Hydrolytic Degradation of Amorphous Films of L‐Lactide Copolymers with Glycolide and D‐Lactide

Summary: Films of poly(L ‐lactic acid) (PLLA) and copolymers of L ‐lactide (LLA) with either glycolide [P(LLA‐GA)](81/19) or D ‐lactide [P(LLA‐DLA)](77/23) were prepared and an effect of comonomer type on the hydrolytic degradation of the films was studied in phosphate‐buffered solutions at 37 °C. The degraded films were investigated using gravimetry (weight loss and water absorption), gel permeation chromatography, DSC, X‐ray diffractometry, tensile testing and polarization optical microscopy. To exclude the effects of molecular weight and crystallinity on hydrolytic degradation, the films were prepared from polymers with similar molecular weights and were made amorphous by melt quenching. It was found that the hydrolytic degradation rate decreased in the order P(LLA‐GA) > P(LLA‐DLA) > PLLA. The hydrolytic degradation rate constant of PLLA and LLA copolymer films increased with increasing the water absorption (hydrophilicity), or with decreasing the initial glass transition temperature or the L ‐lactyl unit sequence length, indicating that the hydrolytic degradation rate of the copolymers was closely related to these three parameters. The crystallization of P(LLA‐GA) film occurred within hydrolytic degradation for 20 weeks.

M_n of PLLA and LLA copolymer films as a function of hydrolytic degradation time.     

Synthesis and characterization of AB‐type copolymers poly(L‐lactide)‐block‐poly(methyl methacrylate) via a convenient route combining ROP and ATRP from a dual initiator

Diblock copolymers of poly(L ‐lactide)‐block‐poly(methyl methacrylate) (PLLA‐b‐PMMA) were synthesized through a sequential two‐step strategy, which combines ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP), using a bifunctional initiator, 2,2,2‐trichloroethanol. The trichloro‐terminated poly(L ‐lactide) (PLLA‐Cl) with high molecular weight (M_n,GPC = 1–12 × 10⁴ g/mol) was presynthesized through bulk ROP of L ‐lactide (L ‐LA), initiated by the hydroxyl group of the double‐headed initiator, with tin(II) octoate (Sn(Oct)₂) as catalyst. The second segment of the block copolymer was synthesized by the ATRP of methyl methacrylate (MMA), with PLLA‐Cl as macroinitiator and CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as catalyst, and dimethyl sulfoxide (DMSO) was chosen as reaction medium due to the poor solubility of the macroinitiator in conventional solvents at the reaction temperature. The trichloroethoxyl terminal group of the macroinitiator was confirmed by Fourier transform infrared spectroscopy (FTIR) and ¹H‐NMR spectroscopy. The comprehensive results from GPC, FTIR, ¹H‐NMR analysis indicate that diblock copolymers PLLA‐b‐PMMA (M_n,GPC = 5–13 × 10⁴ g/mol) with desired molecular composition were obtained by changing the molar ratio of monomer/initiator. DSC, XRD, and TG analyses establish that the crystallization of copolymers is inhibited with the introduction of PMMA segment, which will be beneficial to ameliorating the brittleness, and furthermore, to improving the thermal performance. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Water vapor permeability of poly(lactide)s: Effects of molecular characteristics and crystallinity

Amorphous‐made poly(L ‐lactide) [i.e., poly(L ‐lactic acid) (PLLA)], poly(L ‐lactide‐co‐D ‐lactide)[P(LLA‐DLA)](77/23), and P(LLA‐DLA)(50/50) films and PLLA films with different crystallinity (X_c) values were prepared, and the effects of molecular weight, D ‐lactide unit content (tacticity and optical purity), and crystallinity of poly(lactide) [i.e., poly(lactic acid) (PLA)] on the water vapor permeability was investigated. The changes in number‐average molecular weight (M_n) of PLLA films in the range of 9 × 10⁴–5 × 10⁵ g mol^?1 and D ‐lactide unit content of PLA films in the range of 0–50% have insignificant effects on their water vapor transmission rate (WVTR). In contrast, the WVTR of PLLA films decreased monotonically with increasing X_c from 0 to 20%, while leveled off for X_c exceeding 30%. This is probably due to the higher resistance of “restricted” amorphous regions to water vapor permeation compared with that of the “free” amorphous regions. The free and restricted amorphous regions are major amorphous components of PLLA films for X_c ranges of 0–20% and exceeding 30%, respectively, resulting in the aforementioned dependence of WVTR on X_c. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Synthesis and properties of crystalline dicarboxylated poly(L‐lactic acid) prepolymers

Crystalline dicarboxylated poly(L ‐lactic acid)s (dcPLLAs) with number‐average molecular weights (M_n's) of 10³ to 10⁴ g/mol were synthesized via the melt polycondensation of L ‐lactic acid (LLA) in the presence of succinic anhydride (SAD), with tin(II) chloride and toluene‐4‐sulfonic acid as binary catalysts. They were characterized by end‐group titration, ¹H‐NMR, differential scanning calorimetry, and wide‐angle X‐ray diffraction. The terminal COOH percentage reached over 98%, and the molecular weight could be controlled by the molar ratio of LLA to SAD. The thermal behaviors depended on the molecular weight. The poly(L ‐lactic acid)s (PLLAs) crystallized slowly for M_n ≤ 2000 but quickly for M_n ≥ 4000. The crystallinity increased from 27 to 40% when M_n grew from 4000 to 10,000. With comparison to ordinary PLLA, the dcPLLA had the same crystallization structure but a slightly lower crystallizability. The glass‐transition temperature was clearly higher than that of amorphous dcPLLAs. With a controllable molecular weight, high COOH percentage, and crystallinity, the dcPLLA with M_n ≥ 4000 appeared to be a suitable prepolymer for the preparation of high‐molecular‐weight crystalline PLLA via chain extension. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of poly(L‐lactide‐co‐ϵ‐caprolactone)‐b‐poly(L‐lactide) biodegradable diblock copolyesters: Effect of the block lengths on their thermal properties

Poly(L ‐lactide‐co‐ε‐caprolactone)‐b‐poly(L ‐lactide) [P(LL‐co‐CL)‐b‐PLL] diblock copolyesters were synthesized in a two‐step process with 1‐dodecanol (DDC) and stannous octoate as the initiating system. In the first‐step reaction, a 50:50 mol % amorphous poly(L ‐lactide‐co‐ε‐caprolactone) [P(LL‐co‐CL)] copolyester was synthesized via the bulk copolymerization of L ‐lactide and ε‐caprolactone, which was followed by the polymerization of the PLL crystalline block at the end chain in the second‐step reaction. The yielded copolyesters were characterized with dilute‐solution viscometry, gel permeation chromatography, ¹H‐ and ¹³C‐NMR, and differential scanning calorimetry methods. The molecular weights of the P(LL‐co‐CL) copolyesters from the first‐step reaction were controlled by the DDC concentrations, whereas in the second‐step reaction, the molecular weights of the P(LL‐co‐CL)‐b‐PLL diblock copolyesters depended on the starting P(LL‐co‐CL) copolyester molecular weights and L ‐lactide/prepolymer molar ratios. The starting P(LL‐co‐CL) copolyester molecular weights and PLL block lengths seemed to be the main factors affecting specific thermal properties, including the melting temperature (T_m), heat of melting (ΔH_m), crystallizing temperature (T_c), and heat of crystallizing (ΔH_c), of the final P(LL‐co‐CL)‐b‐PLL diblock copolyester products. T_m, ΔH_m, T_c, and ΔH_c increased when the PLL block lengths increased. However, these thermal properties of the diblock copolyesters also decreased when the P(LL‐co‐CL) block lengths increased. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Preparation and characterization of poly(L‐lactide) membranes prepared by γ‐radiation‐induced grafting of N‐vinyl pyrrolidone

A copolymer, poly(L ‐lactide)‐g‐poly(N‐vinyl pyrrolidone) (PLLA‐g‐PVP) was prepared with poly(L ‐lactide) (PLLA) and N‐vinyl pyrrolidone in the presence of methanol as a solvent by γ‐ray irradiation. The structure of PLLA‐g‐PVP was characterized by ¹H‐NMR and Fourier transform infrared spectroscopy. The PLLA‐g‐PVP graft ratio calculated by the percentage increase in weight increased with the increase of absorbed dose, and the percentage crystallinity of PLLA‐g‐PVP decreased with increasing graft ratio. The introduction of the poly(N‐vinyl pyrrolidone) chain into PLLA resulted in a decrease in the contact angle of PLLA‐g‐PVP with increasing graft ratio. In vitro degradation testing showed that PLLA‐g‐PVP had a higher degradation rate both in the weight‐loss test and molecular weight measurement because of a lower crystalline percentage and higher hydrophilicity compared to PLLA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Self‐assembly and degradation of poly[(2‐methacryloyloxyethyl phosphorylcholine)‐block‐(D,L‐lactide)] diblock copolymers: large compound micelles to vesicles

Biodegradable poly[(2‐methacryloyloxyethyl phosphorylcholine)‐block‐(D ,L ‐lactide)] (PMPC‐b‐PLA) diblock copolymers with various hydrophilic PMPC weight fractions (f_PC) will spontaneously self‐assemble into well‐defined vesicles and large compound micelles (LCMs) in water. Transmission electron microscopy, scanning electron microscopy, dynamic light scattering and fluorescence microscopy were used to observe their aggregate morphologies. The degradation of the LCMs was investigated and the loss of molecular weight of PLA blocks was confirmed using ¹H NMR analysis. The hydrolysis of PLA increases f_PC and consequently shifts the preferred morphology from LCMs to vesicles. Such degradation‐induced morphological transitions mean that the biocompatible and biodegradable LCMs have great application potential in drug delivery. Copyright © 2010 Society of Chemical Industry     

Synthesis and characterization of ABA type tri‐block copolymers derived from p‐dioxanone,L‐lactide and poly(ethylene glycol)

A series of triblock co‐polymers, consisting of a poly(ethylene glycol) (PEG) central block joined to two blocks of random p‐dioxanone‐co‐L ‐lactide copolymers were synthesized by ring‐opening polymerization of p‐dioxanone (PDO) and L ‐lactide (LLA) initiated by PEG in the presence of stannous 2‐ethylhexanoate catalyst. The resulting copolymers were characterized by various techniques including ¹H and ¹³C NMR and FTIR spectroscopies, gel permeation chromatography, inherent viscosity, wide‐angle X‐ray diffractometry (WAXD) and differential scanning calorimetry (DSC). The conversion of PDO and L ‐lactide into the polymer was studied various mole ratios and at different polymerization temperature from ¹H NMR spectra. Results of WAXD and DSC showed that the crystallinity of PEG macroinitiator was greatly influenced by the composition of PDO and L ‐lactide in the copolymer. The triblock copolymers with low molecular weight were soluble in water at below room temperature. © 2003 Society of Chemical Industry     

Fully bio‐based poly(ɛ‐capolactone)/poly(lactide) alternating multiblock supramolecular polymers: Synthesis,crystallization behavior,and properties

Supramolecular poly(?‐capolactone)/poly(lactide) alternating multiblock copolymers were prepared by UPy‐functionalized poly(lactide)‐b‐ poly(?‐capolactone)‐b‐ poly(lactide) copolymers. The prepared supramolecular polymers (SMPs) exhibit the characteristic properties of thermoplastic elastomers. The stereo multiblock SMPs (sc‐SMPs) were formed by blending UPy‐functionalized poly(l ‐lactide)‐b‐ PCL‐b‐ poly(l ‐lactide) (l ‐SMPs) and UPy‐functionalized poly(d ‐lactide)‐b‐ PCL‐b‐ poly(d ‐lactide) (d ‐SMPs) due to stereocomplexation of the PLLA and PDLA blocks. Sc‐SMPs with low content of d ‐SMPs (≤20%) are transparent, elastic solids, while those having high d ‐SMPs content are opaque, brittle solids. The effects of l ‐SMPs/d ‐SMPs mixing ratios on thermal, crystallization behaviors, crystal structure, mechanical and hydrophilic properties of sc‐SMPs were deeply investigated. The incorporation of UPy groups depresses the crystallization of polymer, and the stereocomplex formation accelerates the crystallization rate. The used initiator functionalized polyhedral oligomeric silsesquioxanes causes a different effect on the crystallization of PLA and PCL blocks. The tensile strength and elongation at break of l _d /d _d ‐SMPs (d represents the initiator diethylene glycol) are significantly larger than that of l _p /d _p ‐SMPs (p represents the initiator polyhedral oligomeric silsesquioxanes), and their heat resistance and hydrophilicity can be also modulated by the l ‐SMPs/d ‐SMPs mixing ratios and the different initiators. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45575.     

Degradation of poly(L‐lactide) by a mesophilic bacterium

A Gram negative, rod‐shaped mesophilic bacterium active for poly(L ‐lactide) (PLA) degradation was isolated through the enrichment culture and clear‐zone method. The isolated strain was identified to be Bordetella petrii PLA‐3 on the basis of 16S rDNA gene sequence analysis. B. petrii PLA‐3 was active not only for the degradation of low‐molecular‐weight PLA but also for the degradation of high‐molecular‐weight PLA. The strain seemed to attack the crystalline part of PLA as well as the amorphous region. The PLA film incubated in compost inoculated with the isolated strain lost its weight more notably and exhibited a lower molecular weight than that incubated in the sterilized compost without living microorganisms. Moreover, the profile of the cumulative amount of CO₂ after 20 days of burial in the sterilized compost and subsequent inoculation of the isolated strain into compost was nearly the same as that of CO₂ evolved from PLA buried in compost with the isolated strain at the very beginning when the time was shifted by 20 days. This indicated that not only the abiotic hydrolysis but also the microbial enzymes of the strain contributed to the initial chain cleavage of PLA molecules and resolved the doubt that PLA molecules should be initially cleaved into very low‐molecular‐weight substances by abiotic hydrolysis to be subsequently absorbed into and biodegraded by microorganisms. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

High molecular weight poly (L‐lactic acid) clay nanocomposites via solid‐state polymerization

We propose here, a novel technique to synthesize high molecular weight (MW) poly (L ‐lactic acid)‐clay nanocomposite (PLACN), via solid state polymerization (SSP). We synthesize prepolymer of PLACN (pre‐PLACN) from both, L ‐lactic acid and L ‐lactide, as starting materials. Synthesis of pre‐PLACN from L ‐lactic acid is carried out via in situ melt polycondensation (MP) of L ‐lactic acid oligomer, followed by SSP, to achieve high MW PLACN (M_w ∼ 138,000 Da). In case of L ‐lactide as the starting material, we prepare L ‐lactide–clay intercalated mixture which yields moderate MW pre‐PLACN during subsequent ring opening polymerization (ROP). Interestingly, ROP is performed by using hydroxyl functionalized ternary catalyst system (L ‐lactide–Sn(II) octoate–oligo (L‐lactic acid) complex), which provides the terminal hydroxyl end‐groups, required for step‐growth SSP. Pre‐PLACN MW is now increased to M_w ∼ 127,000 Da, by the subsequent SSP process. ¹H NMR analyses confirm that these end‐groups, are indeed consumed during SSP. During SSP, the PLACN also achieves up to 90% crystallinity, which may be due to the synchronization of the slow step‐growth SSP of poly(L ‐lactic acid) (PLA) with the crystallization kinetics. Optical purity of PLACNs is similar to that of neat PLA, whereas the thermal stability of PLACNs is significantly superior. As evidenced by wide‐angle X‐ray scattering/small‐angle X‐ray scattering analyses and in line with the literature, both, intercalated and exfoliated PLACN morphologies, have been synthesized, by suitable selection of clays. We also verify the correlation between the PLA semicrystalline morphology and the PLACN morphology, which is consistent with those of PLACN synthesized by other techniques. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

The ring‐opening polymerization of D,L‐lactide catalyzed by new complexes of Cu,Zn, Co,and Ni Schiff base derived from salicylidene and L‐aspartic acid

D ,L ‐lactide (LA) was first successfully ring‐opening polymerized in melt by Schiff base complexes K[ML]nH₂O [M = Cu(II), Zn(II), Co(II), Ni(II); n = 2, 2, 3, 3.5; H₃L = L‐aspartic acid‐salicylidene Schiff base], which were prepared by Schiff base ligand derived from salicylidene and L‐aspartic acid and corresponding acetates. The effects of various complexes, the molar ratio of K[ML]nH₂O/LA, the polymerization temperature, and time were studied in detail. The results show that all complexes studied have the ability to initiate the ring‐opening polymerization of D ,L ‐lactide in melt. More than 90% high polymerization conversion and narrow molecular weight distribution (MWD) can be obtained very easily. However, the Ni(II) complex shows better catalytic property than other complexes on the polymerization and the molecular weight (MW) of poly(D ,L ‐lactide) (PLA) produced. With a rise in temperature and a prolongation of time, the MW of PLA decreased remarkably. The MW of PLA prepared by all complexes is not very high, which might be related to the crystalline water of complexes. X‐ray study indicated that PLA produced by Ni(II) complex is an amorphous polymer. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3312–3315, 2002     

Effects of copolymer microstructure on the properties of electrospun poly(l‐lactide‐co‐ε‐caprolactone) absorbable nerve guide tubes

The main objective of this work has been to study the effects of copolymer microstructure, both chemical and physical, on the microporosity, in vitro hydrolytic degradability and biocompatibility of electrospun poly(l ‐lactide‐co‐ε‐caprolactone), PLC, copolymer tubes for potential use as absorbable nerve guides. PLC copolymers with L : C compositions of 50 : 50 and 67 : 33 mol % were synthesized via the ring‐opening copolymerization of l ‐lactide (L) and ε‐caprolactone (C) at 120°C for 72 h using stannous octoate (tin(II) 2‐ethylhexanoate) and n‐hexanol as the initiating system. Electrospinning was carried out from solution in a dichloromethane/dimethylformamide (7 : 3 v/v) mixed solvent at room temperature. The in vitro hydrolytic degradation of the electrospun PLC tubes was studied in phosphate buffer saline over a period of 36 weeks. The microporous tubes were found to be gradually degradable by a simple hydrolysis mechanism leading to random chain scission. At the end of the degradation period, the % weight retentions of the PLC 50 : 50 and 67 : 33 tubes were 15.6% and 70.2%, respectively. Pore stability during storage as well as cell attachment and proliferation of mouse fibroblast cells (L929) showed the greater potential of the PLC 67 : 33 tubes for use as temporary scaffolds in reconstructive nerve surgery. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4357–4366, 2013     

Nitroxide‐mediated synthesis of styrenic‐based segmented and tapered block copolymers using poly(lactide)‐functionalized TEMPO macromediators

Poly(styrene)‐poly(lactide) (PS‐PLA), poly (tert‐butyl styrene)‐poly(lactide) (PtBuS‐PLA) diblocks, and poly(tert‐butyl styrene)‐poly(styrene)‐poly(lactide) (PtBuS‐PS‐PLA) segmented and tapered triblocks of controlled segment lengths were synthesized using nitroxide‐mediated controlled radical polymerization. Well‐defined PLA‐functionalized macromediators derived from hydroxyl terminated TEMPO (PLA_T) of various molecular weights mediated polymerizations of the styrenic monomers in bulk and in dimethylformamide (DMF) solution at 120–130°C. PS‐PLA and PtBuS‐PLA diblocks were characterized by narrow molecular weight distributions (polydispersity index (M_w/M_n) < 1.3) when using the PLA_T mediator with the lowest number average molecular weight M_n= 6.1 kg/mol while broader molecular weight distributions were exhibited (M_w/M_n = 1.47‐1.65) when using higher molecular weight mediators (M_n = 7.4 kg/mol and 11.3 kg/mol). Segmented PtBuS‐PS‐PLA triblocks were initiated cleanly from PtBuS‐PLA diblocks although polymerizations were very rapid with PS segments ～ 5–10 kg/mol added within 3–10 min of polymerization at 130°C in 50 wt % DMF solution. Tapering from the PtBuS to the PS segment in semibatch mode at a lower temperature of 120°C and in 50 wt % DMF solution was effective in incorporating a short random segment of PtBuS‐ran‐PS while maintaining a relatively narrow monomodal molecular weight distribution (M_w/M_n ≈ 1.5). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis and characterization of the biomaterial poly(lactic acid‐co‐Nε‐carbobenzoyloxy‐L‐lysine) via direct melt copolymerization

With D,L ‐lactic acid and N^ϵ‐carbobenzoyloxy‐L ‐lysine [Lys(Z)] as the starting monomer material and tin dichloride as the catalyst, the drug carrier material poly(lactic acid‐co‐N^ϵ‐carbobenzoyloxy‐L ‐lysine) was synthesized via direct melt polycondensation. The copolymer was systematically characterized with intrinsic viscosity testing, Fourier transform infrared spectroscopy, ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and X‐ray diffraction. The influences of different feed molar ratios were examined. With increasing molar feed content of Lys(Z), the intrinsic viscosity, weight‐average molecular weight, and polydispersity index (weight‐average molecular weight/number‐average molecular weight) gradually decreased. Because of the introduction of Lys(Z) with a big aromatic ring into the copolymer, the glass‐transition temperature gradually increased with increasing feed charge of Lys(Z), and all of the copolymers were amorphous. The copolymers, with weight‐average molecular weights from 10,500 to 6900 Da, were obtained and could reach the molecular weight level of poly(lactic acid) modified by Lys(Z) via the ring‐opening polymerization of the cyclic intermediates, such as lactide and morpholine‐2,5‐dione. However, a few terminal carboxyl groups might have been deprotected during the polymerization reaction under high temperatures. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Part 7. Effects of poly(L‐lactide‐co‐ϵ‐caprolactone) on morphology,structure, crystallization,and physical properties of blends of poly(L‐lactide) and poly(ϵ‐caprolactone)

Blended films of poly(L ‐lactide) [ie poly(L ‐lactic acid)] (PLLA) and poly(?‐caprolactone) (PCL) without or mixed with 10 wt% poly(L ‐lactide‐co‐?‐caprolactone) (PLLA‐CL) were prepared by solution‐casting. The effects of PLLA‐CL on the morphology, phase structure, crystallization, and mechanical properties of films have been investigated using polarization optical microscopy, scanning electron microscopy, differential scanning calorimetry and tensile testing. Addition of PLLA‐CL decreased number densities of spherulites in PLLA and PCL films, and improved the observability of spherulites and the smoothness of cross‐section of the PLLA/PCL blend film. The melting temperatures (T_m) of PLLA and PCL in the films remained unchanged upon addition of PLLA‐CL, while the crystallinities of PLLA and PCL increased at PLLA contents [X_PLLA = weight of PLLA/(weight of PLLA and PCL)] of 0.4–0.7 and at most of the X_PLLA values, respectively. The addition of PLLA‐CL improved the tensile strength and the Young modulus of the films at X_PLLA of 0.5–0.8 and of 0–0.1 and 0.5–0.8, respectively, and the elongation at break of the films at all the X_PLLA values. These findings strongly suggest that PLLA‐CL was miscible with PLLA and PCL, and that the dissolved PLLA‐CL in PLLA‐rich and PCL‐rich phases increased the compatibility between these two phases. © 2003 Society of Chemical Industry     

Stretch‐induced molecular ordering in amorphous/crystalline polylactide blends

The effect of amorphous poly(D ,L ‐lactide) (PDLLA) on the molecular orientation and crystallization of crystalline poly(L ‐lactide) (PLLA) on stretching is reported in this study. It is indicated that the presence of PDLLA in its miscible blends with PLLA is not favorable for either cohesive mesophase formation below T_g or strain‐induced crystallization above T_g at strains beyond the segmental extensibility limit. Because of lack of constraints imposed by cohesive mesophase or crystals, oriented segments are liable to slide each other or recoil, responsible for low‐molecular orientation in the stretched blends. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Short poly(ethylene glycol) block initiation of poly(l‐lactide) di‐block copolymers: a strategy for tuning the degradation of resorbable devices

The current range of medical applications of resorbable polyesters could be hugely expanded if more effective strategies for tailoring degradation rate were available. Block copolymerisation with poly(ethylene glycol) (PEG) has been shown to reduce degradation times; however, to date, this has relied on the addition of PEG to short lengths of polyester. This results in copolymers with high fractions of PEG and low molecular weights, reducing the potential range of applications. Furthermore, there has been no systematic study of the relative lengths of the blocks. In this work, we employed short hydroxyl‐functionalised methoxy‐terminated mPEG to initiate the synthesis of poly(l ‐lactide) (PLLA), resulting in controlled di‐block copolymers with short mPEG blocks and long PLLA blocks. A controlled series of polymers was made with PLLA lengths (60 < M_n (kg mol^?1) < 200) and mPEG lengths (550 < M_n (g mol^?1) < 5000) giving very low mPEG content (0.1–1.5 wt%). We found that, despite the low fraction of mPEG, water uptake and the rate of hydrolytic degradation, k, increased. Significantly, k for the polymers was dependent only on the presence of mPEG, and was little affected by mPEG length or PLLA length in the ranges studied. Moreover, mass loss began in all polymers when M_n of the polymer fell below a threshold of about 20 kg mol^?1 and depended on both the initial molecular weight of PLLA and the presence (but not the length) of mPEG. Short‐chain mPEG therefore provides a new route for targeted, temporal control of resorbable polyesters for biomedical devices. © 2018 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Effect of poly(l‐lactide)/poly(d‐lactide) block length ratio on crystallization behavior of star‐shaped asymmetric poly(l(d)‐lactide) stereoblock copolymers

Effect of Poly(l ‐lactide)/Poly(d ‐lactide) (PLLA/PDLA) block length ratio on the crystallization behavior of star‐shaped poly(propylene oxide) block poly(d ‐lactide) block poly (l ‐lactide) (PPO–PDLA–PLLA) stereoblock copolymers with molecular weights (M_n) ranging from 6.2 × 10⁴ to 1.4 × 10⁵ g mol^?1 was investigated. Crystallization behaviors were studied utilizing differential scanning calorimetry (DSC), polarized optical microscopy (POM), and wide‐angle X‐ray diffraction (WAXD). Only stereocomplex crystallites formed in isothermal crystallization at 140 to 156°C for all samples. On one hand, the overall crystallization rate decreased as PLLA/PDLA block length ratio increased. As PLLA/PDLA block length ratio increased from 7:7 to 28:7, the value of half time of crystallization (t_1/2) delayed form 2.85 to 5.31 min at 140°C. On the other hand, according to the Lauritzen–Hoffman theory, the fold‐surface energy (σ_e) was calculated. σ_e decreased from 77.7 to 73.3 erg/cm² with an increase in PLLA/PDLA block length ratio. Correspondingly increase in nucleation density was observed by the polarized optical microscope. Results indicated that the PLLA/PDLA block length ratio had a significant impact on the crystallization behavior of PPO–PDLA–PLLA copolymers. POLYM. ENG. SCI., 55:2534–2541, 2015. © 2015 Society of Plastics Engineers     

Influence of racemization on stereocomplex‐induced gelation of water‐soluble polylactide–poly(ethylene glycol) block copolymers

Ring‐opening polymerization of L ‐ or D ‐lactide was realized at 140 °C for a period of 7 days in the presence of dihydroxyl poly(ethylene glycol) (PEG), with M?_n = 4000 g mol^?1, using zinc lactate as initiator. The resulting poly(L ‐lactide)–PEG–poly(L ‐lactide) and poly(D ‐lactide)–PEG–poly(D ‐lactide) triblock copolymers are water soluble with polylactide (PLA) block length ranging from 11 to 17 units. Both the tube inverting method and rheological measurements were used to evaluate the gelation properties of aqueous solutions containing single copolymers or L /D copolymer pairs. Stereocomplexation between poly(L ‐lactide) and poly(D ‐lactide) blocks is observed for mixed solutions. Hydrogel formation is detected in the case of relatively long PLA blocks (DP _PLA = 17), but not for copolymers with shorter PLA blocks (DP _PLA = 11–13) due to partial racemization of L ‐lactyl units. Racemization is largely reduced when the reaction time is shortened to 1 day. Under these conditions, DP _PLA of 8 is sufficient for the stereocomplexation of PLA–PEG block copolymers, and DP _PLA above 10 leads to the formation of hydrogels of PLA–PEG block copolymers. On the other hand, racemization appears as a general phenomenon in the (co)polymerization of L ‐lactide with Zn(Lac)₂ as initiator, although it is negligible or undetectable in the case of high molar mass polymers. Therefore, racemization is the limiting factor for the stereocomplexation‐induced gelation of water‐soluble PLA–PEG block copolymers where the PLA block length generally ranges from 10 to 30. Reaction conditions including initiator, time and temperature should be strictly controlled to minimize racemization. Copyright © 2010 Society of Chemical Industry