Synthesis and characterization of photopolymerizable hydrogels based on poly (ethylene glycol) for biomedical applications

Hydrogels are polymeric materials widely used in medicine due to their similarity with the biological components of the body. Hydrogels are biocompatible materials that have the potential to promote cell proliferation and tissue support because of their hydrophilic nature, porous structure, and elastic mechanical properties. In this work, we demonstrate the microwave-assisted synthesis of three molecular weight varieties of poly(ethylene glycol) dimethacrylate (PEGDMA) with different mechanical and thermal properties and the rapid photo of them using 1-hydroxy-cyclohexyl-phenyl-ketone (Irgacure 184) as UV photoinitiator. The effects of the poly(ethylene glycol) molecular weight and degree of acrylation on swelling, mechanical, and rheological properties of hydrogels were investigated. The biodegradability of the PEGDMA hydrogels, as well as the ability to grow and proliferate cells, was examined for its viability as a scaffold in tissue engineering. Altogether, the biomaterial hydrogel properties open the way for applications in the field of regenerative medicine for functional scaffolds and tissues.     

Hemocompatibility, swelling and thermal properties of hydrogels based on 2-hydroxyethyl acrylate, itaconic acid and poly(ethylene glycol) dimethacrylate

Two series of novel hydrogels, based on 2-hydroxyethyl acrylate (HEA), itaconic acid (IA), and two poly(ethylene glycol) dimethacrylates (PEGDMA), of different ethylene glycol chain lengths, were prepared by free radical crosslinking copolymerization. The influence of different ethylene glycol chain lengths and concentration in P(HEA/IA/PEGDMA) hydrogels on biocompatibility, swelling and thermal properties was investigated. All samples in contact with blood showed a mean hemolysis value <1.0 % in the direct contact assay, and even <0.5 % in the indirect contact assay, for in vitro testing conditions. Swelling studies, conducted in a physiological pH and temperature range, showed pH sensitivity and relatively small changes of equilibrium swelling with temperature, which varied with PEGDMA molecular weight. The glass transition temperatures (T _g) of P(HEA/IA/PEGDMA) networks were in the range 28.1–36.9 °C, respectively, and also dependent on copolymer composition. Due to good biocompatibility, favorable swelling, and thermal properties these hydrogels show good potential for biomedical uses.     

New hybrid system: Poly(ethylene glycol) hydrogel with covalently bonded pegylated nanotubes

Hydrogels containing carbon nanotubes (CNTs) are expected to be promising conjugates because they might show a synergic combination of properties from both materials. Most of the hybrid materials containing CNTs only entrap them physically, and the covalent attachment has not been properly addressed yet. In this study, single‐walled carbon nanotubes (SWNTs) were successfully incorporated into a poly(ethylene glycol) (PEG) hydrogel by covalent bonds to form a hybrid material. For this purpose, SWNTs were functionalized with poly(ethylene glycol) methacrylate (PEGMA) to obtain water‐soluble pegylated SWNTs (SWNT–PEGMA). These functionalized SWNTs were covalently bonded through their PEG moieties to a PEG hydrogel. The hybrid network was obtained from the crosslinking reaction of poly(ethylene glycol) diacrylate prepolymer and the SWNT–PEGMA by dual photo‐UV and thermal initiations. The mechanical and swelling properties of the new hybrid material were studied. In addition, the material and lixiviates were analyzed to elucidate any kind of SWNT release and to evaluate a possible in vitro cytotoxic effect. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Construction and Properties of Double-Crosslinked Hydrogels Based on Host–Guest Interactions/UV Polymerization

Supramolecular hydrogels based on host–guest interactions have inherent flaw that the host molecules easily slide on or fall off the linear guest molecules, causing collapse of the networks. Hence, a double-crosslinking strategy is introduced in this study. The primary crosslinking formed via host–guest interactions between α-cyclodextrin (α-CD) and poly(ethylene glycol) dimethacrylate (PEGDMA) or between α-CD and four-arm poly(ethylene glycol) methacrylate (4arm PEG-MA). Then, secondary networks among PEGDMA or 4arm PEG-MA formed via UV-induced crosslinking. Results show that the fracture stress and fracture strain of PEGDMA-α-CD double-crosslinked hydrogels (P-C-U) increases up to 0.63 MPa and 71%, respectively, which significantly affected by molecular weight of PEGDMA. The double-crosslinking strategy helps increase the toughness up to 12.9 MJ m⁻³ (P_6k-0.025M-C-U) and 17.23 MJ m⁻³ (4P_10k-0.025M-C-U), as well as impart a certain degree of fatigue resistance to both PEGDMA hydrogels and 4arm-PEG-MA hydrogels, which is believed to be due to the energy dissipation mechanism introduced in the structure. The swelling capacity of double-crosslinked hydrogels is decreased compared to that with single-UV-crosslinked hydrogels, may be because the double-crosslinking strategy increases the crosslinking density of the hydrogel structure. In addition, both the molecular weight and concentration of PEGDMA and 4arm-PEG-MA influences the swelling capacity of the double-crosslinked hydrogels.     

Study on the biocomposites with poly(ethylene glycol) dimethacrylate and surfaced‐grafted hydroxyapatite nanoparticles

In composites of hydroxyapatite (HA) nanoparticles with a polymer matrix, the aggregation of nanoparticles would induce structural defects. In order to improve the dispersibility of HA nanoparticles in poly(ethylene glycol) dimethacrylate (PEGDMA) matrix and enhance mechanical properties of the HA/PEGDMA composite as potential bone substitute material, surface‐grafted HA nanoparticles with poly(ethylene glycol) monomethacrylate (PEGMA) were prepared, and crosslinked with PEGDMA under UV light to form a composite. The structure of HA‐g‐PEGMA was characterized by X‐ray diffraction (XRD) and thermal gravimetric analysis (TGA). The dispersibility of HA‐g‐PEGMA nanoparticles in poly(PEGDMA) was evaluated by SEM. The mechanical properties of the composites were investigated by compressive test. The dispersibility of HA‐g‐PEGMA nanoparticles in poly(PEGDMA) matrix was better than the bare HA. At a 1 wt % content of loading, the strength of composites increased by 14%, and the modulus increased by 9%. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and properties of modified PHEMA hydrogel with sulfonated PEG graft

A novel poly(ethylene glycol) (PEG) macromer with a methacryloyl and sulfonic acid group at each end of the chain was prepared. Modified hydroxyethyl methacrylate (HEMA) based hydrogels were synthesized by crosslinking polymerization of HEMA in the presence of the above‐mentioned PEG macromer. The effect of the sulfonated PEG graft was examined by comparing the swelling properties with those of a pure poly(hydroxyethyl methacrylate) (PHEMA) hydrogel. The modified PHEMA hydrogel exhibited increasing water absorbency with increasing sulfonated PEG content up to 15 wt %. These hydrogels with the sulfonated PEG graft exhibited a more hydrophilic character than the pure PHEMA gel. Also the swelling degree varied slightly with pH, showing increased swelling at higher pH probably due to the presence of the anionic sulfonate group on the PEG end chain. In addition, the protein adsorption test showed a lower level of fibrinogen adsorption from the sulfonated poly(ethylene glycol) (SPEG) modified gel than on the homo PHEMA hydrogel. Interestingly, scanning electron microscopy showed that the porous and rather uniform morphology of the gels changed with increasing sulfonated PEG content in PHEMA. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2484–2489, 2007     

Modulating properties of chemically crosslinked PEG hydrogels via physical entrapment of silk fibroin

A variety of polymers of synthetic origins (e.g., poly(ethylene glycol) or PEG) and macromolecules derived from natural resources (e.g., silk fibroin or SF) have been explored as the backbone materials for hydrogel crosslinking. Purely synthetic PEG‐based hydrogels are often chemically crosslinked to possess limited degradability, unless labile motifs are designed and integrated into the otherwise non‐degradable macromers. On the other hand, SF produced by Bombyx mori silkworm can be easily formulated into physical hydrogels. These physical gels, however, are less stable than the chemically crosslinked gels. Here, we present a simple strategy to prepare hybrid PEG‐SF hydrogels with chemically crosslinked PEG network and physically entrapped SF. Visible light irradiation initiated rapid thiol‐acrylate gelation to produce a network composed of non‐degradable poly(acrylate‐co‐NVP) chains, hydrolytically labile thioether ester bonds, and interpenetrating SF fibrils. We evaluated the effect of SF entrapment on the crosslinking efficiency and hydrolytic degradation of thiol‐acrylate PEG hydrogels. We further examined the effect of adding soluble SF or sonicated SF (S‐SF) on physical gelation of the hybrid materials. The impacts of SF or S‐SF inclusion on the properties of chemically crosslinked hybrid hydrogels were also studied, including gel points, gel fraction, equilibrium swelling ratio, and mesh size. We also quantified the fraction of SF retention in PEG hydrogels, as well as the influence of remaining SF on moduli and degradation of chemically crosslinked thiol‐acrylate PEG hydrogels. This simple hybrid hydrogel fabrication strategy should be highly useful in future drug delivery and tissue engineering applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43075.     

Effect of porosigen on the swelling behavior and drug release of porous N‐isopropylacrylamide/poly(ethylene glycol) monomethylether acrylate copolymeric hydrogels

A series of porous thermoreversible hydrogels were prepared from N‐isopropylacrylamide (90 mol %) and poly(ethylene glycol) methylether acrylate (10 mol %), which was derived from poly(ethylene glycol) monomethylether, N,N′‐methylenebisacrylamide, and porosigen, or poly (ethylene glycol) (PEG) with different molecular weights (MWs). The influence of pore volume in the gel on the physical properties, swelling kinetics, and solute permeation from these porous gels was investigated. The results show that the surface areas, pore volumes, and equilibrium swelling ratios for the porous gels increased with increasing MW of PEG, but the shear moduli and effective crosslinking densities decreased with increasing MW of PEG. The results from the dynamic swelling kinetics show that the transport mechanism was non‐Fickian. The diffusion coefficients of water penetrating into the gels increased with increasing pore volume of the gels. In addition, we also studied solute permeation through the porous gel controlled by temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5490–5499, 2006     

Gamma radiation synthesis and swelling properties of hydrogels based on poly(ethylene glycol)/methacrylic acid (MAc) mixtures

In this work, gamma radiation was used to prepare hydrophilic hydrogels based on different mass ratios of poly(ethylene glycol) (PEG) and methacrylic acid (MAc) monomer. The thermal stability of hydrogels was characterized thermogravimetric analysis (TGA). The effect of temperature and pH, as external environments, on the equilibrium swelling of PEG/MAc hydrogels was also studied. The results showed that the gel fraction of PEG/MAc hydrogels is lower than that of PMAc hydrogel, in which the gel fraction of PMAc hydrogel was decreased greatly with increasing the mass ratio of PEG polymer in the initial solutions. The results showed that PEG/MAc hydrogels reached the equilibrium swelling state in water after 6 hours. It was found that the equilibrium swelling of PEG/MAc hydrogels displayed a transition change within the temperature range 30–40°C. This change in equilibrium swelling was illustrated by differential scanning calorimetry (DSC). However, it was observed that the equilibrium swelling of PEG/MAc hydrogels increases progressively with increasing the pH value from 4 up to 8. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Behavior of semi IPN hydrogels composed of PEG and AAm/SMA copolymers in swelling and uptake of Janus Green B from aqueous solutions

Semi-interpenetrating polymer network (semi IPN) hydrogels of poly(ethylene glycol; PEG) were prepared as a water adsorbent for dye (Janus Green B) sorption. For this, PEG and copolymer of acrylamide/sodium methacrylate (AAm/SMA) were prepared by polymerization of aqueous solution of acrylamide (AAm), sodium methacrylate (SMA) using ammonium persulfate (APS)/N,N,N′,N′-tetramethylethylenediamine (TEMED) as redox initiating pair in presence of PEG and poly(ethylene glycol)dimethacrylate (PEGDMA) as crosslinker. FTIR spectroscopy was used to identify the presence of different repeating units in the semi IPNs. Some swelling and diffusion characteristics were calculated for different semi IPNs and hydrogels prepared under various formulations. Water uptake and dye sorption properties of AAm/SMA hydrogels and AAm/SMA/PEG semi IPNs were investigated as a function of chemical composition of the hydrogels. Janus Green B have used in sorption studies. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Designing crosslinked hyaluronic acid hydrogels with tunable mechanical properties for biomedical applications

This study develops a simple copolymerization/crosslinking technique to control the swelling and mechanical properties of hyaluronic acid‐based hydrogels. Because of the widespread acceptance of poly(ethylene glycol) in biomedical applications, functionalized oligomers of ethylene glycol (EG) were used as comonomers to crosslink methacrylated hyaluronic acid (MHA). The swelling degree, shear and elastic moduli, and fracture properties (stress and strain) of the gels were investigated as a function of the crosslinking oligomer length and reactive group(s). It was hypothesized that acrylated oligomers would increase the crosslink density of the gels through formation of kinetic chains by reducing the steric hindrances that otherwise may limit efficient crosslinking of hyaluronic acid into gels. Specifically, after crosslinking 13 wt % MHA (47% degree of methacrylation) with 0.06 mol % of (EG)_n‐diacrylate, the swelling ratio of the MHA gel decreased from 27 to 15 g/g and the shear modulus increased from 140 to 270 kPa as n increased from 1 to 13 units. The length and functionality (i.e., acrylate vs. methacrylate) of the oligomer controlled the crosslink density of the gels. The significant changes in the gel properties obtained with the addition of low levels of the PEG comonomer show that this method allows precise tuning of the physical properties of hyaluronic acid (HA) gels to achieve desired target values for biomedical applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42009.     

Immobilization of myoglobin from horse skeletal muscle in hydrophilic polymer networks

This work examines the immobilization of myoglobin from horse skeletal muscle in hydrophilic polymer networks. Due to specific changes in the spectroscopic properties of hemoproteins during ligand binding, they could be employed in optical sensing devices. Two immobilization techniques were considered: imbibition and entrapment. Anionic hydrogels composed of methacrylic acid (MAA), cationic hydrogels composed of dimethylamino ethyl methacrylate (DMAEM), and neutral hydrogels composed of poly(ethylene glycol) monomethyl ether monomethacrylate (PEGMA; molecular weight = 200, 400, or 1000), all crosslinked with poly(ethylene glycol) dimethacrylate (PEGDMA) (molecular weight = 200, 600, or 1000), were synthesized by free‐radical solution polymerization. By the imbibition method, MAA‐based hydrogels incorporated the highest amount of myoglobin in comparison with PEGMA or DMAEM polymers. The evaluation of the correlation length of the networks revealed that MAA hydrogels had the highest correlation length in comparison with PEGMA‐containing matrices or DMAEM hydrogels. Release experiments from MAA hydrogels at pHs 5.8 and 7.0 showed that the solute‐transport mechanism was a combination of Fickian and chain relaxation diffusion. Myoglobin‐loaded MAA hydrogels retained their heme reactivity after the immobilization process. The release of myoglobin incorporated by entrapment in MAA–PEGDMA hydrogels was highly influenced by the chain relaxation process. The diffusion coefficients of myoglobin incorporated by entrapment into anionic hydrogels were 2 orders of magnitude smaller (～ 10–13) than those for myoglobin incorporated by imbibition (10–11), both evaluated at pH 7.0. Substrate binding studies indicated that the protein biological activity was not compromised in those hydrogels loaded by the imbibition method, whereas prepolymeric solutions showed detrimental effects on protein stability. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Crosslinking behaviors and mechanical properties of curable PDMS and PEG films with various contents of glycidyl methacrylate

The real-time curing behaviors and surface mechanical properties of two curable systems, polydimethylsiloxane (PDMS) and poly(ethylene glycol) (PEG) films containing different portions of glycidyl methacrylate (GMA), were investigated via various measurements for potential application as anti-fouling coatings. In these mixtures, methacryloxypropyl-terminated PDMS and poly(ethylene glycol)dimethacrylate were used as the difunctional crosslinkers, and GMA was employed as the epoxy component. During the coating process, UV irradiation generated network structures for both mixtures (PDMS-GMA and PEG-GMA), while they exhibited the different evolution of the elastic modulus with respect to the GMA content. It was found that a small portion of the crosslinkers formed at early stage has a dominant contribution to the overall film properties, leading to a small swelling ratio and large gel fraction. The indentation and scratch mechanical properties of the cured films were qualitatively well linked with the real-time rheological data for the curable mixtures acquired during the curing process. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47088.     

Preparation and Gel Properties of Poly[hydroxyethylmethacrylate-co-poly(ethylene glycol) methacrylate] Copolymeric Hydrogels by Photopolymerization

Copolymeric hydrogels based on 2-hydroxyethyl methacrylate (HEMA) and poly(ethylene glycol) methacrylate (PEGMA) and isopropanol as a diluent were prepared by photopolymerization. The swelling kinetics, mechanical properties, drug release behaviors, and the interaction between various drugs and the present copolymeric gels were investigated in this study. The results showed that the addition of PEGMA could effectively increase the equilibrium water content and the diffusion coefficient and penetration velocity of water though the gels. Although Young's modulus increased with the increase of PEGMA content, the resulting gels had smaller elongation and more brittle characteristics. The drug release behavior was strongly dependent on the interaction between the present copolymeric gels and drugs such as caffeine, crystal violet (CV), phenol red, and vitamin B₁₂.     

Temperature and pH sensitive hydrogels composed of chitosan and poly(ethylene glycol)

Summary Chitosan based semi-interpenetrating polymer network (semi-IPN) hydrogels containing different amounts of poly(ethylene glycol) (PEG) were prepared. The crosslinking of the hydrogels was achieved by using a naturally occurring nontoxic cross-linking agent genipin. The swelling behaviour of these hydrogels was studied by immersing the films in deionized water at 25, 37 and 45 °C and in media of different pHs at 37 °C. Swelling was found to be dependent on temperature, pH of the medium and the amount of PEG in the gel. States of water in the hydrogels swollen in deionized water at 37 °C were determined using Differential Scanning Calorimetry (DSC). The equilibrium water content and the amount of freezing water in the swollen hydrogels increased with the increase in PEG concentration in the gels.     

UV photopolymerized hydrogels with β-cyclodextrin moieties

Hydrophilic hydrogels based on poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) block copolymers have potential applications in drug delivery, tissue engineering and other biomedical devices due to their excellent biocompatibility and environmental sensitivity. However, they also exhibit some shortcomings in terms of swelling and mechanical properties as well as affinity for water-insoluble or hydrophobic drug molecules. To address these limitations, new polymeric hydrogels with β-cyclodextrin moieties were prepared by UV photo-polymerization of maleic anhydride-substituted β-CD (MAH-CD) and the block copolymer macromer from Pluronic F68 and poly(ɛ-caprolactone). Their swelling and dynamic rheological properties were investigated with respect to the effects of feed compositions. It was found that the swelling ratio, storage modulus and loss modulus of the resulting hydrogel increased with the increase of MAH-CD amount. Incorporation of MAH-CD resulted in strong viscoelastic system with dominating elastic behavior.     

Characterization of surgical adhesives from UV-polymerized poly(PEG dimethacrylate-co-2-hydroxyethyl methacrylate) copolymers

Polymer samples that could be used as wound adhesives were prepared from poly(ethylene glycol)dimethacrylate (PEGDMA) and 2-hydroxyethyl methacrylate (HEMA) copolymers in concentrations from 0 to 50 mol %. The UV copolymerization was initiated by 2,2-dimethoxy-2-phenylacetophenone (DMPA) and ultraviolet light intensities ranged from 0.1 to 0.5 m W/cm. The volume shrinkage during photopolymerization was observed using a dilatometric technique. The overall volume shrinkage was affected by the comonomer ratio and the nature of the PEGDMA comonomer. The rate of volume shrinkage was higher at higher ultraviolet light intensities. PEG(400)DMA-based copolymers exhibited lower glass transition temperatures than those of PEG(200)-based copolymers. The introduction of HEMA to the copolymers reduced both their glass transition and degradation temperatures. The equilibrium water-swelling ratio increased with increasing PEGDMA molecular weight and HEMA content. © 1995 John Wiley & Sons, Inc.     

Effect of macromer synthesis time on the properties of the resulting poly(β‐amino ester) degradable hydrogel

Poly(β‐amino ester) biodegradable hydrogels are common in biomedical applications because of their tunable properties and similarities to natural soft tissue. Previous work has shown property adjustments through the choice of monomers, the ratio between monomers and the addition of a crosslinking component. Here, we show that the reaction time for the creation of the macromer can affect the resulting hydrogel properties, and thus provides another method of tuning properties. Macromer was created through the reaction of isobutylamine with poly(ethylene glycol) diacrylate (n = 400). The reaction progress was analyzed using IR and GPC analysis. Hydrogels were created through UV photopolymerization from macromers synthesized for 24, 36, and 48 h. The degradation, compressive moduli, and swelling were measured in an aqueous solution. All showed significant differences between hydrogels of different macromer synthesis times. These differences likely stem from the incomplete macromer synthesis reaction and resulting PEG‐rich regions in hydrogels from shorter synthesis times. These regions will not readily degrade, but do increase the mechanical properties and extent of swelling. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and drug‐release behavior of minocycline‐loaded poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] films

In this work, biocompatible hydrogel matrices for wound‐dressing materials and controlled drug‐release systems were prepared from poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] [p(HEMA‐co‐PEG–MA] films via UV‐initiated photopolymerization. The characterization of the hydrogels was conducted with swelling experiments, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis (differential scanning calorimetry), and contact‐angle studies. The water absorbency of the hydrogel films significantly changed with the change of the medium pH from 4.0 to 7.4. The thermal stability of the copolymer was lowered by an increase in the ratio of poly(ethylene glycol) (PEG) to methacrylate (MA) in the film structure. Contact‐angle measurements on the surface of the p(HEMA‐co‐PEG–MA) films demonstrated that the copolymer gave rise to a significant hydrophilic surface in comparison with the homopolymer of 2‐hydroxyethyl methacrylate (HEMA). The blood protein adsorption was significantly reduced on the surface of the copolymer hydrogels in comparison with the control homopolymer of HEMA. Model antibiotic (i.e., minocycline) release experiments were performed in physiological buffer saline solutions with a continuous flow release system. The amount of minocycline release was shown to be dependent on the HEMA/PEG–MA ratio. The hydrogels have good antifouling properties and therefore are suitable candidates for wound dressing and other tissue engineering applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of poly(ethylene glycol)-derived crosslinkers on the properties of thermosensitive hydrogels

Three crosslinkers, poly(ethylene glycol) diacrylate (PEGDA), glycerol ethoxylate triacrylate (GETA) and citric acid-(PEG acrylate)₃ (CA-PEGTA) derived from poly(ethylene glycol) (PEG) were synthesized at first. The three series of poly (N-isopropylacrylamide) (PNIPAAm) hydrogels were prepared by photopolymerization with the crosslinkers and compared with a hydrogel based on commercial crosslinker, N,N′-methylene bis-acrylamide (NMBA). The influence of the crosslinker structures and contents on the swelling behaviour, mechanical properties, and drug release of the hydrogels was investigated. The results showed that the hydrogels based on PEGDA and NMBA exhibited the highest and the lowest swelling ratio, respectively. The content of crosslinker of all hydrogel series showed good thermosensitivity and thermo-reversibility. The critical gel transition temperature (CGTT) appeared at 32 °C for the hydrogel based on NMBA, but appeared at about 34 °C for other hydrogels due to higher hydrophilicity of the crosslinker. In the mechanical properties, three-arms crosslinker GETA and CA-PEGTA led to higher mechanical strength than a linear crosslinker PEGDA. A hydrogel based on GETA (NG6) showed the highest shear modulus of 656.9 kPa and Young’s modulus of 1655.0 kPa. The hydrogels containing higher content of crosslinker revealed lower swelling ratio and higher mechanical strength. In the drug release, the hydrogels with higher swelling ratios showed higher drug absorbed. The highest release percentage of caffeine and vitamin B12 for hydrogel based on PEGDA (NP6) could reach 68.3% and 75.4%, respectively. In addition, the bound water and toxicity of the hydrogels were also investigated.