Synthesis,characterization, and antimicrobial properties of oligo‐4‐[(pyridine‐3‐yl‐methylene) amino] phenol

The oxidative polycondensation reaction conditions of 4‐[(pyridine‐3‐yl‐methylene) amino]phenol (4‐PMAP) were studied using H₂O₂, atmospheric O₂, and NaOCl oxidants in an aqueous alkaline medium between 30°C and 90°C. Synthesized oligo‐4‐[(pyridine‐3‐yl‐methylene) amino] phenol (O‐4‐PMAP) was characterized by ¹H‐, ¹³C NMR, FTIR, UV–vis, size exclusion chromatography (SEC), and elemental analysis techniques. The yield of O‐4‐PMAP was found to be 32% (for H₂O₂ oxidant), 68% (for atmospheric O₂ oxidant), and 82% (for NaOCl oxidant). According to the SEC analysis, the number–average molecular weight, weight–average molecular weight, and polydispersity index values of O‐4‐PMAP was found to be 5767, 6646 g mol^?1, and 1.152, respectively, using H₂O₂, and 4540, 5139 g mol^?1, and 1.132, respectively, using atmospheric O₂, and 9037, 9235 g mol^?1, and 1.022, using NaOCl, respectively. According to TG and DSC analyses, O‐4‐PMAP was more stable than 4‐PMAP against thermal decomposition. The weight loss of O‐4‐PMAP was found to be 94.80% at 1000°C. Also, antimicrobial activities of the oligomer were tested against B. cereus, L. monocytogenes, B. megaterium, B. subtilis, E. coli, Str. thermophilus, M. smegmatis, B. brevis, E. aeroginesa, P. vulgaris, M. luteus, S. aureus, and B. jeoreseens. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3327–3333, 2006     

Synthesis of poly(1‐hexene)s end‐functionalized with phenols

Electrophilic alkylations of phenol/2,6‐dimethylphenol were performed with vinylidene‐terminated poly(1‐hexene)s using BF₃·OEt₂ catalyst. Vinylidene‐terminated poly(1‐hexene)s with M_n varying from 400 to 10000 were prepared by bulk polymerization of 1‐hexene at 50 to ?20 °C using Cp₂ZrCl₂/MAO catalysts. The phenol/2,6‐dimethylphenol‐terminated poly(1‐hexene)s was characterized by NMR (¹H, ¹³C), UV, IR and vapor phase osmometer (VPO). The isomer distribution (ortho, para and ortho/para) was determined by ¹³P NMR using a phosphitylating reagent, namely 2‐chloro‐1,3,2‐dioxaphospholane. The number‐average degree of functionality (F_n) >0.9 with >95% para selectivity could be achieved using low‐molecular‐weight oligomers of poly(1‐hexene)s. Copyright © 2005 Society of Chemical Industry     

Synthesis,characterization, conductivity,band gap,and kinetic of thermal degradation of poly‐4‐[(2‐mercaptophenyl) imino methyl] phenol

The oxidative polycondensation reaction conditions of 4‐[(2‐mercaptophenyl) imino methyl] phenol (2‐MPIMP) were studied in an aqueous acidic medium between 40 and 90°C by using oxidants such as air, H₂O₂, and NaOCl. The structures of the synthesized monomer and polymer were confirmed by FTIR, ¹H NMR, ¹³C NMR, and elemental analysis. The characterization was made by TGA‐DTA, size exclusion chromatography (SEC) and solubility tests. At the optimum reaction conditions, the yield of poly‐4‐[(2‐mercaptophenyl) imino methyl]phenol (P‐2‐MPIMP) was found to be 92% for NaOCl oxidant, 84% for H₂O₂ oxidant 54% for air oxidant. According to the SEC analysis, the number‐average molecular weight (M_n), weight‐average molecular weight (M_w), and polydispersity index values of P‐2‐MPIMP were found to be 1700 g mol^?1, 1900 g mol^?1, and 1.118, using H₂O₂; 3100 g mol^?1, 3400 g mol^?1, and 1.097, using air; and 6750 g mol^?1, 6900 g mol^?1, and 1.022, using NaOCl, respectively. According to TG analysis, the weight losses of 2‐MPIMP and P‐2‐MPIMP were found to be 95.93% and 76.41% at 1000°C, respectively. P‐2‐MPIMP showed higher stability against thermal decomposition. Also, electrical conductivity of the P‐2‐MPIMP was measured, showing that the polymer is a typical semiconductor. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, and the electrochemical energy gaps (E′_g) of 2‐MPIMP and P‐2‐MPIMP were found to be ?6.13, ?6.09; ?2.65, ?2.67; and 3.48, 3.42 eV, respectively. Kinetic and thermodynamic parameters of these compounds investigated by MacCallum‐Tanner and van Krevelen methods. The values of the apparent activation energies of thermal decomposition (E_a), the reaction order (n), pre‐exponential factor (A), the entropy change (ΔS*), enthalpy change (ΔH*), and free energy change (ΔG*) were calculated from the TGA curves of compounds. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis,characterization, and kinetic of thermal degradation of oligo‐2‐[(4‐bromophenylimino)methyl]phenol and oligomer‐metal complexes

Oligo‐2‐[(4‐bromophenylimino)methyl]phenol (OBPIMP) was synthesized from the oxidative polycondensation reaction of 2‐[(4‐bromophenylimino)methyl]phenol (BPIMP) with air and NaOCl oxidants in an aqueous alkaline medium between 50 and 90°C. The yield of OBPIMP was found to be 67 and 88% for air and NaOCl oxidants, respectively. Their structures were confirmed by elemental and spectral such as IR, ultraviolet–visible spectrophotometer (UV–vis), ¹H‐NMR, and ¹³C‐NMR analyses. The characterization was made by TG‐DTA, size exclusion chromatography, and solubility tests. The resulting complexes were characterized by electronic and IR spectral measurements, elemental analysis, AAS, and thermal studies. According to TG analyses, the weight losses of OBPIMP, and oligomer‐metal complexes with Co⁺², Ni⁺², and Cu⁺² ions were found to be 93.04%, 59.80%, 74.23%, and 59.30%, respectively, at 1000°C. Kinetic and thermodynamic parameters of these compounds investigated by Coats‐Redfern, MacCallum‐Tanner, and van Krevelen methods. The values of the apparent activation energies of thermal decomposition (E_a), the reaction order (n), preexponential factor (A), the entropy change (ΔS*), enthalpy change (ΔH*), and free energy change (ΔG*) obtained by earlier‐mentioned methods were all good in agreement with each other. It was found that the thermal stabilities of the complexes follow the order Cu(II) > Co(II) > Ni(II). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Viscosity/molecular‐weight relationship for γ‐(2,3‐dihydroxypropoxy)propyl‐terminated poly(dimethylsiloxane)s

A series of γ‐(2,3‐dihydroxypropoxy)propyl‐terminated poly(dimethylsiloxane) (DHT‐PDMS) samples with different molecular weights were prepared through the acid‐catalyzed equilibrium copolymerization of octamethylcyclotetrasiloxane and 1,3‐bis[γ‐(2,3‐dihydroxypropoxy)propyl]tetramethyldisiloxane. The intrinsic viscosity in toluene ([η]_toluene) and the number‐average molecular weight (M_n) were determined with an Ubbelohde viscometer and ¹H‐NMR spectra, respectively. In this way, the relationship between [η]_toluene and M_n was established. For 2.0 × 10⁴ < M_n < 4.0 × 10⁴, [η]_{toluene,25°C} was 1.874M_n ^0.323. The solution behavior of DHT‐PDMS was also investigated. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1759–1762, 2004     

Synthesis of star‐shaped poly(ϵ‐caprolactone) by samarium‐based tetrafunctional initiator and its dilute‐solution properties

An in situ–generated tetrafunctional samarium enolate from the reduction of 1,1,1,1‐tetra(2‐bromoisobutyryloxymethyl)methane with divalent samarium complexes [Sm(PPh₂)₂ and SmI₂] in tetrahydrofuran has proven to initiate the ring‐opening polymerization of ?‐caprolactone (CL) giving star‐shaped aliphatic polyesters. The polymerization proceeded with quantitative conversions at room temperature in 2 h and exhibited good controllability of the molecular weight of polymer. The resulting four‐armed poly(?‐caprolactone) (PCL) was fractionated, and the dilute‐solution properties of the fractions were studied in tetrahydrofuran and toluene at 30°C. The Mark–Houwink relations for these solvents were [η] = 2.73 × 10^?2M_w^0.74 and [η] = 1.97 × 10^?2M_w^0.75, respectively. In addition, the unperturbed dimensions of the star‐shaped PCL systems were also evaluated, and a significant solvent effect was observed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 175–182, 2006     

Synthesis and characterization of poly(ester‐ether‐imide)s derived from 5‐(4‐trimellitimidophenoxy)‐1‐trimellitimido naphthalene

A series of novel aromatic poly(ester‐ether‐imide)s with inherent viscosity values of 0.44–0.74 dL g^?1 were prepared by the diphenylchlorophosphate‐activated direct polycondensation of an imide ring‐containing diacid namely 5‐(4‐trimellitimidophenoxy)‐1‐trimellitimido naphthalene ( 1 ) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. Owing to comparison of the characterization data, an ester‐containing model compound ( 2 ) was also synthesized by the reaction of 1 with phenol. The model compound 2 and the resulted polymers were fully characterized by FT‐IR and NMR spectroscopy. The ultraviolet λ_max values of the poly(ester‐ether‐imide)s were also determined. The resulting polymers exhibited an excellent organosolubility in a variety of high polar solvents such as N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethyl sulfoxide, and N‐methyl‐2‐pyrrolidone. They were soluble even in common less polar organic solvents such as pyridine, m‐cresol, and tetrahydrofuran on heating. Crystallinity of the polymers was estimated by means of wide‐angle X‐ray diffraction. The resulted polymers exhibited nearly an amorphous nature. From differential scanning calorimetry thermograms, the polymers showed glass‐transition temperatures between 221 and 245°C. Thermal behaviors of the obtained polymers were characterized by thermogravimetric analysis, and the 10% weight loss temperatures of the poly(ester‐ether‐imide)s were found to be over 410°C in nitrogen. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characteristics of a novel aliphatic polycarbonate,poly[(propylene oxide)‐co‐(carbon dioxide)‐co‐(γ‐butyrolactone)]

A novel aliphatic polycarbonate, poly[(propylene oxide)‐co‐(carbon dioxide)‐co‐(γ‐butyrolactone)] [P(PO? CO₂? GBL)], was synthesized by the copolymerization of carbon dioxide, propylene oxide (PO) and γ‐butyrolactone (GBL). The resulting copolymers were determined by FTIR and NMR spectral analysis with viscosity‐average molecular weights (M_v) from 50 000 to 120 000 g mol^?1. According to elemental analysis, the calculated data of elemental contents in P(PO? CO₂? GBL)44 were close to the found data. The result showed that GBL was inserted into the backbone of poly[(propylene oxide)‐co‐(carbon dioxide)] successfully. GBL offered an ester structural unit that gave the copolymer better degradability. The correlations between reaction conditions and properties were studied. When GBL content increased, the M_v and the glass transition temperature (T_g) of the copolymers improved relative to an identical copolymer without GBL. Prolonging the reaction time of the copolymerization resulted in increases in M_v and T_g. P(PO? CO₂? GBL) exhibited a high T_g above 40 °C. The rate of backbone degradation increased with increasing GBL content. Copyright © 2005 Society of Chemical Industry     

Polyimides derived from 1,4‐bis [3‐oxy‐(N‐aminophthalimide)] benzene

A novel diamine, 1,4‐bis [3‐oxy‐(N‐aminophthalimide)] benzene (BOAPIB), was synthesized from 1,4‐bis [3‐oxy‐(N‐phenylphthalimide)] benzene and hydrazine. Its structure was determined via IR, ¹H NMR, and elemental analysis. A series of five‐member ring, hydrazine‐based polyimides were prepared from this diamine and various aromatic dianhydrides via one‐step polycondensation in p‐chlorophenol. The inherent viscosities of these polyimides were in the range of 0.17–0.61 dL/g. These polymers were soluble in polar aprotic solvents and phenols at room temperature. Thermogravimetric analysis (TGA) showed that the 5% weight‐loss temperatures of the polyimides were near 450°C in air and 500°C in nitrogen. Dynamic mechanical thermal analysis (DMTA) indicated that the glass‐transition temperatures (T_gs) of these polymers were in the range of 265–360°C. The wide‐angle X‐ray diffraction showed that all the polyimides were amorphous. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and properties of new novolacs based on heteroatom‐bridged phenol derivatives

We describe the synthesis and properties of new novolacs prepared by addition‐condensation of heteroatom‐bridged phenol derivatives and formaldehyde. The trifluoroacetic acid‐catalyzed polymerization of equimolar amounts of bis(4‐methoxyphenyl) ether ( 1a ) and formaldehyde proceeded homogeneously to afford the polymer ( 2a ) in 49% yield (M_n 2600, M_w/M_n 1.8). From the FTIR, ¹H‐NMR, and ¹³C‐NMR spectra of 2a , it was evident that the polymer had methylene moieties‐bridged repeating units in the polymer backbone. A higher molecular weight novolac ( 2a ′) (yield 99%, M_n 16,600, M_w/M_n 12.9) could be prepared by using an excess of formaldehyde. Bis(4‐methoxyphenyl) sulfone novolac ( 2b ) (M_n 1300, M_w/M_n 1.2) and bis(4‐methoxyphenyl) sulfide novolac ( 2d ) (M_n 1200, M_w/M_n 1.9) were also prepared. However, the polymerization of bis(4‐hydroxyphenyl) sulfone ( 1c ) did not proceed, even when it was attempted under various reaction conditions. From TGA, the temperatures at 10% loss in weight (T₁₀) for 2a , 2a ′, and 2b were found to be 413, 430 and 393°C, respectively. These results suggested that heteroatom‐bridged novolacs based on phenol derivatives have good thermal stability than other organosoluble polymers; moreover, these novolacs could be expected to function as processable materials, polymer blends for engineering plastics, etc. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of ternary‐copolymer of soluble fluorinated polyimides based on 1,4‐bis (4‐amino‐2‐trifluoromethylphenoxy) benzene

A series of novel ternary‐copolymer of fluorinated polyimides (PIs) were prepared from 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzene (pBATB), commercially available aromatic dianhydrides, and aromatic diamines via a conventional two‐step thermal or chemical imidization method. The structures of all the obtained PIs were characterized with FTIR, ¹H‐NMR, and element analysis. Besides, the solubility, thermal stability, mechanical properties, and moisture uptakes of the PIs were investigated. The weight‐average molecular weight (M_w) and the number‐average molecular weight (M_n) of the PIs were determined using gel‐permeation chromatography (GPC). The PIs were readily dissolved not only in polar solvents such as DMF, DMAc, and NMP, but also in some common organic solvents, such as acetic ester, chloroform, and acetone. The glass transition temperatures of these PIs ranged from 201 to 234°C and the 10% weight loss temperatures ranged from 507 to 541°C in nitrogen. Meanwhile, all the PIs left around 50% residual even at 800°C in nitrogen. The GPC results indicated that the PIs possessed moderate‐to‐high number‐average molecular weight (M_n), ranging from 9609 to 17,628. Moreover, the polymer films exhibited good mechanical properties, with elongations at break of 8–21%, tensile strength of 66.5–89.8 MPa, and Young's modulus of 1.04–1.27 GPa, and low moisture uptakes of 0.54–1.13%. These excellent combination properties ensure that the polymer could be considered as potential candidates for photoelectric and microelectronic applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis,characterization, and thermal degradation of oligo‐2‐(morpholinoiminomethyl)phenol and its Pb(II) complex compound

The oxidative polycondensation reaction conditions of 2‐(morpholinoiminomethyl)phenol were studied with H₂O₂, air O₂, and sodium hypochloride (NaOCl) oxidants in an aqueous alkaline medium between 40 and 90°C. The structure of oligo‐2‐(morpholinoiminomethyl)phenol was characterized with ¹H‐ and ¹³C‐NMR, Fourier transform infrared, ultraviolet–visible, size exclusion chromatography, and elemental analysis techniques. Under the optimum reaction conditions, the yield of oligo‐2‐(morpholinoiminomethyl)phenol was 28% for the H₂O₂ oxidant, 12% for the air O₂ oxidant, and 58% for the NaOCl oxidant. According to the size exclusion chromatography analysis, the number‐average molecular weight, weight‐average molecular weight, and polydispersity index of oligo‐2‐(morpholinoiminomethyl)phenol were 2420 g/mol, 2740 g/mol, and 1.187 with H₂O₂, 1425 g/mol, 2060 g/mol, and 1.446 with air O₂, and 1309 g/mol, 1401 g/mol, and 1.070 with NaOCl, respectively. Thermogravimetry/dynamic thermal analysis showed that the oligo‐2‐(morpholinoiminomethyl)phenol–lead complex compound was more stable than 2‐(morpholinoiminomethyl)phenol and oligo‐2‐(morpholinoiminomethyl)phenol against thermal degradation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:3795–3804, 2006     

Synthesis,thermal, and dynamic mechanical properties of 1,3‐bis(diphenylsilyl)‐2,2,4,4‐tetraphenylcyclodisilazane‐containing polydimethylsiloxanes

New and effective approaches to the synthesis of 1,3‐bis(diphenylsilyl)‐2,2,4,4‐tetraphenylcyclodisilazane‐containing polydimethylsiloxanes ( P1 and P2 ) were developed. P1 was obtained by polycondensation of cyclodisilazane lithium salt and chloroterminated polydimethylsiloxane. P2 was produced by hydrosilylation of vinyl‐terminated cyclodisilazane and hydrogen‐terminated polydimethylsiloxane. The polycondensation completed quickly at room temperature, while the hydrosilylation was facile and did not require cumbersome air‐sensitive operations. P1 and P2 were characterized by Fourier transform infrared, nuclear magnetic resonance, gel permeation chromatography, differential scanning calorimetry, thermogravimetric analysis (TGA), and isothermal gravimetric analysis (IGA). TGA revealed the outstanding thermal properties of P1 and P2 with 5% weight loss temperatures (T_d5) higher than 450°C. IGA proved their better thermal stability at 450°C for 800 min, compared to polydimethyldiphenylsiloxane. Dynamic mechanical analysis showed that silicone rubbers made from cyclodisilazane‐containing polydimethylsiloxanes could have a maximum tan δ value as high as 1.13 and had good prospects for damping material applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis,characterization, ion‐exchange,and antimicrobial study of poly[(2‐hydroxy‐4‐methoxybenzophenone) propylene] resin and its polychelates with lanthanides (III)

The polymeric ligand (resin) was prepared from 2‐hydroxy‐4‐methoxybenzophenone with 1,3‐propane diol in the presence of polyphosphoric acid as a catalyst on constant heating at 160°C for 13 h. The poly[(2‐hydroxy‐4‐methoxybenzophenone) propylene] (HMBP‐PD) form 1 : 2 metal/ligand polychelates (metal–polymer complexes) with La(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), and Dy(III). The polymeric ligand and its polychelates (metal–polymer complexes) were characterized on the basis of elemental analyses, electronic spectra, magnetic susceptibilities, IR‐spectroscopy, NMR, and thermogravimetric analyses. The molecular weight was determined using number average molecular weight (M_n) by a vapor pressure osmometry (VPO) method. Activation energy ( E ) of the resin was calculated from differential scanning calorimetry (DSC). All the polychelates are paramagnetic in nature except La(III). Ion‐exchange studies at different electrolyte concentrations, pH, and rate have been carried out for lanthanides(III) metal ions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and Characterization of 3,4,5‐Triamino‐1,2,4‐Triazolium 5‐Nitrotetrazolate

3,4,5‐Triamino‐1,2,4‐triazolium 5‐nitrotetrazolate ( 2 ) was synthesized in high yield from 3,4,5‐triamino‐1,2,4‐triazole (guanazine) ( 1 ) and ammonium 5‐nitrotetrazolate. The new compound 2 was characterized by vibrational (IR and Raman) and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁵N), elemental analysis and single crystal X‐ray diffraction (triclinic, P(‐1), a=0.7194(5), b=0.8215(5), c=0.8668(5) nm, α=75.307(5), β=70.054(5), γ=68.104(5)°, V=0.4421(5) nm³, Z=2, ϱ=1.722 g cm⁻¹, R₁=0.0519 [F>4σ(F)], wR₂(all data)=0.1154). The ¹⁵N NMR spectrum and X‐ray crystal structure (triclinic, P‐1, a=0.5578(5), b=0.6166(5), c=0.7395(5) nm, α=114.485(5)°, β=90.810(5)°, γ=97.846(5)°, V=0.2286(3) nm³, Z=2, ϱ=1.658 g cm⁻¹, R₁=0.0460 [F>4σ(F)], wR₂(all data)=0.1153) of 1 were also determined.     

Synthesis and characterization of 4,4′‐diaminodiphenyl methane‐based benzoxazines and their polymers

A series of diamine‐based benzoxazine precursors have been prepared using 4,4′‐diaminodiphenyl methane, formaldehyde, and different phenol derivatives including phenol, p‐cresol, and 2‐naphthol. Their chemical structures were identified by FTIR, ¹H NMR, and elemental analysis. The curing reactions of those precursors were monitored by FTIR and DSC. The obtained materials exhibited higher glass transition temperature and char yields than the corresponding bisphenol‐A based polybenzoxazines. The polybenzoxazine prepared from phenol showed the highest char yields of 65% and thermal stability with 5 and 10% weight‐loss temperatures at 346 and 432°C, respectively. The polybenzoxazine prepared from 2‐naphthol exhibited the highest glass transition temperature at 244°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis,characterization and thermal degradation of poly[2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate]

In this work, 2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate (BPHEMA) [monomer] was synthesized by the addition of methacrylic acid to 1‐epoxyethyl‐3‐bromophenyl‐3‐methyl cyclobutane. The monomer and poly(BPHEMA) were characterized by FT‐IR and [¹H] and [¹³C]NMR. Average molecular weight, glass transition temperature, solubility parameter, and density of the polymer were also determined. Thermal degradation of poly[BPHEMA] was studied by thermogravimetry (TG), FT‐IR. Programmed heating was carried out at 10 °C min⁻¹ from room temperature to 500 °C. The partially degraded polymer was examined by FT‐IR spectroscopy. The degradation products were identified by using FT‐IR, [¹H] and [¹³C]NMR and GC‐MS techniques. Depolymerization is the main reaction in thermal degradation of the polymer up to about 300 °C. Percentage of the monomer in CRF (Cold Ring Fraction) was estimated at 33% in the peak area of the GC curve. Intramolecular cyclization and cyclic anhydride type structures were observed at temperatures above 300 °C. The liquid products of the degradation, formation of anhydride ring structures and mechanism of degradation are discussed. © 1999 Society of Chemical Industry     

Synthesis and optical properties of cholesteric liquid‐crystalline oligomers displaying reversible thermochromism

A series of side‐chain liquid crystalline oligomers (P₁–P₇) have been synthesized with cyclo(methylhydrogeno)siloxane and two cholesteric liquid crystalline monomers cholesteryl 4‐(10‐undecylen‐1‐yloxy)benzoate (M₁) and cholesterol 4‐{6‐[(4‐(allyloxyl)‐benzoyl]‐hexanoxocarbonyl}‐benzoate (M₂). The chemical structures and liquid crystalline properties of the synthesized oligomers were investigated using various experimental techniques such as FTIR, ¹H‐NMR, DSC, POM, and XRD. All monomers and chiral oligomers show a cholesteric mesophase with very wide mesophase temperature ranges. They appear highly thermally stable with decomposition temperatures (T_d) at 5% weight loss greater than 300°C. The optical properties of the oligmers have been characterized by reflection spectra and optical rotation analysis. All synthesized oligomers display colors at room temperature, and show reversible thermochromism within a wide temperature range (>120°C). The λ_max values of the oligomers also nearly coincide during the first, second, and third heating cycles. The specific rotation of each oligomer is very sensitive to temperature, and the specific rotation value of P₃ smoothly changes from ?21.7° to ?0.7° when it is heated. The optical properties of the oligomers offer tremendous potential for various optical applications. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1321‐1327, 2013     

Molecular architectures of four‐arm star‐shaped styrene‐butadiene copolymer

To understand the molecular architectures of styrene‐butadiene four‐arm star (SBS) copolymers, a size exclusion chromatography combined with laser light scattering (SEC‐LLS) has been used to determine their weight‐average molecular weight (M_w) and radius of gyration (〈S²〉^1/2), and a new method for the establishment of the Mark‐Houwink equation from one sample has been developed. Based on the Flory viscosity theory, we successfully have reduced the 〈S²〉^1/2 values of numberless fractions estimated from many experimental points in the SEC chromatogram to intrinsic viscosities ([η]). For the first time, the dependences of 〈S²〉^1/2 and [η] on M_w for the four‐arm star SBS in tetrahydrofuran at 25°C were found, respectively, to be 〈S²〉^1/2 = 2.62 × 10^?2 M (nm) and [η] = 3.68 × 10^?2 M (mL/g) in the M_w range from 1.4 × 10⁵ to 3.0 × 10⁵. From data of [η] and 〈S²〉^1/2 for linear and star SBS, we have obtained the information about the branching, namely, the ratios (g and g′) of 〈S²〉 and [η] for star SBS to that of the linear SBS of the same molecular weight, which agree with theoretical predictions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 961–965, 2005     

Synthesis and characterization of copolymeric aliphatic–aromatic esters derived from terephthalic acid, 1,4‐butanediol,and ε‐caprolactone by physical,thermal, and mechanical properties and NMR measurements

In this study, a series of aliphatic–aromatic poly(butylene terephthalate‐co‐ε‐caprolactone) (PBTCL) copolyesters were synthesized from various monomeric compositions of terephthalic acid (TPA), 1,4‐butanediol (BDO), and ε‐caprolactone (CL) in the presence of tetrabutyl titanate (Ti(Obu)₄) and stannous octoate (Sn(Oct)₂) as catalysts through a combination of polycondensation and ring opening polymerization. A significant increase in the melting temperature (T_m) of copolyesters was observed by increasing the TPA/(CL+TPA) molar ratio, starting from the low end (T_m 66.2°C) of pure poly‐ε‐caprolactone PCL upward. We found that PBTCL‐50, which has a TPA/(CL+TPA) 50% molar ratio and polycondensation at 260°C for 1.5 h, resulted in a proper T_m of 139.2°C that facilitates thermal extrusion from biomass or other biodegradable polymers of similar T_m. The number–average molecular weight (M_n) of 7.4 × 10⁴ for PBTCL‐50 was determined from the intrinsic viscosity [η] by using the Berkowitz model of M_n = 1.66 × 10⁵[η]^0.9. Good mechanical properties of PBTCL‐50 have been shown by tensile stretching experiment that indicates tensile strength, elongation, and Young's modulus are 11.9 MPa, 132%, and 257 MPa, respectively. Polymers with aforementioned properties are suitable for manufacturing biodegradable plastic films for downstream agricultural applications or merely for trash bag. This article reveals that the PBTCL‐50 contains all five monomers with different molar ratios and characteristical linkages between each other. The novel structure was furthermore analyzed by ¹H‐ and ¹³C‐NMR spectroscopy. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013