of moderating type neutron detectors having cylindrical polyethylene moderators of 1, 3, 6 and 10 cm thicknesses were determined using the time-of-flight (TOF) technique. By combining the 35 MeV electron linear accelerator with a large lead pile of about 150 t, a pulsed neutron field which is rich in intermediate neutrons was formed and its spectrum at the standard measuring point for the TOF experiment was measured by a Li glass scintillator. In this kind of TOF, the neutron time delay in the polyethylene moderator due to multiple collisions with hydrogen was evaluated by the time dependent neutron transport Monte Carlo code, and compiled to the time response matrix. By using the neutron spectrum at the standard measuring point and the time response matrix, the energy dependent response functions of the moderating type neutron detectors were determined from the measured time spectra for the first time in a considerably wide energy range from a few eV to about 50 keV. The experimental response functions showed good agreement with the calculated results.     

The CERN-EU high-energy reference field (CERF) facility for dosimetry at commercial flight altitudes and in space

A reference facility for the calibration and intercomparison of active and passive detectors in broad neutron fields has been available at CERN since 1992. A positively charged hadron beam (a mixture of protons and pions) with momentum of 120 GeV/c hits a copper target, 50 cm thick and 7 cm in diameter. The secondary particles produced in the interaction traverse a shield, at 90 degrees with respect to the direction of the incoming beam. made of either 80 to 160 cm of concrete or 40 cm of iron. Behind the iron shield, the resulting neutron spectrum has a maximum at about 1 MeV, with an additional high-energy component. Behind the 80 cm concrete shield, the neutron spectrum has a second pronounced maximum at about 70 MeV and resembles the high-energy component of the radiation field created by cosmic rays at commercial flight altitudes. This paper describes the facility, reports on the latest neutron spectral measurements, gives an overview of the most important experiments performed by the various collaborating institutions over recent years and briefly addresses the possible application of the facility to measurements related to the space programme.     

Characteristic response of plastic track detectors to 40-80 MeV neutrons

This paper investigates the characteristic response of plastic track detectors to high-energy neutrons. Three types of plastic nuclear track detector (PNTD), Baryotrak made of pure CR-39, TD-1 made of CR-39 containing an antioxidant and TNF-1 made of a copolymer of CR-39/N-isopropylacrylamide, were exposed in quasi-monoenergetic neutron fields generated by p-Li reactions. The total efficiencies for TD-1 and TNF-1 were more than double and triple that of Baryotrak respectively. In addition, the species of particles were classitied into three groups, i.e. proton relatives, alpha particles and heavy ions, by analysing the etch-pit growth curve obtained by step-by-step etching. In a 65 MeV neutron field about half of the tracks recorded in pure CR-39 were due to heavy ions, whereas the TNF-1 detector could effectively register the protons, accounting for 70% of the tracks. The results could be explained by the difference in the sensitivity to high-energy protons.     

Improved characterisation of the HPA PADC neutron personal dosemeter

The fast neutron energy dependence of response of the HPA PADC neutron personal dosemeter has been measured from 144 keV to 19 MeV using monoenergetic neutron fields. Below 144 keV the relative energy and angle dependence of response have been determined using MCNP-4C2. New data from the SIGMA field at Cadarache, France, have been used to determine the appropriate scaling factor for the calculated response to thermal and intermediate energy neutrons. These newly determined response characteristics of the dosemeter are discussed with respect to its performance in the EVIDOS workplace field irradiations.     

Evaluation of large deuterated scintillators for fast neutron detection (E=0.5-20 MeV) using the D(d,n)He, C(d,n) and Al(d,n) reactions

The response of large deuterated liquid scintillators (up to 10 cm diameter by 15 cm) to neutrons 0.5-20 MeV has been studied using the 2.5 MeV neutron generator at the University of Michigan, and the d(d,n), ¹³C(d,n), ²⁷Al(d,n) and other reactions at the University of Notre Dame FN tandem accelerator. The latter utilize 9 and 16 MeV deuteron beams including a pulsed beam, which permitted time-of-flight measurements. Combining pulse-shape discrimination and time-of-flight allows gating on specific neutron energy groups to determine the detector response to specific neutron energies. This will permit accurate simulation of the detector response functions for applications of these detectors in nuclear research and homeland security applications.     

A study of neutron radiation quality with a tissue-equivalent proportional counter for a low-energy accelerator-based in vivo neutron activation facility

The accelerator-based in vivo neutron activation facility at McMaster University has been used successfully for the measurement of several minor and trace elements in human hand bones due to their importance to health. Most of these in vivo measurements have been conducted at a proton beam energy (E(p)) of 2.00 MeV to optimise the activation of the selected element of interest with an effective dose of the same order as that received in chest X rays. However, measurement of other elements at the same facility requires beam energies other than 2.00 MeV. The range of energy of neutrons produced at these proton beam energies comes under the region where tissue-equivalent proportional counters (TEPCs) are known to experience difficulty in assessing the quality factor and dose equivalent. In this study, the response of TEPCs was investigated to determine the quality factor of neutron fields generated via the (7)Li(p, n)(7)Be reaction as a function of E(p) in the range 1.884-2.56 MeV at the position of hand irradiation in the facility. An interesting trend has been observed in the quality factor based on ICRP 60, Q(ICRP60), such that the maximum value was observed at E(p)=1.884 MeV (E(n)=33±16 keV) and then continued to decline with increasing E(p) until achieving a minimum value at E(p)=2.0 MeV despite a continuous increase in the mean neutron energy with E(p). This observation is contrary to what has been observed with direct fast neutrons where the quality factor was found to increase continuously with an increase in E(p) (i.e. increasing E(n)). The series of measurements conducted with thermal and fast neutron fields demonstrate that the (14)N(n, p)(14)C produced 580 keV protons in the detector play an important role in the response of the counter under 2.0 MeV proton energy (E(n) ≤ 250 keV). In contrast to the lower response of TEPCs to low-energy neutrons, the quality factor is overestimated in the range 1-2 depending on beam energy <2.0 MeV. This study provides an insight to understanding the response of TEPCs in low-energy neutron fields where the neutrons are moderated using a polyethylene moderator.